Find the time constant for a R-C circuit for resistance R = 24 kohm and C = 16 microfarad. a) 1.5 millisecond b) 0.6 nanosecond c) 384 millisecond d) 384 microsecond

Find the time constant for a R-C circuit for resistance R = 24 kohm and C = 16
microfarad.
a) 1.5 millisecond
b) 0.6 nanosecond
c) 384 millisecond
d) 384 microsecond
by

1 Answer

Answer :

c) 384 millisecond
by

Related questions

Air blast circuit breakers for 400 kV power system are designed to operate in (a) 100 microsecond (b) 50 millisecond (c) 0.5 sec (d) 0.1 sec

Description : Air blast circuit breakers for 400 kV power system are designed to operate in (a) 100 microsecond (b) 50 millisecond (c) 0.5 sec (d) 0.1 sec

Last Answer : (b) 50 millisecond

Find the time constant of a capacitor with capacitance of 2 microfarad having an internal resistance of 4 megaohm. a) 2 b) 0.5 c) 8 d) 0.25

Description : Find the time constant of a capacitor with capacitance of 2 microfarad having an internal resistance of 4 megaohm. a) 2 b) 0.5 c) 8 d) 0.25

Last Answer : c) 8

Let the page fault service time be 10 millisecond(ms) in a computer with average memory access time being 20 nanosecond(ns). If one page fault is generated for every 106 memory accesses, what is the effective access time for memory? (A) 21 ns (B) 23 ns (C) 30 ns (D) 35 ns

Description : Let the page fault service time be 10 millisecond(ms) in a computer with average memory access time being 20 nanosecond(ns). If one page fault is generated for every 106 memory accesses, what is the effective access time for memory? (A) 21 ns (B) 23 ns (C) 30 ns (D) 35 ns

Last Answer : (C) 30 ns

Find the time constant in a series R-L circuit when the resistance is 4 ohm and the inductance is 2 H. a) 0.25 b) 0.2 c) 2 d) 0.5

Description : Find the time constant in a series R-L circuit when the resistance is 4 ohm and the inductance is 2 H. a) 0.25 b) 0.2 c) 2 d) 0.5

Last Answer : d) 0.5

Calculate potential of a metal plate of charge 28C and capacitance 12 mF. a) 3.33 kohm b) 2.33 kohm c) 3.33 Mohm d) 2.33 Mohm

Description : Calculate potential of a metal plate of charge 28C and capacitance 12 mF. a) 3.33 kohm b) 2.33 kohm c) 3.33 Mohm d) 2.33 Mohm

Last Answer : b) 2.33 kohm

A resistor value of colour code orange violet orange will be a) 37 kohm b) 37 Mohm c) 48 kohm d) 48 Mohm

Description : A resistor value of colour code orange violet orange will be a) 37 kohm b) 37 Mohm c) 48 kohm d) 48 Mohm

Last Answer : a) 37 kohm

If the values of C and R shown in the illustration were 1-microfarad and 3- Megohms respectively, which of the listed intervals would equal one 'time constant'? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Description : If the values of C and R shown in the illustration were 1-microfarad and 3- Megohms respectively, which of the listed intervals would equal one 'time constant'? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Last Answer : Answer: B

If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 100 kOhms, which of the listed time intervals would equal one 'time constant'? EL-0086 A. 0.1 second B. 0.2 second C. 0.5 second D. 5.0 seconds

Description : If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 100 kOhms, which of the listed time intervals would equal one 'time constant'? EL-0086 A. 0.1 second B. 0.2 second C. 0.5 second D. 5.0 seconds

Last Answer : Answer: A

What is the capacitive resistance of a 0.04 microfarad capacitor in ac circuit that has a frequency of 1000 hz?

Description : What is the capacitive resistance of a 0.04 microfarad capacitor in ac circuit that has a frequency of 1000 hz?

Last Answer : The capacitive reactance is approximately 4 kΩ .

What is the RC time constant of a series RC circuit that contains a 12-megohm resistor and a 12-microfarad capacitor?

Description : What is the RC time constant of a series RC circuit that contains a 12-megohm resistor and a 12-microfarad capacitor?

Last Answer : 144 seconds (t=R x C)

If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 3 Megohms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Description : If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 3 Megohms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Last Answer : Answer: D

The effective skin resistance of a material with conductivity 120 and skin depth of 2μm is a) 4.16 kilo ohm b) 4.16 mega ohm c) 41.6 kilo ohm d) 41.6 mega ohm

Description : The effective skin resistance of a material with conductivity 120 and skin depth of 2μm is a) 4.16 kilo ohm b) 4.16 mega ohm c) 41.6 kilo ohm d) 41.6 mega ohm

Last Answer : a) 4.16 kilo ohm

If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 100 kOhms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.1 second B. 0.2 second C. 0.5 second D. 5 seconds

Description : If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 100 kOhms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.1 second B. 0.2 second C. 0.5 second D. 5 seconds

Last Answer : Answer: C

An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Description : An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Last Answer : 50/(50+1k)*100 = 4.76%

Divide Rs 1728 among P, Q, R in such way that 8 times P's share is 12times Q's share and is 6 times R's share. How much does each get? A) Rs. 576,384,768 B) Rs. 588,392,484 C) Rs. 592, 384, 652 D) None of the above

Description : Divide Rs 1728 among P, Q, R in such way that 8 times P's share is 12times Q's share and is 6 times R's share. How much does each get? A) Rs. 576,384,768 B) Rs. 588,392,484 C) Rs. 592, 384, 652 D) None of the above

Last Answer : Answer: A)  Given, 8P=12Q=6R  4P=6Q=3R=>4P=6Q=>6/4Q=>P=3/2Q  6Q=3R R=6Q/3=2Q  Then, P+Q+R=1728  3/2Q+Q+2Q=1728  3Q+2Q+4Q=3456  9Q=3456  Q=384  P=3/2Q =3/2*384=576,R=2Q=768  A:B:C=576:384:768

The skin depth of a wave with phase constant of 12 units inside a conductor is a) 12 b) 1/12 c) 24 d) 1/24

Description : The skin depth of a wave with phase constant of 12 units inside a conductor is a) 12 b) 1/12 c) 24 d) 1/24

Last Answer : b) 1/12

Find the dielectric constant for a material with electric susceptibility of 4. a) 3 b) 5 c) 8 d) 16

Description : Find the dielectric constant for a material with electric susceptibility of 4. a) 3 b) 5 c) 8 d) 16

Last Answer : b) 5

What is the value of the capacitor in the astern valve position circuit shown in the illustration? EL-0099 A. 100 kFarad B. 0.5 microfarad C. 0.5 millifarad D. 50 kFarad

Description : What is the value of the capacitor in the astern valve position circuit shown in the illustration? EL-0099 A. 100 kFarad B. 0.5 microfarad C. 0.5 millifarad D. 50 kFarad

Last Answer : Answer: B

Find the resistance of a cylinder of area 200 units and length 100m with conductivity of 12 units. a) 1/24 b) 1/48 c) 1/12 d) 1/96

Description : Find the resistance of a cylinder of area 200 units and length 100m with conductivity of 12 units. a) 1/24 b) 1/48 c) 1/12 d) 1/96

Last Answer : a) 1/24

Compute the refractive index when the dielectric constant is 256 in air. a) 2562 b) 16 c) 256 d) 64

Description : Compute the refractive index when the dielectric constant is 256 in air. a) 2562 b) 16 c) 256 d) 64

Last Answer : b) 16

Find the electric flux density of a material whose charge density is given by 12 units in a volume region of 0.5 units. a) 12 b) 24 c) 6 d) 48

Description : Find the electric flux density of a material whose charge density is given by 12 units in a volume region of 0.5 units. a) 12 b) 24 c) 6 d) 48

Last Answer : c) 6

What is the impedance of a one microfarad capacitor at 60 Hertz: w) 16,700 ohms x) 2,650 ohms y) 3.8x10-4 ohms z) 6x10-5 ohms

Description : What is the impedance of a one microfarad capacitor at 60 Hertz: w) 16,700 ohms x) 2,650 ohms y) 3.8x10-4 ohms z) 6x10-5 ohms

Last Answer : ANSWER: X -- 2,650 OHMS

The electric flux density of a surface with permittivity of 2 is given by 12 units. What the flux density of the surface in air? a) 24 b) 6 c) 1/6 d) 0

Description : The electric flux density of a surface with permittivity of 2 is given by 12 units. What the flux density of the surface in air? a) 24 b) 6 c) 1/6 d) 0

Last Answer : b) 6

A infinite resistance is considered as a/an a) Closed path(short circuit) b) Open path c) Not defined d) Ammeter with zero reading

Description : A infinite resistance is considered as a/an a) Closed path(short circuit) b) Open path c) Not defined d) Ammeter with zero reading

Last Answer : b) Open path

The phase constant of a wave with wavelength 2 units is a) 6.28 b) 3.14 c) 0.5 d) 2

Description : The phase constant of a wave with wavelength 2 units is a) 6.28 b) 3.14 c) 0.5 d) 2

Last Answer : b) 3.14

The frequency in rad/sec of a wave with velocity of that of light and phase constant of 20 units is (in GHz) a) 6 b) 60 c) 600 d) 0.6

Description : The frequency in rad/sec of a wave with velocity of that of light and phase constant of 20 units is (in GHz) a) 6 b) 60 c) 600 d) 0.6

Last Answer : a) 6

Calculate the phase constant of a dielectric with frequency 6 x 10 6 in air. a) 2 b) 0.2 c) 0.02 d) 0.002

Description : Calculate the phase constant of a dielectric with frequency 6 x 10 6 in air. a) 2 b) 0.2 c) 0.02 d) 0.002

Last Answer : c) 0.02

Find the power of a wave given that the RMS value of E and H are 6 and 4.5 respectively. a) 24 b) 27 c) 29 d) 32

Description : Find the power of a wave given that the RMS value of E and H are 6 and 4.5 respectively. a) 24 b) 27 c) 29 d) 32

Last Answer : b) 27

Find the total flux in a material of flux density 15 units in an area of 24 units. a) 3.6 b) 7.2 c) 9.6 d) 5.4

Description : Find the total flux in a material of flux density 15 units in an area of 24 units. a) 3.6 b) 7.2 c) 9.6 d) 5.4

Last Answer : a) 3.6

Find the electric force when the charge of 2C is subjected to an electric field of 6 units. a) 6 b) 3 c) 12 d) 24

Description : Find the electric force when the charge of 2C is subjected to an electric field of 6 units. a) 6 b) 3 c) 12 d) 24

Last Answer : c) 12

Find the magnetic field intensity of a material with flux density of 24 units in air(in 10 6 order) a) 19.09 b) 21 c) 25 d) 26.78

Description : Find the magnetic field intensity of a material with flux density of 24 units in air(in 10 6 order) a) 19.09 b) 21 c) 25 d) 26.78

Last Answer : a) 19.09

Calculate the potential when a conductor of length 2m is having an electric field of 12.3units. a) 26.4 b) 42.6 c) 64.2 d) 24.6

Description : Calculate the potential when a conductor of length 2m is having an electric field of 12.3units. a) 26.4 b) 42.6 c) 64.2 d) 24.6

Last Answer : d) 24.6

Calculate the energy in an electric field with flux density 6 units and field intensity of 4 units. a) 12 b) 24 c) 36 d) 48

Description : Calculate the energy in an electric field with flux density 6 units and field intensity of 4 units. a) 12 b) 24 c) 36 d) 48

Last Answer : a) 12

The phase constant of a wave propagation with frequency of 35 radian/sec and time delay of 7.5 sec is a) 4.66 b) 262.5 c) 46.6 d) 26.25

Description : The phase constant of a wave propagation with frequency of 35 radian/sec and time delay of 7.5 sec is a) 4.66 b) 262.5 c) 46.6 d) 26.25

Last Answer : b) 262.5

In an field having a force of 12N and distance 20cm, the torque will be a) 0.24 b) 2.4 c) 24 d) 12/20

Description : In an field having a force of 12N and distance 20cm, the torque will be a) 0.24 b) 2.4 c) 24 d) 12/20

Last Answer : b) 2.4

Find the charge density when the electric flux density is given by 2x i + 3y j + 4z k. a) 10 b) 9 c) 24 d) 0

Description : Find the charge density when the electric flux density is given by 2x i + 3y j + 4z k. a) 10 b) 9 c) 24 d) 0

Last Answer : b) 9

Calculate the electric field intensity of a line charge of length 2m and potential 24V. a) 24 b) 12 c) 0.083 d) 12.67

Description : Calculate the electric field intensity of a line charge of length 2m and potential 24V. a) 24 b) 12 c) 0.083 d) 12.67

Last Answer : b) 12

Compute the loss factor when the loss tangent is 0.88 and the real part of dielectric is 24. a) 12.12 b) 12.21 c) 21.21 d) 21.12

Description : Compute the loss factor when the loss tangent is 0.88 and the real part of dielectric is 24. a) 12.12 b) 12.21 c) 21.21 d) 21.12

Last Answer : d) 21.12

If D = 2xy i + 3yz j + 4xz k, how much flux passes through x = 3 plane for which - 1<y<2 and 0<z<4? a) 12 b) 24 c) 36 d) 48

Description : If D = 2xy i + 3yz j + 4xz k, how much flux passes through x = 3 plane for which - 1

Last Answer : c) 36

Find the magnetization of the material with susceptibility of 6 units and magnetic field intensity of 13 units. a) 2.16 b) 6.2 c) 78 d) 1.3

Description : Find the magnetization of the material with susceptibility of 6 units and magnetic field intensity of 13 units. a) 2.16 b) 6.2 c) 78 d) 1.3

Last Answer : c) 78

Find the capacitance when charge is 20 C has a voltage of 1.2V. a) 32.67 b) 16.67 c) 6.67 d) 12.33

Description : Find the capacitance when charge is 20 C has a voltage of 1.2V. a) 32.67 b) 16.67 c) 6.67 d) 12.33

Last Answer : b) 16.67

Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 6m. a) 17/6 b) -17/6 c) 13/6 d) -13/6

Description : Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 6m. a) 17/6 b) -17/6 c) 13/6 d) -13/6

Last Answer : d) -13/6

Find the potential of V = 60sin θ/r 2 at P(3,60,25) a) 5.774 b) 6.774 c) 7.774 d) 8.774

Description : Find the potential of V = 60sin θ/r 2 at P(3,60,25) a) 5.774 b) 6.774 c) 7.774 d) 8.774

Last Answer : a) 5.774

how much zepto second in a nanosecond?

Description : how much zepto second in a nanosecond?

Last Answer : quadrillion

What is one nanosecond ?

Description : What is one nanosecond ?

Last Answer : 1 second means one part of one hundred crore.

Calculate the convection current when electron density of 200 units is travelling at a speed of 12m/s. a) 16.67 b) 2400 c) 2880 d) 0.0

Description : Calculate the convection current when electron density of 200 units is travelling at a speed of 12m/s. a) 16.67 b) 2400 c) 2880 d) 0.0

Last Answer : b) 2400

A point charge 2nC is located at origin. What is the potential at (1,0,0)? a) 12 b) 14 c) 16 d) 18

Description : A point charge 2nC is located at origin. What is the potential at (1,0,0)? a) 12 b) 14 c) 16 d) 18

Last Answer : d) 18

Find the value of divergence theorem for the field D = 2xy i + x 2 j for the rectangular parallelepiped given by x = 0 and 1, y = 0 and 2, z = 0 and 3. a) 10 b) 12 c) 14 d) 16 View An

Description : Find the value of divergence theorem for the field D = 2xy i + x 2 j for the rectangular parallelepiped given by x = 0 and 1, y = 0 and 2, z = 0 and 3. a) 10 b) 12 c) 14 d) 16

Last Answer : b) 12

Find the value of divergence theorem for the field D = 2xy i + x 2 j for the rectangular parallelepiped given by x = 0 and 1, y = 0 and 2, z = 0 and 3. a) 10 b) 12 c) 14 d) 16

Description : Find the value of divergence theorem for the field D = 2xy i + x 2 j for the rectangular parallelepiped given by x = 0 and 1, y = 0 and 2, z = 0 and 3. a) 10 b) 12 c) 14 d) 16

Last Answer : b) 12

Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 1m. a) 0 b) 1 c) 2 d) 3

Description : Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 1m. a) 0 b) 1 c) 2 d) 3

Last Answer : a) 0