Description : A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°
Last Answer : (C) 45°
Description : Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking
Last Answer : Answer: Option D
Description : The angle of intersection of a contour and a ridge line, is (A) 30° (B) 45° (C) 60° (D) 90°
Last Answer : (D) 90°
Description : A ship strikes the berth generally at an angle (A) 90° with the face of the dock (B) 45° with the face of the dock (C) 30° with the face of the dock (D) 10° with the face of the dock
Last Answer : (D) 10° with the face of the dock
Description : Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°
Description : In inverting amplifier, the phase difference between input and output voltages must be A. 30° B. 45° C. 90° D. 180°
Last Answer : 180°
Description : A projectile is fired into the air at an angle of 23 degrees. At what other angle would this projectile have the same range if air resistance is neglected? w) 46 degrees x) 60 degrees y) 67 degrees z) 68 degrees
Last Answer : ANSWER: Y -- 67 DEGREES
Description : A projectile is thrown at an angle of 30° to the horizontal. What should be the range of initial velocity (u)
Last Answer : A projectile is thrown at an angle of 30° to the horizontal. What should be the range of initial velocity (u) ... 40m and 50 m? Assume g = 10 m s-2.
Description : The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal
Last Answer : (2) 45° with horizontal Explanation: This has to do with the equation of a parabola or trajectory which is z = (tane)x 2 cos 9) 2. We can see that if the ball is fired at a 45 degree angle from the ground, the horizontal distance will be a maximum.
Last Answer : 45° with horizontal
Description : Which of the following pipe bends will incur the largest head loss? (A) U-bend (B) 30° bend (C) 45° bend (D) 90° bend
Last Answer : (A) U-bend
Description : The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90
Last Answer : (B) 45°
Description : Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil
Last Answer : (C) Is limited to a maximum value of 45°
Description : If the angle of incidence formed on a concave mirror at a point is 30° then the angle of reflection will be: (1) 15° (2) 30° (3) 60° (4) 90°
Last Answer : (2) 30° Explanation: The angle between the incident ray and the normal is known as the angle of inci dence. The angle between the reflected ray and the normal is known as the angle of reflection.
Description : What is the value of included angle of a triangular notch for maximum discharge? (A) 30° (B) 60° (C) 90° (D) 120°
Last Answer : (C) 90°
Description : If the horizontal range of a projectile is four times its maximum height, the angle of projection is
Last Answer : 45°
Description : The angle of minimum deviation of an equiangular prism, having a refractive index of 1.732 is (a) 60° (b) 30° (c) 45° (d) 0°
Last Answer : Ans:(a)
Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD ... reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90
Last Answer : (D) 90
Description : A well conditioned triangle has no angle less than (A) 20° (B) 30° (C) 45° (D) 60°
Last Answer : (B) 30°
Description : The angle between two plane mirrors of optical square, is (A) 20° (B) 30° (C) 45° (D) 60°
Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°
Last Answer : Answer: Option B
Description : The anchorage value of a hook is assumed sixteen times the diameter of the bar if the angle of the bend, is (A) 30° (B) 40° (C) 45° (D) All the above
Description : The disc angle of a good plough varies between a) 25°-30° b) 10°-15° c) 18°-24° d) 42°-45°
Last Answer : 42°-45°
Description : If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°
Last Answer : D
Description : ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is (A) 90° (B) 120° (C) 210° (D) 270°
Last Answer : (C) 210°
Description : A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°
Last Answer : (A) 45°
Description : A member is balanced at its end by two inclined members carrying equal forces. For equilibrium the angle between the inclined bars must be (A) 3° (B) 45° (C) 90° (D) 120°
Last Answer : (D) 120°
Description : PQRS is a square. A is a point on PS ,B is a point on PQ,C is a point on QR. ABC is a triangle inside square PQRS. Angle abc = 90° . If AP=BQ=CR then prove that angle BAC =45° -Maths 9th
Last Answer : This is the sketch of the question but its hard to answer.
Description : The helix angle for double helical gears may be made up to (A) 45° (B) 60° (C) 75° (D) 90°
Description : At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°
Last Answer : (A) 40° and 140
Description : If the shearing stress is zero on two planes, then the angle between the two planes is (A) 45° (B) 90° (C) 135° (D) 225°
Description : The angle between the directions of the failure and the major principal plane, is equal to (A) 90° + effective angle of shearing resistance (B) 90° + half of the angle of shearing resistance (C) 45° - half of the angle of shearing resistance (D) 45° + half of the angle of shearing resistance
Description : When the width of car parking space and width of street are limited, generally preferred parking system is (A) Parallel parking (B) 45° angle parking (C) 65° angle parking (D) 90° angle parking
Last Answer : Answer: Option A
Description : The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60
Description : For a parallel load on a fillet weld of equal legs, the plane of maximum shear occurs at (a) 22.5° (b) 30° (c) 45° (d) 60°
Last Answer : (c) 45°
Description : In any good staircase, the maximum and minimum pitch respectively should be (A) 90° and 0° (B) 75° and 30° (C) 60° and 10° (D) 40° and 25°
Last Answer : Option D
Description : 1 rad is equal to A. 57.3° B. 54° C. 45° D. 90°
Last Answer : 57.3°
Description : Phase difference between a node and an antinode is A. 90° B. 45° C. 180° D. 360°
Description : During the motion of a projectile fired from the earth surface, ______. (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant
Last Answer : (4) horizontal component of its velocity remains constant Explanation: The motion of a projectile is a two-dimensional motion-Horizontal motion and vertical motion-that take place independent ... continuously affects the vertical component, so the vertical motion is a uniformly accelerated motion.
Description : After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant
Last Answer : ANSWER: Z -- REMAINS CONSTANT
Description : During the motion of a projectile fired from the earth surface, _______ (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant
Last Answer : horizontal component of its velocity remains constant
Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane
Last Answer : b. 30? with vertical
Description : For the maximum range of a projectile the angle of projection should be a.90? b.30? c.22 d.45? e.15?
Last Answer : d. 45?
Description : A projectile reaches maximum range, when angle of projection is at?
Last Answer : 450
Description : The value of 2 tan 2 45°+ cos 2 30° − sin 2 60° is (a) 0 (b) 1 (c) -2 (d) 2
Last Answer : (d) 2
Description : sin 2A = 2 sin A is true when A = a 30° b 45° c 0° d 60°
Last Answer : a 0
Description : The zone in which transverse bending is likely to occur may be obtained by drawing a line from the (A) 30° (B) 45° (C) 60° (D) None of these
Description : 30°, 60° and 90° connections are made in a directional relay to render the relay (A) Sufficient torque under fault conditions (B) Zero torque under fault conditions (C) Current grading (D) Time grading
Last Answer : 30°, 60° and 90° connections are made in a directional relay to render the relay Sufficient torque under fault conditions
Description : When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?
Last Answer : e. 76?