Study the following statements. (i) Levees are constructed parallel to river flow (ii) Spurs are constructed parallel to river flow (iii) Levees are constructed transverse to river flow (iv) Spurs are constructed transverse to river flow The correct answer is (A) (i) and (ii) (B) (i) and (iv) (C) (ii) and (iii) (D) (iii) and (iv)

Study the following statements.
 (i) Levees are constructed parallel to river flow
 (ii) Spurs are constructed parallel to river flow
 (iii) Levees are constructed transverse to river flow
 (iv) Spurs are constructed transverse to river flow
 The correct answer is
(A) (i) and (ii)
(B) (i) and (iv)
(C) (ii) and (iii)
(D) (iii) and (iv)
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The earthen embankments constructed parallel to the river banks at some suitable distance for flood control, are known as (A) Floods walls (B) Dikes (C) Levees (D) Both (b) and (c)

Description : The earthen embankments constructed parallel to the river banks at some suitable distance for flood control, are known as (A) Floods walls (B) Dikes (C) Levees (D) Both (b) and (c)

Last Answer : Answer: Option D

Joint which does not fall under lap joint category (i)Transverse fillet (ii) Parallel fillet (iii) Circular fillet (iv) None

Description : Joint which does not fall under lap joint category (i)Transverse fillet (ii) Parallel fillet (iii) Circular fillet (iv) None

Last Answer : (iv) None

By increasing the rise of lock-gates, (i) The length of the lock gate will increase (ii) Transverse stress due to water pressure on the gate will increase (iii) Compressive force on the gate will increase Of these statements (A) (i) and (ii) are correct (B) (i) and (iii) are correct (C) Only (ii) is correct (D) Only (iii) is correc

Description : By increasing the rise of lock-gates, (i) The length of the lock gate will increase (ii) Transverse stress due to water pressure on the gate will increase (iii) Compressive force on the gate will increase Of ... ) (i) and (iii) are correct (C) Only (ii) is correct (D) Only (iii) is correc

Last Answer : (A) (i) and (ii) are correct

The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) Bottom face perpendicular to the wall The correct answer is (A) Only (ii) is correct (B) (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct

Description : The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) ... (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct

Last Answer : Answer: Option D

Consider the following statements. (i) Fender is the cushion provided on the face of the jetty for ships to come in contact, (ii) Slip is the space of water area between two adjacent piers where ships are berthed, (iii) Pier head is a structure constructed near the tip of break water near the harbour entrance. Of the statements (A) (i) and (ii) are correct (B) (ii) and (iii) are correct (C) (i) and (iii) are correct (D) (i), (ii) and (iii) are correct

Description : Consider the following statements. (i) Fender is the cushion provided on the face of the jetty for ships to come in contact, (ii) Slip is the space of water area between two adjacent piers where ships are berthed, ... correct (C) (i) and (iii) are correct (D) (i), (ii) and (iii) are correct

Last Answer : (D) (i), (ii) and (iii) are correct

Study the following statements. (i) Hydraulic lime is suitable for white washing, (ii) Fat lime is suitable for whitewashing, (iii) Hydraulic lime is suitable for making mortar, (iv) Fat lime is suitable for making mortar.

Description : Study the following statements. (i) Hydraulic lime is suitable for white washing, (ii) Fat lime is suitable for whitewashing, (iii) Hydraulic lime is suitable for making mortar, (iv) Fat lime is suitable for making mortar.

Last Answer : Answer: Option B (B) (ii) and (iii)

River Alaknanda forms confluences (Prayags) in Uttrakhand. Match the codes given in Figure with Table (Prayags) and select the correct answer using the code given below. Figure Table (Pr ayags) D A L A K N A N D A C B A I. Karn Prayag II. Rudra Prayag III. Nand Prayag IV. Vishnu Prayag

Description : River Alaknanda forms confluences (Prayags) in Uttrakhand. Match the codes given in Figure with Table (Prayags) and select the correct answer using the code given below. Figure Table (Pr ayags) D A L A K N A N D A C B A I. Karn Prayag II. Rudra Prayag III. Nand Prayag IV. Vishnu Prayag

Last Answer : (1) A-II, B-I, C-III, D-IV

Transverse fillet welds are under (i) Bending and shear stresses (ii)Compressive and torsion shear stresses (iii)Tensile and compressive stresses (iv)None

Description : Transverse fillet welds are under (i) Bending and shear stresses (ii)Compressive and torsion shear stresses (iii)Tensile and compressive stresses (iv)None

Last Answer : (iv)None

Area under tension in a single transverse fillet lap weld is (i)0.707 tl (ii) 0.807 tl (iii) 400 tl (iv)None

Description : Area under tension in a single transverse fillet lap weld is (i)0.707 tl (ii) 0.807 tl (iii) 400 tl (iv)None

Last Answer : (i)0.707 tl

The transverse section of a plant shows following anatomical features : (i) Large number of scattered vascular bundles surrounded by bundle sheath (ii) Large conspicuous parenchymatous ground tissue (iii)vascular bundles conjoint and closed (iv) phloem parenchyma absent Identify the category of plant and its part. (a) Monocotyledonous stem (b) Monocotyledonous root (c) Dicotyledonous stem (d) Dicotyledonous root

Description : The transverse section of a plant shows following anatomical features : (i) Large number of scattered vascular bundles surrounded by bundle sheath (ii) Large conspicuous parenchymatous ground ... (a) Monocotyledonous stem (b) Monocotyledonous root (c) Dicotyledonous stem (d) Dicotyledonous root

Last Answer : (a) Monocotyledonous stem

Tandem rig test with 450 probe for AT weld detects. (i) Horizontal longitudinal defect in weld. (ii) Vertical oriented defect in AT weld.* (iii) Transverse defect in AT weld. (iv) Defect in flange of AT welds.

Description : Tandem rig test with 450 probe for AT weld detects. (i) Horizontal longitudinal defect in weld. (ii) Vertical oriented defect in AT weld.* (iii) Transverse defect in AT weld. (iv) Defect in flange of AT welds.

Last Answer : (ii) Vertical oriented defect in AT weld.*

If code of a fracture is OFW-422 then it means. (i) AT welding with transverse crack. (ii) Flash butt welding with transverse crack. (iii) At welding with horizontal crack.* (iv) None of the above.

Description : If code of a fracture is OFW-422 then it means. (i) AT welding with transverse crack. (ii) Flash butt welding with transverse crack. (iii) At welding with horizontal crack.* (iv) None of the above.

Last Answer : (iii) At welding with horizontal crack.*

Min. breaking load of 60kg weld during transverse breaking load test is? (i) 110 MT (ii) 115 MT* (iii) 90 MT (iv) 120 MT

Description : Min. breaking load of 60kg weld during transverse breaking load test is? (i) 110 MT (ii) 115 MT* (iii) 90 MT (iv) 120 MT

Last Answer : (ii) 115 MT*

Min. breaking load of 52kg weld during transverse breaking load test is? (i) 90MT* (ii) 100 MT (iii) 110 MT (iv) 120 MT

Description : Min. breaking load of 52kg weld during transverse breaking load test is? (i) 90MT* (ii) 100 MT (iii) 110 MT (iv) 120 MT

Last Answer : (i) 90MT*

Minm. deflection during transverse breaking load test is? (i) 5 mm (ii) 10 mm (iii) 15 mm* (iv) 20 mm

Description : Minm. deflection during transverse breaking load test is? (i) 5 mm (ii) 10 mm (iii) 15 mm* (iv) 20 mm

Last Answer : (iii) 15 mm*

Consider the following statements and select the correct answer from the code given below: i. Rajasthan receives the highest solar radiation in the country. ii. India has the fifth largest installed wind power in the world. iii. The maximum amount of wind power is contributed by Tamil Nadu. iv. The primary source of uranium in India is Jaduguda. Codes: (A) i and ii (B) i, ii and iii (C) ii and iii (D) i and iv

Description : Consider the following statements and select the correct answer from the code given below: i. Rajasthan receives the highest solar radiation in the country. ii. India has the fifth largest installed wind power in the world. iii. The ... (A) i and ii (B) i, ii and iii (C) ii and iii (D) i and iv

Last Answer : Answer: D

Which of the following statements are mutually contradictory ? (i) All flowers are not fragrant. (ii) Most flowers are not fragrant. (iii) None of the flowers is fragrant. (iv) Most flowers are fragrant. Choose the correct answer from the code given below : Code : (A) (i) and (ii) (B) (i) and (iii) (C) (ii) and (iii) (D) (iii) and (iv)

Description : Which of the following statements are mutually contradictory ? (i) All flowers are not fragrant. (ii) Most flowers are not fragrant. (iii) None of the flowers is fragrant. (iv) Most flowers are fragrant. Choose the correct answer ... ii) (B) (i) and (iii) (C) (ii) and (iii) (D) (iii) and (iv)

Last Answer : (D) (iii) and (iv) 

The maximum harbour depth below lowest low water is generally equal to (i) Loaded draft +1.2 m when bottom is rock (ii) Loaded draft +1.8 m when bottom is soft (iii) Loaded draft +1.2 m when bottom is soft (iv) Loaded draft +1.8 m when bottom is rock Of these statements (A) (i) and (ii) are correct (B) (i) and (iii) are correct (C) (ii) and (iv) are correct (D) (iii) and (iv) are correct

Description : The maximum harbour depth below lowest low water is generally equal to (i) Loaded draft +1.2 m when bottom is rock (ii) Loaded draft +1.8 m when bottom is soft (iii) Loaded draft +1.2 m when bottom is ... ) and (iii) are correct (C) (ii) and (iv) are correct (D) (iii) and (iv) are correct

Last Answer : (D) (iii) and (iv) are correct

The part of a derrick crane include (i) Mast (ii) Boom (iii) Bull wheel (iv) Jack Of these statements (A) (i), (ii) and (iv) are correct (B) (ii), (iii) and (iv) are correct (C) (i), (iii) and (iv) are correct (D) (i), (ii) and (iii) are correct

Description : The part of a derrick crane include (i) Mast (ii) Boom (iii) Bull wheel (iv) Jack Of these statements (A) (i), (ii) and (iv) are correct (B) (ii), (iii) and (iv) are correct (C) (i), (iii) and (iv) are correct (D) (i), (ii) and (iii) are correct

Last Answer : (D) (i), (ii) and (iii) are correct

Examine the following statements: (i) Factor of safety for steel should be based on its yield stress, (ii) Factor of safety for steel should be based on its ultimate stress, (iii) Factor of safety for concrete should be based on its yield stress, (iv) Factor of safety for concrete should be based on its ultimate stress. The correct statements are (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv

Description : Examine the following statements: (i) Factor of safety for steel should be based on its yield stress, (ii) Factor of safety for steel should be based on its ultimate stress, (iii) Factor of safety for concrete should be based on ... (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv

Last Answer : Answer: Option B

Which of the following statements is true about a software verification and validation program? I. It strives to ensure that quality is built into software. II. It provides management with insights into the state of a software project. III. It ensures that alpha, beta, and system tests are performed. IV. It is executed in parallel with software development activities. A. I, II&III B.II, III&IV C.I, II&IV D.I, III&IV

Description : Which of the following statements is true about a software verification and validation program? I. It strives to ensure that quality is built into software. II. It provides management with insights into the state ... software development activities. A. I, II&III B.II, III&IV C.I, II&IV D.I, III&IV

Last Answer : C.I, II&IV

The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Description : The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Last Answer : (C) (ii) and (iv)

Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv) Any statically indeterminate structure The correct answer is (A) (i), (ii) and (iii) (B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Description : Muller Breslau's principle for obtaining influence lines is applicable to (i) Trusses (ii) Statically determinate beams and frames (iii) Statically indeterminate structures, the material of which is elastic and follows Hooke's law (iv ... B) (i), (ii) and (iv) (C) (i) and (ii) (D) Only (i)

Last Answer : (A) (i), (ii) and (iii)

For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal (i) Of a stiffness matrix must be positive (ii) Of a stiffness matrix must be negative (iii) Of a flexibility matrix must be positive (iv) Of a flexibility matrix must be negative The correct answer is (A) (i) and (iii) (B) (ii) and (iii) (C) (i) and (iv) (D) (ii) and (iv)

Description : For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal (i) Of a stiffness matrix must be positive (ii) Of a stiffness matrix must be negative (iii) Of ... ) (B) (ii) and (iii) (C) (i) and (iv) (D) (ii) and (iv)

Last Answer : (A) (i) and (iii)

Presence of tail water in a gravity dam (i) Increases the principal stress (ii) Decreases the principal stress (iii) Increases the shear stress (iv) Decreases the shear stress The correct answer isA) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : Presence of tail water in a gravity dam (i) Increases the principal stress (ii) Decreases the principal stress (iii) Increases the shear stress (iv) Decreases the shear stress The correct answer is A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : Answer: Option D

Instantaneous unit hydrograph is a hydrograph of (i) Unit duration (ii) Unit rainfall excess (iii) Infinitely small duration (iv) Infinitely small rainfall excess The correct answer is (A) (i) and (ii) (B) (i) and (iv) C) (ii) and (iii) (D) (iii) and (iv)

Description : Instantaneous unit hydrograph is a hydrograph of (i) Unit duration (ii) Unit rainfall excess (iii) Infinitely small duration (iv) Infinitely small rainfall excess The correct answer is (A) (i) and (ii) (B) (i) and (iv) C) (ii) and (iii) (D) (iii) and (iv)

Last Answer : Answer: Option C

method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Description : method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Last Answer : Answer: Option B

The effect of adding calcium chloride in concrete is (i) To increase shrinkage (ii) To decrease shrinkage (iii) To increase setting time (iv) To decrease setting time The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : The effect of adding calcium chloride in concrete is (i) To increase shrinkage (ii) To decrease shrinkage (iii) To increase setting time (iv) To decrease setting time The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : (B) (i) and (iv)

In a ring beam subjected to uniformly distributed load (i) Shear force at mid span is zero (ii) Shear force at mid span is maximum (iii) Torsion at mid span is zero (iv) Torsion at mid span is maximum The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : In a ring beam subjected to uniformly distributed load (i) Shear force at mid span is zero (ii) Shear force at mid span is maximum (iii) Torsion at mid span is zero (iv) Torsion at mid span is maximum The correct answer ... and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : Option A

Sinking of an intermediate support of a continuous beam (i) Reduces the negative moment at support (ii) Increases the negative moment at support (iii) Reduces the positive moment at center of span (iv) Increases the positive moment at center of span The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : Sinking of an intermediate support of a continuous beam (i) Reduces the negative moment at support (ii) Increases the negative moment at support (iii) Reduces the positive moment at center of span (iv) Increases the positive moment ... (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : Answer: Option B

In counterfort type retaining walls (i) The vertical slab is designed as a continuous slab (ii) The heel slab is designed as a continuous slab (iii) The vertical slab is designed as a cantilever (iv) The heel slab is designed as a cantilever The correct answer is (A) (i) and (ii) (B) (i)and(iv) (C) (ii) and (iii) (D) (iii) and (iv)

Description : In counterfort type retaining walls (i) The vertical slab is designed as a continuous slab (ii) The heel slab is designed as a continuous slab (iii) The vertical slab is designed as a cantilever (iv) The heel slab is designed ... (ii) (B) (i)and(iv) (C) (ii) and (iii) (D) (iii) and (iv)

Last Answer : Answer: Option A

In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided on (i) Bottom face near counterfort (ii) Top face near counterfort (iii) Bottom face near centre of span (iv) Top face near centre of span The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (iv) (D) Both (ii) and (iii)

Description : In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided on (i) Bottom face near counterfort (ii) Top face near counterfort (iii) Bottom face near centre of span (iv) Top ... ) (B) Only (ii) (C) Both (i) and (iv) (D) Both (ii) and (iii)

Last Answer : Answer: Option C

In a counterfort retaining wall, the main reinforcement is provided on the (i) Bottom face in front counterfort (ii) Inclined face in front counterfort (iii) Bottom face in back counterfort (iv) Inclined face in back counterfort The correct answer is (A) (i) and (ii), (B) (ii) and (iii) (C) (i) and (iv) (D) (iii) and (iv)

Description : In a counterfort retaining wall, the main reinforcement is provided on the (i) Bottom face in front counterfort (ii) Inclined face in front counterfort (iii) Bottom face in back counterfort (iv) Inclined face in back counterfort ... (B) (ii) and (iii) (C) (i) and (iv) (D) (iii) and (iv)

Last Answer : Answer: Option C

Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)

Description : Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)

Last Answer : Answer: Option D

In slabs the Maximum horizontal distance between parallel main reinforcement should not exceed i.Three times effective depth ii Five times effective depth iii 300mm iv 450 mm [ A ] i and iii [ B ] i and iv [ C ] ii and iii [ D ] ii and iv

Description : In slabs the Maximum horizontal distance between parallel main reinforcement should not exceed i.Three times effective depth ii Five times effective depth iii 300mm iv 450 mm [ A ] i and iii [ B ] i and iv [ C ] ii and iii [ D ] ii and iv

Last Answer : [ A ] i and iii

Study the given figure below and answer the question that follow important-questions-for-class-12-biology-cbse-fertilisation-pregnancy-and-embryonic-development-t-33-3 (i)Name the stage of human embryo the figure represents. (ii)Identify Ain the figure and mention its function. (iii)Mention the fate of the inner cell mass after implantation in the uterus. (iv)Where are the stem cells located in this embryo? -Biology

Description : Study the given figure below and answer the question that follow important-questions-for-class-12-biology-cbse-fertilisation-pregnancy-and-embryonic-development-t-33-3 (i)Name the stage of human embryo the ... implantation in the uterus. (iv)Where are the stem cells located in this embryo? -Biology

Last Answer : (i)The stage is blastocyst. (ii) A—Trophoblast. It helps in attachment to endometrium during implantation and provides nourishment to developing embryo. (iii) Inner cell mass acts as precursor to embryo ... into ectoderm and endoderm. (iv) Stem cells are located in inner cell mass of embryo.

The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

You find a herbaceous flowering plant growing in your school garden having leaves with parallel venation. Choose the correct additional features the given plant would be possessing. (I) It has no secondary vascular tissues. (II) Its flower possesses three sepals. (Ill) It possesses tap root. (IV) Its embryo has 2 cotyledons. (1) (I) and (II) (2) (I) and (III) (3) (II) and (IV) (4) (III) and (IV)

Description : You find a herbaceous flowering plant growing in your school garden having leaves with parallel venation. Choose the correct additional features the given plant would be possessing. (I) It has no secondary vascular tissues. (II) Its flower ... (2) (I) and (III) (3) (II) and (IV) (4) (III) and (IV)

Last Answer : 1) (I) and (II)

Interception losses are due to (i) Evaporation (ii) Transpiration (iii) Stream flow The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Description : Interception losses are due to (i) Evaporation (ii) Transpiration (iii) Stream flow The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Last Answer : Answer: Option A

Levees and flood walls, (A) Are designed to carry unbalanced water load (B) Are designed with adequate dimensions (C) Are means of controlling floods (D) Are never provided free-boards

Description : Levees and flood walls, (A) Are designed to carry unbalanced water load (B) Are designed with adequate dimensions (C) Are means of controlling floods (D) Are never provided free-boards

Last Answer : Answer: Option D

The greatest erosive power of a river is associated with – (1) gorges (2) meanders (3) inter-locking spurs (4) V-shaped valley

Description : The greatest erosive power of a river is associated with – (1) gorges (2) meanders (3) inter-locking spurs (4) V-shaped valley

Last Answer : (2) meanders Explanation: Erosive power of a stream is proportional to the square of the velocity. Thus, when discharge increases, the depth increases and the velocity increases, resulting in dramatic ... on the outer bank erodes a deeper channel. The result of all these actions is a meander

The greatest erosive power of a river is associated with (1) gorges (2) meanders (3) inter-locking spurs (4) V-shaped valley

Description : The greatest erosive power of a river is associated with (1) gorges (2) meanders (3) inter-locking spurs (4) V-shaped valley

Last Answer : meanders

Pick up the correct statement from the following: (A) The direction of the littoral drift depends upon the direction of the wave with respect to the coastline (B) The direction of a river opening to the sea determines the direction of no littoral drift (C) Harbour in the path of littoral drift is not constructed to avoid a build up of sand on one side and erosion on the other (D) all of the above

Description : Pick up the correct statement from the following: (A) The direction of the littoral drift depends upon the direction of the wave with respect to the coastline (B) The direction of a river opening to the sea ... avoid a build up of sand on one side and erosion on the other (D) all of the above

Last Answer : (D) all of the above