Description : What is the frequency limit of a copper wire? ∙ A. approximately 0.5 MHz ∙ B. approximately 1.0 MHz ∙ C. approximately 40 GHz ∙ D. none of the above
Last Answer : B. approximately 1.0 MHz
Description : Approximately what is the frequency limit of the optical fiber? ∙ A. 20 MHz ∙ B. 1 MHz ∙ C. 100 MHz ∙ D. 40 GHz
Last Answer : ∙ D. 40 GHz
Description : When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity
Last Answer : d. Detector sensitivity
Description : A radio frequency in the ultra high frequency band of the radio spectrum band. A. 235.50 MHz B. 450.50 MHz C. 150.50 GHz D. 0.31250 GHz
Last Answer : D. 0.31250 GHz
Description : Industrial noise frequency is between _________. A. 200 to 3000 Mhz B. 15 to 160 Mhz C. 0 to 10 Khz D. 20 Ghz
Last Answer : B. 15 to 160 Mhz
Description : A voice-grade circuit using the PTN has an ideal passband of A. 0 to 4 Hz B. 0 to 4 kHz C. 0 to 4 GHz D. 0 to 4 MHz
Last Answer : B. 0 to 4 kHz
Description : Indicatewhich ofthe followingfrequencies cannotbe used forreliablebeyond-the-horizon terrestrial communicationswithoutrepeaters: a. 20 kHz b. 15 MHz c. 900 MHz d. 12GHz
Last Answer : d. 12GHz
Description : What noise is observable at frequencies in the range from about 8 MHz to somewhat 1.5 GHz? A. Industrial noise B. Atmospheric noise C. Space noise D. Shot noise
Last Answer : C. Space noise
Description : What noise type is observable between 8 MHz to somewhat above 1.43 GHz or up to 1.5 GHz? A. Solar noise B. Space noise C. Galactic noise D. Cosmic noise
Last Answer : B. Space noise
Description : For a 300-m optical fiber cable with a bandwidth distance product of 600 MHz-km, determine the bandwidth. ∙ A. 5 GHz ∙ B. 1 GHz ∙ C. 2 GHz
Last Answer : C. 2 GHz
Description : Most satellites operate in which frequency band? A. 30 to 300 MHz B. 300 MHz to 3 GHz C. 3 GHz to 30 GHz D. Above 300 GHz
Last Answer : C. 3 GHz to 30 GHz
Description : The bandwidth of C-band satellite frequency band in U.S. A. 500 GHz B. 1000 GHz C. 1000 MHz D. 500 MHz
Last Answer : D. 500 MHz
Description : What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz
Last Answer : C. 2225 MHz
Description : Tropospheric scatter is a method of sky wave propagation for which of the following frequency bands? A. 300 kHz to 3 MHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 300 MHz to 3 GHz
Last Answer : D. 300 MHz to 3 GHz
Description : Which of the following frequency bands is best suited for sky wave propagation? A. 30 to 300 kHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 3 GHz to 30 GHz
Last Answer : B. 3 MHz to 30 MHz
Description : The extremely high frequency (EHF) band is in the radio spectrum range of _______. A. 30 to 300 kHz B. 30 to 300 GHz C. 3 to 30 MHz D. 3 to 30 GHz
Last Answer : B. 30 to 300 GHz
Description : Coaxial lines are used on those systems operating _______. A. Below 2 GHz B. At 300 MHz C. Above 10KHz D. Above 10GHz
Last Answer : A. Below 2 GHz
Description : Atmospheric noise is less at severe frequencies above A. Audio level B. 30 MHz C. 10 GHz D. 1 GHz
Last Answer : B. 30 MHz
Description : Fiber optic cable operates near _______ frequencies. A. 800 THz B. 20 MHz C. 200 MHz D. 2 GHz
Last Answer : A. 800 THz
Description : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly
Last Answer : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly 4 Ghz
Description : The product of uncertainties of two physical observables must be approximately equal to a)Coulomb’s constant K b) Rydberg’s constant R c)Planck’s constant d)All of the above
Last Answer : c)Planck’s constant
Description : Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW
Last Answer : A. 0.871 μW
Description : An eight stage ripple counter uses a flip-flop with propagation delay of 75 nanoseconds. The pulse width of the strobe is 50ns. The frequency of the input signal which can be used for proper operation of the counter is approximately (A) 1 MHz. (B) 500 MHz. (C) 2 MHz. (D) 4 MHz.
Last Answer : Maximum time taken for all flip-flops to stabilize is 75ns x 8 + 50 = 650ns. Frequency of operation must be less than 1/650ns = 1.5 MHz.
Description : CAT Scanners can detect density differences of the order of a) 50 percent b) 10 percent c) 1 percent d) 40 percent
Last Answer : c) 1 percent
Description : Current gain of a transistor which has collector current of 10 mA and a base current of 40 micro Ampere is: (a) 25 (b) 250 (c) 2500 (d) 25000
Last Answer : b) 250
Description : A transformer steps down 220V to 40 volts. If the secondary turns are 40 then primary turns will be: a. 20 b. 40 c. 120 d. 220
Last Answer : d. 220V
Description : Three bulbs are rating 40W 60W and 100W designed to work on 220V mains. Which bulb will burn most brightly if they are connected in series across 220 V mains? a. 40 W bulb b. 60 W blub c. 100 W blub d. all will burn equally brightly
Last Answer : a. 40 W bulb
Description : Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W
Last Answer : b. 90W
Description : What is the frequency limit of an optical fiber? ∙ a. 20 GHz ∙ b. 30 GHz ∙ c. 40 GHz ∙ d. 50 GHz
Last Answer : ∙ c. 40 GHz
Description : What is actual length in feet of a one-half wavelength of a coax with a velocity factor of 0.59 at 26 MHz? A. 11.16 B. 40.29 C. 42.46 D. 46.28
Last Answer : A. 11.16
Description : What is the common up-converter and down-converter IF? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz
Last Answer : C. 70 MHz
Description : What is the typical bandwidth of a satellite band? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz
Description : What is the most commonly used intermediate frequency of radar receivers? A. 40 MHz B. 60 MHz C. 70 MHz D. 30 MHz
Last Answer : D. 30 MHz
Description : What is the typical center frequency spacing between adjacent channels (transponders) in satellites? A. 36 MHz B. 40 MHz C. 500 MHz D. 4 MHz
Last Answer : B. 40 MHz
Description : Which ofthe followingcableswill have the highestlaunch power capability? a. 50/125/0.2 b. 85/125/0.275 c. 62.5/125/0.275 d. 100/140/0.3
Last Answer : d. 100/140/0.3
Description : .Aslightis coupledin amultipointreflective device,thepowerisreduced by a. 1.5 dB b. 0.1 dB c. 0.5 dB d. 0.001 dB
Last Answer : c. 0.5 dB
Description : The gap between the two halves of axle pulley should be a. 0.5 – 1.0 mm c. 3.0 – 4.0 mm b. 2.0 – 3.0 mm d. 5.0 – 5.5 mm
Last Answer : c. 3.0 – 4.0 mm
Description : The value of first quantized Bohr orbit radius of hydrogen atom is a) 0.0053 nm b) 5.3 nm c) 0.053 nm d) 0.053 cm
Last Answer : c) 0.053 nm
Description : The potential barrier for germanium is _______ (a) 0.6 V (b) 0.2 V (c) 0.3 V (d) 0.5 V
Last Answer : (c) 0.3 V
Description : A current of 5.8 A flows through a 0.25 m long straight conductor which is kept perpendicular in a region of uniform magnetic field of 3.7 T . The force on conductor is a) 5.4 N b) 2.4 N c) 3.4 N d) 6.4 N
Last Answer : a) 5.4 N
Description : A 0-10 mA PMMC ammeter reads 5mA in a circuit; its bottom control spring snaps out suddenly the meter will now read. a) 5mA b) 10mA c) 2.5mA d) 0
Last Answer : Ans: 0
Description : The transfer function of a system is 10/(1+s) when operating as a unity feedback system, the steady state error to a step input will be a) 0 b) 1/11 c) 10 d) Infinity
Last Answer : Ans: 1/11
Description : According to Bohr’s theory, the fourth stationary orbit of electrons in the hydrogen atom is a) 4 (0.053 nm) b) 9 (0.053 nm) c) 16 (0.053 nm) d) 25(0.053 nm)
Last Answer : c) 16 (0.053 nm)
Description : The phenomena of pair production occurs only when the energy of incident photon is least equal a) 10.2 MeV b) 1.02 MeV c) 1.02 eV d) 0.102 MeV
Last Answer : b) 1.02 MeV
Description : 0.001 Kg mass will be equivalent to a) 2.50 Giga watt hour b) 25.00 giga watt hour c) 0.26 giga watt hour d) None of the above
Last Answer : b) 25.00 giga watt hour
Description : The negative sign in expression ɛ= -vBL shows that the angle between the direction of L and (v x B) is: a. 90 b. 180 c. 45 d. 0
Last Answer : a. 90
Description : An α particle moves perpendicular to a constant magnetic field of strength 1.2 T in a circular path of radius 0.7 m. The speed of α particle in ms-1 is ______________ a) 2.7 × 107 b) 2.6 × 107 c) 3.2 × 107 d) 2.0 × 107
Last Answer : a) 2.7 × 107
Description : An electron moves with a velocity of 2 × 106 ms-1 in the direction of a uniform magnetic field of 0.8 Tesla. The force on electron is a) 8 N b) 2 N c) 4 N d) Zero
Last Answer : d) Zero
Description : A galvanometer of 65 Ω resistance gives full scale deflection with 4 mA current. In order to convert it into ammeter, the range of 10 A is connected with it, the shunt resistance should be a) 0.1 Ω b) 0.2 Ω c) 0.06 Ω d) 0.03 Ω
Last Answer : d) 0.03 Ω
Description : When the potential difference of 4 volt is applied across resistance, 10J energy is converted. Find the charge flows. a. 0.20 C b. 2.5C c. 5C d. 10C
Last Answer : b. 2.5C