The time interval that a waveform is high (or low) is the ___ of the signal.

The time interval that a waveform is high (or low) is the ___ of the signal.
by

1 Answer

Answer :

pulse width
by

Related questions

The ___ provides the visual display showing the form of the signal applied as a waveform on the front screen of a cathode ray oscilloscope

Description : The ___ provides the visual display showing the form of the signal applied as a waveform on the front screen of a cathode ray oscilloscope

Last Answer : CRT

The time interval between pulses is called ___

Description : The time interval between pulses is called ___

Last Answer : pulse delay

In VTVMS, ___ refers to the smallest signal that can be reliably measured

Description : In VTVMS, ___ refers to the smallest signal that can be reliably measured

Last Answer : sensitivity

Type of waveform generated by the sweep generator of the CRT

Description : Type of waveform generated by the sweep generator of the CRT

Last Answer : sawtooth

What provides a visual representation of any waveform applied to the input terminals?

Description : What provides a visual representation of any waveform applied to the input terminals?

Last Answer : cathode ray oscilloscope (CRO)

___ ammeter is used to measure high-frequency currents.

Description : ___ ammeter is used to measure high-frequency currents.

Last Answer : thermocouple

High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

For a dynamometer to be able to measure high current, a ___ should be used.

Description : For a dynamometer to be able to measure high current, a ___ should be used.

Last Answer : current transformer

The interval of a pulse from start to end is the __ of the pulse

Description : The interval of a pulse from start to end is the __ of the pulse

Last Answer : period

Which of the following ECG characteristics is usually seen when a patient’s serum potassium level is low? a) U wave The U wave is an ECG waveform characteristic that may reflect Purkinje fiber repolarization. It is usually seen when a patient’s serum potassium level is low. b) T wave The T wave is an ECG characteristic reflecting repolarization of the ventricles. It may become tall or “peaked” if a patient’s serum potassium level is high. c) P wave The P wave is an ECG characteristic reflecting conduction of an electrical impulse through the atria. d) QT interval The QT interval is an ECG characteristic reflecting the time from ventricular depolarization to repolarization.

Description : Which of the following ECG characteristics is usually seen when a patient's serum potassium level is low? a) U wave The U wave is an ECG waveform characteristic that may ... interval The QT interval is an ECG characteristic reflecting the time from ventricular depolarization to repolarization.

Last Answer : a) U wave The U wave is an ECG waveform characteristic that may reflect Purkinje fiber repolarization. It is usually seen when a patient’s serum potassium level is low.

For time measurements, ___ scale of the scope is used.

Description : For time measurements, ___ scale of the scope is used.

Last Answer : horizontal

___ has a series RC combination in one arm and a parallel RC combination in the adjoining arm and used as a notch filter in harmonic distortion analyzer.

Description : ___ has a series RC combination in one arm and a parallel RC combination in the adjoining arm and used as a notch filter in harmonic distortion analyzer.

Last Answer : wein bridge

When the capacitors of a Wein Bridge are replaced by inductors, the bridge becomes ___

Description : When the capacitors of a Wein Bridge are replaced by inductors, the bridge becomes ___

Last Answer : Wein Inductance Bridge

Induction type instruments are mostly used as ___

Description : Induction type instruments are mostly used as ___

Last Answer : watt-hour meter

For amplitude measurements, ___ scale is calibrated in either volts per centimeter (V/cm), or millivolts per centimeter (mV/cm)

Description : For amplitude measurements, ___ scale is calibrated in either volts per centimeter (V/cm), or millivolts per centimeter (mV/cm)

Last Answer : vertical

When the meter is unsufficiently damped, it is considered as ___

Description : When the meter is unsufficiently damped, it is considered as ___

Last Answer : underdamped

A wheatstone bridge is balanced if ___

Description : A wheatstone bridge is balanced if ___

Last Answer : the ratio of resistors on one side of the bridge equals the ratio of resistors on the other side

In a moving coil ammeter, a ___ is connected in series with the coil to compensate for temperature variations

Description : In a moving coil ammeter, a ___ is connected in series with the coil to compensate for temperature variations

Last Answer : swamping resistors

A measure of consistency or repeatability of measurements is called. ___

Description : A measure of consistency or repeatability of measurements is called. ___

Last Answer : precision

___ is used for measuring medium Q coils

Description : ___ is used for measuring medium Q coils

Last Answer : Maxwell Bridge

Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Description : Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Last Answer : low resistance resistor

Error in voltmeter is due to ___

Description : Error in voltmeter is due to ___

Last Answer : loading

In an oscilloscope, ___ adjusts the brightness of the spot by chaning the current on the control grid.

Description : In an oscilloscope, ___ adjusts the brightness of the spot by chaning the current on the control grid.

Last Answer : intensity control

___ meter is the most sensitive

Description : ___ meter is the most sensitive

Last Answer : 1uA

Most AC voltmeters have an rms scale which is valid only if the input signal being measured is a __ signal.

Description : Most AC voltmeters have an rms scale which is valid only if the input signal being measured is a __ signal.

Last Answer : sinusoidal

The period of a repetitive signal is

Description : The period of a repetitive signal is

Last Answer : 1 cycle of the waveform

Draw waveform for standing waves on an open and shorted line. Prove that impedance is inverted at every quarter wavelength interval.

Description : Draw waveform for standing waves on an open and shorted line. Prove that impedance is inverted at every quarter wavelength interval.

Last Answer : Waveform- Explanation When the transmission line is short circuited voltage is zero and current is maximum.The variation is according to the wavelength. When the ... The pattern repeats for every half wavelength. Thus impedance is inverted at every quarter wavelength interval.

What type of sensing element would you use to measure very low temperature ?

Description : What type of sensing element would you use to measure very low temperature ?

Last Answer : The sensing element used for measuring very low temperature is R. T. D. ( Resistance Temperature Detector )

It consists of a diode and an opamp and has the ability to clip low level signals

Description : It consists of a diode and an opamp and has the ability to clip low level signals

Last Answer : precision diode

What ammeter is mostly used in measuring high frequency currents?

Description : What ammeter is mostly used in measuring high frequency currents?

Last Answer : thermocouple

Voltage measurement in a high impedance circuit requires a voltmeter with

Description : Voltage measurement in a high impedance circuit requires a voltmeter with

Last Answer : high input impedance

What bridge is used to measure high-Q inductors? (Q>10)

Description : What bridge is used to measure high-Q inductors? (Q>10)

Last Answer : hay bridge

A common technique for measuring power at high frequency is to ______

Description : A common technique for measuring power at high frequency is to ______

Last Answer : employ a sensing element that converts the RF power to a measureable dc or low-frequency signal

Which of the voltmeter is used for measuring high direct voltage (say 10kV)?

Description : Which of the voltmeter is used for measuring high direct voltage (say 10kV)?

Last Answer : electrostatic

Measurement of high dc-voltages is usually done by using

Description : Measurement of high dc-voltages is usually done by using

Last Answer : electrostatic

Measurement of high dc-voltages is usually done by using

Description : Measurement of high dc-voltages is usually done by using

Last Answer : electrostatic

The waveform of a certain signal can be studied by – (1) Spectrometer (2) Cathode ray oscilloscope (3) p - n junction diode (4) Sonometer

Description : The waveform of a certain signal can be studied by – (1) Spectrometer (2) Cathode ray oscilloscope (3) p - n junction diode (4) Sonometer

Last Answer : (4) Sonometer Explanation: A spectrometer is an instrument used to measure properties of light over a specific portion of the electromagnetic spectrum. Cathode ray oscilloscope is an electronic display ... electron beam that is used to produce visible patterns or graphs on a phosphorescent screen.

The waveform of a certain signal can be studied by (1) Spectrometer (2) Cathode ray oscilloscope (3) p – n junction diode (4) Sonometer

Description : The waveform of a certain signal can be studied by (1) Spectrometer (2) Cathode ray oscilloscope (3) p – n junction diode (4) Sonometer

Last Answer : Sonometer

A ____ is a device that can test all pins of an IC at the same time.

Description : A ____ is a device that can test all pins of an IC at the same time.

Last Answer : logic clip

A ____ is a device that can test all pins of an IC at the same time.

Description : A ____ is a device that can test all pins of an IC at the same time.

Last Answer : logic clip

What is a filter used for ?

Description : What is a filter used for ?

Last Answer : The half wave and full wave signals are pulsating D . C . voltages. The use of such voltages is limited to charging batteries, running D. C. motors, and a few other applications. What we really ... voltage from a battery. To get a constant voltage from this, we can use a capacitor input filter. 

What is Zener Diode ? What is a voltage Regulator ?

Description : What is Zener Diode ? What is a voltage Regulator ?

Last Answer : The breakdown region of a p n diode can be made very sharp and almost vertical Diodes with almost vertical breakdown region are known as Zever Diodes. A Zener diodes operating in the breakdown ... VOLTAGE REGULATOR : The output remains constant despite changes in input voltage due to Zever effect.  

What is transistor ? What are the different types ?

Description : What is transistor ? What are the different types ?

Last Answer : A transistor is a three lagged semi conductor device. Basically a transistor means (transfer - resister). Whether the transistor is pnp or npn it resembles two diodes (back to back). The one of the left ... transistor : Emitter - Base - Forward Bias. Collector - Base - Reverse Bias. 

What is CB, CE and CC configuration ?

Description : What is CB, CE and CC configuration ?

Last Answer : Buffer : A device or a circuit used to isolate two pt'ne circuits or stages. The emitter follows is a example of buffer. Alpha = IC / IE Beta = IC / IB

How will you test a transistor with a multimeter. ?

Description : How will you test a transistor with a multimeter. ?

Last Answer : 1. Emitter +ve of meter and Base -ve output = Low resistance 2. Emitter -ve of meter and base +ve output = High resistance. 3. Collector +ve and Base -ve output = Low. 4. Collector -ve and base +ve output = High. Emitter : Collector = High Resistance. PNP : Opposite Results. 

What is a thyristor ? What are its uses ?

Description : What is a thyristor ? What are its uses ?

Last Answer : A thyristor is a special kind of semi conductor device that uses internal feedback to produce latching action. Use : Used for controlling large amounts of load power in motors, heaters, lighting systems etc ... the latches like a open switch. This latch will always stay in open or close position.  

What does a transmitter output start from 3-15 psi or (0.2 - 1 Kg/Cm2) or 4 - 20 ma. etc. ?

Description : What does a transmitter output start from 3-15 psi or (0.2 - 1 Kg/Cm2) or 4 - 20 ma. etc. ? 

Last Answer : The transmitter output stance from what is known as "live zero". This system has specific advantages : 1. The systems automatically alarms when the signal system becomes inoperative. ... transmitter operating, but transmitting a zero measurement and a failure, in the signal system. 

What are Intrinsically safe system ?

Description : What are Intrinsically safe system ?

Last Answer : Intrinsic safety is a technique for designing electrical equipment for safe use in locations made hazardous by the presence of flammable gas or vapors in air. "Defn. :" Intrinsically safe circuit is ... , unfortunately, been adopted in all countries. However two sets of codes in common use are.  

What is feed back control ? What is feed forward control ? Discuss its application ?

Description : What is feed back control ? What is feed forward control ? Discuss its application ?

Last Answer : Feed back control: Feed back control involves the detection of the controlled variable and counteracting of charges its it's value relative to set point, by adjustment of a manipulated ... controller for a particular process application, two factors time and gain must be considered.