Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Which of the following statement is incorrect?
a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line
b. HDLC is a standard synchronous communication protocol.
c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data
d. RTS/CTS is the way the terminal indicates ringing
by

1 Answer

Answer :

RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data
by

Related questions

Which of the following signal is not standard RS-232-C signal? a. VDR b. RTS c. CTS d. DSR

Description : Which of the following signal is not standard RS-232-C signal? a. VDR b. RTS c. CTS d. DSR

Last Answer : VDR

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

The RTS and CTS frames in CSMA/CA ____ solvethe hidden stationproblem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem. A) can; cannot B) cannot; can C) can; can D) cannot; cannot

Description : The RTS and CTS frames in CSMA/CA ____ solvethe hidden stationproblem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem. A) can; cannot B) cannot; can C) can; can D) cannot; cannot

Last Answer : can; cannot

High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half duplex line is a communication line in which data can move in two directions, but not at the same time. c. Teleprocessing combines telecommunications and DP techniques in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Last Answer : C. SLIP, PPP

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

_____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Description : _____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Last Answer : LLC

Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Description : Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Last Answer : d. all of the mentioned

Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Description : Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Last Answer : A. receive sliding window.

The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Description : The x.25 standard specifies a a. technique for start-stop data b. technique for dial access c. DTE/DCE interface d. data bit rate e. none of above

Last Answer : DTE/DCE interface

HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control

Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Description : Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Last Answer : c. Both CSMA/CD & CSMA/CA

Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for Modems) b. Frame Relay protocol as LAPF (Link Access Procedure for Frame Relay) c. ISDN (Integrated Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Last Answer : d. All the above

Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Description : Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Last Answer : C. Both CSMA/CD & CSMA/CA

Which type of Sframe in HDLC exhibit the correspondence of last three bits [N(R)] by defining the negative acknowledgement (NAK) number with the code value of '01'? a. Receive ready b. Receive not ready c. Reject d. Selective Reject

Description : Which type of Sframe in HDLC exhibit the correspondence of last three bits [N(R)] by defining the negative acknowledgement (NAK) number with the code value of '01'? a. Receive ready b. Receive not ready c. Reject d. Selective Reject

Last Answer : c. Reject

The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Description : The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Last Answer : D. Data terminal equipment (DTE)

A ______is the end-to-end portion of the network between two STS multiplexers. A) section B) line C) path D) none of the aboveC

Description : A ______is the end-to-end portion of the network between two STS multiplexers. A) section B) line C) path D) none of the above

Last Answer : path

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Description : The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Last Answer : they contain clock recovery circuits

A ________ is a set of rules that governs data communication. A) forum B) protocol C) standard D) none of the above

Description : A ________ is a set of rules that governs data communication. A) forum B) protocol C) standard D) none of the above

Last Answer : protocol

A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Description : A communications device that combines transmissions from several I/O devices into one line is a a. concentrator b. modifier c. multiplexer d. full-duplex line

Last Answer : multiplexer

If a firm wantedto transmit data from 1,000 punchedcards toa remote computer, they would use a(n) A. POS terminal B. data collection terminal C. batch processingterminal D. intelligent terminal E. None of the above

Description : If a firm wantedto transmit data from 1,000 punchedcards toa remote computer, they would use a(n) A. POS terminal B. data collection terminal C. batch processingterminal D. intelligent terminal E. None of the above

Last Answer : batch processingterminal

Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Description : Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Last Answer : d. all of the mentioned

Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Description : Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Last Answer : d. all of the mentioned

Transmission control protocol is a) connection oriented protocol b) uses a three way handshake to establish a connection c) recievs data from application as a single stream d) all of the mentioned

Description : Transmission control protocol is a) connection oriented protocol b) uses a three way handshake to establish a connection c) recievs data from application as a single stream d) all of the mentioned

Last Answer : d) all of the mentioned

The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : isochronous

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Description : A communication device that combines transmissions from several I/O devices into one line is a A) Concentrator B) Modifier C) Multiplexer D) Full duplex file

Last Answer : C) Multiplexer

Which of the following statement is correct? a. terminal section of a synchronous modem contains the scrambleb. receiver section of a synchronous modem contains the scrambler c. transmission section of a synchronous modem contains the scrambler d. control section of a synchronous modem contains the scrambler e. none of the abover

Description : Which of the following statement is correct? a. terminal section of a synchronous modem contains the scrambler b. receiver section of a synchronous modem contains the scrambler c. transmission section of ... d. control section of a synchronous modem contains the scrambler e. none of the above

Last Answer : transmission section of a synchronous modem contains the scrambler

A SONET system can use _________. A) STS multiplexers B) regenerators C) add/drop multiplexers D) all of theabove

Description : A SONET system can use _________. A) STS multiplexers B) regenerators C) add/drop multiplexers D) all of theabove

Last Answer : add/drop multiplexers

Which data communication method is used to transmit the data over a serial communication link? a. simplex b. half-duplex c. full-duplex d. b and c e. None of above

Description : Which data communication method is used to transmit the data over a serial communication link? a. simplex b. half-duplex c. full-duplex d. b and c e. None of above

Last Answer : full-duplex

In indication signal for a handshake form the DCE to the DTE in response to an active condition for the request to send a signal. A. Data transmission B. Clear to send C. Receive data D. Data set ready

Description : In indication signal for a handshake form the DCE to the DTE in response to an active condition for the request to send a signal. A. Data transmission B. Clear to send C. Receive data D. Data set ready

Last Answer : B. Clear to send

Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Description : Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Last Answer : Collision

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Last Answer : a. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received ... order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Last Answer : a. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Last Answer : A. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ a) all UDP packets are treated independently by transport layer b) it sends data as a stream of related packets c) it is received in the same order as sent order d) it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a) all UDP packets are treated independently by transport layer b) it sends data as a stream of related packets c) it is received in the same order as sent order d) it sends data very quickly

Last Answer : all UDP packets are treated independently by transport layer

State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and UDP. 3). SCTP is a new reliable, message oriented transport layer protocol. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and ... , 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : D. 1.false, 2. true, 3. true

State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been the mainstay for data communications. 3). Point-to-Point Protocol (PPP) is a network-specific standard protocol with STD number 51. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Description : State weather the following statement is true or false for Point-to-Point Protocol 1). It is still in widespread use for dial-up TCP/IP connections 2) Point-to-point circuits in the form of asynchronous lines have long been ... . false C. 1. false, 2. false, 3. false D. 1. true, 2. false, 3. true

Last Answer : D. 1. true, 2. false, 3. true

Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B is 128 kbps. What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Description : Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B ... What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Last Answer : b. 40

Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Description : Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Last Answer : B. Data communication equipment

An important terminal that is required between DTE and PSTN is (A) Server (B) MODEM (C) Relay (D) Network card

Description : An important terminal that is required between DTE and PSTN is (A) Server (B) MODEM (C) Relay (D) Network card

Last Answer : (B) MODEM

What is the full form of UDP a. Union Development Program b. User Data Program c. User Datagram Protocol d. Unified Datagram Provider

Description : What is the full form of UDP a. Union Development Program b. User Data Program c. User Datagram Protocol d. Unified Datagram Provider

Last Answer : c. User Datagram Protocol

What is the full form of UDP a. Union Development Program b. User Data Program c. User Datagram Protocol d. Unified Datagram Provider

Description : What is the full form of UDP a. Union Development Program b. User Data Program c. User Datagram Protocol d. Unified Datagram Provider

Last Answer : c. User Datagram Protocol

In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Description : In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Last Answer : equilizer

Which of the following is a transport layer protocol?a. stream control transmission protocol b. internet control message protocol c. neighbor discovery protocol d. dynamic host configuration protocol

Description : Which of the following is a transport layer protocol? a. stream control transmission protocol b. internet control message protocol c. neighbor discovery protocol d. dynamic host configuration protocol

Last Answer : a. stream control transmission protocol

Which one of the following is a version of UDP with congestion control? a. datagram congestion control protocol b. stream control transmission protocol c. structured stream transport d. user congestion control protocol

Description : Which one of the following is a version of UDP with congestion control? a. datagram congestion control protocol b. stream control transmission protocol c. structured stream transport d. user congestion control protocol

Last Answer : a. datagram congestion control protocol