The treatment df for 3 factors each at 2 levels is

The treatment df for 3 factors each at 2 levels is
by

1 Answer

Answer :

 Ans. 2 3 = 6-1 = 5
by
selected by

Related questions

Which of the following factors encourage good ethics in the workplace? (a) Transparency (b) fair treatment to the employees of all levels (c) both (a) and (b) (d) bribe

Description : Which of the following factors encourage good ethics in the workplace? (a) Transparency (b) fair treatment to the employees of all levels (c) both (a) and (b) (d) bribe

Last Answer : . C. BOTH A AND B

In ΔABC and ΔDEF, AB = DE, AB || DE, BC = EF and BC || EF. Vertices A, B and C are joined to vertices D, E and F respectively (see Fig. 8.22). Show that (i) quadrilateral ABED is a parallelogram (ii) quadrilateral BEFC is a parallelogram (iii) AD || CF and AD = CF (iv) quadrilateral ACFD is a parallelogram (v) AC = DF (vi) ΔABC ≅ ΔDEF. -Maths 9th

Description : In ΔABC and ΔDEF, AB = DE, AB || DE, BC = EF and BC || EF. Vertices A, B and C are joined to vertices D, E and F respectively (see Fig. 8.22). Show that (i) quadrilateral ABED is a parallelogram ( ... CF and AD = CF (iv) quadrilateral ACFD is a parallelogram (v) AC = DF (vi) ΔABC ≅ ΔDEF. -Maths 9th

Last Answer : . Solution: (i) AB = DE and AB || DE (Given) Two opposite sides of a quadrilateral are equal and parallel to each other. Thus, quadrilateral ABED is a parallelogram (ii) Again BC = EF and BC || EF ... (Given) BC = EF (Given) AC = DF (Opposite sides of a parallelogram) , ΔABC ≅ ΔDEF [SSS congruency]

In figure, AB || DE, AB = DE, AC|| DF and AC = OF. Prove that BC || EF and BC = EF. -Maths 9th

Description : In figure, AB || DE, AB = DE, AC|| DF and AC = OF. Prove that BC || EF and BC = EF. -Maths 9th

Last Answer : Given In figure AB || DE and AC || DF, also AB = DE and AC = DF To prove BC ||EF and BC = EF Proof In quadrilateral ABED, AB||DE and AB = DE So, ABED is a parallelogram. AD || BE and AD = BE Now, ... = CF and BE||CF [from Eq. (iii)] So, BCFE is a parallelogram. BC = EF and BC|| EF . Hence proved.

In figure, AB || DE, AB = DE, AC|| DF and AC = OF. Prove that BC || EF and BC = EF. -Maths 9th

Description : In figure, AB || DE, AB = DE, AC|| DF and AC = OF. Prove that BC || EF and BC = EF. -Maths 9th

Last Answer : Given In figure AB || DE and AC || DF, also AB = DE and AC = DF To prove BC ||EF and BC = EF Proof In quadrilateral ABED, AB||DE and AB = DE So, ABED is a parallelogram. AD || BE and AD = BE Now, ... = CF and BE||CF [from Eq. (iii)] So, BCFE is a parallelogram. BC = EF and BC|| EF . Hence proved.

In Fig. 8.53,ABCD is a parallelogram and E is the mid - point of AD. A line through D, drawn parallel to EB, meets AB produced at F and BC at L.Prove that (i) AF = 2DC (ii) DF = 2DL -Maths 9th

Description : In Fig. 8.53,ABCD is a parallelogram and E is the mid - point of AD. A line through D, drawn parallel to EB, meets AB produced at F and BC at L.Prove that (i) AF = 2DC (ii) DF = 2DL -Maths 9th

Last Answer : Given, E is mid point of AD Also EB∥DF ⇒ B is mid point of AF [mid--point theorem] so, AF=2AB (1) Since, ABCD is a parallelogram, CD=AB ⇒AF=2CD AD∥BC⇒LB∥AD In ΔFDA ⇒LB∥AD ⇒LDLF​=ABFB​=1 from (1) ⇒LF=LD so, DF=2DL

Consider the following DataFrame df and answer questions. rollno name UT1 UT2 UT3 UT4 1 Prerna Singh 24 24 20 22 -Technology

Description : Consider the following DataFrame df and answer questions. rollno name UT1 UT2 UT3 UT4 1 Prerna Singh 24 24 20 22 -Technology

Last Answer : (i) (b)print(df.max())(ii) (a)df1=df[df[‘rollno’]==4]print(df1)(d)df1=df[df.rollno==4]print(df1)(iii)(a)both (i) and (ii)(iv)(d) both (i) and (ii)(v)(b)df [‘Grade’]=[’A’,’B’,’A’,’A’,’B’,’A’]

Mexico City, DF, Mexico?

Description : Mexico City, DF, Mexico?

Last Answer : Mexico City is the capital of Mexico and the largest city in theworld. Filled with vast historical markers and cutting edge modernarchitecture, this cultural melting pot where old meets new ... a natural wonder.Aside from glorious beauty and historical landmarks, Mexico Cityoffers every modern c

ECE Board Exam April 1997 Sound intensity is given as A. df/dP B. dE/dp C. dA/dP D. dP/dA

Description : ECE Board Exam April 1997 Sound intensity is given as A. df/dP B. dE/dp C. dA/dP D. dP/dA

Last Answer : D. dP/dA

Half the angle of nip, (α), for a roll crusher is given by (where, dr, dp and df are diameters of crushing rolls, feed particles and rolls gap respectively). (A) cos α = (dr + dp)/(dr + df) (B) cos α = (dr + df)/(dr + dp) (C) tan α = (dr + dp)/(dr + df) (D) sin α = (dr + dp)/(dr + df)

Description : Half the angle of nip, (α), for a roll crusher is given by (where, dr, dp and df are diameters of crushing rolls, feed particles and rolls gap respectively). (A) cos α = (dr + dp)/(dr + df) (B) cos α = (dr + df)/(dr + dp) (C) tan α = (dr + dp)/(dr + df) (D) sin α = (dr + dp)/(dr + df)

Last Answer : (A) cos α = (dr + dp)/(dr + df)

In ball mill operation, the feed size (Df in meters) and the ball diameter (Db in metres) are related as (where, K = grindability constant (varying from 0.9 to 1.4 in increasing order of hardness)) (A) Db 2 = K.Df (B) Db = K.Df (C) Db 3 = K.Df (D) Db 2 = K.Df

Description : In ball mill operation, the feed size (Df in meters) and the ball diameter (Db in metres) are related as (where, K = grindability constant (varying from 0.9 to 1.4 in increasing order of hardness)) (A) Db 2 = K.Df (B) Db = K.Df (C) Db 3 = K.Df (D) Db 2 = K.Df

Last Answer : (A) Db 2 = K.Df

The reduction ratio for grinders is defined as (where, Df and Dp are average diameters of feed and product respectively). (A) Df /Dp (B) Dp /Df (C) Df - Dp (D) None of these

Description : The reduction ratio for grinders is defined as (where, Df and Dp are average diameters of feed and product respectively). (A) Df /Dp (B) Dp /Df (C) Df - Dp (D) None of these

Last Answer : (A) Df /Dp

In given figure, AD = 3 cm, AE = 5 cm, BD = 4 cm, CE = 4 cm, CF = 2 cm, BF = 2.5 cm, then (a) DE || BC (b) DF || AC (c) EF || AB (d) none of

Description : In given figure, AD = 3 cm, AE = 5 cm, BD = 4 cm, CE = 4 cm, CF = 2 cm, BF = 2.5 cm, then (a) DE || BC (b) DF || AC (c) EF || AB (d) none of

Last Answer : (c) EF || AB

Which of the following relationship is valid for the equilibrium position of the float in a Rotameter? (Where, Df= Drag force on the float Bf = Buoyant force on the float Wf = Weight of the float). (A) Df + Bf = Wf (B) Df = Bf + Wf (C) Df + Bf + Wf =0 (D) None of these

Description : Which of the following relationship is valid for the equilibrium position of the float in a Rotameter? (Where, Df= Drag force on the float Bf = Buoyant force on the float Wf = Weight of the float). (A) Df + Bf = Wf (B) Df = Bf + Wf (C) Df + Bf + Wf =0 (D) None of these

Last Answer : (A) Df + Bf = Wf

For a base failure of a slope, depth factor (A) Df = 1(B) Df < 1 (C) Df > 1 (D) None of these

Description : For a base failure of a slope, depth factor (A) Df = 1 (B) Df < 1 (C) Df > 1 (D) None of these

Last Answer : (C) Df > 1

For an irreversible process involving only pressure-volume work (A) (dF)T, p <0 (B) (dF)T, p = 0 (C) (dF)T, p > 0 (D) (dA)T, v >0

Description : For an irreversible process involving only pressure-volume work (A) (dF)T, p 0 (D) (dA)T, v >0

Last Answer : (A) (dF)T, p

For a reversible process involving only pressure-volume work (A) (dF)T, p < 0 (B) (dF)T, p > 0 (C) (dF)T, p = 0 (D) (dA)T, v < 0

Description : For a reversible process involving only pressure-volume work (A) (dF)T, p < 0 (B) (dF)T, p > 0 (C) (dF)T, p = 0 (D) (dA)T, v < 0

Last Answer : (C) (dF)T, p = 0

State the use of OF and DF flags of 8086 microprocessor.

Description : State the use of OF and DF flags of 8086 microprocessor.

Last Answer : Overflow Flag: This flag is set if an overflow occurs, i.e. if the result of a signed operation is large enough to be accommodated in destination register. Direction Flag: It selects either increment or decrement mode for DI &/or SI register during string instructions.

In a split plot design, 5 levels of main plot and 4 levels of sub plot treatments studied with 3 replications. What will be the d.f. for error b source?

Description : In a split plot design, 5 levels of main plot and 4 levels of sub plot treatments studied with 3 replications. What will be the d.f. for error b source?

Last Answer : Ans. 30

To study two factors with different level of precision, which design is used

Description : To study two factors with different level of precision, which design is used

Last Answer : Ans. Split plot design

The most appropriate design, when all factors are not of equally important in experimentation.

Description : The most appropriate design, when all factors are not of equally important in experimentation.

Last Answer : Ans. Split Plot Design (SPD)

The variation due to uncontrolled factors

Description : The variation due to uncontrolled factors

Last Answer : Ans. Experimental error

If an interaction effect is confounded with all the replicates of the treatment

Description : If an interaction effect is confounded with all the replicates of the treatment

Last Answer : Ans. Complete/total confounding

In LSD, the no. of row or column or treatment is equal to

Description : In LSD, the no. of row or column or treatment is equal to

Last Answer : Ans. No. of replications (r = c = t)

A heat treatment food material at 72°C for 15 seconds, or 63°C for 30 minutes

Description : A heat treatment food material at 72°C for 15 seconds, or 63°C for 30 minutes

Last Answer : Ans. Pasteurization

Solar heat treatment is used to control

Description : Solar heat treatment is used to control

Last Answer : Ans. Loose smut of wheat

Loose smut of wheat can be controlled by seed treatment with

Description : Loose smut of wheat can be controlled by seed treatment with

Last Answer : Ans. Vitavax

All of the following factors may increase the risk of nephrotoxicity from gentamicin therapy except (a) age over 70 years (b) prolonged courses of gentamicin therapy (c) concurrent amphotericin B therapy (d) trough gentamicin levels below 2 mg/ml (e) concurrent cisplatin therapy

Description : All of the following factors may increase the risk of nephrotoxicity from gentamicin therapy except (a) age over 70 years (b) prolonged courses of gentamicin therapy (c) concurrent amphotericin B therapy (d) trough gentamicin levels below 2 mg/ml (e) concurrent cisplatin therapy

Last Answer : Ans: D

Which of the following factors is responsible for the formation of concentrated urine? (a) Hydrostatic pressure during glomerular filtration. (b) Low levels of antidiuretic hormone. (c) Maintaining hyperosmolarity towards the medullary interstitium in the kidneys. (d) Secretion of erythropoietin by Juxtaglomerular complex.

Description : Which of the following factors is responsible for the formation of concentrated urine? (a) Hydrostatic pressure during glomerular filtration. (b) Low levels of antidiuretic hormone. (c) ... the medullary interstitium in the kidneys. (d) Secretion of erythropoietin by Juxtaglomerular complex.

Last Answer : (c) Maintaining hyperosmolarity towards the medullary interstitium in the kidneys.

Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second shift, and MTBF. d. wage and benefit rates, automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Description : Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second ... , automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Last Answer : d. wage and benefit rates, automation levels, and second shift.

Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Description : Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Last Answer : e. b, c, d

An important feature of maple syrup urine disease is (A) Patient can not be treated by dietary regulation (B) Without treatment death, of patient may occur by the end of second year of life (C) Blood levels of leucine, isoleucine and serine are increased (D) Excessive brain damage

Description : An important feature of maple syrup urine disease is (A) Patient can not be treated by dietary regulation (B) Without treatment death, of patient may occur by the end of second year of life (C) Blood levels of leucine, isoleucine and serine are increased (D) Excessive brain damage

Last Answer : Answer : D

Von Willebrand’s disease is a common, congenital bleeding disorder. Which of the following statement(s) is/are true concerning Von Willebrand’s disease? a. As in hemophilia, it is much more common in men b. A history of spontaneous bleeding is common c. Screening laboratory tests will include a prolonged aPTT with a normal prothrombin time d. Pre-treatment for elective surgery require administration of cryoprecipitate to achieve levels of 23–50% of normal

Description : Von Willebrand's disease is a common, congenital bleeding disorder. Which of the following statement(s) is/are true concerning Von Willebrand's disease? a. As in hemophilia, it is ... -treatment for elective surgery require administration of cryoprecipitate to achieve levels of 23-50% of normal

Last Answer : Answer: c, d Von Willebrand's factor is an adhesive protein that mediates platelet adhesion to collagen. In addition, it protects and prevents the rapid removal of factor VIII ... platelet aggregation responses to ristocetin. The most reliable source of Von Willebrand's factor is cryoprecipitate

Tests of coagulation are used to monitor anticoagulation treatment and detect intrinsic abnormalities in coagulation. Which of the following statement(s) is/are true concerning coagulation tests? a. Prothrombin time (PT) measures both the intrinsic and extrinsic clotting pathways and fibrinogen b. Activated partial thromboplastin time (aPTT) can be used to monitor both oral anticoagulation with Warfarin and intravenous anticoagulation with heparin c. Thrombin clotting time (TCT) is a measurement of the time it takes for exogenously administered thrombin to turn plasma fibrinogen into fibrin clot d. Whole blood activated clotting time (ACT) is a measurement of the ability of whole blood to clot and is used to monitor heparin levels intraoperatively during cardiovascular and peripheral vascu

Description : Tests of coagulation are used to monitor anticoagulation treatment and detect intrinsic abnormalities in coagulation. Which of the following statement(s) is/are true concerning ... is used to monitor heparin levels intraoperatively during cardiovascular and peripheral vascular operations

Last Answer : Answer: a, c, d Coagulation tests include prothrombin time (PT), which measures the intrinsic and extrinsic pathways of fibrinogen production and is the most common method for ... more while for peripheral vascular applications, values of 250 seconds or greater are considered appropriate

Disaster management is aimed ata. Resettling people in the closest unaffected urban area b. Collection of valuable data for future management objectives c. Strengthening sewage and drinking water treatment facilities to resist the impact of a future disaster d. Restoring a communitys services, facilities and residences to pre-disaster levels

Description : Disaster management is aimed ata. Resettling people in the closest unaffected urban area a. Resettling people in the closest unaffected urban area b. Collection of valuable data for future ... a future disaster d. Restoring a communitys services, facilities and residences to pre-disaster levels

Last Answer : d. Restoring a communitys services, facilities and residences to pre-disaster levels

Circulating testosterone levels in men are elevated during treatment with: A. Danazol B. Finasteride C. Flutamide D. Ketoconazole

Description : Circulating testosterone levels in men are elevated during treatment with: A. Danazol B. Finasteride C. Flutamide D. Ketoconazole

Last Answer : C. Flutamide

A self supporting community - plants and animals interacting with each other and the nonliving environment to provide a balanced system is a

Description : A self supporting community - plants and animals interacting with each other and the nonliving environment to provide a balanced system is a

Last Answer : Ans. Ecosystem

The line by which all the least cost combination points are joined to each other

Description : The line by which all the least cost combination points are joined to each other

Last Answer : Ans. Expansion Path

In which planting system, a tree is planted on a corner of each angle

Description : In which planting system, a tree is planted on a corner of each angle

Last Answer : Ans. Triangle System

Characters which are governed/controlled by several genes each having small individual effect.

Description : Characters which are governed/controlled by several genes each having small individual effect.

Last Answer : Ans. Polygenic Traits

A variety produced by crossing in all combinations a number of lines that combine well each other

Description : A variety produced by crossing in all combinations a number of lines that combine well each other

Last Answer : Ans. Synthetic variety

A method in which desirable scattered favourable genes are selected in different plants in each generation

Description : A method in which desirable scattered favourable genes are selected in different plants in each generation

Last Answer : Ans. Recurrent selection