Description : . In centrifugal pendulum absorber , the natural frequency in cycle per second can be given by A Fn =N √(R/L) B Fn =1/N √(R/L) C Fn =N/2 √(R/L) D Fn =N2 √(R/L)
Last Answer : A Fn =N √(R/L)
Description : In centrifugal pendulum absorber , the natural frequency in cycle per second can be given by A) Fn =N √(R/L) B) Fn =1/N √(R/L) C) Fn =N/2 √(R/L) D) Fn =N2 √(R/L)
Last Answer : A) Fn =N √(R/L)
Description : Centrifugal absorber is used to reduce A) Centrifugal force in rotating system B) Torsional vibration of rotating system C) Vibration in linear system D) Transverse vibrations
Last Answer : B) Torsional vibration of rotating system
Description : Natural frequency of simple pendulum is proportional to A. Length B. Acceleration due to gravity C. Both D. None
Last Answer : B. Acceleration due to gravity
Description : The two resonant frequency ratio (ω/ ω2) in a dynamic vibration absorber system for a mass ratio 0.2 are given by A) 0 ; 1.0 B) 0.801 ; 1.248 C) 0.458 ; 1.124 D) 0.642 ; 1.558
Last Answer : B) 0.801 ; 1.248
Description : Which of the following condition should be satisfied in the design of a vibration absorber ? A) Natural frequency of the auxiliary system should be equal to the natural frequency of the main ... D) Natural frequency of the auxiliary system should be twice natural frequency of the main system
Last Answer : A) Natural frequency of the auxiliary system should be equal to the natural frequency of the main system
Description : SHM is the motion in which acceleration of the body is proportional to its displacement and directed towards the mean position. A. True B. False C. Neither True Nor False D. None
Last Answer : A. True
Description : In vibrometer, the relative motion between the mass and vibrating body is converted into proportional ________. (A) current (B) voltage (C) resistance (D) ampere
Last Answer : (B) voltage
Description : A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and0.45 Hz in a viscous fluid medium. Find the damping factor. 0.5122 (B) 0.9272 (C) 0.4359 (D) 0.2568
Last Answer : (C) 0.4359
Description : A simple pendulum is found to vibrate at a frequency of 0.5Hz in vacuum and 0.45Hz in a viscous fluid medium. Find the damping factor. A 0.5122 B 0.9237 C 0.4359 D 0.2568
Last Answer : C 0.4359
Description : Dynamic vibration absorber is suitable for A varying speed machines B constant speed machines C Zero speed range machines D None of the mentioned
Last Answer : B constant speed machines
Description : Dynamic vibration absorber is suitable for A) Constant speed machine B) Varying speed machine C) zero speed machine D) None of the above
Last Answer : A) Constant speed machine
Description : Dynamic vibration absorber is suitable for A. Constant speed machines B. Varying speed machines C. Zero speed range machines D. None of the above
Last Answer : A. Constant speed machines
Description : If the amplitude of harmonic motion is large, its frequency A) Will always be high B) Will always be less C) Can have any value D) Will be zero
Last Answer : C) Can have any value
Description : Which of the following statements is/are true? A. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B. Shaft vibrates with maximum frequency when rotors ... C. Zero node behavior is observed in rotors rotating in opposite direction D. All of the above
Last Answer : A. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction
Description : Which of the following statements is/are true? A) Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B) Shaft vibrates with maximum frequency when rotors ... C) Zero node behavior is observed in rotors rotating in opposite direction D) All of the above
Last Answer : A) Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction
Description : Which of the following statements is/are true? a. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction b. Shaft vibrates with maximum frequency when rotors ... c. Zero node behavior is observed in rotors rotating in opposite direction d. All of the above
Last Answer : a. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction
Description : Which of the following statements are TRUE for damped vibrations? (P) . For a system having critical damping, the value of the damping ratio is unity and system does not undergo a vibratory motion. (Q) . Logarithmic decrement method ... Q only (B) P and S only (C) P, Q and R only (D) Q and S only
Last Answer : (C) P, Q and R only
Description : When a rigid body is suspended vertically and it oscillates with a small amplitude under the action of the force of gravity, the body is known as * 1 point (A) simple pendulum (B) torsional pendulum (C) compound pendulum (D) second’s pendulum
Last Answer : (C) compound pendulum
Description : When a rigid body is suspended vertically and it oscillates with a small amplitude under the action of the force of gravity, the body is known as A. simple pendulum B. torsional pendulum C. compound pendulum D. second’s pendulum
Last Answer : C. compound pendulum
Description : The time period of a simple pendulum does not depend upon the mass of the body suspended at the free end of the string. This statement is known as ___________ . (A) law of gravity (B) law of mass (C) law of isochronism (D) law of length
Last Answer : (B) law of mass
Description : When a rigid body is suspended vertically and it oscillates with a small amplitude under the action of the force of gravity, the body is known as (A) simple pendulum B) torsional pendulum (C) compound pendulum (D) second’s pendulum
Description : When a body moves with simple harmonic motion, the product of its periodic time and frequency is equal to A. Zero B. One C. π/2 D. 2π
Last Answer : B. One
Description : Rotating shafts tends to vibrate violently in transverse directions at certain speed. This speed is called A Critical speedB Whipping speed C Whirling speed D All of the mentioned
Last Answer : D All of the mentioned
Description : Critical speed of shaft having a rotating disc in the middle is A) x/e = 1 / ( r^2 - 1 ) B) x/e = 1 / ( r^2 + 1 ) C) x/e = 1 / ( r^2 - 1^2 ) D) x/e = ( 1 + r) / ( r^2 – 1 )
Last Answer : A) x/e = 1 / ( r^2 - 1 )
Description : The rotating shaft or rotor vibrates with excessive lateral vibration at angular speed at which occurs is called as A) rotating speed B) critical speed C) vibrating speed D) None of the above
Last Answer : B) critical speed
Description : The unbalanced force caused by an eccentric mass m rotating at an angular speed v and located at a distance r from the axis of rotation is 2 a. mr ω 2 b. mgω 2 c. mr ω 2
Last Answer : c. mr ω 2
Description : A bob of simple pendulum oscillating in air is made to oscillate in oil. The time period will a.Increase b.Decrease c.Not change d.Decrease but reduction depends on viscosity of oil e.None of the above
Last Answer : a. Increase
Description : In the case of steady state forced vibration at a resonance, the amplitude of vibration is A) Inversely proportional to damping coefficient B) Inversely proportional to damping ratio C) Inversely proportional to resonant frequency D) Directly proportional to resonant frequency
Last Answer : B) Inversely proportional to damping ratio
Description : The natural frequency of the spring mass is inversely proportional to A. Stiffness B. Mass C. Density D. Deflection
Last Answer : B. Mass
Description : In a dynamic vibration absorber system, under tuned conditions which of the following relation holds good? A K 1 K 2 =M 1 M 2 B K 1 M 2 =M 1 K 2 C K 1 M 1 = K 2 M 2 D none of the mentioned
Last Answer : B K 1 M 2 =M 1 K 2
Description : When ≠ , the absorber is known as A. Untuned vibration absorber B. Tuned vibration absorber C. Both of above D. None of these
Last Answer : A. Untuned vibration absorber
Description : When = , the absorber is known as A. Untuned vibration absorber B. Tuned vibration absorber C. Both of above D. None of these
Last Answer : B. Tuned vibration absorber
Description : The resistance to the motion of the body is provided by ______ a) Medium of vibration b) Speed of vibration c) Length of the material d) External friction
Last Answer : a) Medium of vibration
Description : Needle bearing a roller bearing having a number of smaller diameter roller is well suited to a) Application involving oscillating motion b) Exceptionally high load capacity application at low peripheral speed c) Both (a) and (b) d) None of the above
Last Answer : c) Both (a) and (b)
Description : When the torsional pendulum vibrating the observed amplitudes on the same side of neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5
Last Answer : C 0.693
Description : When the torsional pendulum vibrating, the observed amplitudes on the same side of the neutral axis for successive cycles are found to decay 50% of the initial value determine logarithmic decrement. A 0.065 B 0.006 C 0.693 D 0.5
Description : Who discovered the concept of pendulum? A. Newton B. Einstein C. Galileo D. None
Last Answer : C. Galileo
Description : The number of degrees of freedom of a simple pendulum is: (a) 0 (b) 1 (c) 2
Last Answer : (b) 1
Description : What is meant by critical damping coefficient? * 1 point (A) Frequency of damped free vibrations is less than zero (B). The motion is a periodic in nature (C). Both a. and b. (D). None of the above
Last Answer : (C). Both a. and b.
Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that A Its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration D Measurement of vibratory motion is without any reference point
Last Answer : C Its natural frequency is equal to the frequency of vibration
Description : What is meant by critical damping coefficient? A Frequency of damped free vibrations is less than zero B The motion is aperiodic in nature C Both a. and b. D None of the above
Last Answer : B The motion is aperiodic in nature
Description : The motion completed during one time period is known as _______. A period of vibration B cycle C frequency D all of the above
Last Answer : B cycle
Description : The motion of a system executing harmonic motion with one natural frequency is known as _______ A. principal mode of vibration B. natural mode of vibration C. both a. and b. D. none of the above
Last Answer : C. both a. and b.
Description : The motion completed during one time period is known as _______. A. period of vibration B. cycle C. frequency D. all of the above
Last Answer : B. cycle
Description : . The motion completed during one time period is known as _______. A. period of vibration B. cycle C. frequency D. all of the above
Description : The motion of a system executing harmonic motion with one natural frequency is known as _______ A) principal mode of vibration B) natural mode of vibration C) both a. and b. D)none of the above
Last Answer : C) both a. and b.
Description : If frequency of excitation of a forced vibration system with negligible damping is very close to natural frequency of the system, then the system will A) Execute harmonic motion of large amplitude B) Beat with a very high peak amplitude C) Perform aperiodic motion D) None of the above
Last Answer : A) Execute harmonic motion of large amplitude
Description : If harmonic motion of same frequency and same phase are superimposed in two perpendicular directions ( x and y) then, the resultant motion will be, A) circle B) An ellipse C) An square D) An rectangle
Last Answer : C) An square
Description : What is meant by critical damping coefficient? B ( A )Frequency of damped free vibrations is less than zero ( B )The motion is aperiodic in nature ( C )Both a. and b. (D)None of the above
Last Answer : ( B )The motion is aperiodic in nature