In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)
by

1 Answer

Answer :

a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)
by

Related questions

In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Description : In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Last Answer : b.G41

CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Description : CNC machining centres do not include operations like a.milling b.boring c.welding d.tapping

Last Answer : c.welding

In which machine we get feedback? a.Lathe machine b.NC machine c.CNC machine d.Milling machine

Description : In which machine we get feedback? a.Lathe machine b.NC machine c.CNC machine d.Milling machine

Last Answer : c.CNC machine

The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Description : The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Last Answer : b.Tool length offset H

Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Description : Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Last Answer : a.5 axis CNC Milling

XY Plane Selection in CNC machining is done by….. a.G16 b.G17 c.G18 d.G19

Description : XY Plane Selection in CNC machining is done by….. a.G16 b.G17 c.G18 d.G19

Last Answer : b.G17

For CNC machining skilled part programmers are needed. a.TRUE b.FALSE c. d.

Description : For CNC machining skilled part programmers are needed. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

In CNC systems multiple microprocessors and programmable logic controllers work a.in parallel b.in series c.one after the other d.for 80% of the total machining time

Description : In CNC systems multiple microprocessors and programmable logic controllers work a.in parallel b.in series c.one after the other d.for 80% of the total machining time

Last Answer : a.in parallel

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

Last Answer : a.9.24,9.24

The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Description : The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Last Answer : d.Adaptive Control System

A officer undertakes to complete a job in 250 days. He employs 300 male for 50 days and they complete 1/2 of the work . He then reduces the number of male to 100, who work for 120 days, after which there are 20 days holidays. How many male must be employed for the remaining period to finish the work? a) 25 b) 50 c) 45 d) 35

Description : A officer undertakes to complete a job in 250 days. He employs 300 male for 50 days and they complete 1/2 of the work . He then reduces the number of male to 100, who work for 120 days, after which there ... male must be employed for the remaining period to finish the work? a) 25 b) 50 c) 45 d) 35

Last Answer : B 300 male in 50 days do = 1/2work 1 male in 1 day does = ½*1/50*1/300 work 100 male in 120 days do = ½ *1/50*1/300 *100*120 =2/5 work Total work done = ½ + 2/5 =(5+4)/10=9/10 ... is done in 50 days by 300 male 1/10 work is done in 60 days by =300*50*1*2/10*60 =50 male

In how many ways CNC machine tool systems can be classified? a.2 b.3 c.4 d.5

Description : In how many ways CNC machine tool systems can be classified? a.2 b.3 c.4 d.5

Last Answer : b.3

The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Description : The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Last Answer : c.RP machine

The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above

Description : The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above

Last Answer : a.Backlash in gearing

In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Description : In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Last Answer : c.A & B both

Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Description : Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Last Answer : b.M06

Maximum spindle speed limitation code in CNC Machine a.G90 b.G91 c.G92 d.G93

Description : Maximum spindle speed limitation code in CNC Machine a.G90 b.G91 c.G92 d.G93

Last Answer : c.G92

Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Description : Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Last Answer : c.Canned Cycle

A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Last Answer : d.Line Joining Chuck centre & tail stock centre

n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion are a.N010 GO3 X7.0 Y2.0 I5.0 J2.0 b.N010 GO2 X7.0 Y2.0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Description : n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion ... 0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Last Answer : b.N010 GO2 X7.0 Y2.0 I5.0 J2.0

In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag

Description : In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag

Last Answer : a.helicoidal

An industry employed 1200 men and 800 women and the average salary was Rs 51 per day. If a woman got Rs 10 less than a man , then what are their daily salary?(mens and women respectively) A) men Rs 25 and women Rs 35 B) men Rs 45 and women Rs 55 C) men Rs 35 and women Rs 25 D) men Rs 55 and women Rs 45

Description : An industry employed 1200 men and 800 women and the average salary was Rs 51 per day. If a woman got Rs 10 less than a man , then what are their daily salary?(mens and women respectively) A) men Rs 25 and women Rs ... Rs 45 and women Rs 55 C) men Rs 35 and women Rs 25 D) men Rs 55 and women Rs 45

Last Answer : D) Let the daily salary of man be Rs’x’ Then the daily salary of a women = Rs (x-100 Now 1200x + 800(x-10) = 51 *(1200+800) 1200x+800x -8000 = 51*2000 2000x = 102000+8000 =110000 X=55 Therefore mens daily salary Rs 55 and womens daily salary Rs 45

In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Last Answer : d.Gear cutting

Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Description : Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Last Answer : b.Subtractive manufacturing

Which of the following is not subtractive process? a.Milling b.Stereo-lithography c.Sawing d.EDM

Description : Which of the following is not subtractive process? a.Milling b.Stereo-lithography c.Sawing d.EDM

Last Answer : b.Stereo-lithography

Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Description : Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Last Answer : c.is a method for controlling by means of set of instructions

Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Description : Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Last Answer : c.[3.75 4.75 6.75]

Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Last Answer : c.Additional holes, teeth and forming

Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : d.Plane surface machining

Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : c.Rotational machining

Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : b.Main shape

Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : a.Part class

In the process of Selective Laser Sintering, raw material used is in the form of ______ a.machining wax b.foam core c.powder d.rubber

Description : In the process of Selective Laser Sintering, raw material used is in the form of ______ a.machining wax b.foam core c.powder d.rubber

Last Answer : c.powder

Machining is never used for rapid prototyping because it takes too long. a.TRUE b.FALSE c. d.

Description : Machining is never used for rapid prototyping because it takes too long. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

Which of the following is not an example of additive manufacturing? a.Fused-deposition-modeling b.Electron beam machining c.SLS d.Injection molding

Description : Which of the following is not an example of additive manufacturing? a.Fused-deposition-modeling b.Electron beam machining c.SLS d.Injection molding

Last Answer : d.Injection molding

During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Description : During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Last Answer : a.circular Interpolation – clockwise

P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each one of them finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60

Description : P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each ... finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60 

Last Answer : B Time taken by (P + Q) to finish the job = 24days. (P + Q)'s 1 day's job = 1/24 Time taken by (Q +R) to finish the job = 30days. (Q + R)'s 1 day's job = 1/30 Time taken by (R + P) to finish the ... - {(P + Q)'s 1 day's job } = (1/20 -1/24)=1/120 Hence, R alone can finish the job in 120 days.

Synthetic curve pass through defined data points and thus can be represented by a.polynomial equations b.exponential equations c.partial differential equations d.differential equations

Description : Synthetic curve pass through defined data points and thus can be represented by a.polynomial equations b.exponential equations c.partial differential equations d.differential equations

Last Answer : a.polynomial equations

A spring of mean radius 40 mm contains 8 action coils of steel (N = 80000 N/mm2 ), 4 mm in diameter. The clearance between the coils being 1 mm when unloaded, the minimum compressive load to remove the clearance, is (A) 25 N (B) 30 N (C) 35 N (D) 40 N

Description : A spring of mean radius 40 mm contains 8 action coils of steel (N = 80000 N/mm2 ), 4 mm in  diameter. The clearance between the coils being 1 mm when unloaded, the minimum compressive  load to remove the clearance, is  (A) 25 N  (B) 30 N  (C) 35 N  (D) 40 N 

Last Answer : (C) 35 N 

In CNC programming …….. is commonly used canned cycle for Stock removal cycle a.G71 b.G72 c.G73 d.G74

Description : In CNC programming …….. is commonly used canned cycle for Stock removal cycle a.G71 b.G72 c.G73 d.G74

Last Answer : d.G74

In a CNC program block, N05 GO1 G91 G33 X20 Z-40 K5……, K refer to a.Depth of cut b.Pitch c.Multiple Threading Cycle d.Feed

Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40 K5……, K refer to a.Depth of cut b.Pitch c.Multiple Threading Cycle d.Feed

Last Answer : b.Pitch

In CNC Program M98 is refer to…… a.CANCEL Subroutine b.Call Sub-Program c.Call Subroutine d.CANCEL Sub-Program

Description : In CNC Program M98 is refer to…… a.CANCEL Subroutine b.Call Sub-Program c.Call Subroutine d.CANCEL Sub-Program

Last Answer : b.Call Sub-Program

In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Description : In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Last Answer : a.Spindle ON in Clockwise rotation

In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Last Answer : c.Thread Cutting

……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Description : ……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Last Answer : d.Block

Which of the following is not the advantage of CNC machines? a.Higher flexibility b.Improved quality c.Reduced scrap rate d.Improved strength of the components

Description : Which of the following is not the advantage of CNC machines? a.Higher flexibility b.Improved quality c.Reduced scrap rate d.Improved strength of the components

Last Answer : d.Improved strength of the components

Computer will perform the data processing functions in a.NC b.CNC c.DNC d.None of the mentioned

Description : Computer will perform the data processing functions in a.NC b.CNC c.DNC d.None of the mentioned

Last Answer : b.CNC

In a CNC program block, N02 GO2 G91 X40 Z40……, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular interpolation in counter clockwise direction and absolute dimension c.circular interpolation in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Description : In a CNC program block, N02 GO2 G91 X40 Z40††, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular ... in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Last Answer : c.circular interpolation in clockwise direction and incremental dimension

Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, 49, 50, 74, 75, 99,100 B. 10, 50, 75,100, 250, 1000 C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Description : Assume postal rates for 'light letters' are: $0.25 up to 10 grams; $0.35 up to 50 grams; $0.45 up to 75 grams; $0.55 up to 100 grams. Which test inputs (in grams) would be selected using boundary value analysis? A. 0, 9,19, ... C. 0, 1,10,11, 50, 51, 75, 76,100,101 D. 25, 26, 35, 36, 45, 46, 55, 56

Last Answer : C. 0, 1,10,11, 50, 51, 75, 76,100,101