or the selection of endospore-forming bacteria, a mixed culture can be heated at A- 80°C for 10 minutes B- 70°C for 10 minutes C- 60°C for 10 minutes D- 90°C for 10 minutes

or the selection of endospore-forming bacteria, a mixed culture can be heated at
A- 80°C for 10 minutes
B- 70°C for 10 minutes
C- 60°C for 10 minutes
D- 90°C for 10 minutes
by

1 Answer

Answer :

80°C for 10 minutes
by

Related questions

In a cup, tea cools from 90°C to 80°C in exactly one minute. It will cool from 70°C to 60°C in (a) less than one minute (b) exactly one minute (c) nearly one minute (d) more than one minute

Description : In a cup, tea cools from 90°C to 80°C in exactly one minute. It will cool from 70°C to 60°C in (a) less than one minute (b) exactly one minute (c) nearly one minute (d) more than one minute

Last Answer : Ans:(d)

If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Description : If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Last Answer : Answer : b

40 optimum working temperature for diesel engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Description : 40 optimum working temperature for diesel engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Last Answer : ∙ 88-90°c

ptimum working temperature for petrol engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Description : ptimum working temperature for petrol engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Last Answer : ∙ 71-82°c

For heavier fuels the cooling system of an internal combustion engine, the temperature is maintained at a) 78 to 80°C b) 80 to 84 °C c) 85 to 88°C d) 88 to 90°C

Description : For heavier fuels the cooling system of an internal combustion engine, the temperature is maintained at a) 78 to 80°C b) 80 to 84 °C c) 85 to 88°C d) 88 to 90°C

Last Answer : d) 88 to 90°C

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Determination of water content of a soil sample suspected to contain gypsum is made by drying the sample for longer period at a temperature not more than (A) 60°C (B) 80°C (C) 100°C (D) 110°C

Description : Determination of water content of a soil sample suspected to contain gypsum is made by drying the sample for longer period at a temperature not more than (A) 60°C (B) 80°C (C) 100°C (D) 110°C

Last Answer : (B) 80°C

The flash point of transformer oil should be higher than (a) 40°C (b) 60°C (c) 80°C (d) 104°C

Description : The flash point of transformer oil should be higher than (a) 40°C (b) 60°C (c) 80°C (d) 104°C

Last Answer : (d) 104°C

Pasteurisation is the process in which milk is heated to – (1) 60°C for 10 minutes (2) 63° C for 20 minutes (3) 63°C for 30 minutes (4) 72°C for 10 minutes

Description : Pasteurisation is the process in which milk is heated to – (1) 60°C for 10 minutes (2) 63° C for 20 minutes (3) 63°C for 30 minutes (4) 72°C for 10 minutes

Last Answer : (3) 63°C for 30 minutes Explanation: Pasteurization for pasteurisation) is a process of heating a food, which is usually a liquid, to a specific temperature for a predefined length of time ... (assuming the pasteurized product is stored as indicated and is consumed before its expiration date).

Pasteurisation is the process in which milk is heated to (1) 60°C for 10 minutes (2) 63° C for 20 minutes (3) 63°C for 30 minutes (4) 72°C for 10 minutes

Description : Pasteurisation is the process in which milk is heated to (1) 60°C for 10 minutes (2) 63° C for 20 minutes (3) 63°C for 30 minutes (4) 72°C for 10 minutes

Last Answer : 63°C for 30 minutes

A rod 3 m long is heated from 10°C to 90°C. Find the expansion of rod. Take Young’s modulus = 1.0 x 10^5 MN/m2 and coefficient of thermal expansion = 0.000012 per degree centigrade. 1. 0.168 cm 2. 0.208 cm 3. 0.288 cm 4. 0.348 cm

Description : A rod 3 m long is heated from 10°C to 90°C. Find the expansion of rod. Take Young’s modulus = 1.0 x 10^5 MN/m2 and coefficient of thermal expansion = 0.000012 per degree centigrade. 1. 0.168 cm 2. 0.208 cm 3. 0.288 cm 4. 0.348 cm

Last Answer : 3. 0.288 cm

A body cools down from 75°C to 70°C in 10 minutes. It will cool down from 70° C to 65° C in __________ minutes. (A) 10 (B) > 10 (C) < 10 (D) Either (B) or (C), depends on the mass of the body

Description : A body cools down from 75°C to 70°C in 10 minutes. It will cool down from 70° C to 65° C in __________ minutes. (A) 10 (B) > 10 (C) < 10 (D) Either (B) or (C), depends on the mass of the body

Last Answer : (B) > 10

At what temperature is gypsum heated to form Plaster of Paris?a) 90°C b) 100°C c) 110°C d) 120°C

Description : At what temperature is gypsum heated to form Plaster of Paris?a) 90°C b) 100°C c) 110°C d) 120°C

Last Answer : b) 100°C

A disease producing species occurring in a mixed culture can often be selected on the basisofits A- pathogenic properties B- special carbon source C- special nitrogen source D-.none of these

Description : A disease producing species occurring in a mixed culture can often be selected on the basisofits A- pathogenic properties B- special carbon source C- special nitrogen source D-.none of these

Last Answer : pathogenic properties

Which one of the following is NOT part of the streak-plate method? a. Making four sets of streaks on a plate. b. Diluting a mixed culture in molten agar. c. Using a mixed culture. d. Using a sterilized loop.

Description : Which one of the following is NOT part of the streak-plate method? a. Making four sets of streaks on a plate. b. Diluting a mixed culture in molten agar. c. Using a mixed culture. d. Using a sterilized loop.

Last Answer : b. Diluting a mixed culture in molten agar.

Which one of the following is not a part of Koch‘s postulates? a. The microorganism must be isolated from a dead animal and pure cultured b. The microorganism and disease can be identified from a mixed culture c. The pure cultured organism is inoculated into a healthy susceptible animal. d. The same microorganism must be present in every case of the disease.

Description : Which one of the following is not a part of Koch s postulates? a. The microorganism must be isolated from a dead animal and pure cultured b. The microorganism and disease can be identified from ... a healthy susceptible animal. d. The same microorganism must be present in every case of the disease.

Last Answer : d. The same microorganism must be present in every case of the disease.

During Griffith's transformation experiments _____. a. Live S Strain Bacteria Mixed With Dead R Strain Bacteria Caused Animal Death. b. Live S Strain Bacteria Mixed With Dead R Strain Bacteria Failed To Kill The Animals. c. Dead S Strain Bacteria Mixed With Live R Strain Bacteria Caused Animal Death. d. Dead S Strain Bacteria Mixed With Live R Strain Bacteria Failed To Kill The Animals.

Description : During Griffith's transformation experiments _____. a. Live S Strain Bacteria Mixed With Dead R Strain Bacteria Caused Animal Death. b. Live S Strain Bacteria Mixed With Dead R Strain Bacteria Failed To ... . d. Dead S Strain Bacteria Mixed With Live R Strain Bacteria Failed To Kill The Animals.

Last Answer : c. Dead S Strain Bacteria Mixed With Live R Strain Bacteria Caused Animal Death.

If a chemical has a phenol coefficient (PC) of 63, it means the chemical a. ‗Is Better Than One With A PC Of 22., b. Will Kill 63P/O Of Bacteria. c. Kills Microbes At 63°C.d. Will Kill All Bacteria In 63 Minutes.

Description : If a chemical has a phenol coefficient (PC) of 63, it means the chemical a. ‗Is Better Than One With A PC Of 22., b. Will Kill 63P/O Of Bacteria. c. Kills Microbes At 63°C. d. Will Kill All Bacteria In 63 Minutes.

Last Answer : a. ‗Is Better Than One With A PC Of 22.,

Agar is used for solidifying culture media because A-it does not affect by the growth of bacteria B-it does not add to the nutritive properties of the medium C-the melting and solidifying points of agar solution are not the same D-all of the above

Description : Agar is used for solidifying culture media because A-it does not affect by the growth of bacteria B-it does not add to the nutritive properties of the medium C-the melting and solidifying points of agar solution are not the same D-all of the above

Last Answer : all of the above

Bread mold is a member of which phylum? Sexual mating types fuse forming a _____. a. Zygomycota, zyogospores b. Glomeromycota, sporangiospores c. Ascomycota, ascospores d. Basidiomycota, basidiospores

Description : Bread mold is a member of which phylum? Sexual mating types fuse forming a _____. a. Zygomycota, zyogospores b. Glomeromycota, sporangiospores c. Ascomycota, ascospores d. Basidiomycota, basidiospores

Last Answer : a. Zygomycota, zyogospores

In children, this skin disease is characterized by the production of thin-walled blisters oozing a yellowish fluid and forming yellowish- brown flakes. a. Toxic shock syndrome b. Scalded skin syndrome c. Erysipelas d. Impetigo

Description : In children, this skin disease is characterized by the production of thin-walled blisters oozing a yellowish fluid and forming yellowish- brown flakes. a. Toxic shock syndrome b. Scalded skin syndrome c. Erysipelas d. Impetigo

Last Answer : d. Impetigo

What is the setting for most autoclaves?a. 121oC at 15 psi for 15-30 minutes b. 100oC at 10 psi for 10-20 minutes c. 110oC at 21 psi for 20-30 min d. 150oC at 20 psi for 10-15 minutes

Description : What is the setting for most autoclaves?a. 121oC at 15 psi for 15-30 minutes b. 100oC at 10 psi for 10-20 minutes c. 110oC at 21 psi for 20-30 min d. 150oC at 20 psi for 10-15 minutes

Last Answer : a. 121oC at 15 psi for 15-30 minutes

During the first 10 minutes after injection of phage DNA, no phage can be recovered by disrupting the infected bacterium. This is termed as A- eclipse period B- rise period C- latent period D- burst size

Description : During the first 10 minutes after injection of phage DNA, no phage can be recovered by disrupting the infected bacterium. This is termed as A- eclipse period B- rise period C- latent period D- burst size

Last Answer : eclipse period

.If a 1:600 dilution of a test compound kills a standard population of Staphylococcus aureus in 10minutes but not 5 minutes while a 1:60 dilution of phenol kills the population in thesame time, what is the phenol coefficient of the test compound? A- 1 B- 5 C- .10 D- .50

Description : .If a 1:600 dilution of a test compound kills a standard population of Staphylococcus aureus in 10minutes but not 5 minutes while a 1:60 dilution of phenol kills the population in thesame time, what is the phenol coefficient of the test compound? A- 1 B- 5 C- .10 D- .50

Last Answer : .10

The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the right face is 10 W/m2 .K. At steady state, the temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Description : The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the ... temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Last Answer : (D) 48.7

Clonal selection includes a. Antigen-receptor binding on B cells. b. Antibody secretion recognizing same epitope as on B cell receptors. c. Differentiation of B cells into plasma cells and memory cells. d. All the above (A—C) are correct.

Description : Clonal selection includes a. Antigen-receptor binding on B cells. b. Antibody secretion recognizing same epitope as on B cell receptors. c. Differentiation of B cells into plasma cells and memory cells. d. All the above (A—C) are correct.

Last Answer : d. All the above (A—C) are correct.

Which of the following theory of antibody production is most widely accepted? A- Side chain theory B- Clonal selection theory C- Direct template theory D- Indirect template theory

Description : Which of the following theory of antibody production is most widely accepted? A- Side chain theory B- Clonal selection theory C- Direct template theory D- Indirect template theory

Last Answer : Clonal selection theory

Which of the following is correct for CD8 T cells? A- CD8 T cells only recognize virus-infected cells B- CD8 T cell receptor recognizes epitopes that are also commonly recognized by B cells C- In the thymus, CD8 T cells undergo positive selection only, whereas CD4 T cells undergo negative selection only D- CD8 T cells can kill individual virus-infected cells in a contact dependent fashion

Description : Which of the following is correct for CD8 T cells? A- CD8 T cells only recognize virus-infected cells B- CD8 T cell receptor recognizes epitopes that are also commonly recognized by B cells ... selection only D- CD8 T cells can kill individual virus-infected cells in a contact dependent fashion

Last Answer : CD8 T cells can kill individual virus-infected cells in a contact dependent fashion

For the selection of lactobacilli present in cheddar cheese, the pH of the medium is Maintainedat A- 6.35 B- .5.35 C- 4.35 D- 5.75

Description : For the selection of lactobacilli present in cheddar cheese, the pH of the medium is Maintainedat A- 6.35 B- .5.35 C- 4.35 D- 5.75

Last Answer : .5.35

By some estimates, about ______ of our 25,000 genes are identical to those in some members of the Bacteria. a. 10 b. 20 c. 200 d. 1000

Description : By some estimates, about ______ of our 25,000 genes are identical to those in some members of the Bacteria. a. 10 b. 20 c. 200 d. 1000

Last Answer : c. 200

Psychrophilic bacteria species grow well at 10 degrees C, while mesophilic bacteria species grow well at _____ degrees C. a. 37 b. 50 c. 75 d. 98

Description : Psychrophilic bacteria species grow well at 10 degrees C, while mesophilic bacteria species grow well at _____ degrees C. a. 37 b. 50 c. 75 d. 98

Last Answer : a. 37

Thermal algae can live in: (a) Saline soil (b) Hot water streams of 70°C (C) Deserts (d) Snow balls

Description : Thermal algae can live in: (a) Saline soil (b) Hot water streams of 70°C (C) Deserts (d) Snow balls

Last Answer : Ans. ((b))

Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Description : Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Last Answer : (A) 7 kgf/cm2 and 70 °C

The insulation resistance of a DC motor is observed to be 15 MΩ at a temp. of 70°C. what is its value corrected to 40°C. the correction factor for 70°C is 8.0.

Description : The insulation resistance of a DC motor is observed to be 15 MΩ at a temp. of 70°C. what is its value corrected to 40°C. the correction factor for 70°C is 8.0. 

Last Answer : Observed resistance at 70°C – 15 MΩ. Temperature correction factor – 8. Rm = kt * Rt           kt – correction factor. Rm = 8 * 15          Rt – resistance measured at +°C. Rm = 120 MΩ.       Rm – corrected value to 40°C The IR of DC motor corrected to 40°C is 120 MΩ. 

Three of the following statements about enzymes are correct and one is wrong. Which one is wrong? (a) Enzymes require optimum pH for maximal activity. (b) Enzymes are denatured at high temperature but in certain exceptional organisms they are effective even at temperatures 80° - 90°C. (c) Enzymes are highly specific. (d) Most enzymes are proteins but some are lipids.

Description : Three of the following statements about enzymes are correct and one is wrong. Which one is wrong? (a) Enzymes require optimum pH for maximal activity. (b) Enzymes are denatured at high temperature but ... - 90°C. (c) Enzymes are highly specific. (d) Most enzymes are proteins but some are lipids.

Last Answer : (d) Most enzymes are proteins but some are lipids.

Maximum theoretical suction lift for water at 15°C by a centrifugal pump is 34 ft. The same for water at 90°C will be __________ ft. (A) 40 (B) 34 (C) 8 (D) 37

Description : Maximum theoretical suction lift for water at 15°C by a centrifugal pump is 34 ft. The same for water at 90°C will be __________ ft. (A) 40 (B) 34 (C) 8 (D) 37

Last Answer : (C) 8

For every 10°C rise in temperature, the rate of chemical reaction doubles. When the temperature is increased from 30 to 70°C, the rate of reaction increases __________ times. (A) 8 (B) 12 (C) 16 (D) 32

Description : For every 10°C rise in temperature, the rate of chemical reaction doubles. When the temperature is increased from 30 to 70°C, the rate of reaction increases __________ times. (A) 8 (B) 12 (C) 16 (D) 32

Last Answer : (C) 16

Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Description : Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Last Answer : (A) 25°C, 2 atm

Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from (A) 80° to 90°C (B) 90° to 95°C (C) 103° to 105°C (D) 105° to 110°C

Description : Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from (A) 80° to 90°C (B) 90° to 95°C (C) 103° to 105°C (D) 105° to 110°C

Last Answer : (D) 105° to 110°C

In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Last Answer : (D) ∞

Which one of the following statements is NOT true of innate immunity? a. It is an early-warning system against pathogens. b. It is a form of immunity found only in vertebrates. c. It is a nonspecific response. d. It responds within minutes to many infections.

Description : Which one of the following statements is NOT true of innate immunity? a. It is an early-warning system against pathogens. b. It is a form of immunity found only in vertebrates. c. It is a nonspecific response. d. It responds within minutes to many infections.

Last Answer : b. It is a form of immunity found only in vertebrates.

At 160°C, it takes about minutes to kilt bacterial spores in a hot-air oven. a. 30 b. 60 c. 90 d. 120

Description : At 160°C, it takes about minutes to kilt bacterial spores in a hot-air oven. a. 30 b. 60 c. 90 d. 120

Last Answer : d. 120

Stringent anaerobes can be grown in a media by taking special measure as A.boiling the media for several minutes B.addition of cysteine C.passing through oxygen-free nitrogen D.any of these

Description : Stringent anaerobes can be grown in a media by taking special measure as A.boiling the media for several minutes B.addition of cysteine C.passing through oxygen-free nitrogen D.any of these

Last Answer : D.any of these

Stringent anaerobes can be grown in a media by taking special measure as A- boiling the media for several minutes B- addition of cysteine C- passing through oxygen-free nitrogen D- any of these

Description : Stringent anaerobes can be grown in a media by taking special measure as A- boiling the media for several minutes B- addition of cysteine C- passing through oxygen-free nitrogen D- any of these

Last Answer : any of these

Time in minutes at any defined temperature to destroy 90% of organisms is A D Value B Z value C F Value D Q10 value

Description : Time in minutes at any defined temperature to destroy 90% of organisms is A D Value B Z value C F Value D Q10 value

Last Answer : A D Value

A hot air balloon has a volume of 2800 m^3 at 99°C. What is the volume if the air cools to 80°C?

Description : A hot air balloon has a volume of 2800 m^3 at 99°C. What is the volume if the air cools to 80°C?

Last Answer : A hot air balloon has a volume of 2800 m3 at 99°C. What is the volume if the air cools to 80°C?

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

Pollen grains can be stored for several years in liquid nitrogen having a temperature of (a) –120°C (b) –80°C (c) –196°C (d) –160°C

Description : Pollen grains can be stored for several years in liquid nitrogen having a temperature of (a) –120°C (b) –80°C (c) –196°C (d) –160°C

Last Answer : (c) –196°C

Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Description : Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Last Answer : (C) Thick molten soap at 80°C

Pollen grains can be stored for several years in liquid nitrogen having a temperature of (1) –120°C (2) –80°C (3) –196°C (4) –160°C

Description : Pollen grains can be stored for several years in liquid nitrogen having a temperature of (1) –120°C (2) –80°C (3) –196°C (4) –160°C

Last Answer : (3) –196°C