Description : The system is said to be critically damped if the damping factor is A. Greater than one B. Equal to one C. Less than one D. Zero
Last Answer : B. Equal to one
Description : The damping factor is the measure of the relative amount of damping in the existing system with that necessary for the ______ system. (A) underdamped (B) overdamped (C) critical damped (D) all of the above
Last Answer : (C) critical damped
Description : If the damping factor for a vibrating system is unity, then the system will be (A) overdamped (B) underdamped (C) critically damped (D) without vibrations
Last Answer : (C) critically damped
Description : A system is said to be over damped if the damping factor for the system is A More than one B Less than one C Equal to one D Equal to zero
Last Answer : A More than one
Description : A system is said to be under damped if the damping factor for the system is A More than one B Less than one C Equal to one D Equal to zero
Last Answer : B Less than one
Description : In vibration isolation system, if ω/ωn < 2, then for all values of damping factor, the transmissibility will be A less than unity B equal to unity C greater than unity D zero
Last Answer : C greater than unity
Description : In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero
Last Answer : c) greater than unity
Description : n vibration isolation system, if ω/ω n is less than √2 , then for all values of the damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero
Description : A system is said to be critically damped if the damping factor for a vibrating system is A Zero B Less than one C One D More than one
Last Answer : C One
Description : In vibration isolation system, the transmissibility will be equal to unity, for all values of damping factor, if ω/ωn is A. Equal to 1 B. Equal to √2 C. Less than √2 D. Greater than √2
Last Answer : B. Equal to √2
Description : At which frequency ratio, phase angle increases as damping factor increases? A. When frequency ratio is less than unity B. When frequency ratio is more than unity C. When frequency ratio is zero D. All of the above
Last Answer : A. When frequency ratio is less than unity
Description : In case of viscous damping the frequency of damped vibration is A) Equal to that of undamped vibrations B) Less than that of undamped vibrations C) Greater than that of undamped vibrations D) Independent than that of undamped vibrations
Last Answer : B) Less than that of undamped vibrations
Description : If ωmax is the frequency at which the peak amplitude occurs and ωn is the natural frequency of the system then In a forced vibration system with damping, the higher the damping, A) More will be ... and ωmax is independent of damping in this system D) The difference between ωn and ωmax will be zero
Last Answer : A) More will be the difference between ωn and ωmax
Description : Which of the following is true regarding Ɛ>1? A. Transmitted force is greater than applied force B. Transmitted force is less than applied force C. Spring force is less than applied force D. Damping force is less than applied force
Last Answer : A. Transmitted force is greater than applied force
Description : Which of the following is true regarding Ɛ>1? a) Transmitted force is greater than applied force b) Transmitted force is less than applied force c) Spring force is less than applied force d) Damping force is less than applied forc
Last Answer : a) Transmitted force is greater than applied force
Description : What is meant by critical damping coefficient? * 1 point (A) Frequency of damped free vibrations is less than zero (B). The motion is a periodic in nature (C). Both a. and b. (D). None of the above
Last Answer : (C). Both a. and b.
Description : What is meant by critical damping coefficient? A Frequency of damped free vibrations is less than zero B The motion is aperiodic in nature C Both a. and b. D None of the above
Last Answer : B The motion is aperiodic in nature
Description : What is meant by critical damping coefficient? B ( A )Frequency of damped free vibrations is less than zero ( B )The motion is aperiodic in nature ( C )Both a. and b. (D)None of the above
Last Answer : ( B )The motion is aperiodic in nature
Description : What is meant by critical damping coefficient? a. Frequency of damped free vibrations is less than zero b. The motion is aperiodic in nature c. Both a. and b. d. None of the above
Last Answer : b. The motion is aperiodic in nature
Description : In coulomb damping the frequency of damped vibrations is A Equal to that of undamped vibrations B Less than that of undamped vibrationsC More than that of undamped vibrations D Independent of the frequency of undamped vibration
Last Answer : A Equal to that of undamped vibrations
Description : A vehicle suspension system consists of a spring and a damper. Stiffness of spring is 3.5 KN/m and damping constant of damper is 400Ns/m. If mass is 50 kg, then damping factor is A 0.606 B 0.10 C 0.666 D 0.471
Last Answer : D 0.471
Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 25.62 rad/sec B 20.78 rad/sec C 14.4 rad/sec D 15.33 rad/sec
Last Answer : A 25.62 rad/sec
Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz
Last Answer : B 25.62 rad/sec
Description : A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791
Last Answer : D 0.00791
Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and A natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. ( A )25.62 rad/sec ( B )20.78 rad/sec ( C )14.4 rad/sec ( D )15.33 rad/sec
Last Answer : ( A )25.62 rad/sec
Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... , are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz
Last Answer : a) 0.471 and 1.19 Hz
Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequ the system is 30 rad/sec which consists of machine supported on springs and dashpots. a. 25.62 rad/secb. 20.78 rad/sec c. 14.4 rad/sec d. 15.33 rad/sec
Last Answer : a. 25.62 rad/sec
Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... .19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz
Description : Unit of the damping factor is ______. (A) Nm/s (B) N/sm (C) N/m (D) none of the above
Last Answer : (D) none of the above
Description : A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and0.45 Hz in a viscous fluid medium. Find the damping factor. 0.5122 (B) 0.9272 (C) 0.4359 (D) 0.2568
Last Answer : (C) 0.4359
Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as A Damping factor B Damping coefficient C Logarithmic decrement D Magnification factor
Last Answer : D Magnification factor
Description : The ratio of the actual damping coefficient (c) to the critical damping coefficient (cc ) is known as _________ A Damping factor B Damping coefficient C Resistive factor D Resistive coefficient
Last Answer : A Damping factor
Description : Calculate logarithmic decrement if damping factor is 0.33. A 1.36 B 3.23 C 5.16D 2.19
Last Answer : D 2.19
Description : A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and 0.45Hz in a viscous fluid medium. Find the damping factor. A 0.5122 B 0.9237 C 0.4359 D 0.2568
Last Answer : C 0.4359
Description : Calculate logarithmic decrement if damping factor is 0.086 A 0.245 B 0.425 C 0.542 D 0.252
Last Answer : C 0.542
Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as A Logarithmic decrement B Magnification factor C Damping factor D None of the mentioned
Last Answer : B Magnification factor
Description : The ratio of actual damping coefficient to the critical damping coefficient is known as A Magnification Factor B Damping Factor C Logarithmic decrementD None of the mentioned
Last Answer : B Damping Factor
Description : Ratio of actual damping coefficient to critical damping coefficient is called A. Damping Factor B. Angular Factor C. Critical Factor D. None of above
Last Answer : A. Damping Factor
Description : The ratio of the actual damping coefficient (c) to the critical damping coefficient (cc ) is known as _________ ( A ) Damping factor ( B ) Damping coefficient ( C ) Resistive factor ( D ) Resistive coefficient
Last Answer : ( A ) Damping factor
Description : Calculate logarithmic decrement if damping factor is 0.33. D ( A ) 1.36 ( B ) 3.23 ( C ) 5.16 ( D ) 2.19
Last Answer : D ) 2.19
Description : The ratio of maximum displacement of the forced vibration to the deflection due to the static force, is known as A. Damping FactorB. Damping Coefficient C. Logarithmic Decrement D. Magnification Factor
Last Answer : D. Magnification Factor
Description : Damping factor, ε = A. C/Cc B. C.Cc C. K/m D. K.m
Last Answer : A. C/Cc
Description : Calculate logarithmic decrement if damping factor is 0.33. a. 1.36 b. 3.23 c. 5.16 d. 2.19
Last Answer : d. 2.19
Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) Damping factor b) Damping coefficient c) Logarithmic decrement d) Magnification factor
Last Answer : d) Magnification factor
Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as (A) damping factor (B) damping coefficient (C) logarithmic decrement (D) magnification factor
Last Answer : (D) magnification factor
Description : In which of the cases the factor c = 0? a) When there is damping b) No damping c) Resonance d) c is never 0
Last Answer : b) No damping
Description : Unit of damping factor is N/m/s. a) True b) False
Last Answer : b) False
Description : The ratio of the actual damping coefficient (c) to the critical damping coefficient (cc ) is known as _________ a) Damping factor b) Damping coefficient c) Resistive factor d) Resistive coefficient
Last Answer : a) Damping factor
Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) damping factor b) damping coefficient c) logarithmic decrement d) magnification factor
Last Answer : d) magnification factor