Heat flow in liquid/water by process of

Heat flow in liquid/water by process of
by

1 Answer

Answer :

 Ans. Convection
by
selected by

Related questions

Heat flow in air by process of

Description : Heat flow in air by process of

Last Answer : Ans. Radiation

Heat flow in solid/soil takes place mainly through the process of

Description : Heat flow in solid/soil takes place mainly through the process of

Last Answer : Ans. Conduction

In a liquid-liquid heat exchanger, for the same process temperature, the ratio of the LMTD in parallel flow to the LMTD in counter flow is always (A) < 1 (B) > 1 (C) 1 (D) ∞

Description : In a liquid-liquid heat exchanger, for the same process temperature, the ratio of the LMTD in parallel flow to the LMTD in counter flow is always (A) < 1 (B) > 1 (C) 1 (D) ∞

Last Answer : (A) < 1

The loss of water (contains salts and minerals) through hydathodes in liquid form during night and regulated by root pressure

Description : The loss of water (contains salts and minerals) through hydathodes in liquid form during night and regulated by root pressure

Last Answer : Ans. Guttation

Shrinkage of protoplasm due to outward flow of water (exosmosis) in a concentrate solution.

Description : Shrinkage of protoplasm due to outward flow of water (exosmosis) in a concentrate solution.

Last Answer : Ans. Plasmolysis

Forestry outside the conventional forests which primarily aim at providing continuous flow of goods and services for the benefit of people

Description : Forestry outside the conventional forests which primarily aim at providing continuous flow of goods and services for the benefit of people

Last Answer : Ans. Social forestry

Mass flow or pressure flow theory was given by

Description : Mass flow or pressure flow theory was given by

Last Answer : Ans. Godlewski (1884)

A heat treatment food material at 72°C for 15 seconds, or 63°C for 30 minutes

Description : A heat treatment food material at 72°C for 15 seconds, or 63°C for 30 minutes

Last Answer : Ans. Pasteurization

Solar heat treatment is used to control

Description : Solar heat treatment is used to control

Last Answer : Ans. Loose smut of wheat

How does heat flow in a liquid ?

Description : How does heat flow in a liquid ?

Last Answer : Heat flows in liquids in a convective manner.

The direction of heat flow between two objects depends on - (1) Their masses (2) Their heat contents (3) Their temperatures (4) Whether they are in solid, liquid or gaseous state

Description : The direction of heat flow between two objects depends on - (1) Their masses (2) Their heat contents (3) Their temperatures (4) Whether they are in solid, liquid or gaseous state

Last Answer : (3) Their temperatures Explanation: Heat always flows from a body at higher temperature to a body at a lower temperature.

Which of the following quantities need not be fixed before starting the design of a co-current absorber? (A) Heat gain or loss (B) Flow rate of entering liquid (C) Flow rate of gas (D) None of these

Description : Which of the following quantities need not be fixed before starting the design of a co-current absorber? (A) Heat gain or loss (B) Flow rate of entering liquid (C) Flow rate of gas (D) None of these

Last Answer : (B) Flow rate of entering liquid

Baffles in the shell side of a shell and tube heat exchanger (A) Increase the cross-section of the shell side liquid (B) Force the liquid to flow parallel to the bank (C) Increase the shell side heat transfer co-efficient (D) Decrease the shell side heat transfer co-efficient

Description : Baffles in the shell side of a shell and tube heat exchanger (A) Increase the cross-section of the shell side liquid (B) Force the liquid to flow parallel to the bank (C) Increase the shell side heat transfer co-efficient (D) Decrease the shell side heat transfer co-efficient

Last Answer : (C) Increase the shell side heat transfer co-efficient

The inside heat transfer co-efficient in case of turbulent flow of liquid in the tube side in a 1-2 shell and tube heat exchanger is increased by __________ times, when the number of tube passes is increased to 8. (A) 2 0.8 (B) 4 0.8 (C) 4 0.4 (D) 2 0.4

Description : The inside heat transfer co-efficient in case of turbulent flow of liquid in the tube side in a 1-2 shell and tube heat exchanger is increased by __________ times, when the number of tube passes is increased to 8. (A) 2 0.8 (B) 4 0.8 (C) 4 0.4 (D) 2 0.4

Last Answer : (B) 4 0.8

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

In pipe flow, heat is transferred from hot wall to the liquid by(A) Conduction only (B) Forced convection only (C) Forced convection and conduction (D) Free and forced convection

Description : In pipe flow, heat is transferred from hot wall to the liquid by(A) Conduction only (B) Forced convection only (C) Forced convection and conduction (D) Free and forced convection

Last Answer : (C) Forced convection and conduction

The Graetz number is concerned with the (A) Mass transfer between a gas and a liquid (B) Absorption with chemical reaction (C) Heat transfer in turbulent flow (D) Heat transfer in laminar flow

Description : The Graetz number is concerned with the (A) Mass transfer between a gas and a liquid (B) Absorption with chemical reaction (C) Heat transfer in turbulent flow (D) Heat transfer in laminar flow

Last Answer : (D) Heat transfer in laminar flow

Dittus-Boelter equation used for the determination of heat transfer co￾efficient is valid (A) For fluids in laminar flow (B) For fluids in turbulent flow (C) When Grashoff number is very important (D) For liquid metals

Description : Dittus-Boelter equation used for the determination of heat transfer co￾efficient is valid (A) For fluids in laminar flow (B) For fluids in turbulent flow (C) When Grashoff number is very important (D) For liquid metals

Last Answer : (B) For fluids in turbulent flow

In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining the same, the temperature of the exit liquid will be (A) Less than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Description : In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining ... than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Last Answer : (B) More than 45°C

Pick out the correct statement about the condensation. (A) Filmwise condensation gives a lower heat transfer rate than the dropwise condensation (B) Suitable coating or vapour additive is used to promote film wise condensation (C) If a condensing liquid does not wet the surface dropwise, even then condensation will take place on it (D) Reynolds number of condensing liquid is based on its mass flow rate

Description : Pick out the correct statement about the condensation. (A) Filmwise condensation gives a lower heat transfer rate than the dropwise condensation (B) Suitable coating or vapour additive is used to promote film ... place on it (D) Reynolds number of condensing liquid is based on its mass flow rate

Last Answer : (B) Suitable coating or vapour additive is used to promote film wise condensation

Which of the following is not applicable to liquid fuels? a) the viscosity of a liquid fuel is a measure of its internal resistance to flow. b) the viscosity of all liquid fuels decreases with increase in its temperature c) higher the viscosity of liquid fuels, higher will be its heating value d) viscous fuels need heat tracing

Description : Which of the following is not applicable to liquid fuels? a) the viscosity of a liquid fuel is a measure of its internal resistance to flow. b) the viscosity of all liquid fuels decreases with ... the viscosity of liquid fuels, higher will be its heating value d) viscous fuels need heat tracing

Last Answer : c) higher the viscosity of liquid fuels, higher will be its heating value

The first biological process that begins in a seed soon after in imbibes water

Description : The first biological process that begins in a seed soon after in imbibes water

Last Answer : Ans. Respiration

A process in which the branch of a plant is cut off in order to produce a flush of new shoots

Description : A process in which the branch of a plant is cut off in order to produce a flush of new shoots

Last Answer : Ans. Pollarding

Allocation of treatments to the different experimental units by a random process

Description : Allocation of treatments to the different experimental units by a random process

Last Answer : Ans. Randomization

A process of estimating costs, returns and net profit of a farm or a particular enterprise

Description : A process of estimating costs, returns and net profit of a farm or a particular enterprise

Last Answer : Ans. Farm Budgeting

A process of deciding in the present what to do in the future about the best combination of crops and live stock to be raised

Description : A process of deciding in the present what to do in the future about the best combination of crops and live stock to be raised

Last Answer : Ans. Farm Planning

Two or more products when produced in the same production process called

Description : Two or more products when produced in the same production process called

Last Answer : Ans. Joint product

The process of arranging situations that stimulate and guide learning activities in order to bring desirable changes in the behaviour of people

Description : The process of arranging situations that stimulate and guide learning activities in order to bring desirable changes in the behaviour of people

Last Answer : Ans. Teaching

A process by which an idea or innovation spreads

Description : A process by which an idea or innovation spreads

Last Answer : Ans. Diffusion

The mental process through which individual passes from fires hearing about an innovation to final adoption.

Description : The mental process through which individual passes from fires hearing about an innovation to final adoption.

Last Answer : Ans. Adoption process

The process by which an innovation is communicated through certain channels overtime among the members of a social system

Description : The process by which an innovation is communicated through certain channels overtime among the members of a social system

Last Answer : Ans. Diffusion

The process of working with rural people in an effort to recognize the problems and determine possible solutions.

Description : The process of working with rural people in an effort to recognize the problems and determine possible solutions.

Last Answer : Ans. Programme planning

The process by which human behavior is modified

Description : The process by which human behavior is modified

Last Answer : Ans. Education

An educational process to bring about desirable changes

Description : An educational process to bring about desirable changes

Last Answer : Ans. Extension

A thermal process mostly used for vegetables prior to freezing, drying, or canning in order to soften the texture.

Description : A thermal process mostly used for vegetables prior to freezing, drying, or canning in order to soften the texture.

Last Answer : Ans. Blanching

The important process of cauliflower

Description : The important process of cauliflower

Last Answer : Ans. Blanching

A pruning process in which a circular ring of bark measuring about 3 cm in length is removed.

Description : A pruning process in which a circular ring of bark measuring about 3 cm in length is removed.

Last Answer : Ans. Ringing/Girdling

Which process is involved in the senescence of fruits and vegetables?

Description : Which process is involved in the senescence of fruits and vegetables?

Last Answer : Ans. Respiration

Organic compounds which inhibit or modify any physiological process

Description : Organic compounds which inhibit or modify any physiological process

Last Answer : Ans. Plant Growth Regulators (PGRs)

An energy spending process

Description : An energy spending process

Last Answer : Ans. Photorespiration

The oxidation reduction process is

Description : The oxidation reduction process is

Last Answer : Ans. Photosynthesis

The process by which plants convert light energy of photon (captured from sunrays) into chemical energy

Description : The process by which plants convert light energy of photon (captured from sunrays) into chemical energy

Last Answer : Ans. Photosynthesis

The process of producing a protein from its DNA- and mRNA-coding sequences.

Description : The process of producing a protein from its DNA- and mRNA-coding sequences.

Last Answer : Ans. Gene expression

The process of synthesizing multiple copies of a particular DNA sequence

Description : The process of synthesizing multiple copies of a particular DNA sequence

Last Answer : Ans. Gene cloning

A process of formation of somatic embryos from callus

Description : A process of formation of somatic embryos from callus

Last Answer : Ans. Embryogenesis

A biochemical process or reaction taking place in a test tube (in lab)

Description : A biochemical process or reaction taking place in a test tube (in lab)

Last Answer : Ans. In vitro

The process of using information (genetic material) from DNA to construct m-RNA

Description : The process of using information (genetic material) from DNA to construct m-RNA

Last Answer : Ans. Transcription

The process of separation of chromatids called

Description : The process of separation of chromatids called

Last Answer : Ans. Disjunction

The process of decomposition of organic matter is termed as

Description : The process of decomposition of organic matter is termed as

Last Answer : Ans. Humification

The process by which ions are taken into plant roots

Description : The process by which ions are taken into plant roots

Last Answer : Ans. Absorption