Out of the following, TLV of __________ is maximum (about 500 ppm). (A) Carbon dioxide (B) Toluene (C) Carbon disulphide (D) Acetaldehyde

Out of the following, TLV of __________ is maximum (about 500 ppm).
(A) Carbon dioxide
(B) Toluene
(C) Carbon disulphide
(D) Acetaldehyde
by

1 Answer

Answer :

(A) Carbon dioxide
by

Related questions

Threshold Limit Value (TLV) is the maximum allowable concentration (i.e. safe limit) of pollutants in air. Safe limit for SO2 in air is __________ ppm. (A) 5 (B) 500 (C) 1000 (D) 2000

Description : Threshold Limit Value (TLV) is the maximum allowable concentration (i.e. safe limit) of pollutants in air. Safe limit for SO2 in air is __________ ppm. (A) 5 (B) 500 (C) 1000 (D) 2000

Last Answer : (A) 5

TLV of ammonia, nitrogen dioxide and phenol vapor in air is __________ ppm. (A) 5 (B) 100 (C) 1000 (D) 2000

Description : TLV of ammonia, nitrogen dioxide and phenol vapor in air is __________ ppm. (A) 5 (B) 100 (C) 1000 (D) 2000

Last Answer : (A) 5

A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000

Description : A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000

Last Answer : (D) 10000 to 100000

Threshold limit value (TLV) means maximum permissible/acceptable concentration. TLV of phosgene in air is about __________ ppm (parts per million). (A) 0.002 (B) 0.2 (C) 1.2 (D) 4.8

Description : Threshold limit value (TLV) means maximum permissible/acceptable concentration. TLV of phosgene in air is about __________ ppm (parts per million). (A) 0.002 (B) 0.2 (C) 1.2 (D) 4.8

Last Answer : (B) 0.2

Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Description : Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Last Answer : (A) < 1

Presence of carbon monoxide in atmosphere produced by decomposition of chlorophyll and haemoglobin breakdown of some animals, beyond TLV (>50 ppm) (A) Acts as a green house gas thereby raising earth's temperature (B) Causes asphyxia (C) Causes increase in sea level (D) Enhances the green house effect

Description : Presence of carbon monoxide in atmosphere produced by decomposition of chlorophyll and haemoglobin breakdown of some animals, beyond TLV (>50 ppm) (A) Acts as a green house gas thereby raising earth's ... (B) Causes asphyxia (C) Causes increase in sea level (D) Enhances the green house effect

Last Answer : (B) Causes asphyxia

Safe limit' called Threshold Limit Value (TLV) of carbon monoxide in atmospheric air is < 50 ppm. The main source of carbon monoxide pollutant in air is the (A) Industrial chimney exhaust (B) Automobiles exhaust (C) Photochemical reaction in polluted atmosphere (D) Burning of domestic fuel

Description : Safe limit' called Threshold Limit Value (TLV) of carbon monoxide in atmospheric air is < 50 ppm. The main source of carbon monoxide pollutant in air is the (A) Industrial chimney exhaust (B) Automobiles exhaust (C) Photochemical reaction in polluted atmosphere (D) Burning of domestic fuel

Last Answer : (B) Automobiles exhaust

From pollution control point of view, the maximum permissible concentration of sulphur dioxide in atmospheric air is about __________ ppm. (A) 5 (B) 50 (C) 500 (D) 5000

Description : From pollution control point of view, the maximum permissible concentration of sulphur dioxide in atmospheric air is about __________ ppm. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (A) 5

Out of the following, TLV of __________ is the minimum (about 0.02 ppm). (A) Phosgene (B) Bromine (C) MIC (Methyl isocyanate) (D) Ozone

Description : Out of the following, TLV of __________ is the minimum (about 0.02 ppm). (A) Phosgene (B) Bromine (C) MIC (Methyl isocyanate) (D) Ozone

Last Answer : (C) MIC (Methyl isocyanate)

A minimum boiling azeotrope is exemplified by (A) Toluene-benzene (B) Acetone-carbon disulphide (C) Water-isobutyl alcohol (D) None of these

Description : A minimum boiling azeotrope is exemplified by (A) Toluene-benzene (B) Acetone-carbon disulphide (C) Water-isobutyl alcohol (D) None of these

Last Answer : (B) Acetone-carbon disulphide

TLV of ozone (O3 ) and phosgene (COCl2 ) in air is __________ ppm. (A) 0.1 (B) 25 (C) 100(D) 1000

Description : TLV of ozone (O3 ) and phosgene (COCl2 ) in air is __________ ppm. (A) 0.1 (B) 25 (C) 100 (D) 1000

Last Answer : (A) 0.1

TLV of mercury in potable (drinking) water is about __________ ppm. (A) 0.001 (B) 0.1 (C) 1 (D) 5

Description : TLV of mercury in potable (drinking) water is about __________ ppm. (A) 0.001 (B) 0.1 (C) 1 (D) 5

Last Answer : (A) 0.001

Permissible safe limit (TLV) of __________ toxic gas is 100-1000 parts per million (ppm). (A) Highly (B) Moderately (C) Extremely (D) Very extremely

Description : Permissible safe limit (TLV) of __________ toxic gas is 100-1000 parts per million (ppm). (A) Highly (B) Moderately (C) Extremely (D) Very extremely

Last Answer : (B) Moderately

Threshold limit value (TLV) of CO in air is __________ ppm. (A) 5 (B) 50 (C) 2000 (D) 5000

Description : Threshold limit value (TLV) of CO in air is __________ ppm. (A) 5 (B) 50 (C) 2000 (D) 5000

Last Answer : (B) 50

TLV of lead for public sewer/waste water is about __________ ppm. (A) 1 (B) 25 (C) 150 (D) 650

Description : TLV of lead for public sewer/waste water is about __________ ppm. (A) 1 (B) 25 (C) 150 (D) 650

Last Answer : (A) 1

TLV of NO2 & NO exposure for the human being is 5 & 25 ppm respectively. Prolonged exposure of human being to NO2 causes (A) Skin disorder (B) Bronchitis (C) Bone disease (D) Cancer

Description : TLV of NO2 & NO exposure for the human being is 5 & 25 ppm respectively. Prolonged exposure of human being to NO2 causes (A) Skin disorder (B) Bronchitis (C) Bone disease (D) Cancer

Last Answer : (B) Bronchitis

Which of the following causes death by asphyxiation, if its presence inatmospheric air exceeds maximum allowable concentration (i.e. > 50 ppm)?(A) Benzopyrene(B) Peroxyacetyl nitrate(C) Carbon monoxide(D) Sulphur dioxide

Description : Which of the following causes death by asphyxiation, if its presence inatmospheric air exceeds maximum allowable concentration (i.e. > 50 ppm)? (A) Benzopyrene (B) Peroxyacetyl nitrate (C) Carbon monoxide (D) Sulphur dioxide

Last Answer : (C) Carbon monoxide

If carbon monoxide content in atmospheric air exceeds __________ ppm, death is bound to occur. (A) 50 (B) 500 (C) 1000 (D) 3000 (i.e. 0.3%

Description : If carbon monoxide content in atmospheric air exceeds __________ ppm, death is bound to occur. (A) 50 (B) 500 (C) 1000 (D) 3000 (i.e. 0.3%

Last Answer : (D) 3000 (i.e. 0.3%

Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons (b) permission to use only pure diesel with a maximum of 500 ppm sulphur as fuel for vehicles (c) use of non-polluting compressed natural gas (CNG) only as fuel by all buses and trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Description : Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and ... trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Last Answer : (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons

Blood analysis of a patient reveals an unusually high quantity of carboxyhaemoglobin content. Which of the following conclusions is most likely to be correct? The patient has been inhaling polluted air containing unusually high content of (a) carbon disulphide (b) chloroform (c) carbon dioxide (d) carbon monoxide.

Description : Blood analysis of a patient reveals an unusually high quantity of carboxyhaemoglobin content. Which of the following conclusions is most likely to be correct? The patient has been inhaling polluted air ... content of (a) carbon disulphide (b) chloroform (c) carbon dioxide (d) carbon monoxide.

Last Answer : (d) carbon monoxide.

As per the world health organisation (WHO) specification, the maximum permissible concentration (i.e., TLV) of particulate matter in air is __________ μg/m3 .(μg-microgram) (A) 10 (B) 90 (C) 800 (D) 750

Description : As per the world health organisation (WHO) specification, the maximum permissible concentration (i.e., TLV) of particulate matter in air is __________ μg/m3 .(μg-microgram) (A) 10 (B) 90 (C) 800 (D) 750

Last Answer : (B) 90

Maximum permissible concentration (i.e. TLV) of DDT in public water supply system is __________ micro gram (μ g)/litre. (A) 22 (B) 42 (C) 332 (D) 1050

Description : Maximum permissible concentration (i.e. TLV) of DDT in public water supply system is __________ micro gram (μ g)/litre. (A) 22 (B) 42 (C) 332 (D) 1050

Last Answer : (B) 42

Dissolved oxygen content in river water is around __________ ppm. (A) 5 (B) 100 (C) 250 (D) 500

Description : Dissolved oxygen content in river water is around __________ ppm. (A) 5 (B) 100 (C) 250 (D) 500

Last Answer : (A) 5

For existence of aquatic life in water, the dissolved oxygen content in it, should not be less than __________ ppm. (A) 10000 (B) 5 (C) 500 (D) 1000

Description : For existence of aquatic life in water, the dissolved oxygen content in it, should not be less than __________ ppm. (A) 10000 (B) 5 (C) 500 (D) 1000

Last Answer : (B) 5

Sea water contains about __________ ppm of bromine. (A) 5 (B) 70 (C) 500 (D) 1700

Description : Sea water contains about __________ ppm of bromine. (A) 5 (B) 70 (C) 500 (D) 1700

Last Answer : (B) 70

Which of the following binary systems is an example of a maximum boiling azeotrope? (A) Water-hydrochloric acid (B) Acetone-carbon disulphide (C) Water-ethyl alcohol (D) n-heptane-n-octane

Description : Which of the following binary systems is an example of a maximum boiling azeotrope? (A) Water-hydrochloric acid (B) Acetone-carbon disulphide (C) Water-ethyl alcohol (D) n-heptane-n-octane

Last Answer : (A) Water-hydrochloric acid

The average concentration of carbon dioxide in the atmosphere is : (A) 0.03 ppm (B) 30 ppm (C)0.3 ppm (D) 300 ppm

Description : The average concentration of carbon dioxide in the atmosphere is : (A) 0.03 ppm (B) 30 ppm (C)0.3 ppm (D) 300 ppm

Last Answer : (B) 30 ppm

The average concentration of carbon dioxide in the atmosphere is : (A) 0.03 ppm (B) 30 ppm (C)0.3 ppm (D) 300 ppm

Description : The average concentration of carbon dioxide in the atmosphere is : (A) 0.03 ppm (B) 30 ppm (C)0.3 ppm (D) 300 ppm

Last Answer : (D) 300 ppm

The present level of carbon-dioxide in atmosphere is : (A)190 ppm (B) 295 – 300 ppm (C) 420 – 460 ppm (D) 490 ppm

Description : The present level of carbon-dioxide in atmosphere is : (A)190 ppm (B) 295 – 300 ppm (C) 420 – 460 ppm (D) 490 ppm

Last Answer : (B) 295 – 300 ppm

Carbon dioxide is an important greenhouse gas. What is the current rate in parts per million per year of atmospheric increase of this gas? w) 0.15 ppm per year (parts per million) x) 1.5 ppm per year y) 15 ppm per year z) 150 ppm per year

Description : Carbon dioxide is an important greenhouse gas. What is the current rate in parts per million per year of atmospheric increase of this gas? w) 0.15 ppm per year (parts per million) x) 1.5 ppm per year y) 15 ppm per year z) 150 ppm per year 

Last Answer : ANSWER: X -- 1.5 PPM PER YEAR 

Tolerable concentration of toxic carbon monoxide in atmospheric air is about __________ ppm. (A) 50 (B) 1000 (C) 5000 (D) 10000

Description : Tolerable concentration of toxic carbon monoxide in atmospheric air is about __________ ppm. (A) 50 (B) 1000 (C) 5000 (D) 10000

Last Answer : (A) 50

TLV of aldrin in public water supply system is about __________ μg/litre. (A) 0.5 (B) 17 (C) 357 (D) 1097

Description : TLV of aldrin in public water supply system is about __________ μg/litre. (A) 0.5 (B) 17 (C) 357 (D) 1097

Last Answer : (B) 17

Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Description : Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Last Answer : (B) 10

Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Description : Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Last Answer : (D) 5000

Unreacted core model' represents the reaction involving (A) Combustion of coal particles (B) Roasting of sulphide ores (C) Manufacture of carbon disulphide from elements (D) None of these

Description : Unreacted core model' represents the reaction involving (A) Combustion of coal particles (B) Roasting of sulphide ores (C) Manufacture of carbon disulphide from elements (D) None of these

Last Answer : (B) Roasting of sulphide ores

Calcareous & argillaceous materials are used in the manufacture of (A) Lead (B) Cement (C) Carbon disulphide (D) None of these

Description : Calcareous & argillaceous materials are used in the manufacture of (A) Lead (B) Cement (C) Carbon disulphide (D) None of these

Last Answer : (B) Cement

Which allotrope of sulphur is insoluble in carbon disulphide? (A) Rhombic sulphur (B) Monoclinic sulphur (C) Plastic sulphur (D) Milk of sulphur

Description : Which allotrope of sulphur is insoluble in carbon disulphide? (A) Rhombic sulphur (B) Monoclinic sulphur (C) Plastic sulphur (D) Milk of sulphur

Last Answer : (C) Plastic sulphur

Carbon disulphide is mainly used in the production of(A) Viscose rayon(B) Corundum(C) Plasticiser for unsaturated polyester(D) Paints

Description : Carbon disulphide is mainly used in the production of(A) Viscose rayon (B) Corundum (C) Plasticiser for unsaturated polyester (D) Paints

Last Answer : (A) Viscose rayon

Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Description : Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Last Answer : (B) Phenol & formaldehyde

Acetaldehyde is shipped in __________ drums. (A) Cast iron (B) Steel (C) Aluminium (D) Either (B) & (C)

Description : Acetaldehyde is shipped in __________ drums. (A) Cast iron (B) Steel (C) Aluminium (D) Either (B) & (C)

Last Answer : (D) Either (B) & (C)

A 500 g toothpaste sample has 0.4 g fluoride concentration. The fluoride concentration in terms of ppm will be

Description : A 500 g toothpaste sample has 0.4 g fluoride concentration. The fluoride concentration in terms of ppm will be

Last Answer : A 500 g toothpaste sample has 0.4 g fluoride concentration. The fluoride concentration in terms of ppm will be A. 200 B. 400 C. 500 D. 800

Phenol reacts with bromine in carbon disulphide at low temperature to give

Description : Phenol reacts with bromine in carbon disulphide at low temperature to give

Last Answer : Phenol reacts with bromine in carbon disulphide at low temperature to give A. m-bromophenol B. o-and p ... C. p-bromophenol D. 2, 4,6-tribromophenol

Bitumen may be dissolved in (A) Carbondioxide (B) Water (C) Sodium chloride (D) Carbon disulphide

Description : Bitumen may be dissolved in (A) Carbondioxide (B) Water (C) Sodium chloride (D) Carbon disulphide

Last Answer : Answer: Option D

On prolonged exposure to high concentration of carbon monoxide (> 5000 ppm), man dies because (A) Of clotting of blood(B) Of jamming of respiratory tract(C) It forms carboxyhemoglobin by combining with haemoglobin of blood,thereby making it incapable of absorbing oxygen(D) It forms CO2 by combining with oxygen present in the blood

Description : On prolonged exposure to high concentration of carbon monoxide (> 5000 ppm), man dies because (A) Of clotting of blood (B) Of jamming of respiratory tract (C) It forms carboxyhemoglobin by combining ... it incapable of absorbing oxygen (D) It forms CO2 by combining with oxygen present in the blood

Last Answer : (C) It forms carboxyhemoglobin by combining with haemoglobin of blood, thereby making it incapable of absorbing oxygen

An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the distance between adjacent carbon atoms is 1.39Å (intermediate between single and double bond lengths). The evidence suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Description : An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the ... suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Last Answer : Benzene

An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the distance between adjacent carbon atoms is 1.39Å (intermediate between single and double bond lengths). The evidence suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Description : An organic compound (A) has a molecular weight 78 and an empirical formula CH. (A) is resistant to attack by oxidizing agents but undergoes substitution and addition reactions. X-ray analysis shows that the ... suggests that compound (A) is (a) Benzene (b) Cyclohexane (c) Toluene (d) n-Hexane

Last Answer : Benzene

Ethyl mercaptan is added to the Doctor negative LPG for facilitating the detection of its leakage (by bad odour) to the extent of about __________ ppm. (A) 1 (B) 50 (C) 5000 (D) 10000

Description : Ethyl mercaptan is added to the Doctor negative LPG for facilitating the detection of its leakage (by bad odour) to the extent of about __________ ppm. (A) 1 (B) 50 (C) 5000 (D) 10000

Last Answer : (B) 50

Tolerable limit of nitrogen oxides in air is __________ ppm. (A) 0.1 (B) 1 (C) 5 (D) 25

Description : Tolerable limit of nitrogen oxides in air is __________ ppm. (A) 0.1 (B) 1 (C) 5 (D) 25

Last Answer : (C) 5

Death may occur, when SO2 concentration in atmospheric air exceeds __________ ppm.(A) 20 (B) 100 (C) 400 (D) 200

Description : Death may occur, when SO2 concentration in atmospheric air exceeds __________ ppm. (A) 20 (B) 100 (C) 400 (D) 200

Last Answer : (C) 400