Capillary action is due to the (A) Surface tension (B) Cohesion of the liquid (C) Adhesion of the liquid molecules and the molecules on the surface of a solid (D) All of the above

Capillary action is due to the
(A) Surface tension
(B) Cohesion of the liquid
(C) Adhesion of the liquid molecules and the molecules on the surface of a solid
(D) All of the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

A solid needle placed horizontally on the surface of the water floats due to (a) Surface tension (b) Capillary action (c) Cohesion (d) Adhesion

Description : A solid needle placed horizontally on the surface of the water floats due to (a) Surface tension (b) Capillary action (c) Cohesion (d) Adhesion

Last Answer : Ans:(a)

Property responsible for the talcum powder to cling to the skin is the (A) Capillary action (B) Adhesion (C) Cohesion (D) Surface tension

Description : Property responsible for the talcum powder to cling to the skin is the (A) Capillary action (B) Adhesion (C) Cohesion (D) Surface tension

Last Answer : Option B

The mercury does not wet the glass. This is due to the property of the liquid known as (A) Cohesion (B) Adhesion (C) Viscosity (D) Surface tension

Description : The mercury does not wet the glass. This is due to the property of the liquid known as (A) Cohesion (B) Adhesion (C) Viscosity (D) Surface tension

Last Answer : Answer: Option D

Mercury does not wet glass. This is due to property of liquid known as (A) Adhesion (B) Cohesion (C) Surface tension (D) Viscosity

Description : Mercury does not wet glass. This is due to property of liquid known as (A) Adhesion (B) Cohesion (C) Surface tension (D) Viscosity

Last Answer : Answer: Option C

The tendency of a liquid surface to contract is due to the following property (A) Cohesion (B) Adhesion (C) Viscosity (D) Surface tension

Description : The tendency of a liquid surface to contract is due to the following property (A) Cohesion (B) Adhesion (C) Viscosity (D) Surface tension

Last Answer : Answer: Option D

Rise of liquid in a capillary tube is due to (A) Cohesion (B) Adhesion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Rise of liquid in a capillary tube is due to (A) Cohesion (B) Adhesion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B

If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be(A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Description : If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be (A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Last Answer : Answer: Option C

Falling drops of water become spheres due to the property of (A) Adhesion (B) Cohesion (C) Surface tension (D) Viscosity

Description : Falling drops of water become spheres due to the property of (A) Adhesion (B) Cohesion (C) Surface tension (D) Viscosity

Last Answer : Answer: Option C

How adhesion and cohesion and capillary action enable water to go from the roots to the top a tall tree?

Description : How adhesion and cohesion and capillary action enable water to go from the roots to the top a tall tree?

Last Answer : Water travels up a tree through small tubes called xylem. Aswater is released through the leaves of the tree, it creates anegative pressure at the top of the tree. Even though the weight ofall ... the width of thetube, which means that the xylem and stomata can draw water up andincredible distance.

Surface energy per unit area of a surface is numerically equal to (A) Atmospheric pressure (B) Surface tension (C) Force of adhesion (D) Force of cohesion

Description : Surface energy per unit area of a surface is numerically equal to (A) Atmospheric pressure (B) Surface tension (C) Force of adhesion (D) Force of cohesion

Last Answer : Answer: Option B

The property of a fluid which enables it to resist tensile stress is known as (A) Compressibility (B) Surface tension (C) Cohesion (D) Adhesion

Description : The property of a fluid which enables it to resist tensile stress is known as (A) Compressibility (B) Surface tension (C) Cohesion (D) Adhesion

Last Answer : Answer: Option C

The property of fluid by virtue of which it offers resistance to shear is called (A) Surface tension (B) Adhesion (C) Cohesion (D) Viscosity

Description : The property of fluid by virtue of which it offers resistance to shear is called (A) Surface tension (B) Adhesion (C) Cohesion (D) Viscosity

Last Answer : Answer: Option D

Free surface of a liquid behaves like a sheet and tends to contract to smallest possible area due to the (A) Force of adhesion (B) Force of cohesion (C) Force of friction (D) Force of diffusion

Description : Free surface of a liquid behaves like a sheet and tends to contract to smallest possible area due to the (A) Force of adhesion (B) Force of cohesion (C) Force of friction (D) Force of diffusion

Last Answer : Answer: Option B

The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Description : The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Last Answer : (A) Surface tension

The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Description : The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Last Answer : (A) Surface tension

Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by the force of adhesion between liquid molecules c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Description : Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by ... it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water

Last Answer : c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions

A liquid would wet the solid, if adhesion forces as compared to cohesion forces are (A) Less (B) More (C) Equal (D) Less at low temperature and more at high temperature

Description : A liquid would wet the solid, if adhesion forces as compared to cohesion forces are (A) Less (B) More (C) Equal (D) Less at low temperature and more at high temperature

Last Answer : Answer: Option B

A solid needle placed horizon-tally on the surface of the water floats due to – (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Description : A solid needle placed horizon-tally on the surface of the water floats due to – (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Last Answer : (3) surface tension of water Explanation: A solid needle placed horizontally on the surface of water floats due to surface tension of water.

A solid needle placed horizontally on the surface of the water floats due to (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Description : A solid needle placed horizontally on the surface of the water floats due to (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Last Answer : surface tension of water

Property of a fluid by which its own molecules are attracted is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Description : Property of a fluid by which its own molecules are attracted is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Last Answer : Answer: Option B

Property of a fluid by which molecules of different kinds of fluids are attracted to each other is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Description : Property of a fluid by which molecules of different kinds of fluids are attracted to each other is called (A) Adhesion (B) Cohesion (C) Viscosity (D) Compressibility

Last Answer : Answer: Option A

Free surface of a liquid tends to contract to the smallest possible area due to force of (A) Surface tension (B) Viscosity (C) Friction (D) Cohesion

Description : Free surface of a liquid tends to contract to the smallest possible area due to force of (A) Surface tension (B) Viscosity (C) Friction (D) Cohesion

Last Answer : Answer: Option A

A capillary tube is kept vertical in a beaker containing liquid. The height to which the liquid rises by capillary action is increased if (a) The radius of the capillary is large (b) The radius of the capillary is small (c) The density of the liquid is large (d) The surface tension of the liquid is small

Description : A capillary tube is kept vertical in a beaker containing liquid. The height to which the liquid rises by capillary action is increased if (a) The radius of the capillary is large (b) The radius of the ... small (c) The density of the liquid is large (d) The surface tension of the liquid is small

Last Answer : Ans:(b)

The process of diffusion of one liquid into the other through a semi permeable membrane is called (A) Viscosity (B) Osmosis (C) Surface tension (D) Cohesion

Description : The process of diffusion of one liquid into the other through a semi permeable membrane is called (A) Viscosity (B) Osmosis (C) Surface tension (D) Cohesion

Last Answer : Answer: Option B

Surface tension of a liquid (A) Is due to intermolecular forces of cohesion (B) Decreases with rise in temperature (C) Is responsible for the spherical shape of an isolated liquid drop (D) All (A), (B) & (C)

Description : Surface tension of a liquid (A) Is due to intermolecular forces of cohesion (B) Decreases with rise in temperature (C) Is responsible for the spherical shape of an isolated liquid drop (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the structural relation to displacement of the soil because of the interlocking of the particles (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Description : The shear resistance of a soil is constituted basically of the following component. (A) The frictional resistance to translocation between the individual soil particles at their contact point (B) To the ... (C) Cohesion and adhesion between the surfaces of the soil particles (D) All the above

Last Answer : Answer: Option D

Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : (4) Of the capillary action phenomenon Explanation: It is because of the capillary action phenomenon because of which oil rise up the wick in a lamp. Capillary action, or capillarity, is the ability ... such as paper, in some nonporous materials such as liquefied carbon fiber, or in a cell.

Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : (4) Of the capillary action phenomenon Explanation: It is because of the capillary action phenomenon because of which oil rise up the wick in a lamp. Capillary action, or capillarity, is the ability ... such as paper, in some nonporous materials such as liquefied carbon fiber, or in a cell.

Which of the following is a result of Surface tension? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Description : Which of the following is a result of Surface tension? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Last Answer : (3) Capillary action Explanation: Capillary action is the result of adhesion and surface tension. Adhesion of water to the walls of a vessel will cause an upward force on the liquid at the edges ... intact, so instead of just the edges moving upward, the whole liquid surface is dragged upward.

Which of the following is a result of Surface tension ? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Description : Which of the following is a result of Surface tension ? (1) Gravitational pull (2) Viscosity (3) Capillary action (4) Radiation

Last Answer : Capillary action

Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Description : Oil rises up the wick in a lamp because (1) Oil is very light (2) Of the diffusion of oil through the wick (3) Of the surface tension phenomenon (4) Of the capillary action phenomenon

Last Answer : Of the capillary action phenomenon

Surface tension in a liquid is due to : (1) Adhesive force between molecules (2) Cohesive force between molecules (3) Gravitational force between molecules (4) Electrical force between molecules

Description : Surface tension in a liquid is due to : (1) Adhesive force between molecules (2) Cohesive force between molecules (3) Gravitational force between molecules (4) Electrical force between molecules

Last Answer : (2) Cohesive force between molecules Explanation: Surface tension is a contractive tendency of the surface of a liquid that allows it to resist an external force. This property is caused by cohesion of similar molecules, and is responsible for many of the behaviors of liquids.

Surface tension in a liquid is due to : (1) Adhesive force between molecules (2) Cohesive force between molecules (3) Gravitational force between molecules (4) Electrical force between molecules

Description : Surface tension in a liquid is due to : (1) Adhesive force between molecules (2) Cohesive force between molecules (3) Gravitational force between molecules (4) Electrical force between molecules

Last Answer : (2) Cohesive force between molecules Explanation: Surface tension is a contractive tendency of the surface of a liquid that allows it to resist an external force. This property is caused by cohesion of similar molecules, and is responsible for many of the behaviors of liquids.

The increasing vapor pressure caused by heating a liquid is due to------? A. increase inter-molecular interactions B. increasing potential energy of molecules C. increasing kinetic energy of molecules (Answer) D. decreasing surface tension

Description : The increasing vapor pressure caused by heating a liquid is due to------? A. increase inter-molecular interactions B. increasing potential energy of molecules C. increasing kinetic energy of molecules (Answer) D. decreasing surface tension

Last Answer : C. increasing kinetic energy of molecules (Answer)

Surface tension in a liquid is due to : (1) Adhesive force between molecules (2) Cohesive force between molecules (3) Gravitational force between molecules (4) Electrical force between molecules.

Description : Surface tension in a liquid is due to : (1) Adhesive force between molecules (2) Cohesive force between molecules (3) Gravitational force between molecules (4) Electrical force between molecules.

Last Answer :  Cohesive force between molecules

Cohesion and adhesion in the ascent of xylem sap. -Biology

Description : Cohesion and adhesion in the ascent of xylem sap. -Biology

Last Answer : answer:

On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (a) Mercury is a metal (b) The density of mercury is greater than that of water (c) The cohesion of mercury is greater than its adhesion with glass (d) The cohesion of water is greater than its adhesion with glass

Description : On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (a) Mercury is a metal (b) The density of mercury is greater ... is greater than its adhesion with glass (d) The cohesion of water is greater than its adhesion with glass

Last Answer : Ans:(c)

On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (1) Mercury is a metal (2) Density of mercury is greater than that of water (3) Cohesion of mercury is greater than its adhesion with glass (4) Cohesion of water is greater than its adhesion with glass

Description : On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (1) Mercury is a metal (2) Density of mercury is greater than that ... is greater than its adhesion with glass (4) Cohesion of water is greater than its adhesion with glass

Last Answer : (3) Cohesion of mercury is greater than its adhesion with glass Explanation: When liquid is placed on a smooth surface like glass plate, the relative strengths of the cohesive and adhesive forces acting on ... and a surface are stronger, they will pull the liquid down, causing it to wet the surface.

The rupture and fractionation do not usually occur in the water column in vessel/tracheids during the ascent of sap because of (a) weak gravitational pull (b) transpiration pull (c) lignified thick walls (d) cohesion and adhesion

Description : The rupture and fractionation do not usually occur in the water column in vessel/tracheids during the ascent of sap because of (a) weak gravitational pull (b) transpiration pull (c) lignified thick walls (d) cohesion and adhesion

Last Answer : (d) cohesion and adhesion.

The force that holds two particles of the different kind together is called as a) Adhesion c) Shear force b) Cohesion d) Compressive

Description : The force that holds two particles of the different kind together is called as a) Adhesion c) Shear force b) Cohesion d) Compressive

Last Answer : a) Adhesion

The force that holds two particles of the same kind together is called as a) Adhesion c) shear force b) cohesion d) compressive

Description : The force that holds two particles of the same kind together is called as a) Adhesion c) shear force b) cohesion d) compressive

Last Answer : b) cohesion

On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (1) Mercury is a metal (2) Density of mercury is greater than that of water (3) Cohesion of mercury is greater than its adhesion with glass (4) Cohesion of water is greater than its adhesion with glass

Description : On a clean glass plate a drop of water spreads to form a thin layer whereas a drop of mercury remains almost spherical because (1) Mercury is a metal (2) Density of mercury is greater than that ... is greater than its adhesion with glass (4) Cohesion of water is greater than its adhesion with glass

Last Answer : Cohesion of mercury is greater than its adhesion with glass

Which of the following statement(s) is/are true concerning ischemia reperfusion injury? a. During ischemia, ATP degradation results in increased plasma and intracellular levels of hypoxanthine and xanthene b. Oxygen free radicals such as the superoxide radical are involved in the expression of the proinflammatory phenotype of endothelial cells, macrophages and neutrophils c. The intracellular adhesion molecule-1 (ICAN-1) contributes to injury and disruption of the endothelial lining, with extensive capillary leak and resultant interstitial edema d. Animal models have demonstrated that passive immunization with antibodies to neutrophil adhesive complex lessen the ischemic/reperfusion microvascular injury

Description : Which of the following statement(s) is/are true concerning ischemia reperfusion injury? a. During ischemia, ATP degradation results in increased plasma and intracellular levels of ... immunization with antibodies to neutrophil adhesive complex lessen the ischemic/reperfusion microvascular injury

Last Answer : Answer: a, b, c, d During the ischemia and hypoperfusion phase, degradation of ATP stores essential to maintain cell integrity and significant loss of diffusible ... either the neutrophil adhesive complex or the endothelial selectins dramatically lessens ischemia/reperfusion microvascular injury

If the surface of liquid is convex, men (A) Cohesion pressure is negligible (B) Cohesion pressure is decreased (C) Cohesion pressure is increased (D) There is no cohesion pressure

Description : If the surface of liquid is convex, men (A) Cohesion pressure is negligible (B) Cohesion pressure is decreased (C) Cohesion pressure is increased (D) There is no cohesion pressure

Last Answer : Answer: Option C

Soldering of two metals is possible because of the property of – (1) Viscosity (2) Osmosis (3) Cohesion (4) Surface tension

Description : Soldering of two metals is possible because of the property of – (1) Viscosity (2) Osmosis (3) Cohesion (4) Surface tension

Last Answer : (3) Cohesion Explanation: Soldering is the process of joining two metals by the use of a solder alloy, and it is one of the oldest known joining techniques. It is possible because of the ... through-out the interior of substance. Soldering leads to alloy formation at the layer between two metals.

Soldering of two metals is possible because of the property of : (1) Viscosity (2) Osmosis (3) Cohesion (4) Surface tension

Description : Soldering of two metals is possible because of the property of : (1) Viscosity (2) Osmosis (3) Cohesion (4) Surface tension

Last Answer : Cohesion

Surface tension of liquids is the result of which the following: w) interaction of a liquid with its container x) unbalanced forces on the liquid's surface molecules y) adhesive forces of the liquid z) interaction of the liquid's surface molecules and the applied pressure

Description : Surface tension of liquids is the result of which the following: w) interaction of a liquid with its container x) unbalanced forces on the liquid's surface molecules y) adhesive forces of the liquid z) interaction of the liquid's surface molecules and the applied pressure

Last Answer : ANSWER: X -- UNBALANCED FORCES ON THE LIQUID'S SURFACE MOLECULES

How do I calculate capillary entry pressure for a given pore width and and a known surface tension?

Description : How do I calculate capillary entry pressure for a given pore width and and a known surface tension?

Last Answer : I’m not a scientist but I did have a flash of intuition while reading your question. Must not these calculations have been made when the type of waterproof/breathable fabric that admits vapor but not water? The patents are certainly public.

The following observations were taken for determining surface tension T of water by capillary method: (A) 0.15%  (B) 1.5% 

Description : The following observations were taken for determining surface tension T of water by capillary method: (A) 0.15%  (B) 1.5% 

Last Answer : The following observations were taken for determining surface tension T of water by capillary method: diameter of capillary ... (C) 2.4% (D) 10%

The water, retained by the soil in capillary pores (micropores), against gravity (-1/3 to - 31 bar) by the force of surface tension

Description : The water, retained by the soil in capillary pores (micropores), against gravity (-1/3 to - 31 bar) by the force of surface tension

Last Answer : Ans.Capillary water