With the help of necessary sketch, explain in brief the working of brushless DC motor.

With the help of necessary sketch, explain in brief the working of brushless DC motor. 
by

1 Answer

Answer :

Constructional Diagram of Brushless DC Motor:

image

Working of brushless DC motor: The brushless DC motor is the combination of a permanent excited synchronous motor and a frequency inverter. The inverter has to replace the commutator of a conventional DC motor. Fig. 2 and Fig. 3 show how a brushless DC motor can be derived from a mechanically commutated DC motor with three armature slots. Its armature winding corresponds to a three phase winding in delta connection. The commutator acts like a three phase frequency converter. Stator (excitation) and rotor (armature) change places. The construction of brushless DC motor is similar to that of permanent magnet synchronous motor. The commutation of a brushless DC motor depends on the position of the rotor. The angle between the magneto-motive forces of stator and rotor is fixed to 900 (el.), so the motor produces maximum torque and needs low reactive current - it might be useful to advance commutation by few degrees to compensate the effects of the stray inductance and minimize reactive current. Speed can only be controlled by the the motor voltage. The motor behaves like a DC motor. Unlike the synchronous motor there are no problems with instability at any speed. Because of the PWM frequency inverter, variation of the motor voltage can be achieved easily by changing the duty cycle of the pulse width modulation. Suitable PWM techniques allow regenerative breaking, which increases dynamic and efficiency of the drive. 

by

Related questions

State any two applications of brushless DC motor.

Description : State any two applications of brushless DC motor. 

Last Answer : 1) Synthetic fibre drawing works.  2) Turn table drives in record players.  3) Spindle drives in hard disk circuits.  4) Computer peripheral equipments as plotters etc. 5) Gyroscope motors.  6) Biomedical machines as heart pumps. 

What is brushless DC motor?

Description : What is brushless DC motor?

Last Answer : An inverter fed trapezoidal permanent magnet AC motor drive operating in self-controlled mode is called brushless dc motor.

What is Brushless DC Motor (BLDC) ?

Description : What is Brushless DC Motor (BLDC) ?

Last Answer : Brushless DC Motor (BLDC)  The motor is made up of rotor and stator . In BLDC motor the rotor is a ferromagnetic material (permanent magnet). The rotor may be  ... winding gives low torque at low speed and start winding gives high torque at low speed.

Advantages and Disadvantages of Permanent Magnet Brushless DC (PMBLDC) Motor

Description : Advantages and Disadvantages of Permanent Magnet Brushless DC (PMBLDC) Motor

Last Answer : Advantages and Disadvantages of Permanent Magnet Brushless DC (PMBLDC) Motor

Draw a neat sketch of ‘Locomotive coupler’ mechanism. Explain its working in brief.

Description : Draw a neat sketch of ‘Locomotive coupler’ mechanism. Explain its working in brief.

Last Answer : Figure: Coupler Rod of Locomotive  (Link AD = Link BC = Crank Link CD = Coupling Rod Link AB = Fixed Link = Frame) Working of Coupler Rod of Locomotive: It is an ... center distance between them. This mechanism is meant for transmitting rotary motion from one wheel to the other wheel.

Where can I learn how to repair a brushless motor?

Description : Where can I learn how to repair a brushless motor?

Last Answer : You can actually learn how to repair a brushless motor online. First for some background and tips read this message board string (http://www.rcgroups.com/forums/showthread.php?t=419334). There are also ... that show you how to begin fixing your motor (http://www.youtube.com/watch?v=I6GCyLm7mIw)

Describe in brief working of Symons rain gauge with neat labelled sketch.

Description : Describe in brief working of Symons rain gauge with neat labelled sketch.

Last Answer : The most common type of non- recording rain gauges used in our country is the Symon's raingauge'.  Working: A Symons Rain gauge consists of a cylindrical vessel of 127 mm internal diameter with an enlarged ... rim which is then measured by the measuring glass in mm' and tenth of mm'

Statement: Valve Cooling is necessary in some I. C. Engine. Justify the statement by giving reasons and explain its working with sketch.

Description : Statement: Valve Cooling is necessary in some I. C. Engine. Justify the statement by giving reasons and explain its working with sketch.

Last Answer : Reasons: Exhaust valve temperature in modern engine is as high as 750˚C. Thus cooling of exhaust gas becomes very important. Cooling water jackets are arranged near the valves for valve cooling. In many ... given to cooler stem as it falls back to stem again. This keeps the valve head cool.  

Enlist different types of traffic island and explain any one in brief with neat sketch.

Description : Enlist different types of traffic island and explain any one in brief with neat sketch.

Last Answer : The different types of traffic island are as follow: (1) Rotary or central islands. (2) Channelising or refuse islands. (1) Rotary or central islands: A traffic island constructed in ... each site of road intersection. A few typical designs of Channelising islands are illustrated below:

Define stub. Explain single and double stub in brief with neat sketch.

Description : Define stub. Explain single and double stub in brief with neat sketch.

Last Answer : Stub:- Stub is the piece of short circuited transmission line which is used to tune out the reactance of the load when connected across the transmission line as close as possible ... but lengths are independently adjustable. The double stub matching provides wide range of impedance matching. 

For a DC motor, what major component in addition to the field winding and the armature winding is necessary? w) a commutator x) a stator y) a battery z) a rotor

Description : For a DC motor, what major component in addition to the field winding and the armature winding is necessary? w) a commutator x) a stator y) a battery z) a rotor

Last Answer : ANSWER: W -- A COMMUTATOR

Is there anywhere in Edinburgh, Scotland, I can buy brushless motors?

Description : Is there anywhere in Edinburgh, Scotland, I can buy brushless motors?

Last Answer : It appears that Claremont Electric Motors and AD Auto Electrics are two places that would either carry brushless motors or at least provide you with information on where you can buy brushless motors.

Why brushless screwdriver is more preferred over brush screwdriver. From where we can buy best electric screwdriver.?

Description : Why brushless screwdriver is more preferred over brush screwdriver. From where we can buy best electric screwdriver.?

Last Answer : Brushless screwdriver has low noise low vibration and do not have the sparking issue . Brush screwdriver may give low torque after carbon brush damage.We can get best electric screwdriver from Microntech engineers . They provide kilews screwdriver

Which of the following statements, concerning the general maintenance of a brushless generator, is correct? A. Paint should be applied to insulating surfaces on an annual basis. B. Alcohol should be used to remove dust and grime from windings. C. High pressure air should be used to blow out carbon dust. D. Accessible generator parts should be wiped with a clean dry rag on a periodic basis.

Description : Which of the following statements, concerning the general maintenance of a brushless generator, is correct? A. Paint should be applied to insulating surfaces on an annual basis. B. Alcohol should be used to ... . D. Accessible generator parts should be wiped with a clean dry rag on a periodic basis.

Last Answer : Answer: D

Brushless generators are designed to operate without the use of ___________. A. brushes B. slip rings C. commutators D. all of the above

Description : Brushless generators are designed to operate without the use of ___________. A. brushes B. slip rings C. commutators D. all of the above

Last Answer : Answer: D

What are the parts of a brushless AC generator?

Description : What are the parts of a brushless AC generator?

Last Answer : Yoke, armature, stator, rotor, primary exciter, main exciter, rotary diode rectifier assembly, impeller, bearing & housing, end cover, terminal block, AVR.

Explain in brief the working principle of strain gauge. Define gauge factor and list out types of strain gauges.

Description : Explain in brief the working principle of strain gauge. Define gauge factor and list out types of strain gauges.

Last Answer : If a metal conductor is stretched or compressed, the resistance changes as both length and diameter change. There is a change in the value of resistivity of the conductor also when it is ... metal film strain gauges 6. Diffused metal strain gauges 7. Sputter deposited thin metal strain gauge

Draw and explain construction of Faiveley type pantograph collector. Also explain its working in brief.

Description : Draw and explain construction of Faiveley type pantograph collector. Also explain its working in brief. 

Last Answer : Faiveley type pantograph collector:  Construction of Faiveley type pantograph collector :  It consists of i) sub frame or base, ii) Articulated system, iii) Pneumatic control system including ... move freely in the slot of slotted rod & pantograph is operated purely by the up springs.

Give a brief life sketch of Birsa Munda. -History

Description : Give a brief life sketch of Birsa Munda. -History

Last Answer : Birsa was born in the mid-1870s in a family of Mundas, a tribal group that lived in Chottanagpur. He grew up around the forests of Bohanda, grazing sheep, playing flute, and dancing in ... did not kill their brethren and relatives. Birsa wanted to see these qualities again in the tribal society.

Describe in brief with neat sketch: i) English bond ii) Flemish bond

Description : Describe in brief with neat sketch: i) English bond ii) Flemish bond

Last Answer : English bond : The Bond with alternate courses of headers and stretchers with a closer placed next to quoin header is called as the English Bond. Points Should be Remembered for English bond: 1. A ... . 4. Flemish Bond is slightly economical as a number of brick bats can be used.

Describe in brief with neat sketch: i) Base line ii) Check line

Description : Describe in brief with neat sketch: i) Base line ii) Check line

Last Answer : i) Base line:  Base line is generally the longest line running roughly through the middle of the area. It is laid on a level ground as far as possible. The whole frame work is built upon this line. ... on the opposite side or a line joining some fixed point on any two sides of the triangle. 

Discuss in brief process of combustion in SI engines with a sketch.

Description : Discuss in brief process of combustion in SI engines with a sketch.

Last Answer : Combustion In S I Engine According to Ricardo, There are three stages of combustion in SI Engine as shown in figure above 1. Ignition lag stage 2. Flame propagation stage 3. After ... combustion is known as after burning. This generally happens when the rich mixture is supplied to engine. 

Describe in brief with neat sketch construction of tunnel with needle beam method

Description : Describe in brief with neat sketch construction of tunnel with needle beam method

Last Answer : In this method stout timber beam known as needle beam is used which forms the main temporary support during the excavation. Construction steps: (a) First of all a small drift of about 1 1 m is ... . (d) After excavation, the lining is provided to the tunnel section and mucking is done. 

Describe in brief caisson foundation for a bridge with neat sketch

Description : Describe in brief caisson foundation for a bridge with neat sketch

Last Answer : Caisson foundation A caisson foundation also called as pier foundation is a watertight retaining structure used as a bridge pier in the construction of a concrete dam or for the repair of ships. It is ... the ground to some desired depth and then filled with concrete thus forming a foundation.

Describe with neat sketch working of hysteresis motor.

Description : Describe with neat sketch working of hysteresis motor.

Last Answer : Working: When stator is energized with single phase ac supply, rotating magnetic field is produced because of starting (auxiliary) and main windings, which remain in circuit permanently. The ... the principle of magnetic locking this motor either rotates at synchronous speed or not at all.

With a neat sketch give the working of shaded pole induction motor.

Description : With a neat sketch give the working of shaded pole induction motor.

Last Answer : Explanation: It has squirrel cage rotor and salient pole stator. The stator poles are shaded partially by short circuited conductor band to create the phase difference between the fluxes emerging from shaded ... rotating magnetic field in the air-gap and torque is exerted on the squirrel cage rotor.

With the help of neat diagrams,explain the following methods of speed control in DC series motor. i) Field diverter method. ii) Armature diverter method.

Description : With the help of neat diagrams,explain the following methods of speed control in DC series motor. i) Field diverter method. ii) Armature diverter method.

Last Answer : (i) Field diverter method: - Resistance connected in parallel with field winding -By adjusting this resistance current can by diverted from field winding -Thus field current decreases and the speed can be ... decreased, the flux must increase and hence speed is decreased than the rated speed.

With neat sketch explain working of Weston type synchroscope.

Description : With neat sketch explain working of Weston type synchroscope.

Last Answer : Weston type synchroscope:  Working: It consists of three limbed transformer. The winding on one of the outer limbs is excited from bus- bars and that on other limb by incoming machine. The two fluxes ... the lamp is flickering at a very much slow rate and it is at its maximum brightness.

With a neat sketch explain working of 1 phase dynamometer type power factor meter.

Description : With a neat sketch explain working of 1 phase dynamometer type power factor meter.

Last Answer : Working of 1 phase dynamometer type power factor meter : The current coil is connected in series with load. Two pressure coils marked as A and B are connected across the supply terminals ... becomes stationary and the pointer shows steady deflection corresponding to the power factor of the load. 

With the help of neat sketch, state working principle of rotameter.

Description : With the help of neat sketch, state working principle of rotameter. 

Last Answer : Explanation- When there is no flow through the Rota meter, the float rest at the bottom of metering tube. When fluid enters the tube, the float moves up and the flow area increases. The float ... on the tube. With the help of float position and calibrated scale, we can measure the flow rate.

What is back emf in DC motor? Explain its significance.

Last Answer : Back emf: When the armature of DC motor rotates under the fixed magnetic field and cuts it, by Faraday's law an emf is induced in them. The induced emf acts in opposite direction to the ... the flow of armature current i.e. it automatically changes the armature current to meet load requirements. 

With the help of constructional diagram, explain the working of LDR with neat sketch.

Description : With the help of constructional diagram, explain the working of LDR with neat sketch.

Last Answer : Working Principle The resistance depends on the intensity of light, as resistance decreases with increase in light intensity. Characteristics Applications of LDR 1. They are often ... circuits, light intensity meters, for counting the packages moving on a conveyor belt, etc.

Describe the working of capacitor with a neat sketch.

Description : Describe the working of capacitor with a neat sketch.

Last Answer : Working of Capacitor: When we connect a battery (DC Voltage Source) across the capacitor, one plate (plate-I) gets attached to the positive terminal and another plate (plate-II) to the negative ... charges for a certain time. Thus the charged capacitor acts as a source electrical energy. 

Describe working of venturimeter with neat sketch.

Description : Describe working of venturimeter with neat sketch.

Last Answer : Explanation- It is a primary element of differential pressure Flow meters. 1) It consists of a straight inlet section, a converging conical inlet section, a cylindrical throat and diverging recovery cone. ... the buildup of heavy materials. d) Rectangular from which is used in air-duct work. 

Write the working of L-C-R meter with suitable sketch.

Description : Write the working of L-C-R meter with suitable sketch.

Last Answer : LCR meter: A LCR meter (Inductance L, Capacitance C, and Resistance R) test equipment used to measure the inductance, capacitance and, resistance of a component. It works on the principle ... relative change in magnitude of the repetitive variations of the voltage and current known as amplitudes.

Sketch the circuit of basic DC ammeter , derive equation for shunt resistance.

Description : Sketch the circuit of basic DC ammeter , derive equation for shunt resistance.

Last Answer : Derivation The basic movement of dc ammeter circuit consists of D' Arsonval galvanometer. When large current is to be measured then some extra modification is required. For measurement of large current by using ... same. Vsh =Vm m IshRsh=ImRm Rsh=ImRm/Ish Rsh=ImRm/(I-Im) 

Sketch DC signal conditioning circuit for pressure measurement using strain gauge. Justify it.

Description : Sketch DC signal conditioning circuit for pressure measurement using strain gauge. Justify it.

Last Answer : Diagram: Figure: DC signal conditioning circuit for pressure measurement using strain gauge Where, Rg= strain gauge resistance. Explanation: In order to measure strain with ... millivolts output per volt input. The Wheatstone circuit is also well suited for temperature compensation.

Application of DC Series Motor

Description : Application of DC Series Motor

Last Answer : 1. Electric traction 2. Cranes, 3. Passenger elevators, 4. Continuous conveyors, 5. Grinders, 6. Polishers,

If field current is decreased in shunt dc motor, the speed of the motor

Description : If field current is decreased in shunt dc motor, the speed of the motor (a) remains same. (b) increases. (c) decreases. (d) none of the above.

Last Answer : increases

What would happen if a DC motor was supplied with AC ?

Description : What would happen if a DC motor was supplied with AC ?

Last Answer : With three phase induction motor, humming and not rotate, but if single phase universal motor like air blower, home mixture, motor run on constant speed..speed variation not possible...

State the function of following parts of DC motor : i) Yoke ii) Poles iii) Field winding iv) Commutator.

Description : State the function of following parts of DC motor : i) Yoke ii) Poles iii) Field winding iv) Commutator. 

Last Answer : Function : i) Yoke: The yoke serves the following two purposes. i) It supports the other components such as poles and provides mechanical protection for whole machine. ii) It forms a part of ... one pole to another and thus to help the motor to develop a continuous and unidirectional torque  

DC series motor should never be started at no-load. Justify.

Description : DC series motor should never be started at no-load. Justify. 

Last Answer : At no load the field current (which is also the armature current) is very small and hence the useful air-gap field flux. Also the torque is very small.  As N ∝ 1/Ф the speed rises to ... on the rotating parts they may get damaged. Hence DC series motor should never be started on no-load.

State the principle of operation of a dc motor.

Last Answer : Principle of operation of a dc motor: When a current carrying conductor is placed in a magnetic field, the conductor experiences the mechanical force. The magnitude of force is given by  F = BIL newton  where F – Force , B – Maximum flux density , I – Current , L – Active length of conductor

Give the two functions of yoke in DC motor.

Description : Give the two functions of yoke in DC motor. 

Last Answer : Functions of yoke in DC motor: 1) Provides mechanical support for poles. 2) Acts as protecting cover for machine. 3) Provides path for magnetic flux.

List the various losses on a DC Motor.

Description : List the various losses on a DC Motor. 

Last Answer : The various losses on a DC Motor: 1) Winding losses (Copper losses): i) Armature winding losses ii) Shunt field losses iii) Series field losses 2) Core losses (iron losses): 3) Brush contact losses: 4) Windage and frictional (Mechanical losses):

A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling

Description : A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling diode is open circuited, then the motor :  (A) can be operated in first quadrant (B) ... in first & second quadrants (C) can be operated in first & fourth quadrants (D) cannot be operated

Last Answer : A separately excited dc motor operating in first quadrant is fed from 3-phase semi -converter free -wheeling diode is open circuited, then the motor : can be operated in first & fourth quadrants

In a DC motor, it is important to place the brushes along ______

Description : In a DC motor, it is important to place the brushes along ______ A) Magnetic Neutral Axis B) Normal Geometric Axis C) Nominal Geometric Axis D) None of these

Last Answer : In a DC motor, it is important to place the brushes along Magnetic Neutral Axis

In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians

Description : In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians (A) Armature amp-conductors × (θ/360o) (B) Armature amp-turns × (θ/360o) (C) Armature amp-conductors × (1/4 - θ/360o) (D) Armature amp-conductors × (1/8 - θ/360o)

Last Answer : In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians Armature amp-conductors × (1/8 - θ/360o)

In a differentially compounded dc motor

Description : In a differentially compounded dc motor (A) the speed is constant as the torque increases (B) the speed falls non-linearly as the torque increases (C) the speed increases non-linearly as the torque increases (D) the flux increases as the load increases

Last Answer : In a differentially compounded dc motor the speed increases non-linearly as the torque increases

A large dc motor is required to control the speed of the blower from a 3 -phase ac source. The suitable ac to ...

Description : A large dc motor is required to control the speed of the blower from a 3 -phase ac source. The suitable ac to dc converter is, 3 -phase (a) Fully controlled bridge converter ( ... bridge converter with freewheeling diode (c) Half controlled bridge converter (d) Converter pair in sequence control

Last Answer : a fullu control