If cross slope of a country is upto 10% the terrain is classified as (A) Plain (B) Rolling (C) Mountainous (D) Steep

If cross slope of a country is upto 10% the terrain is classified as
(A) Plain
(B) Rolling
(C) Mountainous
(D) Steep
by

1 Answer

Answer :

Answer: Option A
by

Related questions

If cross slope of a country is 10% to 25%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Description : If cross slope of a country is 10% to 25%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Last Answer : Answer: Option A

If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Description : If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Last Answer : Answer: Option D

If cross slope of a country is greater than 60%, the terrain is classified as(A) Rolling (B) Mountainous (C) Steep (D) Plain

Description : If cross slope of a country is greater than 60%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Last Answer : Answer: Option C

The minimum design speed of various types of highways in plain terrain is the same as the ruling design speed of (A) Rolling terrain (B) Mountainous terrain (C) Steep terrain (D) None of these

Description : The minimum design speed of various types of highways in plain terrain is the same as the ruling design speed of (A) Rolling terrain (B) Mountainous terrain (C) Steep terrain (D) None of these

Last Answer : Answer: Option A

The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Description : The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Last Answer : Answer: Option D

Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Description : Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Last Answer : Answer: Option C

In marketing channels, conflict occurs in marketing channels working at same level is classified as A. steep conflict B. slope conflict C. vertical conflict D. horizontal conflict

Description : In marketing channels, conflict occurs in marketing channels working at same level is classified as A. steep conflict B. slope conflict C. vertical conflict D. horizontal conflict

Last Answer : D. horizontal conflict

Determine the terrain sensitivity loss for a 4-GHz carrier that is propagating over a very dry, mountainous area. A. -1.25 dB B. -3.05 dB C. -2.01 dB D. -5.01 dB

Description : Determine the terrain sensitivity loss for a 4-GHz carrier that is propagating over a very dry, mountainous area. A. -1.25 dB B. -3.05 dB C. -2.01 dB D. -5.01 dB

Last Answer : A. -1.25 dB

The minimum super-elevation in rolling terrain in plains, is limited to (A) 4 % (B) 5 % (C) 6 % (D) 7 %

Description : The minimum super-elevation in rolling terrain in plains, is limited to (A) 4 % (B) 5 % (C) 6 % (D) 7 %

Last Answer : Answer: Option D

A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Description : A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Last Answer : (A) Steep slope

Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Description : Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Last Answer : Answer: Option D

A steep escarpment that divides Brazil’s interior from it’s coastal plain formed a barrier to transportation for many years.?

Description : A steep escarpment that divides Brazil’s interior from it’s coastal plain formed a barrier to transportation for many years.?

Last Answer : TRUE

Which of the following is not true with regard to the coastal plains of India ? (a) The west coast has a narrow alluvial margin interspersed by hilly terrain (b) The eastern coast has a wide plain with well-developed deltas of the major rivers (c) The west coast has little indentation except towards the south (d) The west and east coasts, have the same alluvial features

Description : Which of the following is not true with regard to the coastal plains of India ? (a) The west coast has a narrow alluvial margin interspersed by hilly terrain (b) The eastern coast has a ... little indentation except towards the south (d) The west and east coasts, have the same alluvial features

Last Answer : Ans: (d)

In plain sedimentation tanks under normal conditions, impurities are removed upto (A) 60 % (B) 70 % (C) 80 % (D) 90 %

Description : In plain sedimentation tanks under normal conditions, impurities are removed upto  (A) 60 %  (B) 70 %  (C) 80 %  (D) 90 %

Last Answer : (B) 70 % 

How do contour lines show a steep slope?

Description : How do contour lines show a steep slope?

Last Answer : The closer together the lines are - the steeper the slope.

What is a material that accumulates at the bottom of a steep slope?

Description : What is a material that accumulates at the bottom of a steep slope?

Last Answer : The general term for material that falls down and gathers at the foot of a steep cliff or mountain face is scree.

How do contour lines show a steep slope?

Description : How do contour lines show a steep slope?

Last Answer : The closer together the lines are - the steeper the slope.

A steep slope on a phase change graph indicates?

Description : A steep slope on a phase change graph indicates?

Last Answer : Heirhey

_______ is more prevalent in analog signals that have steep slopes or whose amplitudes vary rapidly. A. Peak limiting B. Quantization noise C. Granular noise D. Slope overload

Description : _______ is more prevalent in analog signals that have steep slopes or whose amplitudes vary rapidly. A. Peak limiting B. Quantization noise C. Granular noise D. Slope overload

Last Answer : D. Slope overload

Landslides occur because ofA) Rainfall B) Steep slope C) Deforestation D) All of the above.

Description : Landslides occur because of A) Rainfall B) Steep slope C) Deforestation D) All of the above.

Last Answer : D) All of the above.

What causes convective acceleration in fluid flow? (A) Steep slope in flow (B) Unsteady nature of flow (C) Non-uniformity of flow (D) Turbulence in flow

Description : What causes convective acceleration in fluid flow? (A) Steep slope in flow (B) Unsteady nature of flow (C) Non-uniformity of flow (D) Turbulence in flow

Last Answer : (C) Non-uniformity of flow

A man builds a house rectangular in shape. All sides have southern exposure. A bear walks by the house. What color is the bear? Why? (This one could drive you nuts and should only be attempted by those with high self esteem. If you are seeing a therapist, DO NOT ATTEMPT THIS QUESTION!) ...black...bears are black ...white... ...brown...the house is on a steep slope There is no answer and this is a stupid question.

Description : A man builds a house rectangular in shape. All sides have southern exposure. A bear walks by the house. What color is the bear? Why? (This one could drive you nuts and should only be attempted by those ... ..brown...the house is on a steep slope There is no answer and this is a stupid question.

Last Answer : ..white...

A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Description : A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Last Answer : (a) Steep slope*

________are defined as free falling fragments of rocks from steep cliff or slope. (A) Rockfalls (B) Toppling (C) Debris avalanche (D) Earthflow

Description : ________are defined as free falling fragments of rocks from steep cliff or slope. (A) Rockfalls (B) Toppling (C) Debris avalanche (D) Earthflow

Last Answer : (A) Rockfalls  

Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Description : Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Last Answer : (D) Tachometric method

A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The rolling resistance of the road will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Description : A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The ... will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Last Answer : (C) 40 kg/tonne

The average permissible stress in bond for plain bars in tension is (A) Increased by 10% for bars in compression (B) Increased by 25% for bars in compression (C) Decreased by 10% for bars in compression (D) Decreased by 25% for bars in compression

Description : The average permissible stress in bond for plain bars in tension is (A) Increased by 10% for bars in compression (B) Increased by 25% for bars in compression (C) Decreased by 10% for bars in compression (D) Decreased by 25% for bars in compression

Last Answer : Answer: Option B

Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper

Description : Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%? (A) Stainless steel (B) Plain carbon steel (C) Nickel (D) Copper

Last Answer : (B) Plain carbon steel

A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A × d × a × 2g) (B) 2A × d × a × 2g) (C) 2A × - d × a × 2g) (D) 2A × 3/2 - 3/2)/Cd × a × 2g)

Description : A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A d a 2g) (B) 2A d ... 2g) (C) 2A - d a 2g) (D) 2A 3/2 - 3/2)/Cd a 2g)

Last Answer : Answer: Option C

The glycogen content of the liver is upto (A) 6% (B) 8% (C) 10% (D) 12%

Description : The glycogen content of the liver is upto (A) 6% (B) 8% (C) 10% (D) 12%

Last Answer : Answer : A

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

Lead lined equipments & vessels are suitable for handling (A) Hydrochloric acid (10%) (B) Nitric acid (C) Sulphuric acid upto 60°C (D) All (A), (B) and (C)

Description : Lead lined equipments & vessels are suitable for handling (A) Hydrochloric acid (10%) (B) Nitric acid (C) Sulphuric acid upto 60°C (D) All (A), (B) and (C)

Last Answer : (C) Sulphuric acid upto 60°C

Subtense tacheometry is generally preferred to if ground is (A) Flat (B) Undulating (C) Mountainous (D) Deserts

Description : Subtense tacheometry is generally preferred to if ground is  (A) Flat  (B) Undulating  (C) Mountainous  (D) Deserts 

Last Answer : (B) Undulating 

Hydrographic surveys deal with the mapping of (A) Large water bodies (B) Heavenly bodies (C) Mountainous region (D) Canal system

Description : Hydrographic surveys deal with the mapping of (A) Large water bodies (B) Heavenly bodies (C) Mountainous region (D) Canal system

Last Answer : (A) Large water bodies

In high mountainous region, the type of roof generally recommended for buildings, is (A) Shed type (B) Gable type (C) Gambrel type (D) Mansard type

Description : In high mountainous region, the type of roof generally recommended for buildings, is (A) Shed type (B) Gable type (C) Gambrel type (D) Mansard type

Last Answer : Option C

Electrical machines having power outputs ranging from a few kW upto approximately 250 kW may be classified as (a) small size machines (b) medium size machines (c) large size machines (d) any ofthe above

Description : Electrical machines having power outputs ranging from a few kW upto approximately 250 kW may be classified as (a) small size machines (b) medium size machines (c) large size machines (d) any ofthe above

Last Answer : (b) medium size machines

Terrigenous deposits are found in – (1) Deep Sea Plain (2) Ocean Trenches (3) Rift Valley (4) Continental Shelf and Slope

Description : Terrigenous deposits are found in – (1) Deep Sea Plain (2) Ocean Trenches (3) Rift Valley (4) Continental Shelf and Slope

Last Answer : (4) Continental Shelf and Slope Explanation: In oceanography, terrigenous sediments are those derived from the erosion of rocks on land; that is, they are derived from terrestrial (as opposed to ... in submarine canyons on the continental slope. Turbidity currents carry them down into the deep sea.

Terrigenous deposits are found in (1) Deep Sea Plain (2) Ocean Trenches (3) Rift Valley (4) Continental Shelf and Slope

Description : Terrigenous deposits are found in (1) Deep Sea Plain (2) Ocean Trenches (3) Rift Valley (4) Continental Shelf and Slope

Last Answer : Continental Shelf and Slope

If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2(D) D/6m(h1 - h2)3

Description : If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2 (D) D/6m(h1 - h2)3

Last Answer : (C) D/6m(h1 - h2)2

channel is said to be of most economical cross-section, if (A) It gives maximum discharge for a given cross-sectional area and bed slope (B) It has minimum wetted perimeter (C) It involves lesser excavation for the designed amount of discharge (D) All of the above

Description : channel is said to be of most economical cross-section, if (A) It gives maximum discharge for a given cross-sectional area and bed slope (B) It has minimum wetted perimeter (C) It involves lesser excavation for the designed amount of discharge (D) All of the above

Last Answer : Answer: Option D

The camber of shoulders in water bound macadam roads is (A) Equal to the cross slope of pavement (B) Less than the cross slope of pavement (C) Greater than the cross slope of pavement (D) Zero

Description : The camber of shoulders in water bound macadam roads is (A) Equal to the cross slope of pavement (B) Less than the cross slope of pavement (C) Greater than the cross slope of pavement (D) Zero

Last Answer : Answer: Option A

If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Description : If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Last Answer : (B) Bd + Sd2

Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Description : Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Last Answer : (C) An inclined plane surface

What is Europe most mountainous country?

Description : What is Europe most mountainous country?

Last Answer : Switzerland is. Switzerland is well known for the Alps in the south and south east. North of the Alps, the Swiss Plateau runs along the east-west axis of the country. Most of the population ... drawn through Lake Constance. A portion of the southwest border with France is drawn through Lake Geneva.

Bench terraces are constructed in — % land slope area ? a. 10% b. 15% c. 25% d. 20%

Description : Bench terraces are constructed in — % land slope area ? a. 10% b. 15% c. 25% d. 20%

Last Answer : b. 15%

Bench terraces are constructed in — % land slope area ? a. 10% b. 15% c. 25% d. 20%

Description : Bench terraces are constructed in — % land slope area ? a. 10% b. 15% c. 25% d. 20%

Last Answer : b. 15%

The factor to be considered for the source of city water supply, is (A) Quantity and quality of the available water (B) Elevation of the source of water (C) General terrain intervening the area (D) All the above

Description : The factor to be considered for the source of city water supply, is (A) Quantity and quality of the available water (B) Elevation of the source of water (C) General terrain intervening the area (D) All the above

Last Answer : (D) All the above

The representation of general topography of a very flat terrain is possible only (A) By drawing contours at large interval (B) By drawing contours at small interval (C) By giving spot levels at large interval (D) By giving spot levels to salient features at close interval

Description : The representation of general topography of a very flat terrain is possible only (A) By drawing contours at large interval (B) By drawing contours at small interval (C) By giving spot levels at large interval (D) By giving spot levels to salient features at close interval

Last Answer : (D) By giving spot levels to salient features at close interval

The arrangement of terrain features which provides attributes: the shape, size and texture of objects, is called: (A) Spectral variation (B) Spatial variation (C) Temporal variation (D) None of these

Description : The arrangement of terrain features which provides attributes: the shape, size and texture of objects, is called: (A) Spectral variation (B) Spatial variation (C) Temporal variation (D) None of these

Last Answer : Answer: Option B

The interaction of the electromagnetic radiation produced with a specific wave length to illuminate a target on the terrain for studying its scattered radiance, is called: (A) Passive remote sensing (B) Active remote sensing (C) Neutral remote sensing (D) None of these

Description : The interaction of the electromagnetic radiation produced with a specific wave length to illuminate a target on the terrain for studying its scattered radiance, is called: (A) Passive remote sensing (B) Active remote sensing (C) Neutral remote sensing (D) None of these

Last Answer : Answer: Option B