Describe any four methods to improve fuel economy. 

1 Answer

Answer :

Methods to Improve Fuel Economy:

1. Use of multi-functional fuel additives will provide 3 to 4% fuel economy.

2. Good driving habits.

3. Properly maintained fuel supply system.

4. Use of computer controlled fuel injection system.

5. Use of computer controlled ignition system.

6. Use of higher voltage automotive electrical system (42 volts system).

Related questions

Description : State four methods to improve fuel economy of a vehicle.

Last Answer : Answer: Methods of improving fuel economy.  1) Use of multi-functional fuel additives will provide 3 to 4% fuel economy. 2) Good driving habits. 3) Properly maintained fuel supply ... computer controlled ignition system. 6) Use of higher voltage automotive electrical system (42 volts system).

Description : Describe the working of electronic fuel injector with the help of suitable sketch.

Last Answer : Working of Electronic Fuel Injector: In MPFI system, Top feed fuel Injector is used. These injectors are solenoid-operated valves that are opened and closed by means of electric pulses from the ECU. The ... Pintle and discharge opening to form a fine spray pattern that has a cone shape.

Description : Describe the procedure to locate leakage in Compressed Natural Gas Fuel supply system of a car. State relevant precaution.

Last Answer : Procedure to locate Leakage in Compressed Natural Gas Fuel Supply System of a Car: 1. The first indicator is the foul smelling agent present in CNG.. 2. The second level of test you can do is to take a ... , incense sticks, etc. 2. Close the CNG regulator and 3. Put the safety cap on the cylinder.

Description : Sketch and describe LPG fuel supply system layout.

Last Answer : Figure: LPG Fuel Supply System Layout for SI Engine.  The system works by pumping LPG at high pressure from the LPG vehicle tank to the engine inlet manifold via a set of liquid ... intake manifold. The fuel vaporizing in the intake manifold cools and increases the density of the intake air.

Description : Describe the Air Fuel Ratio in CI Engine.

Last Answer : Air Fuel Ratio in CI Engine: Thermodynamic analysis of the engine cycles has clearly established that operating an engine with a leaner air-fuel ratio always gives a better thermal efficiency but the ... always designed to operate with an excess air of 15 to 40% depending upon the application.

Description : LPG is used as a fuel for petrol engine. Justify your answer.

Last Answer : LPG is used as a fuel for petrol engine, because of its following advantages  1. It is cheaper than petrol 2. It is highly detonation resistant and does not pre-ignite easily. 3. It gives ... modified. LPG kits are readily available (even for MPFI engines) and the kit cost is mostly affordable. 

Description : Illustrate with example of fuel injection as an output control function of ECM.

Last Answer : Fuel Injection as an Output Control Function of ECM: ECM controls fuel injection by calculating A: F ratio needed for engine. Engine requires different air fuel ratios while cranking, warm- up, idle, ... open, allowing enough air into the engine for start and idle (Throttle body valve is closed).

Description : Describe three engine modifications to be done to reduce SI engine Emission.

Last Answer : Engine Modifications to be Done to reduce SI Engine Emission are: 1. Use of leaner air-fuel ratios: The carburettor may be modified to provide relatively lean air fuel mixtures during ... tolerances and using special type of carburettors. This also includes fuel injection in manifold.

Description : Describe the idle speed control function of an electronic control module with neat sketch.

Last Answer : Idle Speed Control System as Output Function of ECM: While the engine is being started, or operated, the logic module of Electronic Control Module (ECM) will signal the Stepper motor of Idle Speed ... speed control valve stepper motor allows 125 possible valve opening positions. OR

Description : Describe the working of high pressure pump used in CRDI system.

Last Answer : Working of High Pressure Fuel Pump Used In CRDI System: * The fuel inlet to the pump is controlled by the SCV (suction control valve) through the EDC * The rotation of the inner cam pushes ... maintained in the common rail. Figure: Sectional View of High Pressure Pump used in CRDI System

Description : Describe the working of PCV System.

Last Answer : Working of PCV system:  During normal compression stroke, a small amount of gases in the combustion chamber escapes past the piston. Approximately 70 % of these blow-by' gases ... , crankcase ventilation performance is optimized, while engine performance and drivability remains unaffected. 

Description : Sketch and describe the layout of series hybrid vehicles. 

Last Answer : Series-Hybrid vehicle  In Series Hybrid vehicles, the Internal Combustion Engine (ICE) drives a generator, which charges the battery and supplies current to the electronically controlled motor. The ... drive have to be rated to the maximum power. It has low overall system efficiency.

Description : Describe the working of pressure regulation in PFI system with the help of schematic diagram.

Last Answer : Working of Pressure Regulator in PFI System: The fuel pump provides more fuel than the maximum required by the engine. Fuel not used by the engine is returned to the fuel tank. The fuel rail supplies all injectors. ... between 2.0 and 3.5 bar and allows excess fuel to return to the fuel tank.

Description : Describe features of Variable Valve Timing Mechanism (VVT)

Last Answer : Features of VVT: Variable valve timing (VVT) is a system for varying the valve opening of an internal combustion engine. This allows the engine to deliver high power, but also to work tractably ... actually driven by that fast cam. Therefore, fast timing and high lift are obtained in both valves 

Description : Describe operation of CRDI system.

Last Answer : Operation of CRDI System: High pressure pump provides high pressure fuel to the common rail. The common rail stores the fuel and maintains a constant pressure in the common rail line (approximately 1500 bars ... needle movement.  Figure: Layout of Common Rail Fuel System for Diesel Engine

Description : State four method to control diesel smoke.

Last Answer : Methods to Control Diesel Smoke : 1. De-rating:- At lower loads, the air: fuel ratio obtained will be leaner & hence the smoke developed will be less. However this means a loss ... the intake manifold. This shortens the delay period- curbs thermal cracking which is responsible for soot format 

Description : List four drawback of carbureted SI Engine.

Last Answer : Drawback of Carbureted SI Engine: 1) Air-Fuel Ratio: As in SI engine Air-fuel ratio varies from 8:1 to 18.5:1 i.e. from 8 kg of air/kg of fuel to 18.5 kg of air/kg of fuel. Richer or leaner air-fuel ... from 8 kg of air/kg of fuel to 18.5 kg of air/kg of fuel. So emission is more in SI engine.

Description : Describe the following in brief a)Hydrogen economy b) Fuel cell c) Uses of Hydrogen peroxide

Last Answer : Ans a) The storage and transportation of liquid hydrogen as a fuel is hydrogen economy b)Those cells in which the energy of combustion is converted into electricity are called fuel cells e g-H2-O2 fuel cell c)In bleaching, as antiseptic ,as oxidizing and reducing agent.

Description : List three methods of fuel injection. Describe sequential method with suitable sketch.

Last Answer : Methods of petrol injection 1. Sequential fuel injection. (SFI) 2. Grouped fuel injection. 3. Simultaneous fuel injection 4. Continuous injection.  Sequential Injection: Each injector ... to crank/ camshaft position and pulse width, can be optimized for each individual cylinder.

Description : List any four parameters of improving fuel economy.

Last Answer : 1. Use of multi-functional fuel additives will provide 3 to 4% fuel economy. 2. Good driving habits. 3. Properly maintained fuel supply system. 4. Use of computer controlled fuel ... computer controlled ignition system. 6. Use of higher voltage automotive electrical system (42 volts system).

Description : Compare the SI and CI engine on the basis of: (i) Compression Ratio (ii) Operating Speed (iii) Power O/P per weight.

Last Answer : Parameter SI Engine CI Engine (i) Compression Ratio Compression ratio is low, about 10:1 limited by detonation Compression ratio is higher, about 18:1 to 22:1 (ii) ... due to lower compression ratio. Power output is more than SI engine due to higher compression ratio.

Description : List two disadvantages and advantages of CNG

Last Answer : Dis - advantages: 1. Low engine performance. 2. Low engine volumetric efficiency. 3. Need of large pressurized fuel storage tank. 4. Refuelling is a slow process 5. Inconsistent fuel properties ... toxic. 11. CNG is lighter than air and so Dissipates into atmosphere implies less chance of fire

Description : State the function and location of oxygen sensor and mass air flow sensor. 

Last Answer : Name Function Location Oxygen Sensor Measuring quantity of oxygen in exhaust  Located at inlet and outlet side of catalytic convertor Mass Air Flow Sensor It is used to tell ECU the mass of air entering the engine. Mounted between air filter and turbocharger.

Description : State the effect of detonation.

Last Answer : Effects of Detonation: 1. Noise and roughness: Mild knock is seldom audible and is not harmful. When intensity of knock increases a loud pulsating noise is produced due to development of a ... and combustion chamber wall and this overheating leads to ignite the charge before the passage of spark.

Description : State the general conditions necessary for combustion.

Last Answer : Three things are required in proper combination before ignition and combustion can take place Heat, Oxygen and Fuel. There must be Fuel to burn. There must be Air to supply oxygen. There must be Heat (ignition temperature) to start and continue the combustion process.

Description : Describe any four points of importance of primary sector in the Indian economy. -SST 10th

Last Answer : (i) Primary sector contributes more than 20% to the GDP of India. (ii) Its employment share is more than 55%. (iii) It is the most labouring sector of Indian economy. (iv) It covers agriculture, dairy, fishing, forestry which all contribute to the Indian economy.

Description : What is liberalization ? Describe any four effects of liberalization on the Indian economy. -SST 10th

Last Answer : 1. Removal of barriers or restrictions set up by the government is known as the process of liberalisation. The Indian government after independence had put barriers to foreign trade and foreign ... from the impact of British rule which first required the development of India and its economy.

Description : Describe any four traditional methods of rain water harvesting adopted in different parts of India. -SST 10th

Last Answer : Methods of rain water harvesting used in India are: (i) Guls and Kuls: People built guls and kuls in hilly and mountainous regions to divert water. These are simple channels. They are mainly used ... . The first spell of rain was usually not collected as this would clean the roofs and the pipes.

Description : Define “Drug Adulteration”. Describe any four methods of adulteration with suitable examples.

Last Answer : Definition: Adulteration is the debasement of an article. Methods of Adulteration : 1. Replacement by exhausted drugs Ex. a).Exhausted saffron is coloured artificially  b)Exhausted Ginger is mixed with starch ... .  c) White oil in oil of Coconut.  d) Stearin or paraffin in cocoa butter.

Description : Describe any four methods used to reduce earth resistance.  

Last Answer : To reduce earth resistance following steps/methods are necessary: 1. Earth pit of more depth & width- breadth should be made. 2. Use of higher size/cross section of earthing material like ... galvanized. 12. Electrodes should be placed in the earth in the upright vertical position. 

Description : (i) Describe the principle of mechanical governor in fuel injection pump. (ii) State four types of injector nozzles

Last Answer : (i) Working Principal of mechanical governor of FIP: The working principle of mechanical governor is illustrated in figure. When the engine speed tends to exceed the limit the weights fly apart. This causes ... ) Multi-hole nozzle 3) Long stem nozzle 4) Pintle nozzles 5) Pintuax nozzles 

Description : Describe four properties of gasoline as a fuel for SI engine

Last Answer : Volatility: volatility depend upon fractinal composition of fuel. Method of measuring volatility has been standardized by ASTM ( American society of Testing Materials) and the graohical representation ... gasoline to improve the gasoline stability during storage by inhibiting the formation of gums.

Description : How much are you willing to suffer to improve the economy?

Last Answer : I'm already suffering taxes everywhere. But sacrifices aren't unheard of. There are people who do a lot with very little. My parents and my siblings and I did. I also did it for a few years ... extremes listed above. But I'm no stranger to sacrifices when they have to be made to struggle through.

Description : How does the government typically change physical policy to try to improve the US economy during a recitation recession recession?

Last Answer : In such circumstances, it would be prudent, even necessary, and certainly .their typically blindly loyal followers in emerging market economies continue Such fiscal spending should not only seek to buffer the economic downturn

Description : To be a self-reliant economy the government need to undertakes are (a) Rapid Economic Growth (b) Increase employment (c) Improve technology (d) Above all

Last Answer : (d) Above all

Description : Michael Porter has argued that: a) the logic of old economy strategies remains the same for internet-based companies. b) the internet did not bring new types of products/services or large ... does not matter to global competition. d) the internet does not help to improve company operations.

Last Answer : the logic of old economy strategies remains the same for internet-based companies.

Description : List out the methods to improve the power factor of the induction motor.

Last Answer : The power factor of the induction motor can be improved by reducing the magnetizing current and leakage reactance. The magnetizing current can be reduced by reducing the length of air gap. The ... stator & rotor slots, by providing short chorded winding and reducing the overhang in stator winding.

Description : What are the methods to improve slew rate?

Last Answer : a. The slew rate can be improved with higher closed-loop gain and dc supply voltage. But the slew rate also varies with temperature. i.e., slew rate decreases with increase in temperature. b. Another ... a higher slew rate, op-amp should have either a higher current or a small value of capacitor.

Description : A marketing audit's primary purpose is to A)check on the firm's current marketing position for financial and legal reasons. B)identify weaknesses in ongoing marketing operations and plan the ... improve them. D)aid evaluation and reallocate the firm's marketing efforts and marketing opportunities.

Last Answer : B)identify weaknesses in ongoing marketing operations and plan the necessary improvements to correct these weaknesses.

Description : Explain some of the methods to improve the strength of transmission system?

Last Answer :  Introducing or adding of new transmission lines in to the system to avoid the overloading of the existing lines  Application of devices such as series capacitors in the right location of ... system  Adoption of multi-voltage levels an multi-circuits in the existing ac transmission system

Description : (i) Suggest the methods to improve the performance of steam turbine. Explain anyone in brief.  (ii) Identity the different losses occurred in steam turbine. 

Last Answer : i) Methods to improve turbine efficiency 1) Reheating of Steam 2) Regenerative feed heating 3) Binary Vapour Plant Regenerative feed heating System : The process of draining ... heavily insulated to reduce the heat loss to surroundings by radiation and so these losses are negligible

Description : What are some simple ways to improve your car's fuel efficiency?

Last Answer : Some simple ways to improve your cars fuel efficiency are to make sure your tires are at the proper pressure, that your air filter is clean and that you change your oil and spark plugs at regular intervals.

Description : Can you recommend a reliable small car with excellent fuel economy?

Last Answer : I did a little research to confirm what I already think about Honda products and they do consistently rank at the top for reliability and safety. That said I am also a fan of Subaru and Toyota products as ... a U turn in our driveway! All that said your Fit should be a good choice at least IMO.

Description : Would a fuel economy figure for a new home be useful for potential buyers?

Last Answer : I've bought and sold a couple houses, a review of the last year's utilities was usually in the due diligence. So yes there a benefit of fuel economy for complete house. I have a two zone heating ... a friend in town that has a house almost the same size and shape, he pays 50% more for utilities.

Description : I have a vehicle that came standard with 16" wheels but now has older 15" wheels. What if any difference will be in fuel economy because of this?

Last Answer : You should be fine. If I remember correctly + or – 3% for tires. But if your not sure go to a tire shop and ask them.

Description : What kind of fuel economy does the Chevy Astro get?

Last Answer : The Chevy Astro was a van produced in 1990-2005. The it is rated poor in fuel economy averaging around 15 miles per gallon. You can pick up a used one for under $2000.

Description : Which small economy car has the best fuel efficiency?

Last Answer : The Honda Insight Hybrid and Civic Hybrid both get 40 mpg CIty according to the government. The Civic Hybrid gets 45 highway and the Insight Hybrid gets 43 highway.

Description : Which brand of cars has the best fuel economy?

Last Answer : First off, each and every brand of vehicle out there will promise to have the lowest emissions and the highest mileage available. It seems that there is no one place to find the definite answer, you just have to go with what you yourself think is best for you.

Description : Achieve Greater Fuel Economy with a Diesel Electric Hybrid?

Last Answer : The diesel hybrid is designed to increase fuel efficiency when compared to a gasoline hybrid. Because of the greater efficiencies of a diesel engine, it provides better fuel mileage and diesel ... benefits to a hybrid and you can achieve significant cost savings over a gasoline-electric hybrid.

Description : What is the purpose of the Corporate Average Fuel Economy?

Last Answer : The purpose of the act was to improve the fuel economy of cars and light trucks. Specifically, by acting on the sales-weighted harmonic mean fuel economy. It's very tightly focused on the ... or overly abstract implications being one of the more common reasons for additions to it to be rejected.