Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Pick out the undesirable property for a solvent meant for dewaxing of
lube oil.
(A) Complete miscibility with oil
(B) High solubility of wax in the solvent
(C) Both (A) and (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(C) Both (A) and (B)
by

Related questions

Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Description : Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Last Answer : (D) None of these

Pick out the additive property of lube oil out of following. (A) °API gravity (B) Specific gravity (C) Viscosity (D) Flashpoint

Description : Pick out the additive property of lube oil out of following. (A) °API gravity (B) Specific gravity (C) Viscosity (D) Flashpoint

Last Answer : (A) °API gravity

Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Description : Solvent used for dewaxing of petroleum products are (A) Furfural (B) Methyl ethyl ketone (MEK) (C) Propane (D) Both (B) & (C

Last Answer : (C) Propane

Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Description : Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Last Answer : (C) Wax from lube oi

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Oil produced by solvent extraction (A) Has low free fatty acid content (B) Is odourless (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Description : Most widely used solvent for dewaxing is (A) Methyl-ethyl-ketone (MEK) (B) Naphtha (C) Petroleum ether (D) Sodium plumbite

Last Answer : (A) Methyl-ethyl-ketone (MEK)

The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Description : The solvent used in Barisol dewaxing process is (A) Hexane (B) Furfural (C) Benzol and ethylene dichloride (D) Methyl ethyl ketone (MEK

Last Answer : (C) Benzol and ethylene dichloride

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

__________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : __________ increases with increase in pressure. (A) The melting point of wax (B) The boiling point of a liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Mercapsol and Unisol processes are meant for the (A) Dearomatization of kerosene (B) Removal of mercaptans (C) Dewaxing

Description : Mercapsol and Unisol processes are meant for the (A) Dearomatization of kerosene (B) Removal of mercaptans (C) Dewaxing

Last Answer : (B) Removal of mercaptan

Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Description : Deoiling is the process of removal of oil from wax. It is done by the __________ process. (A) Solvent extraction (B) Sweating (C) Resettling (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Ultracentrifuges running at speeds upto 100000 rpm is normally used for the (A) Separation of isotopes based on their density or molecular weights difference (B) Concentration of rubber latex (C) Separation of cream from milk (D) Dewaxing of lubricating oil

Description : Ultracentrifuges running at speeds upto 100000 rpm is normally used for the (A) Separation of isotopes based on their density or molecular weights difference (B) Concentration of rubber latex (C) Separation of cream from milk (D) Dewaxing of lubricating oil

Last Answer : (A) Separation of isotopes based on their density or molecular weights difference (B) Conc

Actual flame temperature is always lower than the adiabatic flame temperature, because there is (A) No possibility of obtaining complete combustion at high temperature (B) Always loss of heat from the flame (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Actual flame temperature is always lower than the adiabatic flame temperature, because there is (A) No possibility of obtaining complete combustion at high temperature (B) Always loss of heat from the flame (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Description : Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Last Answer : (C) Solubility

Deoiling of wax is done by its (A) Heating (B) Cooling (C) Solvent extraction (D) Both (B) & (C

Description : Deoiling of wax is done by its (A) Heating (B) Cooling (C) Solvent extraction (D) Both (B) & (C

Last Answer : (D) Both (B) & (C

Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Description : Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Last Answer : (A) High viscosity index lube oil

In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

Description : In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

Last Answer : A. Contour the wax as part of the fabrication of the working cast

Optical activity is a/an __________ property. (A) Additive (B) Constitutive (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Optical activity is a/an __________ property. (A) Additive (B) Constitutive (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Description : ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Last Answer : (D) High viscosity

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Description : High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Last Answer : (C) Viscosity

Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Last Answer : B) High thermal conductivity

The antibodies raised against a pure protein will show only one sharp spike on this technique: (A) Solubility curve (B) Solvent precipitation (C) Molecular weight determination (D) Immuno electrophoresis

Description : The antibodies raised against a pure protein will show only one sharp spike on this technique: (A) Solubility curve (B) Solvent precipitation (C) Molecular weight determination (D) Immuno electrophoresis

Last Answer : Answer : D

A sharp moving boundary is obtained between the pure solvent and solute containing layer in (A) Chromatography (B) Immuno Reactivity (C) Ultra Centrifugation (D) Solubility curve

Description : A sharp moving boundary is obtained between the pure solvent and solute containing layer in (A) Chromatography (B) Immuno Reactivity (C) Ultra Centrifugation (D) Solubility curve

Last Answer : Answer :C

Which of the following has highest solubility in ionic solvent? (a) Silver iodide (b) Silver bromide (c) Silver chloride (d) Silver fluoride

Description : Which of the following has highest solubility in ionic solvent? (a) Silver iodide (b) Silver bromide (c) Silver chloride (d) Silver fluoride

Last Answer : Ans:(d)

Which action best accounts for the solubility of aldehydes and ketones in water? (a) Polar interactions between solute molecules. (b) H-bonding between solute molecules. (c) Van der waals forces (d) H-bonding between solute and solvent molecules

Description : Which action best accounts for the solubility of aldehydes and ketones in water? (a) Polar interactions between solute molecules. (b) H-bonding between solute molecules. (c) Van der waals forces (d) H-bonding between solute and solvent molecules

Last Answer : H-bonding between solute and solvent molecules

Define the following : Solute , Solvent , Solution , Aqueous Solution & Solubility.

Description : Define the following : Solute , Solvent , Solution , Aqueous Solution & Solubility.

Last Answer : Ans : Solute : The component of the solution present in smaller amount is called solute. It is also defined as the substance that gets dissolved in the solvent. Example : Glucose is solute in glucose solution. ... grams / 100 grams. Solubility of sugar in water at 100 degree C is 487 grams/100 ml.

Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Description : Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Last Answer : (B) Lubricating oils

Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Description : Which of the following has the lowest viscosity (at a given temperature) of all? (A) Naphtha (B) Kerosene (C) Diesel (D) Lube oil

Last Answer : (A) Naphtha

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

. The main aim of cracking is to produce (A) Gasoline (B) Lube oil (C) Petrolatum (D) Coke

Description : . The main aim of cracking is to produce (A) Gasoline (B) Lube oil (C) Petrolatum (D) Coke

Last Answer : (A) Gasoline

Which of the following can be most effectively used for clarification of lube oil and printing ink? (A) Sparkler filter (B) Pre-coat filter (C) Disc-bowl centrifuge (D) Sharpies super-centrifuge

Description : Which of the following can be most effectively used for clarification of lube oil and printing ink? (A) Sparkler filter (B) Pre-coat filter (C) Disc-bowl centrifuge (D) Sharpies super-centrifuge

Last Answer : (D) Sharpies super-centrifuge

Electrical desalting of crude oil removes the __________ impurities. (A) Oleophilic (B) Oleophobic (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Electrical desalting of crude oil removes the __________ impurities. (A) Oleophilic (B) Oleophobic (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) Oleophobic

The scheme allows the transfer of scrip once the export obligation is complete. Which of the statements given above is/are correct ? (A) 1 only (B) 2 only (C) Both 1 and 2 (D) Neither 1 nor 2

Description : The scheme allows the transfer of scrip once the export obligation is complete. Which of the statements given above is/are correct ? (A) 1 only (B) 2 only (C) Both 1 and 2 (D) Neither 1 nor 2

Last Answer : Answer: Both 1 and 2

Which of the following is/are correct with reference to Abstract class and interface ? (a) A class can inherit only one Abstract class but may inherit several interfaces. (b) An Abstract class can provide complete and default code but an interface has no code. Codes : (A) (a) is true (B) (b) is true (C) Both (a) and (b) are true (D) Neither (a) nor (b) is true

Description : Which of the following is/are correct with reference to Abstract class and interface ? (a) A class can inherit only one Abstract class but may inherit several interfaces. (b) An Abstract class can provide complete and default ... true (C) Both (a) and (b) are true (D) Neither (a) nor (b) is true

Last Answer : Answer: C

Legitimate power is the right to manage derived from delegation based on ownership or property rights. Which of the statements given above is/are correct ? (A) 1 only (B) 2 only (C) Both 1 and 2 (D) Neither 1 nor 2

Description : Legitimate power is the right to manage derived from delegation based on ownership or property rights. Which of the statements given above is/are correct ? (A) 1 only (B) 2 only (C) Both 1 and 2 (D) Neither 1 nor 2

Last Answer : Answer: Both 1 and 2

Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes(B) Increases with the increasing flake size keeping the flake thicknessconstant(C) Increases considerably with the rise of temperature(D) Decreases as the moisture content of flakes increases

Description : Pick out the wrong statement pertaining to solvent extraction of oil. Rate of extraction (A) Decreases with decrease of thickness of the flakes (B) Increases with the increasing flake size ... considerably with the rise of temperature (D) Decreases as the moisture content of flakes increases

Last Answer : (D) Decreases as the moisture content of flakes increases

Glycol added to petrol acts as a/an __________ agent. (A) Anti-knocking (B) Anti-icing (C) Anti-gum forming (D) Dewaxing

Description : Glycol added to petrol acts as a/an __________ agent. (A) Anti-knocking (B) Anti-icing (C) Anti-gum forming (D) Dewaxing

Last Answer : (B) Anti-icing

Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Description : Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Last Answer : (A) A forced vortex occurs when fluid rotates as a solid about an axis

Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions properly and trips generator #1 electrically off the bo A. Start the emergency generator. B. Ascertain cause of the low lube oil pressure. C. Strip the board of all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Description : Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions ... all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Last Answer : Answer: C

Pick up the correct statement from the following: (A) The rate of change of bending moment is equal to rate of shear force (B) The rate of change of shear force is equal to rate of loading (C) Neither (a) nor (b)(D) Both (a) and (b

Description : Pick up the correct statement from the following: (A) The rate of change of bending moment is equal to rate of shear force (B) The rate of change of shear force is equal to rate of loading (C) Neither (a) nor (b) (D) Both (a) and (b

Last Answer : (D) Both (a) and (b

Pick up the incorrect statement from the following: (A) At two meteorologically homogeneous stations, the average annual precipitation is same (B) If the average annual precipitation at two places is same these are meteorologically homogeneous stations (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : Pick up the incorrect statement from the following: (A) At two meteorologically homogeneous stations, the average annual precipitation is same (B) If the average annual precipitation at two places is same these are ... homogeneous stations (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The free water is the amount of water added while mixing and the amount of water held on the surface of the aggregates prior to mixing (B) The total water is the free water and the amount actually absorbed by the aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : Pick up the correct statement from the following: (A) The free water is the amount of water added while mixing and the amount of water held on the surface of the aggregates prior to mixing (B) The total water ... actually absorbed by the aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D