If water required for 1 bag of cement is 30 litres, the water cement ratio is: (A) 0.40 (B) 0.50 (C) 0.60 (D) None of these

If water required for 1 bag of cement is 30 litres, the water cement ratio is:
(A) 0.40
(B) 0.50
(C) 0.60
(D) None of these
by

1 Answer

Answer :

Answer: Option C
by

Related questions

Minimum required water cement ratio for a workable concrete, is (A) 0.30 (B) 0.40 (C) 0.50 (D) 0.60

Description : Minimum required water cement ratio for a workable concrete, is (A) 0.30 (B) 0.40 (C) 0.50 (D) 0.60

Last Answer : Answer: Option B

For a 50 kg cement bag water required, is (A) 16.5 litres (B) 18.5 litres (C) 20.5 litres (D) 22.5 litres

Description : For a 50 kg cement bag water required, is (A) 16.5 litres (B) 18.5 litres (C) 20.5 litres (D) 22.5 litres

Last Answer : Answer: Option D

For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of aggregates (C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Description : For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of ... C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Last Answer : Answer: Option D

Water cement ration is, usually, expressed in (a) Litres of water required per bag of cement (b) Litres of water required per kg of cement (c) Both (a) and (b) (d) None of these

Description : Water cement ration is, usually, expressed in (a) Litres of water required per bag of cement (b) Litres of water required per kg of cement (c) Both (a) and (b) (d) None of these

Last Answer : (a) Litres of water required per bag of cement

One bag of cement is equivalent to [ A ] 50 litres [ B ] 35 litres [ C ] 28 litres [ D ] 14 litres

Description : One bag of cement is equivalent to [ A ] 50 litres [ B ] 35 litres [ C ] 28 litres [ D ] 14 litres

Last Answer : [ B ] 35 litres

Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Description : Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (A) 30 %

For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 k

Description : For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 kg

Last Answer : Answer: Option C

For one bag of cement water required is (a) 10 kg (b) 30 kg (c) 35 kg (d) 39 kg

Description : For one bag of cement water required is (a) 10 kg (b) 30 kg (c) 35 kg (d) 39 kg

Last Answer : (c) 35 kg

Water cement ratio is generally expressed in volume of water required per (A) 10 kg (B) 20 kg (C) 30 kg (D) 50 kg

Description : Water cement ratio is generally expressed in volume of water required per (A) 10 kg (B) 20 kg (C) 30 kg (D) 50 kg

Last Answer : Answer: Option D

The normal values of over flow rates for secondary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 10,000 litres/sqm/day

Description : The normal values of over flow rates for secondary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 10,000 litres/sqm/day

Last Answer : ANS: A

The normal value of over flow rates for plain primary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Description : The normal value of over flow rates for plain primary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Last Answer : ANS: B

The normal values of over flow rates for sedimentation tanks using coagulant, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Description : The normal values of over flow rates for sedimentation tanks using coagulant, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Last Answer : ANS: C

A well penetrates to 30 m below the static water table. After 24 hours of pumping at 31.40 litres/minute, the water level in a test well at a distance of 80 m is lowered by 0.5 m and in a well 20 m away water is lowered by 1.0 m. The transmissibility of the aquifer, is (A) 1.185 m2 /minute(B) 1.285 m2/minute (C) 1.385 m2/minute (D) 1.485 m2/minute

Description : A well penetrates to 30 m below the static water table. After 24 hours of pumping at 31.40 litres/minute, the water level in a test well at a distance of 80 m is lowered by 0.5 m and in a well 20 m away water is ... 1.185 m2 /minute (B) 1.285 m2 /minute (C) 1.385 m2 /minute (D) 1.485 m2 /minute

Last Answer : Answer: Option C

For Unbraced column, the ratio of the clear height of the column to the minimum dimension of the column shall not exceed [ A ] 30 [ B ] 40 [ C ] 50 [ D ] 60

Description : For Unbraced column, the ratio of the clear height of the column to the minimum dimension of the column shall not exceed [ A ] 30 [ B ] 40 [ C ] 50 [ D ] 60

Last Answer : [ A ] 30

High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Description : High strength of concrete requires a water cement ratio of [ A ] 0.10 to 0.15 [ B ] 0.25 to 0.30 [ C ] 0.45 to 0.60 [ D ] 0.75 to 0.90

Last Answer : [ B ] 0.25 to 0.30

For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm

Description : For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm

Last Answer : Answer: Option A

The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Description : The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Last Answer : Answer: Option C

The process of mixing, transporting, placing and compacting concrete using Ordinary Port land Cement should not take more than (A) 30 minutes (B) 40 minutes (C) 60 minutes (D) 90 minutes

Description : The process of mixing, transporting, placing and compacting concrete using Ordinary Port land Cement should not take more than (A) 30 minutes (B) 40 minutes (C) 60 minutes (D) 90 minutes

Last Answer : Answer: Option A

A sample of x litres from a container having a 60 litre mixture of milk and water containing milk and water in the ratio of 2 : 3 is replaced with pure milk so that the container will have milk and water in equal proportions. What is the value of x? a) 6 litres b) 10 litres c) 30 litres d) None of these

Description : A sample of x litres from a container having a 60 litre mixture of milk and water containing milk and water in the ratio of 2 : 3 is replaced with pure milk so that the container will have milk and water in equal ... . What is the value of x? a) 6 litres b) 10 litres c) 30 litres d) None of these

Last Answer : C Another way for solving this sum is by choice The mixture of 60 litres has in it 24 litres of milk and 36 litres of water. (2 : 3 :: milk water) When you remove x litres from it, you ... have 30 litres of milk and 30 litres of water - i.e. milk and water are in equal proportion.

If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Description : If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Last Answer : Answer: Option C

If four fires break out in a city of population 40 lakhs and if each hydrant has three streams and duration of each fire is four hours, the total quantity of water required, is (A) 1880 kilo litres (B) 2880 kilo litres (C) 3880 kilo litres (D) 4880 kilo litres

Description : If four fires break out in a city of population 40 lakhs and if each hydrant has three streams and  duration of each fire is four hours, the total quantity of water required, is  (A) 1880 kilo litres  (B) 2880 kilo litres  (C) 3880 kilo litres  (D) 4880 kilo litres 

Last Answer : (B) 2880 kilo litres 

Standard bag of cement in ……… kg a) 52 kg b) 30.5kg c) 10.7kg d) 50 kg*

Description : Standard bag of cement in ……… kg a) 52 kg b) 30.5kg c) 10.7kg d) 50 kg*

Last Answer : d) 50 kg*

As per IS : 1172-1963, water required per head per day for average domestic purposes, is (A) 50 litres (B) 65 litres (C) 85 litres (D) 135 litres

Description : As per IS : 1172-1963, water required per head per day for average domestic purposes, is  (A) 50 litres  (B) 65 litres  (C) 85 litres  (D) 135 litres

Last Answer : (D) 135 litres

Water required per bag of cement, is (A) 7 kg (B) 14 kg (C) 21 kg (D) 35 kg

Description : Water required per bag of cement, is (A) 7 kg (B) 14 kg (C) 21 kg (D) 35 kg

Last Answer : (D) 35 kg

Pick up the correct statement from the following: (A) Bricks are paid per thousand (B) Cement is paid per 50 kg bag (C) Lime is paid per quintal (D) All the above

Description : Pick up the correct statement from the following: (A) Bricks are paid per thousand (B) Cement is paid per 50 kg bag (C) Lime is paid per quintal (D) All the above

Last Answer : (D) All the above

The specifications of a cement bag for storage, are (A) Weight 50 kg (B) Height 18 cm (C) Plan area 3000 sq. cm (D) All the above

Description : The specifications of a cement bag for storage, are (A) Weight 50 kg (B) Height 18 cm (C) Plan area 3000 sq. cm (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Description : Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Last Answer : Answer: Option D

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Description : Pick up the correct statement from the following: (A) The weight of ingredients of concrete mix, is taken in kilograms (B) Water and aggregates are measured in litres (C) 20 bags of cement make one tonne (D) All the above

Last Answer : Answer: Option D

The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Description : The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Last Answer : (B) 30 to 35

The ductility value of bitumen for suitability in road construction should not be less than (A) 30 cm (B) 40 cm (C) 50 cm (D) 60 cm

Description : The ductility value of bitumen for suitability in road construction should not be less than (A) 30 cm (B) 40 cm (C) 50 cm (D) 60 cm

Last Answer : Answer: Option C

The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Description : The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (C) 50 %

The diameter of the Vicat plunger is 10 mm and its length varies from (A) 20 mm to 30 mm (B) 30 mm to 40 mm (C) 40 mm to 50 mm (D) 50 mm to 60 mm

Description : The diameter of the Vicat plunger is 10 mm and its length varies from (A) 20 mm to 30 mm (B) 30 mm to 40 mm (C) 40 mm to 50 mm (D) 50 mm to 60 mm

Last Answer : Answer: Option C

If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Description : If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Last Answer : Answer: Option C

In order to avoid the material failure in a braced column, the clear distance between restraints should never exceed [ A ] 30 times the minimum dimensions of the column [ B ] 40 times the minimum dimensions of the column [ C ] 50 times the minimum dimensions of the column [ D ] 60 times the minimum dimensions of the column

Description : In order to avoid the material failure in a braced column, the clear distance between restraints should never exceed [ A ] 30 times the minimum dimensions of the column [ B ] 40 times the minimum ... 50 times the minimum dimensions of the column [ D ] 60 times the minimum dimensions of the column

Last Answer : [ D ] 60 times the minimum dimensions of the column

A rural water supply serves a population of 10, 000 at the rate of 50 litres per capita per day . For the chlorine dose of 2 PPM the required amount of bleaching powder with 20% available chlorine will be a. 0.5 kg b. 5 kg * c. 10 kg d. 15 kg

Description : A rural water supply serves a population of 10, 000 at the rate of 50 litres per capita per day . For the chlorine dose of 2 PPM the required amount of bleaching powder with 20% available chlorine will be a. 0.5 kg b. 5 kg * c. 10 kg d. 15 kg

Last Answer : b. 5 kg

The percentage of voids in cement is approximately (A) 25 % (B) 40 % (C) 60 % (D) 80 %

Description : The percentage of voids in cement is approximately (A) 25 % (B) 40 % (C) 60 % (D) 80 %

Last Answer : (B) 40

In a bag there arc coins of 25 paise and 10 paise in the ratio of 6 : 17. If the bag contains Rs. 16 then the number of 10-paise coins is a) 30 b) 40 c) 70 d) 85 e) 65

Description : In a bag there arc coins of 25 paise and 10 paise in the ratio of 6 : 17. If the bag contains Rs. 16 then the number of 10-paise coins is a) 30 b) 40 c) 70 d) 85 e) 65

Last Answer : d) 85

In 165 litres of mixtures of milk and water, water is only 28%. The milkman sold 40 litres of this mixture and then he added 30 litres of pure milk and 13 litres of pure water in the remaining mixture. What is the percentage of water in the final mixture? 1) 29.35% 2) 28. 57% 3) 24. 57% 4) 27. 75% 5) 26. 57%

Description : In 165 litres of mixtures of milk and water, water is only 28%. The milkman sold 40 litres of this mixture and then he added 30 litres of pure milk and 13 litres of pure water in the remaining mixture. What is the percentage ... mixture? 1) 29.35% 2) 28. 57% 3) 24. 57% 4) 27. 75% 5) 26. 57%

Last Answer : 2) 28. 57%

If ‘W’ is the percentage of water required for normal consistency of cement, water to be added for determination of initial setting time is (a) 0.50 W (b) 0.62 W (c) 0.75 W (d) 0.85 W

Description : If ‘W’ is the percentage of water required for normal consistency of cement, water to be added for determination of initial setting time is (a) 0.50 W (b) 0.62 W (c) 0.75 W (d) 0.85 W

Last Answer : (d) 0.85 W

A vessel contains milk and water in the ratio of 4:3. If 14 litres of the mixture is drawn and filled with water, the ratio changes to 3:4. How much milk was there in the vessel initially? a) 24 b) 32 c) 40 d) 48 e) None of these

Description : A vessel contains milk and water in the ratio of 4:3. If 14 litres of the mixture is drawn and filled with water, the ratio changes to 3:4. How much milk was there in the vessel initially? a) 24 b) 32 c) 40 d) 48 e) None of these

Last Answer : Answer: B milk = 4x and water = 3x milk = 4x – 14*4/7 and water = 3x – 14*3/7 + 14 4x – 8: 3x + 8 = 3:4 X = 8, so milk = 8*4 = 32 litres

The minimum water-cement ratio is (a) 0.35 (b) 0.45 (c) 0.50 (d) None of these

Description : The minimum water-cement ratio is (a) 0.35 (b) 0.45 (c) 0.50 (d) None of these

Last Answer : (a) 0.35

An R.C.C. column is treated as long if its slenderness ratio is greater than (A) 30 (B) 35 (C) 40 (D) 50

Description : An R.C.C. column is treated as long if its slenderness ratio is greater than (A) 30 (B) 35 (C) 40 (D) 50

Last Answer : Answer: Option D

An R.C.C. column is treated as short column if its slenderness ratio is less than (A) 30 (B) 35 (C) 40 (D) 50

Description : An R.C.C. column is treated as short column if its slenderness ratio is less than (A) 30 (B) 35 (C) 40 (D) 50

Last Answer : Answer: Option D

Consider a fuzzy set old as defined below Old = {(20, 0.1), (30, 0.2), (40, 0.4), (50, 0.6), (60, 0.8), (70, 1), (80, 1)} Then the alpha-cut for alpha = 0.4 for the set old will be (A) {(40, 0.4)} (B) {50, 60, 70, 80} (C) {(20, 0.1), (30, 0.2)} (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

Description : Consider a fuzzy set old as defined below Old = {(20, 0.1), (30, 0.2), (40, 0.4), (50, 0.6), (60, 0.8), (70, 1), (80, 1)} Then the alpha-cut for alpha = 0.4 for the set old will be (A) {(40, 0.4)} (B) {50, 60, ... , (30, 0.2)} (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

Last Answer : (D) {(20, 0), (30, 0), (40, 1), (50, 1), (60, 1), (70, 1), (80, 1)}

The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Description : The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Last Answer : (c) 70 to 80%

The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes

Description : The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes

Last Answer : Answer: Option B

The normal consistency of ordinary Portland cement is about (A) 10 % (B) 20 % (C) 30 % (D) 40 %

Description : The normal consistency of ordinary Portland cement is about (A) 10 % (B) 20 % (C) 30 % (D) 40 %

Last Answer : Answer: Option C

If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Description : If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Last Answer : Answer: Option D

Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is (A) 28 liters (B) 30 liters (C) 32 liters (D) 34 liters

Description : Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is (A) 28 liters (B) 30 liters (C) 32 liters (D) 34 liters

Last Answer : Answer: Option C