Should emergency vehicles have a device that turns all lights green?

Should emergency vehicles have a device that turns all lights green?
by

1 Answer

Answer :

Things are bad enough with the noise and flashing lights. When I was a boy, my city ran an experiment, wherein they allowed specific kids of the school safety patrols to control the traffic signals at some busy intersections. The experiment lasted nearly 3 days.
by

Related questions

Are emergency vehicles ever able to influence traffic stop lights?

Description : Are emergency vehicles ever able to influence traffic stop lights?

Last Answer : Yes. It is called traffic signal preemption. There is a little doodad on top of the lights that can be triggered by approaching emergency vehicles.

Emergency vehicles and stop lights that take pictures to give you a ticket: What about this situation?

Description : Emergency vehicles and stop lights that take pictures to give you a ticket: What about this situation?

Last Answer : answer:The law states that you are to move to the right side of the road and yield to emergency vehicles. if going through a red light safely, means yielding to the emergency vehicle, then this is ... you were obeying another traffic law, which is of a higher degree, than simply running a red light.

The front panel display provides lights as green LED represent sand red LED represent _ for device programmer who writes input/output basic: a. Busy and Error b. Error and Busy c. Busy and Busy d. Error and Error

Description : The front panel display provides lights as green LED represent sand red LED represent _ for device programmer who writes input/output basic: a. Busy and Error b. Error and Busy c. Busy and Busy d. Error and Error

Last Answer : a. Busy and Error

Which type of mirror is used in the head lights of vehicles? (1) Plane mirror (2) Concave mirror (3) Convex mirror (4) Parabolic mirror

Description : Which type of mirror is used in the head lights of vehicles? (1) Plane mirror (2) Concave mirror (3) Convex mirror (4) Parabolic mirror

Last Answer : (2) Concave mirror Explanation: Car head lights have concave mirrors because it collects and focuses as much as possible of the light from the bulb and send it out as a fairly tight beam in one ... at the focal point. The reflected light is parallel and gives more visibility to the driver at night.

Which type of mirror is used in the head lights of vehicles ? (1) Plane mirror (2) Concave mirror (3) Convex mirror (4) Parabolic mirror

Description : Which type of mirror is used in the head lights of vehicles ? (1) Plane mirror (2) Concave mirror (3) Convex mirror (4) Parabolic mirror

Last Answer : Concave mirror

A black dog stands in the middle of an intersecton in a town painted black. None of the street lights are working due to a power failure caused by a storm. A car with two broken headlights drives towards the dog but turns in time to avoid hitting him. How could the driver have seen the dog in time? -Riddles

Description : A black dog stands in the middle of an intersecton in a town painted black. None of the street lights are working due to a power failure caused by a storm. A car with two broken headlights drives ... turns in time to avoid hitting him. How could the driver have seen the dog in time? -Riddles

Last Answer : Who said this happened during the night?

What is the rule for emergency vehicles in a roundabout?

Description : What is the rule for emergency vehicles in a roundabout?

Last Answer : Go around again.

Traffic question. Yielding to emergency vehicles. See inside.

Description : Traffic question. Yielding to emergency vehicles. See inside.

Last Answer : answer:I'd try really hard to get out of the vehicle's way. I'd go to the right if I'm on the right side of the road, to the left if I'm on the left side-no way me cutting through ... down the stretch and I dunno what happened after that. It was insane to witness, and I wish I was exaggerating.

Shoulders for high traffic volume roads, should (A) Be stable throughout the year to be used by vehicles in the case of emergency (B) Support and protect the ends of carriage ways (C) Not allow entrance of water to sub-grade (D) All the above

Description : Shoulders for high traffic volume roads, should (A) Be stable throughout the year to be used by vehicles in the case of emergency (B) Support and protect the ends of carriage ways (C) Not allow entrance of water to sub-grade (D) All the above

Last Answer : Answer: Option D

Which of the following modes of transportation is most likely to be used for transporting emergency parts? A)Motor vehicles B)Railroads C)Inland waterways D)Airways E)Pipelines

Description : Which of the following modes of transportation is most likely to be used for transporting emergency parts? A)Motor vehicles B)Railroads C)Inland waterways D)Airways E)Pipelines

Last Answer : D)Airways

When approaching or being approached by an emergency vehicle with its siren andor lights on?

Description : When approaching or being approached by an emergency vehicle with its siren andor lights on?

Last Answer : all traffic, in either direction, must slow down, pull to the right of the road, and stop until the emergency vehicle passes

What lights can I use in case of an emergency?

Description : What lights can I use in case of an emergency?

Last Answer : There are numerous types of lights that can be used. Flashlights and the light sticks that can be cracked to release light can be used. Also solar powered lights, push button stick on lights, and lights that can be run off a generator are options.

How to replace emergency lights?

Description : How to replace emergency lights?

Last Answer : Replacing the emergency lights in your car is actually very easy. All you have to do is remove the light in the rear, then simply replace it with a new one.

If you had access to a device that could make duplicates (copies) of brand new vehicles, enabling you to drive off in it, while leaving the original in its place unharmed... would you do it?

Description : If you had access to a device that could make duplicates (copies) of brand new vehicles, enabling you to drive off in it, while leaving the original in its place unharmed... would you do it?

Last Answer : In a hot flash…I mean yes, of course.

In order to provide the power for a heater and lights which device would be appropriate?

Description : In order to provide the power for a heater and lights which device would be appropriate?

Last Answer : Suitable rated separate circuits with MCBs are advisable.

A ________ is a special program that processes statements written in a particular programming language and turns them into machine language. A. Compiler B. Device Driver C. Assembler D. None of the above

Description : A ________ is a special program that processes statements written in a particular programming language and turns them into machine language. A. Compiler B. Device Driver C. Assembler D. None of the above

Last Answer : A. Compiler

The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 440 volts

Last Answer : Answer: B

The turns ratio of device 'B' shown in the illustration is two to one (total). If 110 volts were applied to terminals 'X1,3' and 'X2,4', what would be indicated across 'H1' and 'H2'? EL-0082 A. 27.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 110 volts were applied to terminals 'X1,3' and 'X2,4', what would be indicated across 'H1' and 'H2'? EL-0082 A. 27.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: D

The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 110 volts B. 220 volts C. 880 volts D. 1760 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 110 volts B. 220 volts C. 880 volts D. 1760 volts

Last Answer : Answer: B

The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X3' and 'X4'? EL-0082 A. 55 volts B. 110 volts C. 440 volts D. 880 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X3' and 'X4'? EL-0082 A. 55 volts B. 110 volts C. 440 volts D. 880 volts

Last Answer : Answer: A

The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X1,3' and 'X2,4'? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 880 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X1,3' and 'X2,4'? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 880 volts

Last Answer : Answer: B

The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: C

The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 120 volts were applied to terminals 'H1' and 'H3', what would appear at 'X1' and 'X2'? EL-0082 A. 15 volts B. 30 volts C. 480 volts D. 960 volts

Description : The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 120 volts were applied to terminals 'H1' and 'H3', what would appear at 'X1' and 'X2'? EL-0082 A. 15 volts B. 30 volts C. 480 volts D. 960 volts

Last Answer : Answer: A

The turns ratio of device 'A' shown in the illustration is four to one and all the taps are equally spaced. If 120 volts were applied between 'X1' and 'X2', what would be indicated across 'H1' and 'H4'? EL-0082 A. 30 volts B. 120 volts C. 480 volts D. 1440 volts

Description : The turns ratio of device 'A' shown in the illustration is four to one and all the taps are equally spaced. If 120 volts were applied between 'X1' and 'X2', what would be indicated across 'H1' and 'H4'? EL-0082 A. 30 volts B. 120 volts C. 480 volts D. 1440 volts

Last Answer : Answer: D

The turns ratio of device 'A' shown in the illustration is four to one and all taps are equally spaced. If 440 volts were applied between 'H1' and 'H4', what would appear across 'X1' and 'X4'? EL-0082 A. 110 volts B. 220 volts C. 440 volts D. 1760 volts

Description : The turns ratio of device 'A' shown in the illustration is four to one and all taps are equally spaced. If 440 volts were applied between 'H1' and 'H4', what would appear across 'X1' and 'X4'? EL-0082 A. 110 volts B. 220 volts C. 440 volts D. 1760 volts

Last Answer : Answer: A

The Best Green Vehicles?

Description : The Best Green Vehicles?

Last Answer : There are a number of great green vehicles out there these days, but you need to consider which ones are best for your particular area. For example, if you find yourself going on a lot of long-distance trips, you may find that a purely electric car doesn't quite work for you.

Today I noticed that my MacBook have this little green lights on the side of the battery and a little button. What are those for?

Description : Today I noticed that my MacBook have this little green lights on the side of the battery and a little button. What are those for?

Last Answer : That’s a battery meter. Press the button and the amount of lights that show up indicates how much you have left. I think it has other indicators as well.

Anyone know the origin of a goodwill wish "Blue skies and green lights?

Description : Anyone know the origin of a goodwill wish "Blue skies and green lights?

Last Answer : answer:Apparently there are a number of references associated with either disc jockeys or late night tv guys. Heres one about Jack Jones: It has also been attributed to Drag Racers who appreciate good weather (blue skies) and stomping on the gas at “go” (Green Lights”).

CAN SOMEONE HELP ME I DONT GET THIS WHY The green light is shining on a green plant in a red pot. There are no other lights in the room. What color will the green plant appear to be?

Description : CAN SOMEONE HELP ME I DONT GET THIS WHY The green light is shining on a green plant in a red pot. There are no other lights in the room. What color will the green plant appear to be?

Last Answer : i need help bruh ee

What instructions do the red , green and yellow lights show ?

Last Answer : : If the red light is on, the car has to wait behind the 'stop line', if the green light is on, the car can move forward and if the yellow light is on, the car has to be prepared to stop.

When operating a powerboat at night you see a green and white lights on another boat what do these lights tell you?

Description : When operating a powerboat at night you see a green and white lights on another boat what do these lights tell you?

Last Answer : Feel Free to Answer

Why are red and green used for stop lights?

Description : Why are red and green used for stop lights?

Last Answer : Feel Free to Answer

What is the duration of 4 way red before the green lights?

Description : What is the duration of 4 way red before the green lights?

Last Answer : The duration can be anywhere from 60 seconds to 120 seconds, oreven more. The timing depends on a traffic engineering study

Lights of different colours are arranged below in order of increasing wavelengths: 1. Violet, indigo, blue 2. Green, orange, red 3. Red, green, indigo 4. Blue, green, yellow Which of the above are in proper sequence? (a) 1 only (b) 1 and 2 (c) 2 and 3 (d) 1 and 4

Description : Lights of different colours are arranged below in order of increasing wavelengths: 1. Violet, indigo, blue 2. Green, orange, red 3. Red, green, indigo 4. Blue, green, yellow Which of the above are in proper sequence? (a) 1 only (b) 1 and 2 (c) 2 and 3 (d) 1 and 4

Last Answer : Ans:(d)

The phenomenon of Aurora Borealis, the display of red and green lights in northern hemisphere is due to radiations from------ ? A. Ionosphere (Answer) B. Troposphere C. Mesosphere D. Stratosphere E. None of these

Description : The phenomenon of Aurora Borealis, the display of red and green lights in northern hemisphere is due to radiations from------ ? A. Ionosphere (Answer) B. Troposphere C. Mesosphere D. Stratosphere E. None of these

Last Answer : A. Ionosphere (Answer)

What does three green lights represents when the landing gear is selected down

Description : What does three green lights represents when the landing gear is selected down

Last Answer : B. The gear is down and locked.

What do three green lights represent when the landing gear is selected down? a. The gear is down b. The gear is down and locked c. The gear and doors are down and locked d. The gear is travelling between up and down

Description : What do three green lights represent when the landing gear is selected down? a. The gear is down b. The gear is down and locked c. The gear and doors are down and locked d. The gear is travelling between up and down

Last Answer : b. The gear is down and locked

What do three green lights represent when the landing gear is selected down? a. The gear is down b. The gear is down and locked c. The gear and doors are down and locked d. The gear is travelling between up and down

Description : What do three green lights represent when the landing gear is selected down? a. The gear is down b. The gear is down and locked c. The gear and doors are down and locked d. The gear is travelling between up and down

Last Answer : b. The gear is down and locked

Arrange the following group of colored lights in the order of INCREASING wavelength: RED, ORANGE, GREEN, BLUE

Description : Arrange the following group of colored lights in the order of INCREASING wavelength: RED, ORANGE, GREEN, BLUE

Last Answer : ANSWER: BLUE, GREEN, ORANGE, RED

green plant with large heart shaped leaves,small yellow blooms and seed pod that turns black as it dries

Description : green plant with large heart shaped leaves,small yellow blooms and seed pod that turns black as it dries

Last Answer : Need Answer

A gas turns lime water milky and acidified `K_(2)Cr_(2)O_(7)` solution green then gas is :

Description : A gas turns lime water milky and acidified `K_(2)Cr_(2)O_(7)` solution green then gas is :

Last Answer : A gas turns lime water milky and acidified `K_(2)Cr_(2)O_(7)` solution green then gas is : A. `HCl` B. `H_(2)S` C. `SO_(2)` D. `CO_(2)`

Is a copper turns green when exposed to the environment a chemical change?

Description : Is a copper turns green when exposed to the environment a chemical change?

Last Answer : Chemical because it is being exposed to another compound andforming a new substance

An aluminium strip is kept immersed in a freshly prepared ferrous sulphate solution taken in a test tube, the change observed is that a) Green solution slowly turns brown b) Lower end of the test tube becomes slightly warm c)A colourless gas with smell of burning sulphur is evolved c)Light green solution changes to blue

Description : An aluminium strip is kept immersed in a freshly prepared ferrous sulphate solution taken in a test tube, the change observed is that a) Green solution slowly turns brown b) Lower end of the test ... c)A colourless gas with smell of burning sulphur is evolved c)Light green solution changes to blue

Last Answer : a) Green solution slowly turns brown

A green coloured solid compound ̳X‘, gets oxidized to reddish brown solid in presence of air. ̳X‘ on heating gives brown coloured solid ̳Y‘ and two pungent smelling gases ̳A‘ and ̳B‘. ̳A‘ turns acidified potassium dichromate solution green. Name ̳X‘, ̳Y‘, ̳A‘ , ̳B‘ and type of Reaction. (a) CuSO 4 , CuO, SO 2 , SO 3 , decomposition (b) FeSO 4 , Fe, SO 2 , SO 3 , decomposition (c) FeSO 4 , Fe 2 O 3, SO 2 , SO 3 , decomposition (d) FeSO 4 , Fe 2 O 3 , SO 3 , SO 2 , decomposition

Description : A green coloured solid compound ̳X , gets oxidized to reddish brown solid in presence of air. ̳X on heating gives brown coloured solid ̳Y and two pungent smelling gases ̳A and ̳B . ̳A turns acidified potassium ... , SO 3 , decomposition (d) FeSO 4 , Fe 2 O 3 , SO 3 , SO 2 , decomposition

Last Answer : (c) FeSO 4 , Fe 2 O 3, SO 2 , SO 3 , decomposition

An emergency portable device to save a person from a rushing tsunami-?

Description : An emergency portable device to save a person from a rushing tsunami-?

Last Answer : Getting air would be a problem, as would being swept out to sea.

is there a device that could alert a family member of an emergency on the same property?

Description : is there a device that could alert a family member of an emergency on the same property?

Last Answer : Need Answer

Upon failure of the normal power supply, the emergency generator is placed on the line by the _____________. A. bus tie feeder B. automatic bus transfer device C. line connection feeder D. power failure alarm bus

Description : Upon failure of the normal power supply, the emergency generator is placed on the line by the _____________. A. bus tie feeder B. automatic bus transfer device C. line connection feeder D. power failure alarm bus

Last Answer : Answer: B

In the illustrated 450 VAC system, what should be provided between the bus and the device labeled 'F'? EL-0003 A. a potential transformer B. a current transformer C. an emergency disconnect device D. an audible alarm and indicating light

Description : In the illustrated 450 VAC system, what should be provided between the bus and the device labeled 'F'? EL-0003 A. a potential transformer B. a current transformer C. an emergency disconnect device D. an audible alarm and indicating light

Last Answer : Answer: A

In the illustration, if one of the devices labeled 'TURB' should fail the ___________. EL-0003 A. device labeled 'EXC' will drive the alternator B. device labeled 'BKR' for that alternator should automatically open because of the reverse power relay C. operator must open all the devices labeled 'BKRS' to reduce the load on the remaining turbo-alternator D. emergency generator should automatically start and be placed on line to supply emergency load centers

Description : In the illustration, if one of the devices labeled 'TURB' should fail the ___________. EL-0003 A. device labeled 'EXC' will drive the alternator B. device labeled 'BKR' for that ... -alternator D. emergency generator should automatically start and be placed on line to supply emergency load centers

Last Answer : Answer: B