Catalyst used in the oxidation of benzene to produce Maleic anhydride is (A) V2O5 (B) Pt (C) Ni (D) Cr

Catalyst used in the oxidation of benzene to produce Maleic anhydride
is
(A) V2O5
(B) Pt
(C) Ni
(D) Cr
by

1 Answer

Answer :

(A) V2O5
by

Related questions

Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Description : Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Last Answer : (C) V2O5

Maleic anhydride is produced by catalytic oxidation of (A) Toluene (B) Ethyl alcohol (C) Naphthalene (D) Benzene

Description : Maleic anhydride is produced by catalytic oxidation of (A) Toluene (B) Ethyl alcohol (C) Naphthalene (D) Benzene

Last Answer : (D) Benzene

Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Description : Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Last Answer : (A) Formaldehyde

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

__________ is used as a catalyst in fat splitting. (A) ZnO (B) Ni (C) V2O5 (D) FeO

Description : __________ is used as a catalyst in fat splitting. (A) ZnO (B) Ni (C) V2O5 (D) FeO

Last Answer : (A) ZnO

The catalyst used in hydrogenation of oils is - (1) Fe (2) V2O5 (3) Ni (4) O2

Description : The catalyst used in hydrogenation of oils is - (1) Fe (2) V2O5 (3) Ni (4) O2

Last Answer : (3) Ni Explanation: The catalyst used in hydrogenation of oils is nickel. It is used to speed up the reaction. Vegetable oils convert into vanaspati after hydrogenation.

Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Last Answer : (B) Vanadium

Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol

Last Answer : (A) Adipic acid and Hexamethylene diamine

Nylon-6 is manufactured from (A) Caprolactam (B) Adipic acid and Hexamethylenediamine (C) Maleic anhydride and Hexamethylenediamine (D) Sebacic acid and Hexamethylenediamine

Description : Nylon-6 is manufactured from (A) Caprolactam (B) Adipic acid and Hexamethylenediamine (C) Maleic anhydride and Hexamethylenediamine (D) Sebacic acid and Hexamethylenediamine

Last Answer : (A) Caprolactam

Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Description : Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Last Answer : (B) Vinyl chloride

Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol

Last Answer : (A) Hexamethylene diamine and adipic acid

Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid

Description : Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid

Last Answer : (A) Caprolactam

Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Description : Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Last Answer : (B) K2O

Phthalic anhydride is made by the (A) Oxidation of naphthalene (B) Oxidation of benzene (C) Dehydrogenation of ethyl benzene (D) None of these

Description : Phthalic anhydride is made by the (A) Oxidation of naphthalene (B) Oxidation of benzene (C) Dehydrogenation of ethyl benzene (D) None of these

Last Answer : (A) Oxidation of naphthalene

Phthalic anhydride is produced by the oxidation of (A) Naphthalene (B) Benzene (C) Toluene(D) Aniline

Description : Phthalic anhydride is produced by the oxidation of (A) Naphthalene (B) Benzene (C) Toluene (D) Aniline

Last Answer : (B) Benzene

The metal that is used as a catalyst in the hydrogenation of oils is (a) Ni (b) Pb (c) Cu (d) Pt

Description : The metal that is used as a catalyst in the hydrogenation of oils is (a) Ni (b) Pb (c) Cu (d) Pt

Last Answer : Ans:(a)

The metal that is used as a catalyst in the hydrogenation of oils is - (1) Pb (2) Ni (3) Cu (4) Pt

Description : The metal that is used as a catalyst in the hydrogenation of oils is - (1) Pb (2) Ni (3) Cu (4) Pt

Last Answer : (2) Ni Explanation: The catalyst used in hydrogenation of oils is nickel. It is used to speed up the reaction.

Which one of the following is not a metal catalyst for the hydrogenation of an alkene? (a) Pd (b) Pt (c) Na(d) Ni

Description : Which one of the following is not a metal catalyst for the hydrogenation of an alkene? (a) Pd (b) Pt (c) Na (d) Ni

Last Answer : Na

Benzene reacts with H2 at 150°C at 30 atm in the presence of Ni catalyst to give (a) Cyclohexane (b) Cyclohexene (c) n-Hexane (d) No reaction occurs

Description : Benzene reacts with H2 at 150°C at 30 atm in the presence of Ni catalyst to give (a) Cyclohexane (b) Cyclohexene (c) n-Hexane (d) No reaction occurs

Last Answer : Cyclohexane

Which of the following statements are false about benzene? (a) It is a planar molecule with bond angles 120°(b) It is immiscible with water forming the lower layer. (c) It can be converted into cyclohexane by hydrogenation at 200°C in the presence of Ni catalyst. (d) It reacts with ethyl chloride in the presence of aluminium chloride to form ethylbenzene..

Description : Which of the following statements are false about benzene? (a) It is a planar molecule with bond angles 120°. (b) It is immiscible with water forming the lower layer. (c) It can be ... Ni catalyst. (d) It reacts with ethyl chloride in the presence of aluminium chloride to form ethylbenzene.

Last Answer : It is immiscible with water forming the lower layer

Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Description : Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Last Answer : (C) V2O5

In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to SO3 can be increased by (A) Increasing the oxygen concentration (B) Putting more quantity of V2O5 catalyst in the converter (C) Removing some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Description : In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3 ), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to ... some quantity of SO3 during intermediate stage (D) Maintaining low temperature & pressure in the converter

Last Answer : (C) Removing some quantity of SO3 during intermediate stage

Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Description : Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Last Answer : (D) Oxides of nitrogen & V2O5 on a porous carrier

Why does V2O5 acts as catalyst ?

Description : Why does V2O5 acts as catalyst ?

Last Answer : Ans : It is because V shows variable O.S . 

What purpose does FeCl3 serve in the electrophilic aromatic substitution reaction between chlorine and benzene? (a) It serves as a radical initiator to produce the chlorine radical needed to propagate the chain reaction. (b) It functions by destabilizing the carbocationic intermediate and thereby increases the rate of H+ loss. (c) It serves as a Lewis base catalyst by reacting with Cl2 to generate chloride ions. (d) It serves as a Lewis acid catalyst by reacting with the Cl2 and thereby activates it toward attack by benzene’s π electrons.

Description : What purpose does FeCl3 serve in the electrophilic aromatic substitution reaction between chlorine and benzene? (a) It serves as a radical initiator to produce the chlorine radical needed to propagate the ... by reacting with the Cl2 and thereby activates it toward attack by benzene's π electrons.

Last Answer : It serves as a Lewis acid catalyst by reacting with the Cl2 and thereby activates it toward attack by benzene’s π electrons.

Anthracene undergoes oxidation with O2/V2O5 at 500°C to give (a) Benzoic acid (b) Anthraquinone (c) Phthalic acid (d) Benzophenone

Description : Anthracene undergoes oxidation with O2/V2O5 at 500°C to give (a) Benzoic acid (b) Anthraquinone (c) Phthalic acid (d) Benzophenone

Last Answer : Anthraquinone

Most common stainless steel type 316, which is highly resistant to corrosion contains (A) 16-13% Cr 10-14% Ni and 2-3% Mo (B) 20-22% Cr, and 8-10% Ni (C) 2-4% Cr, 22% NI and 2-4% Mo (D) None of these

Description : Most common stainless steel type 316, which is highly resistant to corrosion contains (A) 16-13% Cr 10-14% Ni and 2-3% Mo (B) 20-22% Cr, and 8-10% Ni (C) 2-4% Cr, 22% NI and 2-4% Mo (D) None of these

Last Answer : (A) 16-13% Cr 10-14% Ni and 2-3% Mo

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

Benzene reacts with acetic anhydride in the presence of AlCl3 to form (a) Acetophenone (b) Benzophenone (c) Phenylacetic acid (d) Phenyl acetate

Description : Benzene reacts with acetic anhydride in the presence of AlCl3 to form (a) Acetophenone (b) Benzophenone (c) Phenylacetic acid (d) Phenyl acetate

Last Answer : Acetophenone

Matching the information given in the three columns of the following table. [Note: Atomic Number of Cr=24,V=23,Pt=78)] Correct combination for `[PtCl_

Description : Matching the information given in the three columns of the following table. [Note: Atomic Number of Cr=24,V=23,Pt=78)] Correct combination for `[PtCl_

Last Answer : Matching the information given in the three columns of the following table. [Note: Atomic Number of Cr=24,V=23,Pt=78 ... (IV),(iv),P D. (III),(ii),R

Matching the information given in the three columns of the following table. [Note: Atomic Number of Cr=24,V=23,Pt=78)] Correct combination for `[VCl_(

Description : Matching the information given in the three columns of the following table. [Note: Atomic Number of Cr=24,V=23,Pt=78)] Correct combination for `[VCl_(

Last Answer : Matching the information given in the three columns of the following table. [Note: Atomic Number of Cr=24,V=23,Pt=78 ... (III),(ii),R D. (IV),(iv),Q

Matching the information given in the three columns of the following table. [Note: Atomic Number of Cr=24,V=23,Pt=78)] About `(CrCl_(3)(NH_(3))_(3))`

Description : Matching the information given in the three columns of the following table. [Note: Atomic Number of Cr=24,V=23,Pt=78)] About `(CrCl_(3)(NH_(3))_(3))`

Last Answer : Matching the information given in the three columns of the following table. [Note: Atomic Number of Cr=24,V=23,Pt=78)] ... (IV),(i), R D. (I),(ii),S

Constantan is an alloy of (A) Cu (55%) & Sn (45%) (B) Cu (55%) & Ni (45%) (C) Pt (95%) & Rh (10%) (D) Fe (80%) & Ni (20%)

Description : Constantan is an alloy of (A) Cu (55%) & Sn (45%) (B) Cu (55%) & Ni (45%) (C) Pt (95%) & Rh (10%) (D) Fe (80%) & Ni (20%)

Last Answer : (B) Cu (55%) & Ni (45%)

Compare the following complexes with respect to structural shapes of units, magnetic behaviour and hybrid orbitals involved in units : [Co(NH3)6]+3, [Cr(NH3)6]3+, Ni(CO)4 (At. nos. : Co = 27, Cr = 24, Ni = 28) -Chemistry

Description : Compare the following complexes with respect to structural shapes of units, magnetic behaviour and hybrid orbitals involved in units : [Co(NH3)6]+3, [Cr(NH3)6]3+, Ni(CO)4 (At. nos. : Co = 27, Cr = 24, Ni = 28) -Chemistry

Last Answer : (i) [Co(NH3)6]+3 → Octahedral shape, d2sp3 hybridisation, diamagnetic Formation of [Co(NH2)6]+3 → oxidation state of Co is +3.

Compare the following complexes with respect to their shape, magnetic behaviour and the hybrid orbitals involved : (i) [CoF4]2- (ii) [Cr(H2O)2(C2O4)2]– (iii) [Ni(CO)4] (Atomic number : Co = 27, Cr = 24, Ni = 28) -Chemistry

Description : Compare the following complexes with respect to their shape, magnetic behaviour and the hybrid orbitals involved : (i) [CoF4]2- (ii) [Cr(H2O)2(C2O4)2]– (iii) [Ni(CO)4] (Atomic number : Co = 27, Cr = 24, Ni = 28) -Chemistry

Last Answer : (i) [COF4]2_ : Tetrafluorido cobalt (III) ion Coordination number = 4 Shape = Tetrahedral Hybridisation = sp3 Important Questions for Class 12 Chemistry Chapter 9 Coordination Compounds Class 12 Important Questions 7

The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Description : The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Last Answer : (A) Jacketed liquid phase CSTR

Catalytic oxidation of naphthalene produces (A) Styrene (B) Phenol (C) Phthalic anhydride (D) None of these

Description : Catalytic oxidation of naphthalene produces (A) Styrene (B) Phenol (C) Phthalic anhydride (D) None of these

Last Answer : (C) Phthalic anhydride

Catalyst used in desulphurisation of naphtha is (A) Co-Mo (B) Pt-Rh (C) Silica gel (D) Nickel

Description : Catalyst used in desulphurisation of naphtha is (A) Co-Mo (B) Pt-Rh (C) Silica gel (D) Nickel

Last Answer : (A) Co-Mo

Which of the following has highest melting point? Ni, Fe, Pt, W. -Chemistry 9th

Description : Which of the following has highest melting point? Ni, Fe, Pt, W. -Chemistry 9th

Last Answer : i think all are equal

`{:(,"Compounds",,"O.N."),((A),KMn^(**)O_(4),(1),+4),((B),Ni^(**)(CO)_(4),(2),+7),((C),[Pt^(**)(NH_(3))Cl_(2)]Cl_(2),(3),0),((D),Na_(2)O_(2)^(**),(4),

Description : `{:(,"Compounds",,"O.N."),((A),KMn^(**)O_(4),(1),+4),((B),Ni^(**)(CO)_(4),(2),+7),((C),[Pt^(**)(NH_(3))Cl_(2)]Cl_(2),(3),0),((D),Na_(2)O_(2)^(**),(4),

Last Answer : `{:(,"Compounds",,"O.N."),((A),KMn^(**)O_(4),(1),+4),((B),Ni^(**)(CO)_(4),(2),+7),((C),[Pt^(**)(NH_(3) ... ),(2,3,1,4):}` D. `{:(A,B,C,D),(4,1,2,3):}`

Which one of the following has a square planar geometry? `(Co=27, Ni=28, Fe=26, Pt=78)`

Description : Which one of the following has a square planar geometry? `(Co=27, Ni=28, Fe=26, Pt=78)`

Last Answer : Which one of the following has a square planar geometry? `(Co=27, Ni=28, Fe=26, Pt=78)` A. `[NiCl_(4)]^(2-) ... `[CoCl_(4)]^(2-)` D. `[FeCl_(4)]^(2-)`

The geometries of the ammonia complexes of `Ni^(2+),Pt^(2+) and Zn^(2+)`, respectively, are

Description : The geometries of the ammonia complexes of `Ni^(2+),Pt^(2+) and Zn^(2+)`, respectively, are

Last Answer : The geometries of the ammonia complexes of `Ni^(2+),Pt^(2+) and Zn^(2+)`, ... planar and octahedral D. octahedral , tetrahedral and square planar

Among the following complexes : `K_(3)[Fe(CN)_(6)],[Co(NH_(3))_(6)]Cl_(3)` , `Na_(3)[Co ( o x )_(3)],[Ni(H_(2)O)_(6)]Cl_(2)`, `K_(2)[Pt(CN)_(4)]` and

Description : Among the following complexes : `K_(3)[Fe(CN)_(6)],[Co(NH_(3))_(6)]Cl_(3)` , `Na_(3)[Co ( o x )_(3)],[Ni(H_(2)O)_(6)]Cl_(2)`, `K_(2)[Pt(CN)_(4)]` and

Last Answer : Among the following complexes : `K_(3)[Fe(CN)_(6)],[Co(NH_(3))_(6)]Cl_(3)` , `Na_(3)[Co ( o x )_(3)],[Ni(H_( ... ,M,N B. K,N,O,P C. L,M,O,P D. L,M,N,O

Naphthalic anhydride represented a major pathway of its degradation in soil through a). hydrolysis b). dealkylation c). oxidation d).decarboxylation

Description : Naphthalic anhydride represented a major pathway of its degradation in soil through a). hydrolysis b). dealkylation c). oxidation d).decarboxylation

Last Answer : d).decarboxylation

Propyne can be converted to propene by using (a) H2 + Lindlar's catalyst (b) NH2NH2 (c) H2 + Pt catalyst (d) NH2NH2 + KOH

Description : Propyne can be converted to propene by using (a) H2 + Lindlar's catalyst (b) NH2NH2 (c) H2 + Pt catalyst (d) NH2NH2 + KOH

Last Answer : H2 + Lindlar's catalyst

The reagent needed to convert 2-butyne to cis-2-butene is : (a) H2/Pt (b) H2/Lindlar’s catalyst (c) Li/NH3 (d) Na/NH3

Description : The reagent needed to convert 2-butyne to cis-2-butene is : (a) H2/Pt (b) H2/Lindlar’s catalyst (c) Li/NH3 (d) Na/NH3

Last Answer : H2/Lindlar’s catalyst

Naphthalene undergoes reduction with H2 in the presence of Ni catalyst at high temperature and pressure to give (a) Phthalic acid (b) Decalin (c) Benzoic acid (d) Tetralin

Description : Naphthalene undergoes reduction with H2 in the presence of Ni catalyst at high temperature and pressure to give (a) Phthalic acid (b) Decalin (c) Benzoic acid (d) Tetralin

Last Answer : Decalin

Partial hydrogenation of vegetable oils in the presence of Ni catalyst at 200°C gives (a) Vanaspati ghee (b) Margarine (c) Both of these (d) None of these

Description : Partial hydrogenation of vegetable oils in the presence of Ni catalyst at 200°C gives (a) Vanaspati ghee (b) Margarine (c) Both of these (d) None of these

Last Answer : Vanaspati ghee

Catalyst used in conversion of n-hexane into benzene in:

Description : Catalyst used in conversion of n-hexane into benzene in:

Last Answer : Catalyst used in conversion of n-hexane into benzene in: A. `AlCl_(3)` B. `SiO_(2)-Al_(2)O_(3)` C. `Cr_(r)O_(3)-Al_(2)O_(3)` D. `MnO_(2)`