When a plate is immersed in a liquid parallel to the flow, it will be subjected to a pressure __________ that if the same plate is immersed perpendicular to the flow. (A) Less than (B) More than (C) Equal to (D) None of these

When a plate is immersed in a liquid parallel to the flow, it will be subjected to a pressure
__________ that if the same plate is immersed perpendicular to the flow.
(A) Less than
(B) More than
(C) Equal to
(D) None of these
by

1 Answer

Answer :

Answer: Option A
by

Related questions

01. Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, at right angles to the direction of flow of the liquid is known as lift. A) True B) False

Description : 01. Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, at right angles to the direction of flow of the liquid is known as lift. A) True B) False

Last Answer : A

Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, in the direction of flow of the liquid, is known as (A) Lift (B) Drag (C) Stagnation pressure (D) Bulk modulus

Description : Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, in the direction of flow of the liquid, is known as (A) Lift (B) Drag (C) Stagnation pressure (D) Bulk modulus

Last Answer : Answer: Option B

Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed column, but the liquid hold up is more in the case of plate column (C) For the same duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed ... duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Choose the wrong statement (A) Any weight, floating or immersed in a liquid, is acted upon by a buoyant force (B) Buoyant force is equal to the weight of the liquid displaced (C) The point through which buoyant force acts, is called the center of buoyancy (D) Center of buoyancy is located above the center of gravity of the displaced liquid

Description : Choose the wrong statement (A) Any weight, floating or immersed in a liquid, is acted upon by a buoyant force (B) Buoyant force is equal to the weight of the liquid displaced (C) The ... the center of buoyancy (D) Center of buoyancy is located above the center of gravity of the displaced liquid

Last Answer : Answer: Option D

When a body is immersed wholly or partially in a liquid, it is lifted up by a force equal to the weight of liquid displaced by the body. This statement is called (A) Pascal's law (B) (C) Principle of floatation (D) Bernoulli's theorem

Description : When a body is immersed wholly or partially in a liquid, it is lifted up by a force equal to the weight of liquid displaced by the body. This statement is called (A) Pascal's law (B) (C) Principle of floatation (D) Bernoulli's theorem

Last Answer : Answer: Option B

The average coefficient of permeability of natural deposits (A) Parallel to stratification is always greater than that perpendicular to stratification (B) Parallel to stratification is always less than that perpendicular to stratification (C) Is always same in both directions (D) Parallel to stratification may or may not be greater than that perpendicular to stratification

Description : The average coefficient of permeability of natural deposits (A) Parallel to stratification is always greater than that perpendicular to stratification (B) Parallel to stratification is always less ... D) Parallel to stratification may or may not be greater than that perpendicular to stratification

Last Answer : Answer: Option A

According to the principle of buoyancy a body totally or partially immersed in a fluid will be lifted up by a force equal to (A) The weight of the body (B) More than the weight of the body (C) Less than the weight of the body (D) Weight of the fluid displaced by the body

Description : According to the principle of buoyancy a body totally or partially immersed in a fluid will be lifted up by a force equal to (A) The weight of the body (B) More than the weight of the body (C) Less than the weight of the body (D) Weight of the fluid displaced by the body

Last Answer : Answer: Option D

The total pressure on a horizontally immersed surface is (where w = Specific weight of the liquid, A = Area of the immersed surface, and x = Depth of the centre of gravity of the immersed surface from the liquid surface) (A) wA (B) wx (C) wAx (D) wA/x

Description : The total pressure on a horizontally immersed surface is (where w = Specific weight of the liquid, A = Area of the immersed surface, and x = Depth of the centre of gravity of the immersed surface from the liquid surface) (A) wA (B) wx (C) wAx (D) wA/x

Last Answer : Answer: Option C

Resultant pressure of the liquid in the case of an immersed body acts through (A) Centre of gravity (B) Centre of pressure (C) Metacentre (D) Centre of buoyancy

Description : Resultant pressure of the liquid in the case of an immersed body acts through (A) Centre of gravity (B) Centre of pressure (C) Metacentre (D) Centre of buoyancy

Last Answer : Answer: Option B

The center of gravity of the volume of the liquid displaced by an immersed body is called (A) Metacentre (B) Center of pressure (C) Center of buoyancy (D) Center of gravity

Description : The center of gravity of the volume of the liquid displaced by an immersed body is called (A) Metacentre (B) Center of pressure (C) Center of buoyancy (D) Center of gravity

Last Answer : Answer: Option C

The centre of gravity of the volume of the liquid displaced by an immersed body is called (A) Centre of gravity (B) Centre of pressure (C) Metacentre (D) Centre of buoyancy

Description : The centre of gravity of the volume of the liquid displaced by an immersed body is called (A) Centre of gravity (B) Centre of pressure (C) Metacentre (D) Centre of buoyancy

Last Answer : Answer: Option D

The point in the immersed body through which the resultant pressure of the liquid may be taken to act is known as (A) Meta center (B) Center of pressure (C) Center of buoyancy (D) Center of gravity

Description : The point in the immersed body through which the resultant pressure of the liquid may be taken to act is known as (A) Meta center (B) Center of pressure (C) Center of buoyancy (D) Center of gravity

Last Answer : Answer: Option B

The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface) (A) (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Description : The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, ... (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Last Answer : Answer: Option D

In an immersed body, centre of pressure is (A) At the centre of gravity (B) Above the centre of gravity (C) Below be centre of gravity (D) Could be above or below e.g. depending on density of body and liquid

Description : In an immersed body, centre of pressure is (A) At the centre of gravity (B) Above the centre of gravity (C) Below be centre of gravity (D) Could be above or below e.g. depending on density of body and liquid

Last Answer : Answer: Option C

Centre of pressure in an immersed body is __________ the centre of gravity. (A) Above (B) Below (C) At (D) Either above or below; depends on the liquid density

Description : Centre of pressure in an immersed body is __________ the centre of gravity. (A) Above (B) Below (C) At (D) Either above or below; depends on the liquid density

Last Answer : (B) Below

When a vertical wall is subjected to pressures due to liquid on both sides, the resultant pressure is the __________ of the two pressures. (A) Sum (B) Difference (C) Arithmetic mean (D) Geometric mean

Description : When a vertical wall is subjected to pressures due to liquid on both sides, the resultant pressure is the __________ of the two pressures. (A) Sum (B) Difference (C) Arithmetic mean (D) Geometric mean

Last Answer : Answer: Option B

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall acts at a distance __________ from the liquid surface. (A) H/3 (B) H/2 (C) 2H/3 (D) 3H/4

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall acts at a distance __________ from the liquid surface. (A) H/3 (B) H/2 (C) 2H/3 (D) 3H/4

Last Answer : Answer: Option C

The centre of pressure acts __________ the centre of gravity of immersed surface. (A) At (B) Above (C) Below (D) None of these

Description : The centre of pressure acts __________ the centre of gravity of immersed surface. (A) At (B) Above (C) Below (D) None of these

Last Answer : Answer: Option C

The intensity of pressure on an immersed surface __________ with the increase in depth. (A) Does not change (B) Increases (C) Decreases (D) None of these

Description : The intensity of pressure on an immersed surface __________ with the increase in depth. (A) Does not change (B) Increases (C) Decreases (D) None of these

Last Answer : Answer: Option B

The siphon will work satisfactorily, if the minimum pressure in the pipe is __________ vapour pressure of liquid. (A) Equal to (B) Less than (C) More than (D) None of these

Description : The siphon will work satisfactorily, if the minimum pressure in the pipe is __________ vapour pressure of liquid. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option C

In an external mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to 0.89 times the height of the liquid, above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Description : In an external mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to 0.89 times the height of the liquid, above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

In an internal mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to height of the liquid above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Description : In an internal mouthpiece, the absolute pressure head at vena contracta is __________ the atmospheric pressure head by an amount equal to height of the liquid above the vena contracta. (A) Less than (B) More than (C) Equal to (D) None of these

Last Answer : Answer: Option A

Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings at angles not less than 45°, is known as quarter sawing method (C) Cut out of quarter logs, parallel to the medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Description : Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings ... medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Last Answer : Answer: Option D

A parallel plate capacitor with area of each plate equal to `S` and the separation between them to `d` is put into a stream of conducting liquid with

Description : A parallel plate capacitor with area of each plate equal to `S` and the separation between them to `d` is put into a stream of conducting liquid with

Last Answer : A parallel plate capacitor with area of each plate equal to `S` and the separation between them to ... highest? What is this highest power equla to ?

In case of parallel flow heat exchanger, the lowest temperature theoretically attainable by the hot fluid is __________ the outlet temperature of the cold fluid. (A) Equal to (B) More than (C) Less than (D) Either more or less than (depending upon the fluid)

Description : In case of parallel flow heat exchanger, the lowest temperature theoretically attainable by the hot fluid is __________ the outlet temperature of the cold fluid. (A) Equal to (B) More than (C) Less than (D) Either more or less than (depending upon the fluid)

Last Answer : (A) Equal to

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Drag co-efficient for flow past immersed body is the ratio of __________ to the product of velocity head and density. (A) Shear stress (B) Shear force (C) Average drag per unit projected area (D) None of these

Description : Drag co-efficient for flow past immersed body is the ratio of __________ to the product of velocity head and density. (A) Shear stress (B) Shear force (C) Average drag per unit projected area (D) None of these

Last Answer : (C) Average drag per unit projected area

Pick out the wrong statement: (A) The vacuum pressure is always the negative gauge pressure (B) The pressure of the liquid measured by a piezometer tube is the gauge pressure (C) Manometric liquid should have high surface tension (D) The point at which the resultant pressure on an immersed surface acts, is known as the centre of gravity

Description : Pick out the wrong statement: (A) The vacuum pressure is always the negative gauge pressure (B) The pressure of the liquid measured by a piezometer tube is the gauge pressure (C) Manometric ... point at which the resultant pressure on an immersed surface acts, is known as the centre of gravity

Last Answer : (D) The point at which the resultant pressure on an immersed surface acts, is known as the centre of gravity

The gaseous form of chlorine gets converted into liquid form when subjected to a pressure of (A) 5 kg/cm2 (B) 6 kg/cm2 (C) 7 kg/cm2 (D) 10 kg/cm

Description : The gaseous form of chlorine gets converted into liquid form when subjected to a pressure of  (A) 5 kg/cm2 (B) 6 kg/cm2 (C) 7 kg/cm2 (D) 10 kg/cm

Last Answer : (C) 7 kg/cm

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid) (A) wH (B) wH/2 (C) wH2 /2 (D) wH2 /3

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid) (A) wH (B) wH/2 (C) wH2 /2 (D) wH2 /3

Last Answer : Answer: Option C

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. Which of the following statement is correct? (A) The pressure on the wall at the liquid level is minimum(B) The pressure on the bottom of the wall is maximum (C) The pressure on the wall at the liquid level is zero, and on the bottom of the wall is maximum (D) The pressure on the bottom of the wall is zero

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. Which of the following statement is correct? (A) The pressure on the wall at the liquid level is maximum (B) ... and on the bottom of the wall is maximum (D) The pressure on the bottom of the wall is zero

Last Answer : Answer: Option C

The maximum longitudinal pitch in bolted joints, subjected to tensile forces, wherein t = thickness of the plate and D = diameter of bolt, is (a) 32 D (b) 16 D (c) 32 t (d) 16 t

Description : The maximum longitudinal pitch in bolted joints, subjected to tensile forces, wherein t = thickness of the plate and D = diameter of bolt, is (a) 32 D (b) 16 D (c) 32 t (d) 16 t

Last Answer : (d) 16 t

In which of the following directions, the strength of timber is maximum? (A) Parallel to grains (B) 45° to grains (C) Perpendicular to grains (D) Same in all directions

Description : In which of the following directions, the strength of timber is maximum? (A) Parallel to grains (B) 45° to grains (C) Perpendicular to grains (D) Same in all directions

Last Answer : Answer: Option A

Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Description : Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) Isotropic consolidation of clay can be obtained in the triaxial apparatus under equal all￾round pressure (B) If the present effective stress is the maximum to which the clay has ever been subjected, it is called normally consolidated clay (C) If the present effective stress in the past was more than present effective stress, it is called over-consolidated clay (D) All the above

Description : Pick up the correct statement from the following: (A) Isotropic consolidation of clay can be obtained in the triaxial apparatus under equal all￾round pressure (B) If the present effective stress is the ... more than present effective stress, it is called over-consolidated clay (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

A streamline is defined as the line (A) Parallel to central axis flow (B) Parallel to outer surface of pipe (C) Of equal velocity in a flow (D) Along which the pressure drop is uniform

Description : A streamline is defined as the line (A) Parallel to central axis flow (B) Parallel to outer surface of pipe (C) Of equal velocity in a flow (D) Along which the pressure drop is uniform

Last Answer : Answer: Option C

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Description : Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Last Answer : (B) More

The force of buoyancy is always __________ the weight of the liquid displaced by the body. (A) Equal to (B) Less than (C) More than (D) None of these

Description : The force of buoyancy is always __________ the weight of the liquid displaced by the body. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option A

The body will float if the force of buoyancy is __________ the weight of the liquid displaced. (A) Equal to (B) Less than (C) More than (D) None of these

Description : The body will float if the force of buoyancy is __________ the weight of the liquid displaced. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option C

The body will sink down if the force of buoyancy is __________ the weight of the liquid displaced. (A) Equal to (B) Less than (C) More than (D) None of these

Description : The body will sink down if the force of buoyancy is __________ the weight of the liquid displaced. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option B

The screens are fixed A. Perpendicular to the direction of flow B. Parallel to the direction of flow C. At an angle 30° to 60° to the direction of flow D. None of these

Description : The screens are fixed A. Perpendicular to the direction of flow B. Parallel to the direction of flow C. At an angle 30° to 60° to the direction of flow D. None of these

Last Answer : ANS: C

In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining the same, the temperature of the exit liquid will be (A) Less than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Description : In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining ... than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Last Answer : (B) More than 45°C

The resultant upward pressure of the fluid on an immersed body due to its tendency to uplift the submerged body is called (A) Up-thrust (B) Reaction (C) Buoyancy (D) Metacentre

Description : The resultant upward pressure of the fluid on an immersed body due to its tendency to uplift the submerged body is called (A) Up-thrust (B) Reaction (C) Buoyancy (D) Metacentre

Last Answer : Answer: Option C

The point at which the resultant pressure on an immersed surface acts, is known as (A) Centre of gravity (B) Centre of depth (C) Centre of pressure (D) Centre of immersed surface

Description : The point at which the resultant pressure on an immersed surface acts, is known as (A) Centre of gravity (B) Centre of depth (C) Centre of pressure (D) Centre of immersed surface

Last Answer : Answer: Option C

Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be (A) 1000 kg (B) 4000 kg (C) 2000 kg (D) 8000 kg

Description : Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be (A) 1000 kg (B) 4000 kg (C) 2000 kg (D) 8000 kg

Last Answer : Answer: Option A

The resultant upward pressure of the fluid on an immersed body is called (A) Up-thrust (B) Buoyancy (C) Center of pressure (D) All the above are correct

Description : The resultant upward pressure of the fluid on an immersed body is called (A) Up-thrust (B) Buoyancy (C) Center of pressure (D) All the above are correct

Last Answer : Answer: Option B