Condensation polymerisation of formaldehyde with __________ does not produce phenolic resin. (A) Resorcinol (B) Phenol (C) Para-cresol (D) Melamine

Condensation polymerisation of formaldehyde with __________ does not
produce phenolic resin.
(A) Resorcinol
(B) Phenol
(C) Para-cresol
(D) Melamine
by

1 Answer

Answer :

(D) Melamine
by

Related questions

__________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine. (A) Epoxy (B) Amino (C) Alkyd (D) Phenolic

Description : __________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine. (A) Epoxy (B) Amino (C) Alkyd (D) Phenolic

Last Answer : (B) Amino

Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Description : Which of the following polymers shows the highest anti-tacking properties? (A) Melamine formaldehyde resin (B) Phenolic resin (C) Epoxy resin (D) Alkyd resin

Last Answer : (A) Melamine formaldehyde resin

Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Description : Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde

Last Answer : (B) Phenol & formaldehyde

Which one of the following polymers is obtained from condensation polymerization? (A) Phenol formaldehyde (B) Carbamide (C) Melamine-formaldehyde (D) All of these

Description : Which one of the following polymers is obtained from condensation polymerization? (A) Phenol formaldehyde (B) Carbamide (C) Melamine-formaldehyde (D) All of these

Last Answer : Answer: Option D

Pick up the synthetic resin from the following: (A) Urea resin (B) Phenolic resin (C) Resorcinol resin (D) All of these

Description : Pick up the synthetic resin from the following: (A) Urea resin (B) Phenolic resin (C) Resorcinol resin (D) All of these

Last Answer : Answer: Option D

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Last Answer : (B) Employs condensation polymerisation

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Last Answer : (B) Employs condensation polymerisation

Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Description : Cation exchange resins used in water treatment is made from __________ resin. (A) Urea formaldehyde (B) Epoxy (C) Amino (D) Phenolic

Last Answer : (A) Urea formaldehyde

Cation exchange resins (0.3 to 1 mm size) used in water treatment is prepared from __________ resins. (A) Epoxy (B) Phenol formaldehyde (C) Urea formaldehyde (D) Melamine formaldehyde

Description : Cation exchange resins (0.3 to 1 mm size) used in water treatment is prepared from __________ resins. (A) Epoxy (B) Phenol formaldehyde (C) Urea formaldehyde (D) Melamine formaldehyde

Last Answer : (C) Urea formaldehyde

Melamine formaldehyde resin which has a very high anti tacking properties, is not used for the (A) Electrical insulation purpose (B) Tanning of leather (C) Strengthening of plaster of Paris (D) Decorative laminates

Description : Melamine formaldehyde resin which has a very high anti tacking properties, is not used for the (A) Electrical insulation purpose (B) Tanning of leather (C) Strengthening of plaster of Paris (D) Decorative laminates

Last Answer : (C) Strengthening of plaster of Paris

Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Description : Which of the following polymers belong to the class of formaldehyde resin? (A) Melamine resins (B) Teflon (C) Dacron (D) None of these

Last Answer : (A) Melamine resins

Pick up the correct statement from the following: (A) Melamine is obtained from calcium carbide (B) Formaldehyde is prepared synthetically from methane (C) The melamine when reacted with formaldehyde forms the melamine-formaldehyde resin (D) All the above

Description : Pick up the correct statement from the following: (A) Melamine is obtained from calcium carbide (B) Formaldehyde is prepared synthetically from methane (C) The melamine when reacted with formaldehyde forms the melamine-formaldehyde resin (D) All the above

Last Answer : Answer: Option D

In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Description : In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Last Answer : (A) Cross linked polystyrene

Which of the following is produced by addition polymerisation? (A) Polybutadiene (B) Phenol formaldehyde (C) Urea-formaldehyde (D) Dacron

Description : Which of the following is produced by addition polymerisation? (A) Polybutadiene (B) Phenol formaldehyde (C) Urea-formaldehyde (D) Dacron

Last Answer : (A) Polybutadiene

Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Description : Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Last Answer : (A) Decorative paint

Phenol formaldehyde resin is used as an adhesive in making (A) Laminates (B) Card boxes (C) Furniture (D) Books

Description : Phenol formaldehyde resin is used as an adhesive in making (A) Laminates (B) Card boxes (C) Furniture (D) Books

Last Answer : (A) Laminates

Bisphenol A is produced by the condensation of acetone with (A) Formaldehyde (B) Ethyl alcohol (C) Diethyl ether (D) Phenol

Description : Bisphenol A is produced by the condensation of acetone with (A) Formaldehyde (B) Ethyl alcohol (C) Diethyl ether (D) Phenol

Last Answer : (D) Phenol

Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Description : Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Last Answer : Answer: Option D

Give the applications of phenol formaldehyde resin.

Description : Give the applications of phenol formaldehyde resin.

Last Answer : 1) For making electric insulator parts like switches, plugs, switchboards, heater-hands, sockets for light bulb, etc. and in wire insulation. 2) Used for making moulded articles like telephone parts, ... ) In paints and varnishes. 7) It is used as hydrogen- exchanger resin in water softening.

During the reaction of Benzene diazonium chloride with para-cresol the substitution occurs at_____position of p-cresol.

Description : During the reaction of Benzene diazonium chloride with para-cresol the substitution occurs at_____position of p-cresol.

Last Answer : During the reaction of Benzene diazonium chloride with para-cresol the substitution occurs at_____position of p-cresol.

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

Polycondensation of saturated dicarboxylic acid with polyhydric alcohol produces (A) Epoxy resin (B) Polyamide (C) Alkyd resin (D) Phenolic resin

Description : Polycondensation of saturated dicarboxylic acid with polyhydric alcohol produces (A) Epoxy resin (B) Polyamide (C) Alkyd resin (D) Phenolic resin

Last Answer : (C) Alkyd resin

Which of the following is not an inhibitory substance governing seed dormancy? (a) Gibberellic acid (b) Abscisic acid (c) Phenolic acid (d) Para-ascorbic acid

Description : Which of the following is not an inhibitory substance governing seed dormancy? (a) Gibberellic acid (b) Abscisic acid (c) Phenolic acid (d) Para-ascorbic acid

Last Answer : a) Gibberellic acid

In the following compounds phenol (I), p-cresol (II), m-nitrophenol (III) and p-nitrophenol (IV), the order of acidity is:

Description : In the following compounds phenol (I), p-cresol (II), m-nitrophenol (III) and p-nitrophenol (IV), the order of acidity is:

Last Answer : In the following compounds phenol (I), p-cresol (II), m-nitrophenol (III) and p- ... `IgtIVgtIIIgtII` C. `IIgtIgtIIIgtIV` D. `IVgtIIIgtIgtII`

Howmany of the following compounds are dissolve in aqeous solution of `NaOH` (1) Phenol (2) p-cresol (3) Benzoic acid (4) Benzene sulphonic acid (5) A

Description : Howmany of the following compounds are dissolve in aqeous solution of `NaOH` (1) Phenol (2) p-cresol (3) Benzoic acid (4) Benzene sulphonic acid (5) A

Last Answer : Howmany of the following compounds are dissolve in aqeous solution of `NaOH` (1) Phenol (2) p-cresol ... P-toluedine (7) Picric acid (8) Squaric acid

Which of the following compounds is most acidic? (a) Phenol (b) m-Nitrophenol (c) m-Cresol (d) m-Bromophenol

Description : Which of the following compounds is most acidic? (a) Phenol (b) m-Nitrophenol (c) m-Cresol (d) m-Bromophenol

Last Answer : m-Nitrophenol

Phenolic water generated in coke ovens & by-product plant attached to an integrated steel plant containing phenol in concentration of less than 100 mg/litre can be removed by (A) Chlorination (B) Treating in biological oxygen pond (C) Chemical coagulation (D) None of these

Description : Phenolic water generated in coke ovens & by-product plant attached to an integrated steel plant containing phenol in concentration of less than 100 mg/litre can be removed by (A) Chlorination (B) Treating in biological oxygen pond (C) Chemical coagulation (D) None of these

Last Answer : (B) Treating in biological oxygen pond

Write the name of monomers of Melamine-Formaldehyde.

Description : Write the name of monomers of Melamine-Formaldehyde.

Last Answer : Ans: Melamine and Formaldehyde. 

__________ is never shipped in glass carboys. (A) Ammonia (B) Acetic acid (C) Phenol (D) Formaldehyde

Description : __________ is never shipped in glass carboys. (A) Ammonia (B) Acetic acid (C) Phenol (D) Formaldehyde

Last Answer : (A) Ammonia

__________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Description : __________ is produced using Polycondensation reaction. (A) Polythene (B) Phenol formaldehyde (C) Poly vinyl chloride (D) None of these

Last Answer : (B) Phenol formaldehyde

Which of the following is not a condensation polymer? (A) Bakelite (B) Melamine polymer (C) Poly-methyl-methacrylate (PMMA) (D) None of these

Description : Which of the following is not a condensation polymer? (A) Bakelite (B) Melamine polymer (C) Poly-methyl-methacrylate (PMMA) (D) None of these

Last Answer : (C) Poly-methyl-methacrylate (PMMA)

Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Last Answer : (D) 250-280

Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99

Description : Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99

Last Answer : (C) 90

90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600

Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600

Last Answer : (C) 250-280

Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Description : Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these

Last Answer : (A) Addition

90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ °C. (A) < 0 (B) 10-30(C) 250-280 (D) 500-600

Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ °C. (A) < 0 (B) 10-30 (C) 250-280 (D) 500-600

Last Answer : (B) 10-30

A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved in the manufacture of (A) Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

Description : A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved ... Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

Last Answer : (D) Urea-formaldehyde resins

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

Which of the following is an elastomer? (A) Thiokol (B) Phenol formaldehyde (C) Urea formaldehyde (D) Polystyrene

Description : Which of the following is an elastomer? (A) Thiokol (B) Phenol formaldehyde (C) Urea formaldehyde (D) Polystyrene

Last Answer : (A) Thiokol

In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Description : In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross￾linked polymer? (A) Bakelite (phenol formaldehyde) (B) Polyester (C) Polythene (D) Nylon-6

Last Answer : (A) Bakelite (phenol formaldehyde)

Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)

Description : Neoprene is the trade name of (A) Polyurethane (B) Phenol formaldehyde (C) Polychlorophrene (D) Styrene butadiene rubber (SBR)

Last Answer : (C) Polychlorophrene

Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Polytetrafluroethylene (PTFE) (D) A monomer

Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Polytetrafluroethylene (PTFE) (D) A monomer

Last Answer : (C) Polytetrafluroethylene (PTFE)

Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermoset phenol formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermoset phenol formaldehyde

Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Description : Bakelite is (A) Same as Polytetrafluoroethylene (PTFE) (B) An inorganic polymer (C) Same as thermosetting phenol-formaldehyde (D) Not a polymer

Last Answer : (C) Same as thermosetting phenol-formaldehyde

Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Description : Catalytic oxidation-dehydrogenation of methyl alcohol produces (A) Formaldehyde (B) Phenol (C) Acetone (D) Maleic anhydride

Last Answer : (A) Formaldehyde

Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Description : Bakelite is chemically known as (A) Polyvinyl chloride (PVC) (B) Polybutadiene (C) Phenol formaldehyde (D) Polyurethane

Last Answer : (C) Phenol formaldehyde