The heat released by cooling one mole of copper from 400 K to room temperature (300 K) is (assume : Cp of copper is 23 J K-1mole-1) (A) 2300 J (B) 4600 J (C) 230 J (D) 2.3 × 106 J

The heat released by cooling one mole of copper from 400 K to room temperature (300 K) is (assume : Cp of copper is 23 J K-1mole-1) (A) 2300 J
(B) 4600 J
(C) 230 J
(D) 2.3 × 106 J
by

1 Answer

Answer :

A) 2300 J
by

Related questions

Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into heating the roof. The specific heat of concrete is about 900 J/kg, and the density is about 2,300 kg/m3 .  a. 7.9 °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Last Answer : 7.9 °C

A perfect gas has a value of R= 319.2 J/ kf.K and k= 1.26. If 120 kJ are added to 2.27 kf\g of this gas at constant pressure when the initial temp is 32.2°C? Find T2.  a. 339.4 K  b. 449.4 K  c. 559.4K  d. 669.4K formula: cp = kR/ k-1 Q= mcp(T2-T1)

Description : A perfect gas has a value of R= 319.2 J/ kf.K and k= 1.26. If 120 kJ are added to 2.27 kf\g of this gas at constant pressure when the initial temp is 32.2°C? Find T2.  a. 339.4 K  b. 449.4 K  c. 559.4K  d. 669.4K formula: cp = kR/ k-1 Q= mcp(T2-T1)

Last Answer : 339.4 K

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Description : A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Last Answer : 130.08 {(10atm)(10)(32)/(0.0821) (300K)}

For the given reaction , `A(g) rarr 2B(g) , Delta_(r)H= 30 kJ//"mole" Delta_(r)S = 150 J//mol` at `300 K` If `C_(P,A) = 20 J//K mol` and `C_(P,B) = 20

Description : For the given reaction , `A(g) rarr 2B(g) , Delta_(r)H= 30 kJ//"mole" Delta_(r)S = 150 J//mol` at `300 K` If `C_(P,A) = 20 J//K mol` and `C_(P,B) = 20

Last Answer : For the given reaction , `A(g) rarr 2B(g) , Delta_(r)H= 30 kJ//"mole" Delta_(r)S = 150 J//mol` at ... G` is negative D. At `T = 200, Delta G` is zero

1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Description : 1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Last Answer : (C) 274 K

A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2 , the depth of the joist, is (A) 200 mm (B) 250 mm (C) 300 mm (D) 400 mm

Description : A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so  that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the  value of E = 0.2 ... joist, is  (A) 200 mm  (B) 250 mm  (C) 300 mm  (D) 400 mm 

Last Answer : (D) 400 mm 

A high temperature waste heat recovery unit consists of recovering waste heat at temperaturesgreater than _______. a) 200 °C b) 500 °C c) 300 °C d) 400 °C

Description : A high temperature waste heat recovery unit consists of recovering waste heat at temperaturesgreater than _______. a) 200 °C b) 500 °C c) 300 °C d) 400 °C

Last Answer : 400 °C

For the irreversible reaction, Ca+ 2C = Ca C2, Δ H°298 = - 60000 J . mole-1. If a system initially containing 2 moles of calcium, 3 moles of carbon and 1 mole of calcium carbide is allowed to react to completion, the heat evolved at 298 K will be (A) 30,000 J (B) 60,000 J (C) 90,000 J (D) 2,40,000 J

Description : For the irreversible reaction, Ca+ 2C = Ca C2, Δ H°298 = - 60000 J . mole-1. If a system initially containing 2 moles of calcium, 3 moles of carbon and 1 mole of calcium carbide is allowed to react to completion, the heat evolved ... will be (A) 30,000 J (B) 60,000 J (C) 90,000 J (D) 2,40,000 J

Last Answer : (C) 90,000 J

Find the potential between two points p(1,-1,0) and q(2,1,3) with E = 40xy i + 20x 2 j + 2 k a) 104 b) 105 c) 106 d) 107

Description : Find the potential between two points p(1,-1,0) and q(2,1,3) with E = 40xy i + 20x 2 j + 2 k a) 104 b) 105 c) 106 d) 107

Last Answer : c) 106

The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Description : The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Last Answer : (B) 400 - 700

Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat of the substance): 0.20 kCal/kg oC DT (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Last Answer : 21600

The heat supplied to the gaS at constant volume is (where m = Mass of gas, cv = Specific heat at constant volume, cp = Specific heat at constant pressure, T2 – T1 = Rise in temperature, and R = Gas constant)  A. mR(T2 – T1)  B. mcv(T2 – T1)  C. mcp(T2 – T1)  D. mcp(T2 + T1)

Description : The heat supplied to the gaS at constant volume is (where m = Mass of gas, cv = Specific heat at constant volume, cp = Specific heat at constant pressure, T2 – T1 = Rise in temperature, and R = Gas constant)  A. mR(T2 – T1)  B. mcv(T2 – T1)  C. mcp(T2 – T1)  D. mcp(T2 + T1)

Last Answer : Answer: B

The gas constant is equal to  a. Cp – Cv  b. Cp + Cv  c. Cp – Cv + k  d. None of the above

Description : The gas constant is equal to  a. Cp – Cv  b. Cp + Cv  c. Cp – Cv + k  d. None of the above

Last Answer : Cp – Cv

A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is the partial pressure of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Description : A 0.064 kg of octane vapor (MW = 114) is mixed with0.91 kg of air (MW = 29.0) in the manifold of an Engine. The total pressure in the manifold is 86.1 kPa, and a temperature is 290 K. assume octane behaves ideally. What is ... of the air in the mixture in KPa?  a. 46.8  b. 48.6  c. 84.6  d. 64.8

Last Answer : 84.6

The expression for entropy change, ΔS = n Cp. ln (T2/T1), is valid for the __________ of a substance. (A) Simultaneous pressure & temperature change (B) Heating (C) Cooling (D) Both (B) and (C)

Description : The expression for entropy change, ΔS = n Cp. ln (T2/T1), is valid for the __________ of a substance. (A) Simultaneous pressure & temperature change (B) Heating (C) Cooling (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Assume a frequency of 4 MHz, determine the phase shift offered by the line in the above problem. A. 108.5˚ B. 106.5˚ C. 115.5˚ D. 166.5˚

Description : Assume a frequency of 4 MHz, determine the phase shift offered by the line in the above problem. A. 108.5˚ B. 106.5˚ C. 115.5˚ D. 166.5˚

Last Answer : D. 166.5˚

Assume that K goes HIGH and J goes LOW; when will the FF reset?

Description : Assume that K goes HIGH and J goes LOW; when will the FF reset?

Last Answer : When the clock pulse goes LOW.

Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Description : Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Last Answer : A) 300 × (32/7)

With direct water cooling it is possible to have ratings of about (a) 200 MW (b) 300 MW (c) 400 MW (d) 600 MW

Description : With direct water cooling it is possible to have ratings of about (a) 200 MW (b) 300 MW (c) 400 MW (d) 600 MW

Last Answer : (d) 600 MW

The value of specific heat at constant pressure (cp) is __________ that of at constant volume (cv).  A. less than  B. equal to  C. more than

Description : The value of specific heat at constant pressure (cp) is __________ that of at constant volume (cv).  A. less than  B. equal to  C. more than

Last Answer : Answer: C

The ratio of specific heat at constant pressure (Cp) and specific heat at constant volume (cv) is  A. equal to one  B. less than one  C. greater than one  D. none of these

Description : The ratio of specific heat at constant pressure (Cp) and specific heat at constant volume (cv) is  A. equal to one  B. less than one  C. greater than one  D. none of these

Last Answer : Answer: C

There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and there are also added 105.5 kJ of heat. Determine t2. (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Last Answer : 999 K

The value of Cp & Cv respectively for monatomic gases in Kcal/kg Mole.°K are (A) 5 & 3 (B) 3.987 & 1.987 (C) 1.987 & 0.66 (D) 0.66 & 1.987

Description : The value of Cp & Cv respectively for monatomic gases in Kcal/kg Mole.°K are (A) 5 & 3 (B) 3.987 & 1.987 (C) 1.987 & 0.66 (D) 0.66 & 1.987

Last Answer : A) 5 & 3

Calculate the enthalpy of vaporisation per mole for ethanol. Given `DeltaS = 109.8 J K^(-1) mol^(-1)` and boiling point of ethanol is `78.5^(@)`.

Description : Calculate the enthalpy of vaporisation per mole for ethanol. Given `DeltaS = 109.8 J K^(-1) mol^(-1)` and boiling point of ethanol is `78.5^(@)`.

Last Answer : Calculate the enthalpy of vaporisation per mole for ethanol. Given `DeltaS = 109.8 J K^(-1) mol^(-1)` ... KJ mol^(-1)` D. Some more data is required

Heat transfer co-efficient (h) for a fluid flowing inside a clean pipe is given by h = 0.023 (K/D) (DVρ/µ) 0.8 (CP .µ/k) 0.4 . This is valid for the value of NRe equal to (A) < 2100 (B) 2100-4000 (C) > 4000 (D) > 10000

Description : Heat transfer co-efficient (h) for a fluid flowing inside a clean pipe is given by h = 0.023 (K/D) (DVρ/µ) 0.8 (CP .µ/k) 0.4 . This is valid for the value of NRe equal to (A) < 2100 (B) 2100-4000 (C) > 4000 (D) > 10000

Last Answer : (D) > 10000

For the reversible isothermal expansion of one mole of an ideal gas at 300 K, from a volume of `10 dm^(3)` to `20 dm^(3), Delta H` is -

Description : For the reversible isothermal expansion of one mole of an ideal gas at 300 K, from a volume of `10 dm^(3)` to `20 dm^(3), Delta H` is -

Last Answer : For the reversible isothermal expansion of one mole of an ideal gas at 300 K, from a volume of `10 dm^(3)` to ` ... . `-1.73 KJ` C. `3.46 KJ` D. Zero

Let the page fault service time be 10 millisecond(ms) in a computer with average memory access time being 20 nanosecond(ns). If one page fault is generated for every 106 memory accesses, what is the effective access time for memory? (A) 21 ns (B) 23 ns (C) 30 ns (D) 35 ns

Description : Let the page fault service time be 10 millisecond(ms) in a computer with average memory access time being 20 nanosecond(ns). If one page fault is generated for every 106 memory accesses, what is the effective access time for memory? (A) 21 ns (B) 23 ns (C) 30 ns (D) 35 ns

Last Answer : (C) 30 ns

India is unique in its characteristics,where over different crops are cultivated in region a) 400. c) 350 b)250 d) 300

Description : India is unique in its characteristics,where over different crops are cultivated in region a) 400. c) 350 b)250 d) 300

Last Answer : 250 

Motorized knapsack sprayer blade rotation at about ……. To rev/min. a. 200 to 300. c. 100 to 120 b. 120 to 400. d. 150 to 300

Description : Motorized knapsack sprayer blade rotation at about ……. To rev/min. a. 200 to 300. c. 100 to 120 b. 120 to 400. d. 150 to 300

Last Answer : 100 to 120

Indian penal code 1860 Consists i) 584 Sections, 5 Schedules & 5 chapters j) 511 Sections, 23 chapter k) 156 Sections, 3 Schedules l) None of these

Description : Indian penal code 1860 Consists i) 584 Sections, 5 Schedules & 5 chapters j) 511 Sections, 23 chapter k) 156 Sections, 3 Schedules  l) None of these

Last Answer : j) 511 Sections, 23 chapter

Given E = 40xyi + 20x 2 j + 2k. Calculate the potential between two points (1,-1,0) and (2,1,3). a) 105 b) 106 c) 107 d) 108

Description : Given E = 40xyi + 20x 2 j + 2k. Calculate the potential between two points (1,-1,0) and (2,1,3). a) 105 b) 106 c) 107 d) 108

Last Answer : b) 106

If a body (coated black) at `600 K` surrounded by atmosphere at `300 K` has cooling rate `r_(0)`, the same body at `900 K`, surrounded by the same atm

Description : If a body (coated black) at `600 K` surrounded by atmosphere at `300 K` has cooling rate `r_(0)`, the same body at `900 K`, surrounded by the same atm

Last Answer : If a body (coated black) at `600 K` surrounded by atmosphere at `300 K` has cooling rate `r_(0)`, the same body ... (0)//16` C. `16r_(0)` D. `4r_(0)`

A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Description : A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Last Answer : b. 11.286 J

The two specific heats of gases are related by : (1) Cp + Cv = RJ (2) Cp –Cv = R/J (3) Cp – Cv = RJ (4) Cp /Cv = R

Description : The two specific heats of gases are related by : (1) Cp + Cv = RJ (2) Cp –Cv = R/J (3) Cp – Cv = RJ (4) Cp /Cv = R

Last Answer :  Cp –Cv = R/J

Heat recovery equipment will be most effective when the temperature of flue gas is: a) 250oC b) 200 oC c)400 oC d) 280 oC

Description : Heat recovery equipment will be most effective when the temperature of flue gas is: a) 250oC b) 200 oC c)400 oC d) 280 oC

Last Answer : 400 oC

A manufacturer claims to have a heat engine capable of developing 20 h.p. by receiving heat input of 400 kcal/mt and working between the temperature limits of 227° C and 27° C. His claim is  (a) justified  (b) not possible  (c) may be possible with lot of sophistications  (d) cost will be very high  (e) theroretically possible.

Description : A manufacturer claims to have a heat engine capable of developing 20 h.p. by receiving heat input of 400 kcal/mt and working between the temperature limits of 227° C and 27° C. His claim is  ( ... be possible with lot of sophistications  (d) cost will be very high  (e) theroretically possible.

Last Answer : Answer : b

Which one of the following is true to estimate the range of cooling tower? a) Range = cooling water inlet temperature – wet bulb temperature b) Range = cooling water outlet temperature – wet bulb temperature c) Range = heat load in kcal per hour / water circulation in lines per hour d) None of the above

Description : Which one of the following is true to estimate the range of cooling tower? a) Range = cooling water inlet temperature - wet bulb temperature b) Range = cooling water outlet temperature - wet bulb temperature ... = heat load in kcal per hour / water circulation in lines per hour d) None of the above

Last Answer : Range = heat load in kcal per hour / water circulation in lines per hour

Which of the following faction affect the cooling tower performance? • The range • Heat load • Wet bulb temperature • All of the above

Description : Which of the following faction affect the cooling tower performance? • The range • Heat load • Wet bulb temperature • All of the above

Last Answer : All of the above

A ______ is a specialized heat exchanger in which air and water are brought into direct contact with each otherin order to reduce the water's temperature. a. Cooling tower b. Heating tower c. Both d. All are wrong

Description : A ______ is a specialized heat exchanger in which air and water are brought into direct contact with each otherin order to reduce the water's temperature. a. Cooling tower b. Heating tower c. Both d. All are wrong

Last Answer : cooling tower

For a body cooling in a draft, the rate of heat loss is proportional to the difference in temperature between the body and its surroundings.  a. Nemst Effect  b. Caloric Theory  c. Joule’s Law  d. Newton’s Law of Cooling

Description : For a body cooling in a draft, the rate of heat loss is proportional to the difference in temperature between the body and its surroundings.  a. Nemst Effect  b. Caloric Theory  c. Joule’s Law  d. Newton’s Law of Cooling

Last Answer : Newton’s Law of Cooling

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

What is the hydraulic oil capacity for a 4600 ford tractor?

Description : What is the hydraulic oil capacity for a 4600 ford tractor?

Last Answer : Need answer

. An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Description : . An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Last Answer : (A) 4000

A ultra-supercritical steam generator operates at pressures above the critical pressure- a. 2400 psi b. 1500 psi c. 3200 psi d. 4600 psi

Description : A ultra-supercritical steam generator operates at pressures above the critical pressure- a. 2400 psi b. 1500 psi c. 3200 psi d. 4600 psi

Last Answer : c. 3200 psi

A sum of 12600 is to be distributed between A, B and C. For every rupee A gets, B gets 80p and for every rupee B gets, C get 90 paise. Find the amount get by C. A) 3200 B) 3600 C) 4200 D) 4600 E) None of these

Description : A sum of 12600 is to be distributed between A, B and C. For every rupee A gets, B gets 80p and for every rupee B gets, C get 90 paise. Find the amount get by C. A) 3200 B) 3600 C) 4200 D) 4600 E) None of these

Last Answer : Answer: B Ratio of money between A and B – 100:80 and that of B and C – 100:90 so the ratio between A : B :C – 100:80:72 so 252x = 12600, x = 50. So C get = 50*72 = 3600

The voltage of the single phase supply to residential consumers is (a) 110 V (b) 210 V (c) 230 V (d) 400 V

Description : The voltage of the single phase supply to residential consumers is (a) 110 V (b) 210 V (c) 230 V (d) 400 V

Last Answer : (c) 230 V

The voltage of the single phase supply to residential consumers is (a) 110 V (b) 210 V (c) 230 V (d) 400 V

Description : The voltage of the single phase supply to residential consumers is (a) 110 V (b) 210 V (c) 230 V (d) 400 V

Last Answer : (c) 230 V