The hyperboloid cooling towers are often associated __ a. with nuclear power plants b. Used in some coal-fired plants c. In some large chemical and other industrial plants. d. All of the above.

The hyperboloid cooling towers are often associated __
 a. with nuclear power plants
b. Used in some coal-fired plants
c. In some large chemical and other industrial plants.
d. All of the above.
by

1 Answer

Answer :

All of the above
by

Related questions

Hyperbolic cooling towers used in a) Coal-fired power plant b) Nuclear plants c) Thermal power plant d) All of these

Description : Hyperbolic cooling towers used in a) Coal-fired power plant b) Nuclear plants c) Thermal power plant d) All of these

Last Answer : d) All of these

Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Description : Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Last Answer : 200&100

Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____ meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Description : Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____ meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Last Answer : a. 200&100

In hyperboloid cooling towers the material is filled at 1. Tower’s bottom 2. Tower’s top 3. Near tower 4. None of above

Description : In hyperboloid cooling towers the material is filled at 1. Tower’s bottom 2. Tower’s top 3. Near tower 4. None of above

Last Answer : Tower’s top

Hyperbolic cooling towers are also referred as a. Natural draft towers b. Cross flow towers c. Hyperboloid towers d. None of the above

Description : Hyperbolic cooling towers are also referred as a. Natural draft towers b. Cross flow towers c. Hyperboloid towers d. None of the above

Last Answer : Hyperboloid towers

__________ Cooling towers have become the design standard for all natural-draft cooling towers because oftheir structural strength and minimum usage of material. • HCT • CCT • Hyperboloid • None

Description : __________ Cooling towers have become the design standard for all natural-draft cooling towers because oftheir structural strength and minimum usage of material. • HCT • CCT • Hyperboloid • None

Last Answer : Hyperboloid

The hyperbolic cooling towers are associated with ……. and …….. power plants. a) electrical, thermal c) thermal, nuclear b) nuclear, electrical d) none of above

Description : The hyperbolic cooling towers are associated with ……. and …….. power plants. a) electrical, thermal c) thermal, nuclear b) nuclear, electrical d) none of above

Last Answer : thermal, nuclear

There are two huge cooling towers close to building site of reactor __ and __ of the Chernobyl Power Plant. a. 1&3 b. 4&5 c. 2&5 d. 1&4

Description : There are two huge cooling towers close to building site of reactor __ and __ of the Chernobyl Power Plant. a. 1&3 b. 4&5 c. 2&5 d. 1&4

Last Answer : 4&5

. There are two huge cooling towers close to building site of reactor __ and __ of the Chernobyl Power Plant. a. 1&3 b. 4&5 c. 2&5 d. 1&4

Description : . There are two huge cooling towers close to building site of reactor __ and __ of the Chernobyl Power Plant. a. 1&3 b. 4&5 c. 2&5 d. 1&4

Last Answer : b. 4&5

Hyperboloid cooling towers have become the design standard for all _______draft cooling towers because of their structural strength and minimum usage of material. a. Natural b. Induce c. Force d. None

Description : Hyperboloid cooling towers have become the design standard for all _______draft cooling towers because of their structural strength and minimum usage of material. a. Natural b. Induce c. Force d. None

Last Answer : a. Natural

_______ cooling towers use a process similar to the one found in small evaporative cooling units. a. Hyperboloid b. Tower c. Condensate loop d. None

Description : _______ cooling towers use a process similar to the one found in small evaporative cooling units. a. Hyperboloid b. Tower c. Condensate loop d. None

Last Answer : a. Hyperboloid

. _____ type of cooling towers are used with nuclear power plants. a. Cross flow b. Natural draft c. Hyperbolic d. None of above

Description : . _____ type of cooling towers are used with nuclear power plants. a. Cross flow b. Natural draft c. Hyperbolic d. None of above

Last Answer : Hyperbolic

Common applications of Cooling towers include a. Cooling the circulating water used in oil refineries b. petrochemical and other chemical plants c. thermal power stations d. All of the above.

Description : Common applications of Cooling towers include a. Cooling the circulating water used in oil refineries b. petrochemical and other chemical plants c. thermal power stations d. All of the above.

Last Answer : All of the above.

The first hyperboloid shaped cooling tower was introduced by the Dutch engineers Frederik van Iterson and Gerard Kuypers and built in ……….. a) 1918 c) 1919 b) 1870 d) 1920

Description : The first hyperboloid shaped cooling tower was introduced by the Dutch engineers Frederik van Iterson andGerard Kuypers and built in ……….. a) 1918 c) 1919 b) 1870 d) 1920

Last Answer : 1918

The hyperboloid shape also aids in accelerating the upward convective air flow, improving ________ efficiency. • Performance • Cooling • Heating • All of the above

Description : The hyperboloid shape also aids in accelerating the upward convective air flow, improving ________ efficiency. • Performance • Cooling • Heating • All of the above

Last Answer : cooling

What type of cooling system is used in the large power plants? a. Cooling ponds b. Natural flow system c. Cooling towers d. Single deck system

Description : What type of cooling system is used in the large power plants? a. Cooling ponds b. Natural flow system c. Cooling towers d. Single deck system

Last Answer : c. Cooling towers

What type of cooling system is used in the large power plants? A] Cooling ponds B] Natural flow system C] Cooling towers. D] Single deck system

Description : What type of cooling system is used in the large power plants? A] Cooling ponds B] Natural flow system C] Cooling towers. D] Single deck system

Last Answer : C] Cooling towers.

Natural draft cooling towers are mainly used in the _____. • Steel industry • Fertilizer industry • Alumina industry • Power stations

Description : Natural draft cooling towers are mainly used in the _____. • Steel industry • Fertilizer industry • Alumina industry • Power stations

Last Answer : Power stations

What is the extremely large amount of energy associated with the strong bonds within the nucleus of the atom itself called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. Nuclear energy

Description : What is the extremely large amount of energy associated with the strong bonds within the nucleus of the atom itself called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. Nuclear energy

Last Answer : Nuclear energy

Air intake for an air compressor should be preferably taken from (A) A site, where cooling towers are located nearby (B) A site, where open coal yard in located nearby (C) An air conditioned room maintained at a temperature of 18°C (D) An outside atmosphere at 10°C

Description : Air intake for an air compressor should be preferably taken from (A) A site, where cooling towers are located nearby (B) A site, where open coal yard in located nearby (C) An air conditioned room maintained at a temperature of 18°C (D) An outside atmosphere at 10°C

Last Answer : (D) An outside atmosphere at 10°C

Which of the following is considered a renewable resource? w) Coal fired power plant x) Hydroelectric dam y) Combustion turbine facility z) Nuclear fission power plant

Description : Which of the following is considered a renewable resource? w) Coal fired power plant x) Hydroelectric dam y) Combustion turbine facility z) Nuclear fission power plant 

Last Answer : ANSWER: X -- HYDROELECTRIC DAM

The hyperboloid shape also aids in accelerating the upward convective air flow, improving __________ efficiency. a. Heating b. Warming c. Cooling d. Cold

Description : The hyperboloid shape also aids in accelerating the upward convective air flow, improving __________ efficiency. a. Heating b. Warming c. Cooling d. Cold

Last Answer : c. Cooling

Cooling towers operate through a ____process that efficiently cools the already cycled water to be reused. 1. Heat exchange 2. Heat expand 3. Heat transfer 4. None of above

Description : Cooling towers operate through a ____process that efficiently cools the already cycled water to be reused. 1. Heat exchange 2. Heat expand 3. Heat transfer 4. None of above

Last Answer : Heat transfer

How many times chlorination must be carried out for cooling towers 1. Twice a year 2. Once a year 3. Thrice a year 4. None of above

Description : How many times chlorination must be carried out for cooling towers 1. Twice a year 2. Once a year 3. Thrice a year 4. None of above

Last Answer : Twice a year

How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and humid inside air c) Due to the given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Description : How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and ... given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Last Answer : Natural pressure head density between cold outside air and humid inside air

Thermal efficiencies up to........have been observed in hybrid cooling towers a. 92 b. 82 c. 72 d. 62

Description : Thermal efficiencies up to........have been observed in hybrid cooling towers a. 92 b. 82 c. 72 d. 62

Last Answer : 92

. Improved cooling efficiency and minimum usage of material are the key features of ______ a. Natural draft cooling towers b. Cross flow towers c. Hyperbolic cooling d. All of above

Description : . Improved cooling efficiency and minimum usage of material are the key features of ______ a. Natural draft cooling towers b. Cross flow towers c. Hyperbolic cooling d. All of above

Last Answer : Hyperbolic cooling

Which type of cooling towers operate through a chimney or stack ___ a. Cross flow b. Counter flow c. Hyperbolic d. All of above

Description : Which type of cooling towers operate through a chimney or stack ___ a. Cross flow b. Counter flow c. Hyperbolic d. All of above

Last Answer : Hyperbolic

. ______ type of cooling towers are structurally strong. a. Counter flow towers b. Hyperbolic towers c. Cross flow towers d. None of the above

Description : . ______ type of cooling towers are structurally strong. a. Counter flow towers b. Hyperbolic towers c. Cross flow towers d. None of the above

Last Answer : Hyperbolic towers

Hyperbolic cooling towers have become design standard for all natural draft structural towers because usage of . a. Their structural strength b. Minimum usage of material. c. Improving cooling efficiency d. All of the above.

Description : Hyperbolic cooling towers have become design standard for all natural draft structural towers because usage of . a. Their structural strength b. Minimum usage of material. c. Improving cooling efficiency d. All of the above.

Last Answer : All of the above.

Which one of the following fill material is more energy efficient for cooling towers in case of sea water cooling? • Splash fill • Film fill • Low clog film fill • None of the above

Description : Which one of the following fill material is more energy efficient for cooling towers in case of sea water cooling? • Splash fill • Film fill • Low clog film fill • None of the above

Last Answer : Film fill

Hyperbolic cooling towers are made up of high height reinforced ………structure. a) plastic c)metal b) alloy d) concrete

Description : Hyperbolic cooling towers are made up of high height reinforced ………structure. a) plastic c)metal b) alloy d) concrete

Last Answer : concrete

How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and humid inside air c) Due to the given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Description : How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and ... given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Last Answer : Natural pressure head density between cold outside air and humid inside air

. Most cooling towers are capacity rated at a "standard" wet bulb temperature of ___of • 72°F • 52°F • 78°F • 75°F

Description : . Most cooling towers are capacity rated at a "standard" wet bulb temperature of ___of • 72°F • 52°F • 78°F • 75°F

Last Answer : 78°F

There are _______main types of cooling towers that are defined by how water or air passes through them. a. One b. Two c. Three d. Four

Description : There are _______main types of cooling towers that are defined by how water or air passes through them. a. One b. Two c. Three d. Four

Last Answer : three

In coal fired power plants, electrostatic precipitators are fitted to control emission of

Description : In coal fired power plants, electrostatic precipitators are fitted to control emission of

Last Answer : In coal fired power plants, electrostatic precipitators are fitted to control emission of A. `NO_(x)` B. CO C. SPM D. `SO_2`

Electricity generated by coal-fired power plants i the United States in 1990 was approximately what percentage of the entire electricity produced by all sources of power production?

Description : Electricity generated by coal-fired power plants i the United States in 1990 was approximately what percentage of the entire electricity produced by all sources of power production? w) 10 percent x) 25 percent y) 55 percent z) 90 percent

Last Answer : ANSWER: Y -- 55 PERCENT

Natural Draft or Hyperbolic towers have been used for • Large Capacity of water • Small Capacity of Water • High Efficiency • Low capital cost

Description : Natural Draft or Hyperbolic towers have been used for • Large Capacity of water • Small Capacity of Water • High Efficiency • Low capital cost

Last Answer : Large Capacity of water

Why cooling towers require in the Steam power plant ?

Description : Why cooling towers require in the Steam power plant ?

Last Answer : Cooling towers cool the warm water discharged from the condenser and feed the cooled water back to the condenser. There are two types of cooling methods provided in the cooling towers, they can be either ... finned tubes over which cooling air is passed. Heat is rejected to air as water is cooled

What are built to cool down the cooling water in a power plant 1 Towers 2 Cooling pond 3 Air filter 4 non of these

Description : What are built to cool down the cooling water in a power plant 1 Towers 2 Cooling pond 3 Air filter 4 non of these

Last Answer : 1 Towers

Hyperbolic cooling towers generally used in the a) Steel industry b) Fertilizer industry c) Alumina industry d) Power industry

Description : Hyperbolic cooling towers generally used in the a) Steel industry b) Fertilizer industry c) Alumina industry d) Power industry

Last Answer : d) Power industry

Assuming the US reduces coal use due to negative externalities, should the US restrict coal exports to China and India who seek to use and build more coal-fired electrical generating plants?

Description : Assuming the US reduces coal use due to negative externalities, should the US restrict coal exports to China and India who seek to use and build more coal-fired electrical generating plants?

Last Answer : Coal jobs are already being lost at an alarming rate. If we don’t mine it, it will come from other coal exporting countries. I don’t see any benefit to hurting ourselves in a futile attempt to manage other countries.

In a coal-fired power plant, electrostatic precipitators are installed to control the emission of

Description : In a coal-fired power plant, electrostatic precipitators are installed to control the emission of

Last Answer : In a coal-fired power plant, electrostatic precipitators are installed to control the emission of A. `CO` B. `SO_(2)` C. `NO_(8)` D. SPM

In a coal fired power plant electrostatic precipitators are installed to control emission of (a) NOX (b) SPM (c) CO (d) SO2

Description : In a coal fired power plant electrostatic precipitators are installed to control emission of (a) NOX (b) SPM (c) CO (d) SO2

Last Answer : (b) SPM

A ultra-super critical boiler technology is today the option of choice for most new……. fired power stations. a) Coal b) Natural gas c) Biogas d) Oil

Description : A ultra-super critical boiler technology is today the option of choice for most new……. fired power stations. a) Coal b) Natural gas c) Biogas d) Oil

Last Answer : a) Coal

24. Find out the ‗odd‘ among the following choices for fuel substitution for industrial sector of India. a) LDO with LSHS b) Coal with rice husk c) Natural gas for fertilizer plant d) LPG for soft coke

Description : Find out the ‗odd‘ among the following choices for fuel substitution for industrial sector of India. a) LDO with LSHS b) Coal with rice husk c) Natural gas for fertilizer plant d) LPG for soft coke

Last Answer :  LPG for soft coke

A waste heat recovery system in industrial process has been key to reduce ....... Consumption. a) Coal b) Fuel c) Biogas d) Oil

Description : A waste heat recovery system in industrial process has been key to reduce ....... Consumption. a) Coal b) Fuel c) Biogas d) Oil

Last Answer : Fuel

Why aren't the reactors and cooling tanks of nuclear power plants built below water level?

Description : Why aren't the reactors and cooling tanks of nuclear power plants built below water level?

Last Answer : answer:What would keep that water in once the area was flooded? If you open a dam, remove a levy, or open some kind of gate that water can flow both ways. A pump would allow you to control what comes and goes.

Of the following, which non-fissioning element is used in the cooling water of nuclear power plants to help control the rate of the fission reaction by absorbing neutrons: w) zirconium x) boron y) krypton z) cesium

Description : Of the following, which non-fissioning element is used in the cooling water of nuclear power plants to help control the rate of the fission reaction by absorbing neutrons: w) zirconium x) boron y) krypton z) cesium

Last Answer : ANSWER: X -- BORON

An important safety feature required at U.S. nuclear power plants that was not present at the Chernobyl Power Plant in the Soviet Union was the: w) reactor x) cooling water y) control rods z) containment building

Description : An important safety feature required at U.S. nuclear power plants that was not present at the Chernobyl Power Plant in the Soviet Union was the: w) reactor x) cooling water y) control rods z) containment building

Last Answer : ANSWER: Z -- CONTAINMENT BUILDING