Height of coke oven is limited (say maximum upto 7 metres) mainly by the(A) Problem of uniform heating along its height(B) Structural strength of silica bricks(C) Problem in door cleaning(D) Buckling of ram of pusher car at the time of coke pushing

Height of coke oven is limited (say maximum upto 7 metres) mainly by
the
(A) Problem of uniform heating along its height
(B) Structural strength of silica bricks
(C) Problem in door cleaning
(D) Buckling of ram of pusher car at the time of coke pushing
by

1 Answer

Answer :

(A) Problem of uniform heating along its height
by

Related questions

Width of the coke oven towards coke side is slightly more than that on pusher side to (A) Facilitate easy discharging of coke as it swells during carbonisation (B) Facilitate uniform heating of the oven (C) Increase the output of the coke (D) None of these

Description : Width of the coke oven towards coke side is slightly more than that on pusher side to (A) Facilitate easy discharging of coke as it swells during carbonisation (B) Facilitate uniform heating of the oven (C) Increase the output of the coke (D) None of these

Last Answer : (A) Facilitate easy discharging of coke as it swells during carbonisation

Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Description : Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Last Answer : (A) Silica

The silica is used for preparing (A) Silica bricks (B) Coke oven (C) Lining for glass furnaces (D) All of these

Description : The silica is used for preparing (A) Silica bricks (B) Coke oven (C) Lining for glass furnaces (D) All of these

Last Answer : Answer: Option D

Beehive coke ovens are made of __________ bricks.(A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum

Description : Beehive coke ovens are made of __________ bricks. (A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum

Last Answer : (A) Silica

Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Description : Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Last Answer : (B) Takes 2-3 days for coking of coal but requires no external fuel for heating

Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Description : Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Last Answer : (B) Adsorption on bog iron bed

Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)

Description : Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)

Last Answer : (D) Bog iron (i.e., moist ferric hydroxide)

In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material (D) None of these

Description : In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By ... material (like chequor bricks) and then heating the air from this hot material (D) None of these

Last Answer : (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material

Reheating furnace (pusher type) is used for heating (A) Ingots (B) Slabs (C) Steel coils (D) Steel sheets

Description : Reheating furnace (pusher type) is used for heating (A) Ingots (B) Slabs (C) Steel coils (D) Steel sheets

Last Answer : (B) Slabs

Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

. An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Description : . An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Last Answer : (A) Blast furnace stoves

Blast furnace coke is made from coal by (A) Low temperature carbonisation (B) High temperature carbonisation (C) Medium temperature carbonisation (D) Heating the coal in an oven in presence of air

Description : Blast furnace coke is made from coal by (A) Low temperature carbonisation (B) High temperature carbonisation (C) Medium temperature carbonisation (D) Heating the coal in an oven in presence of air

Last Answer : (B) High temperature carbonisation

Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Description : Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Last Answer : (C) Coke oven battery heating

Coke oven gas consists mainly of (A) H2 & CH4 (B) CO & CO2 (C) H2 & CO (D) CH4 & CO

Description : Coke oven gas consists mainly of (A) H2 & CH4 (B) CO & CO2 (C) H2 & CO (D) CH4 & CO

Last Answer : (A) H2 & CH4

Coke oven gas constitutes mainly of (A) H2 & CO (B) H2 & CH4 (C) CH4 & CO (D) H2 & CO2

Description : Coke oven gas constitutes mainly of (A) H2 & CO (B) H2 & CH4 (C) CH4 & CO (D) H2 & CO2

Last Answer : (B) H2 & CH4

Coke oven gas consists mainly of (A) H2 , & CH4 (B) CO, & CO2 (C) H2 , & CO (D) CH4 , & CO

Description : Coke oven gas consists mainly of (A) H2 , & CH4 (B) CO, & CO2 (C) H2 , & CO (D) CH4 , & CO

Last Answer : (A) H2 , & CH4

Absorptivity of a perfect black body is unity. Which of the following has maximum absorptivity? (A) Aluminium foil (B) Refractory bricks (C) Iron plate (D) Coke breeze

Description : Absorptivity of a perfect black body is unity. Which of the following has maximum absorptivity? (A) Aluminium foil (B) Refractory bricks (C) Iron plate (D) Coke breeze

Last Answer : (D) Coke breeze

High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Description : High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Last Answer : (A) Are soft & friable (poor strength and size stability)

Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Description : Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Last Answer : Option C

For maximum discharge through a chimney, its height should be (A) 200 meters (B) Infinitely long (C) More than 105.7 metres (D) Equal to the height of the hot gas column producing draught

Description : For maximum discharge through a chimney, its height should be (A) 200 meters (B) Infinitely long (C) More than 105.7 metres (D) Equal to the height of the hot gas column producing draught

Last Answer : (D) Equal to the height of the hot gas column producing draught

The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage of the point with no filling or cutting is (A) (6 + 15) chains (B) (6 + 12) chains (C) (6 + 18) chains (D) None of these

Description : The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage ... 15) chains (B) (6 + 12) chains (C) (6 + 18) chains (D) None of these

Last Answer : (B) (6 + 12) chains

A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A × d × a × 2g) (B) 2A × d × a × 2g) (C) 2A × - d × a × 2g) (D) 2A × 3/2 - 3/2)/Cd × a × 2g)

Description : A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A d a 2g) (B) 2A d ... 2g) (C) 2A - d a 2g) (D) 2A 3/2 - 3/2)/Cd a 2g)

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) The structural member subjected to compression and whose dimensions are small as compared to its length, is called a stmt (B) The vertical compression members are generally known as columns or stanchions (C) Deflection in lateral direction of a long column, is generally known as buckling (D) All the above

Description : Pick up the correct statement from the following:  (A) The structural member subjected to compression and whose dimensions are small as  compared to its length, is called a stmt  (B) The ... in lateral direction of a long column, is generally known as buckling  (D) All the above

Last Answer : (D) All the above

Which of the following gas is mostly used in town for street and domestic lighting and heating?  A. Producer gas  B. Coal gas  C. Mond gas  D. Coke oven gas

Description : Which of the following gas is mostly used in town for street and domestic lighting and heating?  A. Producer gas  B. Coal gas  C. Mond gas  D. Coke oven gas

Last Answer : Answer: B

Pick up the correct statement from the following: (A) The plywoods do not split or crack due to changes in atmosphere (B) The commercial plywoods are available upto 150 cm wide and upto 300 cm long (C) The plywoods possess uniform tensile strength in all directions (D) All the above

Description : Pick up the correct statement from the following: (A) The plywoods do not split or crack due to changes in atmosphere (B) The commercial plywoods are available upto 150 cm wide and upto 300 cm long (C) The plywoods possess uniform tensile strength in all directions (D) All the above

Last Answer : Answer: Option D

The purpose of providing expansion bellows in the shell of tubular exchanger is to (A) Increase the heating load (B) Impart structural strength(C) Account for the uneven expansion of shell and tube bundles(D) Facilitate increase of shell length, if needed

Description : The purpose of providing expansion bellows in the shell of tubular exchanger is to (A) Increase the heating load (B) Impart structural strength (C) Account for the uneven expansion of shell and tube bundles (D) Facilitate increase of shell length, if needed

Last Answer : (C) Account for the uneven expansion of shell and tube bundles

A man was pushing his car along the road when he comes to a hotel. He shouts 'I'm bankrupt!' Why did the man shout that out? -Riddles

Description : A man was pushing his car along the road when he comes to a hotel. He shouts 'I'm bankrupt!' Why did the man shout that out? -Riddles

Last Answer : Because he was playing Monopoly.

A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Description : A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 percent (C) Roughly 1 to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Description : Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 ... to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Last Answer : Answer: Option D

Excess of silica in brick earth results in (A) Cracking and warping of bricks (B) Loss of cohesion (C) Enhancing the impermeability of bricks (D) None of the above

Description : Excess of silica in brick earth results in (A) Cracking and warping of bricks (B) Loss of cohesion (C) Enhancing the impermeability of bricks (D) None of the above

Last Answer : Answer: Option B

With increase in the time of carbonisation at a particular temperature(say 1000°C), the __________ percentage in coke oven gas increases. (A) Hydrogen (B) Methane (C) Unsaturated hydrocarbons (D) All (A), (B) and (C)

Description : With increase in the time of carbonisation at a particular temperature(say 1000°C), the __________ percentage in coke oven gas increases. (A) Hydrogen (B) Methane (C) Unsaturated hydrocarbons (D) All (A), (B) and (C)

Last Answer : (A) Hydrogen

Which of the following would require maximum amount of % excess air for complete combustion? (A) Coke oven gas (B) Furnace oil (C) Pulverised coal (D) Lump coal (fixed on chain grate)

Description : Which of the following would require maximum amount of % excess air for complete combustion? (A) Coke oven gas (B) Furnace oil (C) Pulverised coal (D) Lump coal (fixed on chain grate)

Last Answer : (D) Lump coal (fixed on chain grate)

. Which of the following fuel gases contains maximum amount of carbon monoxide? (A) Coke oven gas (B) Water gas (C) Blast furnace gas (D) L.D. converter gas

Description : . Which of the following fuel gases contains maximum amount of carbon monoxide? (A) Coke oven gas (B) Water gas (C) Blast furnace gas (D) L.D. converter gas

Last Answer : (D) L.D. converter gas

Safe condition for storage of high V.M. bituminous coal is that (A) Height of the coal heap should be < 3 metres (B) Maximum 200 tons should be stored in a heap (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Safe condition for storage of high V.M. bituminous coal is that (A) Height of the coal heap should be < 3 metres (B) Maximum 200 tons should be stored in a heap (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Electric furnace method for production of phosphorous uses phosphate rock and __________ (A) Phosphoric acid (B) Coke (C) Sulphuric acid (D) Silica and coke

Description : Electric furnace method for production of phosphorous uses phosphate rock and __________ (A) Phosphoric acid (B) Coke (C) Sulphuric acid (D) Silica and coke

Last Answer : (D) Silica and coke

__________ is used as a flux in the smelting of copper ore like chalcopyrite. (A) Coke breeze (B) Lime powder (C) Silica/quartz (D) Dolomite

Description : __________ is used as a flux in the smelting of copper ore like chalcopyrite. (A) Coke breeze (B) Lime powder (C) Silica/quartz (D) Dolomite

Last Answer : (C) Silica/quartz

The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending strength and axial yield strength of material (c) Buckling strength based on the net area of the section and percentage elongation at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Auger boring (A) Is the most primitive method for making a hole in the ground (B) Is generally employed in cohesive and other self soils above water table (C) Is most economical upto a depth of 5 metres (D) All the above

Description : Auger boring (A) Is the most primitive method for making a hole in the ground (B) Is generally employed in cohesive and other self soils above water table (C) Is most economical upto a depth of 5 metres (D) All the above

Last Answer : Answer: Option D

Open test pit is only suitable upto a depth of (A) 2 metres (B) 2.5 metres (C) 3 metres (D) None of the above

Description : Open test pit is only suitable upto a depth of (A) 2 metres (B) 2.5 metres (C) 3 metres (D) None of the above

Last Answer : Option C

In the UK wholesaling is not as important in consumer markets. This is MAINLY because: A)manufacturers prefer to deal direct with retailers B)of the strength of large national retailers C)wholesaling costs are higher in the UK than elsewhere D)UK wholesalers provide a more limited range of services than in other European markets.

Description : In the UK wholesaling is not as important in consumer markets. This is MAINLY because: A)manufacturers prefer to deal direct with retailers B)of the strength of large national retailers C) ... elsewhere D)UK wholesalers provide a more limited range of services than in other European markets.

Last Answer : B)of the strength of large national retailers

A man wished to move a block of size 3 m x 3 m weighing 80 kg. The coefficient of friction between the block and the ground is 0.27. Which of the following methods should be used? a.Slide along the ground by pushing b.Ask for cranes c.Pull it d.Tip it over e.Lift it bodily

Description : A man wished to move a block of size 3 m x 3 m weighing 80 kg. The coefficient of friction between the block and the ground is 0.27. Which of the following methods should be used? a.Slide along the ground by pushing b.Ask for cranes c.Pull it d.Tip it over e.Lift it bodily

Last Answer : d. Tip it over

A gradient along which the vehicle does not require any tractive effort to maintain a specified speed, is known as (A) Ruling gradient (B) Pushing gradient (C) Floating gradient (D) Minimum gradient

Description : A gradient along which the vehicle does not require any tractive effort to maintain a specified speed, is known as (A) Ruling gradient (B) Pushing gradient (C) Floating gradient (D) Minimum gradient

Last Answer : Answer: Option C

A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Description : A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis

Last Answer : (D) Bending stress is same at every section along its longitudinal axis

An example of an organism which uses biogenic silica as a structural material to construct

Description : An example of an organism which uses biogenic silica as a structural material to construct

Last Answer : skeletons is Diatoms, radiolarian and siliceous sponges.

An improved and fuel efficient version of the pusher type reheating furnace is the __________ furnace. (A) Walking beam (B) Shaft (C) Tunnel (D) Rotary hearth

Description : An improved and fuel efficient version of the pusher type reheating furnace is the __________ furnace. (A) Walking beam (B) Shaft (C) Tunnel (D) Rotary hearth

Last Answer : (A) Walking beam

Pickup the incorrect statement from the following: (A) The invert of pressure conduit is independent of the grade of the hydraulic gradient line (B) The pressure conduits may be taken uphill upto a maximum height of 8.3 m (C) Aqueducts and tunnels sections are generally kept circular (D) None of these

Description : Pickup the incorrect statement from the following:  (A) The invert of pressure conduit is independent of the grade of the hydraulic gradient line  (B) The pressure conduits may be taken uphill ... m  (C) Aqueducts and tunnels sections are generally kept circular  (D) None of these 

Last Answer : (D) None of these 

Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... D. `Cu_(2)O +FeO`(large amount).