A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the
intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under
the same intensity of loading is
(A) 15 mm
(B) 30 mm
(C) 50 mm
(D) 167 mm
by

1 Answer

Answer :

(C) 50 mm
by

Related questions

A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Description : A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of ... (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Last Answer : Answer: Option B

In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Description : In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Last Answer : (B) Between 300 mm and 750 mm

For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Description : For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Last Answer : Answer: Option D

Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the footing. 3. Size effects in plate load tests are more important in case of cohesionless soils. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the ... , 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (d) 1 & 3 only

A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the value of E = 0.2 × 106 N/mm2 , the depth of the joist, is (A) 200 mm (B) 250 mm (C) 300 mm (D) 400 mm

Description : A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so  that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the  value of E = 0.2 ... joist, is  (A) 200 mm  (B) 250 mm  (C) 300 mm  (D) 400 mm 

Last Answer : (D) 400 mm 

Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a soil depends upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Description : Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a ... upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Last Answer : Answer: Option A

Two footings, one circular and the other square, are founded on the surface of a purely cohesionless soil. The diameter of the circular footing is the same as that of the side of the square footing. The ratio between their ultimate bearing capacities will be : (a) 1.0 (b) 1.3 (c) 1.33 (d) 0.75

Description : Two footings, one circular and the other square, are founded on the surface of a purely cohesionless soil. The diameter of the circular footing is the same as that of the side of the square footing. The ratio between their ultimate bearing capacities will be : (a) 1.0 (b) 1.3 (c) 1.33 (d) 0.75

Last Answer : (d) 0.75

Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Description : Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Last Answer : Answer: Option D

Contact pressure beneath a rigid footing resting on cohesive soil is (A) Less at edges compared to middle (B) More at edges compared to middle (C) Uniform throughout (D) None of the above

Description : Contact pressure beneath a rigid footing resting on cohesive soil is (A) Less at edges compared to middle (B) More at edges compared to middle (C) Uniform throughout (D) None of the above

Last Answer : Answer: Option B

During the first stage of triaxial test when the cell pressure is increased from 0.10 N/mm² to 0.26 N/mm², the pore water pressure increases from 0.07 N/mm² to 0.15 N/mm². Skempton's pore B (A) 0.5 (B) -0.5 (C) 2.0 (D) -2.0

Description : During the first stage of triaxial test when the cell pressure is increased from 0.10 N/mm² to 0.26 N/mm², the pore water pressure increases from 0.07 N/mm² to 0.15 N/mm². Skempton's pore B (A) 0.5 (B) -0.5 (C) 2.0 (D) -2.0

Last Answer : (A) 0.5

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net ... load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow trenches (C) Shallow foundations can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Description : Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow ... can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Last Answer : Answer: Option D

A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively (A) 0.5 N/mm² and 30° (B) 0.05 N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B

Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Description : Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Last Answer : (b) 15, 25, 40 and 75

To minimise the effect of differential settlement, the area of a footing should be designed for (A) Dead load only (B) Dead load + live load (C) Dead load + fraction of live load (D) Live load + fraction of dead load

Description : To minimise the effect of differential settlement, the area of a footing should be designed for (A) Dead load only (B) Dead load + live load (C) Dead load + fraction of live load (D) Live load + fraction of dead load

Last Answer : Answer: Option C

In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 m

Description : In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 mm

Last Answer : Answer: Option B

If water table is encountered in the standard pit while conducting plate load test (a) The load test should be abandoned (b) The pit is considered unsafe (c) Test should be conducted with complete dewatering continuously throughout the test duration (d) The bearing capacity of soil cannot be determined in this condition

Description : If water table is encountered in the standard pit while conducting plate load test (a) The load test should be abandoned (b) The pit is considered unsafe (c) Test should be conducted ... continuously throughout the test duration (d) The bearing capacity of soil cannot be determined in this condition

Last Answer : (c) Test should be conducted with complete dewatering continuously throughout the test duration

If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Description : If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A combined footing may be either rectangular or trapezoidal in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Description : Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A ... in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Last Answer : Answer: Option D

The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Description : The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Last Answer : Answer: Option D

Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Description : Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Last Answer : Answer: Option D

The maximum permissible differential settlement, in case of foundations in clayey soil, is usually limited to (A) 10 mm (B) 20 mm (C) 30 mm (D) 40 mm

Description : The maximum permissible differential settlement, in case of foundations in clayey soil, is usually limited to (A) 10 mm (B) 20 mm (C) 30 mm (D) 40 mm

Last Answer : Answer: Option D

In reinforced concrete footing on soil, the minimum thickness at edge should not be less than (A) 100 mm (B) 150 mm (C) 200 mm (D) 250 mm

Description : In reinforced concrete footing on soil, the minimum thickness at edge should not be less than (A) 100 mm (B) 150 mm (C) 200 mm (D) 250 mm

Last Answer : Answer: Option B

If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Description : If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Last Answer : (B) 45°

The intensity of vertical pressure at a depth directly below the point load on its axis of loading is: (A) 0.4775 Q/Z (B) 0.4775 Q/Z² (C) 0.4775 Q/Z3 (D) 0.4775 Q Z

Description : The intensity of vertical pressure at a depth directly below the point load on its axis of loading is: (A) 0.4775 Q/Z (B) 0.4775 Q/Z² (C) 0.4775 Q/Z3 (D) 0.4775 Q Z

Last Answer : (B) 0.4775 Q/Z²

Explain plate load test with neat sketch to determine bearing capacity of soil.

Description : Explain plate load test with neat sketch to determine bearing capacity of soil.

Last Answer : Procedure of plate load test: 1. Excavate a pit of depth equal to 5 times to that of breath of proposed footing. 2. Keep the suitable bearing plate of specified size (30, 45, 60, 75cm square in plan) ... as shown in figure below to find out load before failure as bearing capacity of soil.

Minimum thickness of load bearing RCC wall should be (A) 50 mm (B) 100 mm (C) 150 mm (D) 200 mm

Description : Minimum thickness of load bearing RCC wall should be (A) 50 mm (B) 100 mm (C) 150 mm (D) 200 mm

Last Answer : (B) 100 mm

The coefficient of compressibility of soil, is the ratio of (A) Stress to strain (B) Strain to stress (C) Stress to settlement (D) Rate of loading to that of settlement

Description : The coefficient of compressibility of soil, is the ratio of (A) Stress to strain (B) Strain to stress (C) Stress to settlement (D) Rate of loading to that of settlement

Last Answer : Answer: Option B

NEFT is an electronic fund transfer system that operates on a _________ basis which settles transactions in batches. A. Domain Net Settlement (DNS) B. Defined Net Settlement (DNS) C. Declared Net Settlement (DNS) D. Deferred Net Settlement (DNS)

Description : NEFT is an electronic fund transfer system that operates on a _________ basis which settles transactions in batches. A. Domain Net Settlement (DNS) B. Defined Net Settlement (DNS) C. Declared Net Settlement (DNS) D. Deferred Net Settlement (DNS)

Last Answer : D. Deferred Net Settlement (DNS) Explanation: NEFT is an electronic fund transfer system that operates on a Deferred Net Settlement (DNS) basis which settles transactions in batches. In DNS, the ... till the particular cut-off time. These transactions are netted (payable and receivables) in NEFT.

In a cross joint tensile test the following observations were made: Specimen width 20mm, Material thickness 20mm, Max Load: 180kN, Break position: Parent Plate. What is the UTS? a) 45 kN/mm b) 450 N/mm2c) 39 kN/mm2d) 39 N/mm2

Description : In a cross joint tensile test the following observations were made: Specimen width 20mm, Material thickness 20mm, Max Load: 180kN, Break position: Parent Plate. What is the UTS? a) 45 kN/mm b) 450 N/mm2c) 39 kN/mm2d) 39 N/mm2

Last Answer : b) 450 N/mm2

Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Description : Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4

Last Answer : a) 7

If is the net upward pressure on a square footing of side for a square column of side , the maximum bending moment is given by (A) B.M = pb (c - a)/4 (B) B.M = pb (b - a)²/4 (C) B.M = pb (b - a)²/8 (D) B.M = pb (b + a)/8

Description : If is the net upward pressure on a square footing of side for a square column of side , the maximum bending moment is given by (A) B.M = pb (c - a)/4 (B) B.M = pb (b - a)²/4 (C) B.M = pb (b - a)²/8 (D) B.M = pb (b + a)/8

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) The bearing capacity of a pile is defined as the load which can be sustained by the pile without producing excessive settlement (B) The safe bearing capacity of a pile is obtained by dividing the ultimate bearing capacity with a suitable factor of safety (C) The factor of safety for piles is taken as 6 (D) All the above

Description : Pick up the correct statement from the following: (A) The bearing capacity of a pile is defined as the load which can be sustained by the pile without producing excessive settlement (B) The safe bearing capacity ... of safety (C) The factor of safety for piles is taken as 6 (D) All the above

Last Answer : Answer: Option D

n Girder and Slab Bridges Danger level should be marked below bottom of girders/slabs for water way is > 12.20 < 30.5 m a) 300 mm b) 600 mm* c) 500 mm d) 450 mm

Description : n Girder and Slab Bridges Danger level should be marked below bottom of girders/slabs for water way is > 12.20 < 30.5 m a) 300 mm b) 600 mm* c) 500 mm d) 450 mm

Last Answer : b) 600 mm*

Draw neat sketches of any three shallow foundations and suggest suitability of them for different loading and soil conditions.

Description : Draw neat sketches of any three shallow foundations and suggest suitability of them for different loading and soil conditions.

Last Answer : Types of shallow foundation with their suitability: 1. Wall Footing: Wall footings are used for individual columns, walls and bridge piers where the bearing soil layer is within 3m (10 feet) from the ground surface. Soil ... bearing capacity of soil.    9. Slab Base:   10.Gusseted base:  

Explain plate load test and draw a load settlement curve

Description : Explain plate load test and draw a load settlement curve

Last Answer : i) Plate load test is a filed test to determine the ultimate bearing capacity f soil and probable settlement under given loading. ii) The test essentially consist in loading a rigid plate, called bearing ... /hr xi) the results of test are plotted between settlement and load intensity

The permissible diagonal tensile stress in reinforced brick work is (A) About 0.1 N/mm² (B) Zero (C) 0.3 N/mm² to 0.7 N/mm² (D) About 1.0 N/m2

Description : The permissible diagonal tensile stress in reinforced brick work is (A) About 0.1 N/mm² (B) Zero (C) 0.3 N/mm² to 0.7 N/mm² (D) About 1.0 N/m2

Last Answer : Answer: Option A

If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly reinforced rectangular balanced section will be (A) 0.35 d (B) 0.40 d (C) 0.45 d (D) Dependent on grade of concrete also

Description : If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly reinforced rectangular balanced section will be (A) 0.35 d (B) 0.40 d (C) 0.45 d (D) Dependent on grade of concrete also

Last Answer : Answer: Option B

Crushing strength of a first class brick should not be less than (A) 3.5 N/mm² (B) 7.0 N/mm² (C) 10.5 N/mm² (D) 14.0 N/mm²

Description : Crushing strength of a first class brick should not be less than (A) 3.5 N/mm² (B) 7.0 N/mm² (C) 10.5 N/mm² (D) 14.0 N/mm²

Last Answer : Answer: Option C

Draw the experimental setup of plate load test using gravity loading.

Description : Draw the experimental setup of plate load test using gravity loading.

Last Answer : Plate Load Test :- 1.Bearing Plate: - It is either circular or square made up mild steel of not less than 25mm thickness and varying in size from 300 to 750mm with grooved bottom. For clayey soil ... settlement curve is plotted where load intensity is on X axis and Settlement is on Y axis.

Pick up the correct statement from the following: (A) Isolated footing is provided under column to transfer the load safely to soil bed (B) Column footings may have steps or projections in the concrete base (C) Heavily loaded column base must be provided steel reinforcement in both directions (D) All the above

Description : Pick up the correct statement from the following: (A) Isolated footing is provided under column to transfer the load safely to soil bed (B) Column footings may have steps or projections in the ... ) Heavily loaded column base must be provided steel reinforcement in both directions (D) All the above

Last Answer : Option D

A standard steel tape of length 30 m and cross-section 15 × 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 × 106 kg/cm2 , the correction to be applied is (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Description : A standard steel tape of length 30 m and cross-section 15 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of ... (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Last Answer : (A) - 0.000909 m

Allowable bearing pressure for a foundation depends upon (A) Allowable settlement only (B) Ultimate bearing capacity of soil only (C) Both allowable settlement and ultimate bearing capacity (D) None of above

Description : Allowable bearing pressure for a foundation depends upon (A) Allowable settlement only (B) Ultimate bearing capacity of soil only (C) Both allowable settlement and ultimate bearing capacity (D) None of above

Last Answer : (C) Both allowable settlement and ultimate bearing capacity

In soils possessing low bearing capacity, the type of foundation generally provided, is (A) Column footing (B) Grillage footing (C) Raft footing (D) All the above

Description : In soils possessing low bearing capacity, the type of foundation generally provided, is (A) Column footing (B) Grillage footing (C) Raft footing (D) All the above

Last Answer : Option D

Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm². a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm

Description : Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm². a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm

Last Answer : b) 41.2mm

Pick up the correct statement from the following: (A) When water table is above the base of a footing, the dry weight m should be used for soil below water table (B) When water table is located somewhat below the base of a footing, the elastic wedge is partly of moist soil and partly of submerged soil, and a suitable reduction factor is used (C) When water table is just at the base of the footing, no reduction factor is used (D) None of these

Description : Pick up the correct statement from the following: (A) When water table is above the base of a footing, the dry weight m should be used for soil below water table (B) When water table is located ... water table is just at the base of the footing, no reduction factor is used (D) None of these

Last Answer : (B) When water table is located somewhat below the base of a footing, the elastic wedge is partly of moist soil and partly of submerged soil, and a suitable reduction factor is used

Based on punching shear consideration, the overall depth of a combined footing under a column A, is (A) (Area of the column A × Safe punching stress)/Load on column A (B) (Perimeter of column A × Safe punching stress)/(Load on column A + Upward pressure × Area of the column) (C) (Perimeter of column A × Safe punching stress)/(Load on column A × Upward pressure × Area of the column) (D) None of these

Description : Based on punching shear consideration, the overall depth of a combined footing under a column A, is (A) (Area of the column A Safe punching stress)/Load on column A (B) (Perimeter of column A ... punching stress)/(Load on column A Upward pressure Area of the column) (D) None of these

Last Answer : Answer: Option B

The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Description : The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Last Answer : : Option B

The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete is (a) Uniform compression throughout (b) Zero at one end and compression at the other end (c) Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Description : The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete ... Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Last Answer : (b) Zero at one end and compression at the other end