Description : The capacity of automatic flushing cistern connected with three urinal shall be (a) 05 litrs. (b) 10 litrs. (c) 12.5 litrs.* (d) None of these
Last Answer : (c) 12.5 litrs.*
Description : The capacity of automatic flushing cistern connected with two urinal shall be (a) 10 litrs.* (b) 12.5 litrs. (c) 05 litrs. (d) None of these
Last Answer : (a) 10 litrs.*
Description : The capacity of automatic flushing cistern connected with one urinal shall be (a) 05 litrs. (b) 10 litrs. (c) 12.5 litrs. (d) None of these
Last Answer : (a) 05 litrs.
Description : The urinal basin shall be connected with (a) High level floating cistern* (b) Low level floating cistern (c) Automatic floating cistern (d) Any one of the above
Last Answer : (a) High level floating cistern*
Description : Maximum height of low level cistern from top of W.C. pan should be (a) 65 cm. (b) 30 cm. (c) 8 (d) 120 cm. (e) 80 cm.
Last Answer : b) 30 cm. (c) 8
Description : Fish plated joint shall be avoided in check raisl and on the running rails within--------- from the end of level crossing a) 3 meters* b) 5 meters c) 10 meters d) 12 meters
Last Answer : a) 3 meters*
Description : In Girder and Slab Bridges Danger level should be marked below bottom of girders/slabs for water way is > 6.10 < 12.2 m a) 300 mm b) 600 mm c) 450 mm* d) 500 mm
Last Answer : c) 450 mm*
Description : Normal consumption of fuep in ltrs/hr. by a 35hp tractor is (A) 2.5 (B)3.0 (C)3.5 (D)4
Last Answer : (B)3.0
Description : ormal size of brick used in India is a) 22 x 11.2 x 7 cm* b) 25 x 16 x 8 cm c) 19 x 12 x 9 cm d) 20 x 10 x 5 cm
Last Answer : a) 22 x 11.2 x 7 cm*
Description : Where Enquiries are ordered by DRM the enquiry report should be submitted to DRM within (a) 5 days (b) 7 days* (c) 10 days (d) 12 days
Last Answer : (b) 7 days
Description : A pump can fill a cistern in 12 hrs. After half the cistern is filled, 3 more similar pumps are opened. What is the total time taken to fill the cistern completely? A) 8 hrs B) 4 hrs C) 2hrs D) 7.5 hrs
Last Answer : D Time taken by 1 pump to fill tha half tank = 6 hrs Part filled by the 4 pumps in 1 hr = 4 * 1/12 =1/12 =>1/3 Remaining part = (1 – 1/2)= 1/2 Therefore 1/3 :1/2 :: 1:x X=1.5 hrs So total time takem = 6hrs + 1.5 hrs = 7.5 hrs.
Description : n Girder and Slab Bridges Danger level should be marked below bottom of girders/slabs for water way is > 12.20 < 30.5 m a) 300 mm b) 600 mm* c) 500 mm d) 450 mm
Last Answer : b) 600 mm*
Description : The spacing of tube wells should generally be more than ----------from the circle of influence a)10 metre b)50 metre c)100 metre* d) 500 metre
Last Answer : c)100 metre*
Description : On an unmanned level crossing stop board should be provided at a distance of --------- from the centre of nearest track a) 5 meters * b) 6 meters c) 3 meters d) 7.5 meters
Last Answer : a) 5 meters
Description : The maximum time lag between the primer coat and the Ist finishing coat shall not exceed a) 3 days b) 7 days* c) 4 days d) 12 days
Last Answer : b) 7 days*
Description : To provide inverted filter to improve the bearing capacity of soil the liquid limit of blanketing material should not be greater than a) 5 b) 20 c) 27 d) 35
Last Answer : d) 35
Description : In case of septic tank, the length (L) to width (B) ratio is generally (a ) L = 3 B* (b) L = 5 B (c) L = 1.5 B (d) L = B
Last Answer : (a ) L = 3 B*
Description : A bridge is generally specified as “Br. No. 180 (5x9.10m G) at km 345/5-6”. a) Effective Span b) Width of bridge c) Clear Span* d) Overall length of bridge
Last Answer : c) Clear Span*
Description : Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)
Last Answer : a) Rate of wear
Description : The maximum pressure which the soil can carry safely without the risk of shear failure is called a) Safe bearing capacity b) Ultimate bearing capacity* c) Allowable bearing capacity d) Shear bearing capacity
Last Answer : b) Ultimate bearing capacity*
Description : The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil
Last Answer : a) Shearing strength of soil and its angle of repose*
Description : To provide inverted filter to improve the hearing capacity of soil the plasticity index of blanketing material should not be greater than a) 15* b) 20 c) 27 d) 35
Last Answer : a) 15*
Description : The capacity of highest storage tank with efficient standby pump should be higher of the following figures a)1/4 the maximum water consumption in 24 hours b)1/3 the normal water consumption in 24 hours c)1/4 the normal water consumption in 24 hours. d) a or b* e) b or c f) a of c
Last Answer : d) a or b*
Description : Density of each compacted layer should be ascertained by taking soil samples on either side of Central Line at a) 5 meter interval b) 10 meter interval* c) 12 meter interval d) 15 meter internal
Last Answer : b) 10 meter interval*
Description : Before discharging the foul sewage into rivers, it is generally treated by (a) screening (b) sedimentation (c) Oxidation (d) sludge digestion and disinfection (e) all the above*
Last Answer : e) all the above*
Description : An artificial stone made from pieces of white marble, white cement and other coloring agents, generally used for floor and facing walls is known as a) Topaz b) Marble c) Terrazzo* d) Gneiss
Last Answer : c) Terrazzo*
Description : Stone generally preferred for railway ballast is a) Sandstone b) Dolomite c) Marble d) Basalt or trap granite*
Last Answer : d) Basalt or trap granite*
Description : Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water
Last Answer : d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water
Description : For railway bridges with spans in excess of 30.5m, generally provided with a) deck type girders b) open web through girders* c) semi through girders d) shallow type girders
Last Answer : b) open web through girders*
Description : Chandigarh is a city which has roads generally parallel or perpendicular to each other. The ideal water supply system in such a city should be a. Dead and system b. Grid Iron system* c. Ring system d. Any of them
Last Answer : b. Grid Iron system*
Description : The gradient of a platform is generally (a) 1 in 1000 (b) 1 in 750 (c) 1 in 500* (d) 1 in 250
Last Answer : (c) 1 in 500*
Description : The Height Gauge for a level crossing should be located at least --------- from the gate post a) 3 meters b) 5 meters c) 8 meters* d) 10 meters
Last Answer : c) 8 meters*
Description : Stop boards on either side of approaches of all unmanned level crossings shall be provided at -------------from the centre line of nearest track. a) 3meters b) 5 meters* c) 6 meters d) 10 meters
Last Answer : b) 5 meters*
Description : The danger level should be marked with a bright red band …… wide centrally over a white band …… wide for a length of……… a) 5 cm, 10 cm, 60 cms* b) 10 cm, 20 cm, 60 cm c) 15 cm, 30 mm, 60 cm d) None of the above
Last Answer : a) 5 cm, 10 cm, 60 cms*
Description : Formation width for bank for B.G. double line section is (a) 10.82 m (b) 11.0 m (c) 11.58 m (d) 12.155 m*
Last Answer : (d) 12.155 m*
Description : What is the app. Weight of 52 kg portion? (i) 10 kg (ii) 11 kg* (iii) 12 kg (iv) None of the above
Last Answer : (ii) 11 kg*
Description : From distribution main of 50 mm size, number of service pipes of 15 mm size can be taken off are ------ a) 6 b)10 c) 12 e):20*
Last Answer : e):20*
Description : From the distribution main of 40 mm size, number of service pipe of 20 mm size can be taken off are ------- a)3 B) 6* c) 10 d) 12
Last Answer : B) 6*
Description : From distribution main of 40 mm size , number of service pipe of 15 mm size can be taken off are--------- a) 3 b) 6 c) 10 d) 12*
Last Answer : d) 12*
Description : Maximum curvature permitted on B.G. is (a) 8 degree (b) 10 degree* (c) 12 degree (d) 16 degree
Last Answer : (b) 10 degree*
Description : How many zones are in Indian railway a. 8 b. 10 c. 16* d. 12
Last Answer : c. 16*
Description : Speed breaker has to be provided on road approaches of level crossing at maximum feasible distance within Railway boundary but not exceeding a) 10 meters b) 15 meters c) 20 meters* d) 200 meters
Last Answer : c) 20 meters*
Description : Height of Low level platform for passengers for BG is --- high (a) 0.455 m* (b) 0.560 m (c) 0.650 m (d) 0.760 m
Last Answer : (a) 0.455 m*
Description : Height of high level platform for passengers for BG is --- high (a) 0.455 m (b) 0.560 m (c) 0.650 m (d) 0.760 m*
Last Answer : (d) 0.760 m*
Description : For ‘B’ category stations as per minimum essential facility it is necessary to provide (a) High level platform (b) Medium level platform* (c) Rail level platform (d) All the above
Last Answer : (b) Medium level platform*
Description : For ‘A’ category stations it is necessary to provide (a) High level platform* (b) Medium level platform (c) Rail level platform (d) All the above
Last Answer : (a) High level platform*
Description : For high level flush the nominal dia of flush pipe shall be (a) 32 mm* (b) 40 mm (c) 25 mm (d) None of these
Last Answer : a) 32 mm*
Description : Maximum height above rail level of high passenger Platform a. 860 mm b. 900 mm c. 840 mm&* d. 875 mm
Last Answer : c. 840 mm&*
Description : 3 faucet P,Q & R can fill a cistern in 12 hrs. After working together for 4hrs, R is closed P and Q can fill the remaining part in 14 hrs. The number of hrs taken by R alone to fill the cistern is. A) 18 hrs B) 20 hrs C) 28hrs D) 30hrs
Last Answer : C Part filled in 4 hrs = 4/12 = 1/3 Remaining part = 2/3 (P+Q)’s 14 hrs work = 2/3 (P+Q)’s 1 hr work = 2/ 3 *14 = 1/21 R’s 1 hr work = (P+Q+R)’s 1 hr work – (P+Q)’s 1 hr work = 1/12 – 1/21 = 7-4/84 = 3/84 = 1/28 R alone can fill the tank in 28 hrs.
Description : A tank can be filled by a tap in 8 hrs while it can be emptied by another tap in 18 hrs. if both the taps are opened simultaneously, then after how much time will the cistern get filled? A) 14hrs 24mins B) 14 hrs 12 mins C) 14hrs 56 mins D) 14hrs 30mins
Last Answer : A Net part filled in 1hr = (1/8 – 1/18) = 9 – 4/72 = 5/72 Therefore the tank will be filled in 72/5 hrs i.e., 14 hrs 24mins