I am thinking about getting into process engineering...

1 Answer

Answer :

answer:This might be useful. Also, you might want to look in to Six Sigma and Lean techniques. Of course, business and project management are closely related areas, so it wouldn’t be off course to look in to those too.

Related questions

Description : How do I go about getting an engineering internship in Tokyo?

Last Answer : The best place to start when looking for employment or an internship is your own network of family, friends, etc. Think through your connections-there might be someone therein who works in the ... often than not, this will lead you to that perfect summer engineering internship. Best of luck!

Description : My uncle said I should look into process engineering, what is the difference?

Last Answer : I found this information for you by googling. I hope it helps.

Description : What are some good examples of process engineering projects?

Last Answer : answer:One example would be taking a process that is done with one or more machine operators and automating it so it can be done with fewer/now machine operators. Another would be the ground up ... machine to streamline a process, reduce scrap, or increase output. (My husband is a process engineer)

Description : Why is engineering so hard to get into?

Last Answer : Because even top students flunk out. If you don’t have “the knack” and good academic discipline then understanding the core curriculum simply will not happen. It’s no picnic, it’s more like the revenant.

Description : How is water vapor getting into this process plumbing?

Last Answer : answer:May not be an answer, but 10 psi is less than ambient. Was the leak test for a vacuum or for positive pressure? If it is a vacuum leak it would bring in moisture.

Description : Can a Schizophrenic study Engineering?

Last Answer : You can ask the university’s disability counselor. You might get an accommodation as a special student or take fewer classes, and go part time. Congratulations on improving your situation.

Description : Which College is best for Marine Engineering?

Last Answer : The Merchant Marine Academy

Description : What is computer engineering like when compared to working at McDonalds?

Last Answer : answer:McDonalds you just take shit from your boss, and from customers while working a shit wage. My buddy describes his engineering job like hanging out in the college library working out a problem. ... those who feel their skills makes them a better human being/deserving of a higher wage.

Description : I need a career change. I really enjoy math. Should I consider engineering?

Last Answer : answer:While math is a big part of engineering, design and insight are a big part of it. Do you have interest in designing things? And what kind of engineering are you thinking of? Civil, ... to keep asking questions and not giving you answers, but these are things you need to think through.

Description : What is biomedical engineering?

Last Answer : answer:Plenty of jobs, yes. Take a look at this and all the subfields: http://en.wikipedia.org/wiki/Bioengineering Bioprocess Engineering: Bioprocess Design, Biocatalysis, Bioseparation, Bioinformatics ... favorite is this http://en.wikipedia.org/wiki/Bioinformatics Google pours millions into this.

Description : How different is cost engineering in North America?

Last Answer : answer:Cost engineering? I'm not sure about this one . but accounting practices are different. Asset management and liability listings are different because there are accepted practices in the US ... would be probably language. Terms and general language skills would probably be the biggest hurtle.

Description : Where can I get FREE training in audio engineering?

Last Answer : TINSTAAFL. :)

Description : Software used for reverse engineering after 3D scanning is a. Maya b. 3D Max c. CAD d. all of the above

Last Answer : c. CAD

Description : What Is Difference Between Engineering Stress And True Stress?

Last Answer : Answer : Think about pulling a bar in tension. Load divided by cross-sectional area is force, or stress. But what cross section are you considering? Before starting pull, the bar had a ... to the initial diameter of the circle. The relationships between engineering values and true values are:

Description : Describe six sigma for software engineering.

Last Answer : Six Sigma is the most widely used strategy for statistical quality assurance in industry today. Originally popularized by Motorola in the 1980s, the Six Sigma strategy -is a rigorous and disciplined ... variation is sometimes called the DMADV (define, measure, analyze, design, and verify) method.

Description : GATE 2020 syllabus electrical engineering

Last Answer : EE: Electrical Engineering Section 1: Engineering Mathematics Linear Algebra: Matrix Algebra, Systems of linear equations, Eigenvalues, Eigenvectors. Calculus: Mean value theorems, Theorems of ... to dc converters, Single phase and three phase inverters, Sinusoidal pulse width modulation.

Description : Write short notes on fire extinguishing methods adopted in electrical engineering. 

Last Answer : Stand 6 to 8 feet away from the fire and follow the four-step PASS procedure. If the fire does not begin to go out immediately, leave the area at once. Always be sure ... fire causing the particles to expand chemically inhibiting combustion and expelling the oxygen thereby smothering the flames. 

Description : Electrical engineering

Last Answer : https://youtu.be/ZKnK7Na2Frw

Description : Electrical Engineering Android APP

Last Answer : Electrical Engineering Useful Android Apps 1. Electrical Engineering https://play.google.com/store/apps/details?id=electrical.electronics.engineering 2. Electrical Engineering Symbols https:/ ... .google.com/store/apps/details?id=electrical.engineering.qanda SHARE THIS USEFUL APPS

Description : 1.Determine the permeability of magnetic material by plotting its BH curve 2. Measure voltage, current and power in 1-phase circuit with resistive load. 3. Measure voltage, current and ... .Make Star and Delta connection in induction motor starters and measure the line and phase values.

Last Answer : Practical no. 6 Aim: Make Star and Delta connection in induction motor starters and measure the line and phase values. Apparatus required:  voltmeter, ammeter, induction motor Circuit diagram ... Result: Hence we have measured the line and phase value of star and delta connection.

Description : What is better computer engineering or software engineering?

Last Answer : Computer Engineering have many parts in which one is software engineering, if your interest in software development then choose software engineering

Description : Extraction of __________ employs an electrolytic process. (A) Aluminium (B) Silver (C) Copper (D) All (A), (B) and (C)

Last Answer : (A) Aluminium

Description : What Reinforcements Are Used In The Process Of Prestressing?

Last Answer : Answer : The major types of reinforcements used in prestressing are:  Spalling Reinforcement: The spalling stresses leads to stress behind the loaded area of the anchor blocks. This results in the ... of load. In order to reduce such stresses reinforcements in the form of bursting is required.

Description : What Do You Understand By “preset” During The Installation Process Of Bridge Bearings?

Last Answer : Answer : During the installation of bridge bearings the size of the upper plates is reduced to save the material costs. This process is known as preset. Generally the upper bearing plate comprises of ... to the length of the length of the bearing + irreversible movement + 2 x reversible movement

Description : What Are The Steps Involved In The Concreting Process, Explain?

Last Answer : Answer : 1. Batching: The process of measurement of the different materials for the making of concrete is known as batching. batching is usually done in two ways: volume batching and weight batching ... performed. Compaction is generally performed in two ways: by hand or by the use of vibrators.

Description : Draw P-V and T-S diagram for isochoric process.

Last Answer : Isochoric Process: 

Description : Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.

Last Answer : Isobaric process Isothermal process Isochoric process Adiabatic process:

Description : Could someone give a simple high level explanation of what is meant by AM and FM?

Last Answer : Well, have a look at this picture

Description : Direct conversion of chemical energy into electrical energy is done in a (A) Magnetohydrodynamic (MHD) generator (B) Fuel cell (C) Fast breeder reactor (D) None of these

Last Answer : (B) Fuel cell

Description : Please ripley me due to emergency

Last Answer : To calculate the flux density in the ring, you need to use the following formula: B = (μ * I * N) / (2 * π * r) where: B is the flux density in the ring (in teslas) μ is the relative permeability ... 2 * π * 0.127 m) = 0.53 T So the flux density in the ring would be approximately 0.53 teslas.

Description : Is not asked

Last Answer : In manual feed turning, the operator manually controls the feed rate of the cutting tool by turning a handwheel or other manual feed mechanism. This allows the operator to adjust the feed rate ... hand, is generally faster and more consistent, but it requires more complex equipment and programming.

Description : Mechanical engineers: how should one think about using an electric motor actuator vs a hydraulic actuator powered by an electric pump?

Last Answer : Too much wear on gears (and they would have to be huge), much more power advantage with hydraulics. Less parts. And more cost effective. And take up less space.

Description : How long is the longest rope ever manufactured?

Description : Is it clear what a flying car is from the images in the following page?

Last Answer : Yeah. Why? And, I don’t know. If you’ve seen the ‘Blade Runner’, and some other science fictions series and films, it just looks neat. But I doubt we’ll have much of those things until the relatively distant future… if then.

Description : Does anyone have advice about building a new pole barn on my property?

Last Answer : So you intend to keep the current concrete floor?

Description : Do the new digital thermometers stay in your mouth when you use them?

Last Answer : They pop out of my mouth too. Yes, they need redesigned. I went back to the old fashion thermometers with mercury.

Description : Where do you find buildings that are both earthquake proof as well as flood proof?

Last Answer : California.

Description : Fluther engineers, can you reproduce the technology in an food assembly line?

Last Answer : answer:If the world collapses there will be bigger problems than restoring food processing and packaging on assembly lines. One of the bigger problems will be finding people willing to raise food crops ... not going to be one of the first industries to re-emerge from a collapse of civilization.

Description : What types of non-physics/math based engineers are there?

Last Answer : Choo-choo train. You get to choose your scale rather than your degree.

Description : How can I introduce teaching code to my soon to be 2 year old son?

Last Answer : Building with blocks, making mud pies, playing with Thomas the Tank Engine and making the tracks fit. Don’t worry about specific skill preparation; all creative play is good. Your son might decide he wants to be a ballerina!

Description : What is the max square feet or cubic feet for residential air conditioners?

Last Answer : JLeslie This Link seems to keep is simple and I like that it is tabled by temp zones.

Description : What calculator do engineers use?

Last Answer : pen and paper, yeaaaaaah

Description : Why do many people hate on excellence and claim that, without exception, the elevated cost is created artificially for vanity alone?

Last Answer : answer:Do they? Is this a thing? I could take a stab at this, but it would be from a different angle. Some people might see a $1.5M price tag and chuckle - not because they don't think ... data. Instead, it's shit animated graphics and designed for people who apparently do not care about the data.

Description : Calling all engineers! Would it be possible to make a continuous, running loop out of my stream?

Last Answer : Call a pond or water feature pump company. Yes it is possible and could be done with simple switches and floats in the pond. The overflow would be a high level drain (top of water) and pump would shut off on high water. Some ponds at town and large public gardens are set-up that way.

Description : How do you integrate (x-x^2)e^x?

Last Answer : answer:Yep, you'll need integration by parts! Two rounds of it. Lucky you :P Start by choosing one term to be u and one term to be dv. You'll have to take the derivative of u and integrate dv. The important thing is to always choose ... xe^x - x^2e^x - e^x + 2xe^x - 2e^x -x^2e^x + 3xe^x -3e^x Done!

Description : Are all GMO plants bad?

Last Answer : The problem is that No long term studies have been done on how Genetically Altered food will affect us. Our Metabolism slows down to process unknown substances. This promotes a Metabolic Disturbance which can ... contains unnatural substances. You can find more on droz.com and Dr Mark Hyman's site.

Description : How to measure volume flow rate?

Last Answer : answer:If it Classified as Confined Space you should a have it marked as such. You need to review OSHA requirements. You cannot prove natural ventilation when it is a confined space . Positive ... company that had three near misses in confined spaces. Dead people don't go home at night!

Description : Can you help me engineer this leak detection system for organic solvents?

Last Answer : answer:I'm sorry that I may not be qualified to answer this question, but these are my ideas. If argon is what will be leaking, you could have some sort of argon detector, and some sort of ... when there are no leaks. Any drop in pressure would signal a leak. Look up pressure decay leak detection.

Description : My husband is an engineer and looking to switch careers. Does anyone have any suggestions?

Last Answer : Actuary requires a certificate after completing several exams. Explanation

Description : Building with bamboo?

Last Answer : First of, i never worked with bamboo. But i think i would screws over nails, because i fear that bamboo shoots might split quite easily when hammering nails into it. When using screws you can drill holes before you put them in to avoid splitting.