Kirchoff’s law applies to __________ radiation. (A) Total (B) Monochromatic (C) Both (A) & (B) (D) Neither (A) nor (B)

Kirchoff’s law applies to __________ radiation. (A) Total (B) Monochromatic (C) Both (A) & (B) (D) Neither (A) nor (B)
by

1 Answer

Answer :

(C) Both (A) & (B)


by

Related questions

Kirchoff's law is applicable to (A) Monochromatic radiation only (B) Total radiation only (C) Both (A) and (B) (D) Only volumes and not to surfaces

Description : Kirchoff's law is applicable to (A) Monochromatic radiation only (B) Total radiation only (C) Both (A) and (B) (D) Only volumes and not to surfaces

Last Answer : (C) Both (A) and (B)

The ratio of total radiating power to the absorptivity of the body depends upon the __________ as per Kirchoff’s law. (A) Wavelength of radiation (B) Nature of the body (C) Temperature of the body (D) None of these

Description : The ratio of total radiating power to the absorptivity of the body depends upon the __________ as per Kirchoff’s law. (A) Wavelength of radiation (B) Nature of the body (C) Temperature of the body (D) None of these

Last Answer : (C) Temperature of the body

Stefan's block body radiation law can also be derived from __________ law. (A) Kirchoff’s (B) Planck's (C) Fourier's (D) None of these

Description : Stefan's block body radiation law can also be derived from __________ law. (A) Kirchoff’s (B) Planck's (C) Fourier's (D) None of these

Last Answer : (B) Planck's

Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

. A perfect black body is a perfect __________ of radiation. (A) Absorber (B) Emitter (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : . A perfect black body is a perfect __________ of radiation. (A) Absorber (B) Emitter (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The ratio of the total emissive power to the absorptivity for all bodies is same at ther-mal equilibrium". This is __________ law. (A) Kirchoff’s (B) Planck's (C) Wien's displacement (D) Stefan-Boltzmann

Description : The ratio of the total emissive power to the absorptivity for all bodies is same at ther-mal equilibrium". This is __________ law. (A) Kirchoff’s (B) Planck's (C) Wien's displacement (D) Stefan-Boltzmann

Last Answer : (A) Kirchoff’s

Fourier's law of heat conduction applies to __________ surfaces. (A) Isothermal (B) Non-isothermal (C) Both (A) and (B) (D) Neither (A) and (B)

Description : Fourier's law of heat conduction applies to __________ surfaces. (A) Isothermal (B) Non-isothermal (C) Both (A) and (B) (D) Neither (A) and (B)

Last Answer : (C) Both (A) and (B)

At Equilibrium, the radiation emitted must equal the radiation absorbed.  a. Boyle’s Law  b. Planck’s Law  c. Kirchoff’s Law  d. Joule’s Law

Description : At Equilibrium, the radiation emitted must equal the radiation absorbed.  a. Boyle’s Law  b. Planck’s Law  c. Kirchoff’s Law  d. Joule’s Law

Last Answer : Kirchoff’s Law

Which one gives the monochromatic emissive power for black body radiation? (A) Planck's law (B) Kirchhoff’s law (C) Wien's law (D) Stefan-Boltzmann law

Description : Which one gives the monochromatic emissive power for black body radiation? (A) Planck's law (B) Kirchhoff’s law (C) Wien's law (D) Stefan-Boltzmann law

Last Answer : (A) Planck's law

Fourier's law applies to the heat transfer by (A) Convection (B) Radiation (C) Conduction (D) All (A), (B) & (C)

Description : Fourier's law applies to the heat transfer by (A) Convection (B) Radiation (C) Conduction (D) All (A), (B) & (C)

Last Answer : (C) Conduction

he gas law (PV = RT) is true for an __________ change. (A) Isothermal (B) Adiabatic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : he gas law (PV = RT) is true for an __________ change. (A) Isothermal (B) Adiabatic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Wavelength corresponding to the maximum energy is inversely proportional to the absolute temperature. This is __________ law. (A) Stefan's (B) Dalton's (C) Wien's (D) Kirchoff’s

Description : Wavelength corresponding to the maximum energy is inversely proportional to the absolute temperature. This is __________ law. (A) Stefan's (B) Dalton's (C) Wien's (D) Kirchoff’s

Last Answer : (C) Wien's

"If different processes are used to bring about the same chemical reaction, the enthalpy change is same for all of them". This is __________ law. (A) Hess's (B) Kirchoff's (C) Lavoisier and Laplace (D) None of these

Description : "If different processes are used to bring about the same chemical reaction, the enthalpy change is same for all of them". This is __________ law. (A) Hess's (B) Kirchoff's (C) Lavoisier and Laplace (D) None of these

Last Answer : (A) Hess's

The variation of heat of reaction with temperature at constant pressure is given by the __________ law. (A) Kelvin's (B) Antoine’s (C) Kirchoff’s (D) None of these

Description : The variation of heat of reaction with temperature at constant pressure is given by the __________ law. (A) Kelvin's (B) Antoine’s (C) Kirchoff’s (D) None of these

Last Answer : (C) Kirchoff’s

For assurance engagements which are neither audits nor reviews of historical financial information, the following standard applies: a. PSAs b. PSAEs c. PSREs d. PSRSs

Description : For assurance engagements which are neither audits nor reviews of historical financial information, the following standard applies: a. PSAs b. PSAEs c. PSREs d. PSRSs

Last Answer : PSAEs

If heat transfer rate varies with the time, it is termed as (A) Forced convection (B) Steady state conduction (C) Monochromatic radiation (D) None of these

Description : If heat transfer rate varies with the time, it is termed as (A) Forced convection (B) Steady state conduction (C) Monochromatic radiation (D) None of these

Last Answer : (D) None of these

. Photo-chemical reactions occur in presence of (A) Sunlight (B) Darkness (C) Solid catalysts (D) Monochromatic radiation only

Description : . Photo-chemical reactions occur in presence of (A) Sunlight (B) Darkness (C) Solid catalysts (D) Monochromatic radiation only

Last Answer : (A) Sunlight

The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Stefan's law describes the mass transfer by (A) Diffusion (B) Bulk flow (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : Stefan's law describes the mass transfer by (A) Diffusion (B) Bulk flow (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b'

In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Use of baffles in agitators help in minimising the __________ tendency. (A) Swirling (B) Vortexing (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Use of baffles in agitators help in minimising the __________ tendency. (A) Swirling (B) Vortexing (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Ultra

Corrosion involves exchange of electrons in __________ corrosion. (A) Chemical (B) Electrochemical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Corrosion involves exchange of electrons in __________ corrosion. (A) Chemical (B) Electrochemical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Abrasive

Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (C) Both 'a' & 'b

Diffusion in concentrated solutions differs from that in dilute solutions, because of the change in the __________ with the concentration of the solution. (A) Degree of ideality (B) Viscosity (C) Both 'a '& 'b' (D) Neither 'a' nor 'b'

Description : Diffusion in concentrated solutions differs from that in dilute solutions, because of the change in the __________ with the concentration of the solution. (A) Degree of ideality (B) Viscosity (C) Both 'a '& 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a '& 'b

In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Liquid

In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Gas

The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Plug

The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Perfectly mixed

Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In case of constant underflow extraction operation, the __________ atall solute concentration.(A) Solids are drained to the same extent(B) Ratio of the insoluble to solution is constant(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : In case of constant underflow extraction operation, the __________ atall solute concentration. (A) Solids are drained to the same extent (B) Ratio of the insoluble to solution is constant (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Nusselt number (for forced convection heat transfer) is a function of the __________ number. (A) Prandtl (B) Reynolds (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Nusselt number (for forced convection heat transfer) is a function of the __________ number. (A) Prandtl (B) Reynolds (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Very __________ coals are completely devoid of cokability i.e., it is non-coking. (A) Young (B) Mature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Very __________ coals are completely devoid of cokability i.e., it is non-coking. (A) Young (B) Mature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (C) Both 'a' & 'b'

Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The rate of shear versus the shear stress curves are time dependent for __________ fluid. (A) Thixotropic (B) Rheopectic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The rate of shear versus the shear stress curves are time dependent for __________ fluid. (A) Thixotropic (B) Rheopectic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

. A Rotameter works on the principle of __________ pressure drop. (A) Constant(B) Variable(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : . A Rotameter works on the principle of __________ pressure drop. (A) Constant (B) Variable (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Constant

Velocity head on sudden enlargement in a horizontal pipe is converted into __________ head. (A) Elevation (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Velocity head on sudden enlargement in a horizontal pipe is converted into __________ head. (A) Elevation (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Pressure

With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Conversion

Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The single parameter model proposed for describing non-ideal flow is the __________ model. (A) Tank in series (B) Dispersion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The single parameter model proposed for describing non-ideal flow is the __________ model. (A) Tank in series (B) Dispersion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Chemical kinetics can predict the __________ of a chemical reaction. (A) Rate (B) Feasibility (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Chemical kinetics can predict the __________ of a chemical reaction. (A) Rate (B) Feasibility (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Rate

In a CSTR __________ varies with time. (A) Reaction rate (B) Concentration (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a CSTR __________ varies with time. (A) Reaction rate (B) Concentration (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)