Sensors which are come in contact with some surface to measured desired physical variable areknown as____ a.Non-contact sensors b.Proximity sensors c.Contact sensors d.None of the above

1 Answer

Answer :

c.Contact sensors

Related questions

Description : Sensors which are come in contact with some surface to measured desired physical variable are known as____. (A) Non-contact sensors (B) Proximity sensors (C) Contact sensors (D) None of the above

Last Answer : C

Description : From which of the following is known as non-contact sensor a.Force sensor b.Tactile sensor c.Proximity sensor d.None of the above

Last Answer : c.Proximity sensor

Description : From which of the following is known as contact sensor. a.Tactile sensor b.Proximity sensor c.Visual sensor d.Range detector

Last Answer : a.Tactile sensor

Description : Sensors are the transducers that are used to____. a.Measure physical quantity b.Hold the objects c.Fix the objects d.None of the above

Last Answer : a.Measure physical quantity

Description : ____ sensors are used to identify objects for pick and place purpose a.Range detectors b.Infrared sensors c.Vision sensors d.Photo-metric sensors

Last Answer : c.Vision sensors

Description : ____ sensors are used to indicate presence or absence of hot objects a.Vision sensors b.Infrared sensors c.Photo-metric sensors d.Range detectors

Last Answer : b.Infrared sensors

Description : __________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : c.Formative process

Description : In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : a.Subtractive process

Description : Which of the following can not be the input of CAD solid model? a.Physical mockup b.2D surface data c.Tooling d.3D CAD data

Last Answer : c.Tooling

Description : For thermal analysis, the field variable is a.stress b.strain c.displacement d.Temperature

Last Answer : d.Temperature

Description : The number of non-coincidental points required to define the simplest surface are a.4 b.3 c.2 d.5

Last Answer : b.3

Description : Feed is measured in units of a.length/revolution b.degree/revolution c.length d.velocity

Last Answer : a.length/revolution

Description : ____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Last Answer : b.Rapid prototyping

Description : Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line

Last Answer : d.Production line

Description : On an engine throttle control system, the auxiliary control circuits are provided with devices to prevent excessive overtravel of the pilot valve by the synchronous motor. These devices are called _________________. A. overlap sensors B. limit switches C. overtravel relays D. proximity switches

Last Answer : Answer: B

Description : ___ sensors include thermocouples, thermistors, resistor temperature detectors (RTDs) and integratd circuits (ICs). A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor

Last Answer : B. Temperature Sensor 

Description : Sensors in which there is no need to contact the surface to measure the parameter or any variables are known as the ____ . (A) Tactile sensors (B) Touch sensors (C) Non-contact sensors (D) Force sensors

Last Answer : C

Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Last Answer : c.Additional holes, teeth and forming

Description : Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : d.Plane surface machining

Description : Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : c.Rotational machining

Description : Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : b.Main shape

Description : Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : a.Part class

Description : In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Last Answer : b.External shape and external shape elements

Description : Which material gives finest surface finish in RP? a.ABS b.PLA c.Nylon d.INF

Last Answer : b.PLA

Description : The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Last Answer : b.Tool length offset H

Description : he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth

Last Answer : b.depth of cut

Description : The truss element can resist only a.surface force b.axial force c.point load d.none of the above

Last Answer : b.axial force

Description : The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

Description : Which kind of model can store information about geometry a.Solid model b.Surface model c.Wireframe model d.none of the above

Last Answer : a.Solid model

Description : B-rep and C-Rep are the methods of a.solid modeling b.surface modeling c.wireframe modeling d.2D modeling

Last Answer : a.solid modeling

Description : The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

Description : From the following, which is an axisymmetric surface? a.Plane Surface b.Ruled Surface c.Surface of Revolution d.All of the above

Last Answer : c.Surface of Revolution

Description : In the following geometric modelling techniques. which cannot be used for finiteelement analysis: a.Wireframe modelling b.Surface modelling c.Solid modeling d.none of the above

Last Answer : d.none of the above

Description : In the following three-dimensional modelling techniques. Which do not requiremuch computer time and memory? a.Surface modelling b.Solid modelling c.Wireframe modelling d.All of the above

Last Answer : c.Wireframe modelling

Description : In the following geometric modelling techniques which are not three-dimensionalmodelling? a.Wireframe modelling b.Drafting c.Surface modelling d.solid modelling

Last Answer : b.Drafting

Description : QFor generating Coons patch we require a.A set of grid points on surface b.A set of control points c.Four bounding curves defining surface d.Two bounding curves and a set of grid control points

Last Answer : c.Four bounding curves defining surface

Description : Crack propagation problems come under category. a.steady-state problems b.eigenvalue problems c.transient problems d.any of the above

Last Answer : c.transient problems

Description : ____detect the presence or absence of nearby object without any physical contact. A. Smoke Sensor B. Pressure Sensor C. IR Sensor D. Proximity Sensor

Last Answer : D. Proximity Sensor 

Description : The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : b.Process layout

Description : In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational †Material †Size †Shape b.Material †Rotational or non ... non rotational †Material †Shape d.Shape †Rotational or non rotational †Material †Size

Last Answer : a.Rotational or non rotational – Material – Size – Shape

Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Last Answer : a.approximate numerical solution

Description : In homogeneous coordinates value of ‘h’ is consider as 1 & it is called….. a.Magnitude Vector b.Unit Vector c.Non-Zero Vector d.Non-Zero Scalar Factor

Last Answer : d.Non-Zero Scalar Factor

Description : The sensor that requires physical touch of an object is called A : Contact Sensor B : Inertial Sensors C : Infrared Sensor D : Laser Rangefinder

Last Answer : A : Contact Sensor

Description : The sensor that requires physical touch of an object is called A : Contact Sensor B : Inertial Sensors C : Infrared Sensor D : Laser Rangefinder

Last Answer : A : Contact Sensor

Description : From which of the following is known as non-contact sensor. (A) Force sensor (B) Tactile sensor (C) Proximity sensor (D) None of the above

Last Answer : C

Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Last Answer : b.Teach pendant is used for manual teaching.

Description : A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Last Answer : c.High Production

Description : --------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : c.Fixed

Description : Which manufacturing system is best suited for batch production a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : b.Programmable

Description : Which automation is suited for high production quantities a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : c.Fixed