Description : Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation
Last Answer : (C) Reforming
Description : The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline
Last Answer : (C) Straight run gasoline
Description : . Reforming (A) Uses naphtha as feedstock (B) Does not much affect the molecular weight of the feed (C) Improves the quality & yield of gasoline (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Naphtha yield in straight run distillation of crude oil may be about__________ percent. (A) 2 (B) 6 (C) 12 (D) 18
Last Answer : (B) 6
Description : Which of the following is the most suitable feed for platforming process (reforming)? (A) Olefinic hydrocarbon (B) Naphtha (C) Fuel oil (D) Atmospheric residue
Last Answer : (A) Olefinic hydrocarbon
Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil
Last Answer : (A) Higher yield of straight run gasoline
Description : Percentage of straight run gasoline in a typical crude oil may be around (A) 6 (B) 18 (C) 38 (D) 52
Last Answer : (D) 52
Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98
Last Answer : (A) 85
Description : Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API)? (A) Diesel (B) Gasoline (C) Atmospheric gas oil (D) Vacuum gas oil
Last Answer : (C) Atmospheric gas oil
Description : Which is the most ideal feed stock for 'coking' process used for the manufacture of petroleum coke? (A) Naphtha (B) Vacuum residue (C) Light gas oil (D) Diesel
Last Answer : (B) Vacuum residue
Description : Clay treatment of petroleum products (A) Decolorizes & stabilises cracked gasoline (B) Desulphurise straight run gasoline & kerosene (C) Adsorb arsenic from feedstock to catalytic reforming (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : The molecular structure of the straight-run gasoline is changed by a) reforming b) refining c) cracking d) boiling
Last Answer : Answer: a Explanation: The molecular structure of the straight-run gasoline is changed by reforming and hydrocarbons are decomposed into smaller hydrocarbons by cracking.
Description : Which of the following oil gasification processes is non-catalytic? (A) Semet-Solvay process (B) Segas process (C) Onia-Gegi process (D) Steam reforming of naphtha
Last Answer : (A) Semet-Solvay process
Description : Which of the following is not endothermic in nature? (A) Combustion of sulphur (B) Gasification of carbon (C) Thermal cracking of fuel oil (D) Steam reforming of naphtha
Last Answer : (A) Combustion of sulphur
Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation
Last Answer : (A) Shift conversion
Description : Which of the following is the costliest source of hydrogen needed for ammonia manufacture under Indian condition? (A) Electrolysis of water (B) Cryogenic removal of H2 from coke oven gas (C) Steam reforming of naphtha (D) Natural gas cracking
Last Answer : (A) Electrolysis of water
Description : Commercial production of hydrogen for the manufacture of nitrogenous fertilisers is done by (A) Steam reforming of naphtha and cracking of natural gas (B) Electrolysis of water (C) Cryogenic separation of hydrogen from coke oven gas (D) All (A), (B) and (C)
Description : Which of the following is the costliest method for commercial production of hydrogen for ammonia synthesis? (A) H2 separation from coke oven ga (B) Steam reforming of naphtha (C) Cracking of natural gas (D) Electrolysis of water
Last Answer : (D) Electrolysis of water
Description : Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic
Last Answer : (B) Endothermic
Description : Hydrogen gas is not produced commercially (for nitrogenous fertiliser manufacture) by (A) Iron-steam reaction (B) Electrolysis of water (C) Steam reforming of naphtha (D) Its cryogenic separation from coke oven gas
Last Answer : (A) Iron-steam reaction
Description : Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser? (A) Coal gasification (B) Steam reforming of naphtha (C) Electrolysis of water (D) Coke oven gas
Last Answer : (C) Electrolysis of water
Description : Which of the following has maximum hydrogen/carbon ratio (by weight)? (A) Naphtha (B) Gasoline (C) Diesel (D) Fuel oil
Last Answer : (B) Gasoline
Description : The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2
Last Answer : (B) 1-1.5
Description : A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26
Last Answer : (B) 10
Description : A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35
Last Answer : (A) 8
Description : Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these
Last Answer : (B) Distillation
Description : Optimum reaction temperature in steam reforming of naphtha is __________ °C. (A) 700 - 1000 (B) 300 - 450 (C) 1500-1700 (D) 100-200
Last Answer : (A) 700 - 1000
Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium
Last Answer : (C) Nickel oxide on alumina support
Description : Steam reforming of naphtha is a source of hydrogen production for nitrogenous fertiliser industry. What is the usual ratio of steam to carbon maintained in the process of steam reforming of naphtha? (A) 1.5 : 1 (B) 3.5 : 1 (C) 10 : 1 (D) 15 : 1
Last Answer : (B) 3.5 : 1
Description : Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium
Last Answer : (A) Nickel
Description : Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4
Last Answer : Ans:(b)
Description : The terminology used for the bottom most product from the vacuum crude distillation unit is (A) Residual crude (B) Residuum (C) Reduced crude (D) Petrolatum
Last Answer : (B) Residuum
Description : The vacuum maintained in vacuum distillation unit for reduced crude is about __________ mm Hg. (A) 1.2 (B) 12 (C) 120 (D) 700
Last Answer : (C) 120
Description : Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these
Last Answer : (C) Wax from lube oi
Description : Gasoline extracted from natural gas (by compression and cooling) is called the __________ gasoline. (A) Polymer (B) Unleaded (C) Casing head (D) Straight run
Last Answer : (B) Unleaded
Description : H2S present in naphtha reformed gas is removed by absorbing with (A) Ethanolamine (B) K2CO3 (C) HCl (D) Vacuum gas oi
Last Answer : (A) Ethanolamine
Description : Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude ... (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only
Description : Visbreaking (A) Uses natural gas as feed (B) Is carried out at atmospheric pressure (C) Produces fuel oil of lower viscosity (D) Produces gasoline only
Last Answer : (C) Produces fuel oil of lower viscosity
Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these
Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose
Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro
Last Answer : (A) Gives higher yield of petrol
Description : Aniline point is a property of the (A) Diesel (B) LPG (C) Naphtha (D) Gasoline
Last Answer : (C) Naphtha
Description : Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction (C) Produces high octane number gasoline (D) None of these
Last Answer : (D) None of these
Description : Which of the following fractions of petroleum contains maximum sulphur? (A) Diesel (B) Gasoline (C) Naphtha (D) Atmospheric residue
Last Answer : (D) Atmospheric residue
Description : Which of the following is not a commercially used feed-stock for the production of ammonia synthesis gas? (A) Water (B) Naphtha (C) Tar (D) Coal/coke oven gas
Last Answer : (C) Tar
Description : Bottom product of atmospheric pressure crude oil distillation column is termed as (A) Reduced crude (B) Heavy ends (C) Asphalt (D) Residuum
Last Answer : (A) Reduced crude
Description : Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay (D) All (A), (B) & (C)
Description : Which of the following gasoline (unleaded) has the least octane number? (A) Catalytically cracked gasoline (B) Straight run gasoline (C) Catalytically reformed gasoline (D) Polymer gasoline
Last Answer : (B) Straight run gasoline
Description : Which of the following categories of gasoline has the highest lead susceptibility? (A) Straight run gasoline (B) Platinum reformed gasoline (C) Catalytical cracked gasoline (D) Polymer gasoline
Last Answer : (A) Straight run gasoline
Description : Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity
Last Answer : (A) Calorific value
Description : Road grade bitumen is produced from vacuum residue by its (A) Aeration (B) Pyrolysis (C) Hydrogenation (D) Steam reforming
Last Answer : (D) Steam reforming