What is the measurement of a straight line angle?

What is the measurement of a straight line angle?
by

1 Answer

Answer :

180 degrees
by

Related questions

The distance between the towns is only 30 kms as the crow flies. (1) when measured in a straight line (2) when measured in a random manner (3) when measured between the two highest points (4) when the curves of the road are included in the measurement

Description : The distance between the towns is only 30 kms as the crow flies. (1) when measured in a straight line (2) when measured in a random manner (3) when measured between the two highest points (4) when the curves of the road are included in the measurement

Last Answer : 1) when measured in a straight line

A object moves with uniform positive acceleration. Its velocity-time graph will be (a) A straight line parallel to the time axis (b) A straight line inclined at an obtuse angle to the time axis (c) A straight line inclined at an acute angle to the time axis (d) None of these. -Science

Description : A object moves with uniform positive acceleration. Its velocity-time graph will be (a) A straight line parallel to the time axis (b) A straight line inclined at an obtuse angle to the time axis (c) A straight line inclined at an acute angle to the time axis (d) None of these. -Science

Last Answer : Answer is (c)

When a graph is plotted between log x/m and log p, it is straight line with an angle `45^(@)` and intercept 0.3010 on y - axis. If initial pressure is

Description : When a graph is plotted between log x/m and log p, it is straight line with an angle `45^(@)` and intercept 0.3010 on y - axis. If initial pressure is

Last Answer : When a graph is plotted between log x/m and log p, it is straight line with an angle `45 ... adsorbent : (Report your answer after multiplying by 10)

Which one of the following statements is true for Mohr-Coulomb envelope? (A) Coulomb suggests that the relationship between shear strength and normal stress, is adequately represented by the straight line (B) The generalised Mohr theory suggests that, though the shear stress depends on the normal stress, the relation is not linear (C) Coulomb and Mohr suggest that a definite relationship exists among the principal stress and the angle of internal friction (D) All the above

Description : Which one of the following statements is true for Mohr-Coulomb envelope? (A) Coulomb suggests that the relationship between shear strength and normal stress, is adequately represented by the straight line ... exists among the principal stress and the angle of internal friction (D) All the above

Last Answer : Answer: Option D

In the figure angle E measures 30 and deg angle F measures 57 and deg and angle B measures 27 and deg. What is the measurement of angle A?

Description : In the figure angle E measures 30 and deg angle F measures 57 and deg and angle B measures 27 and deg. What is the measurement of angle A?

Last Answer : Feel Free to Answer

In the figure angle D measures 71 and deg and angle G measures 37 and deg. What is the measurement of angle A?

Description : In the figure angle D measures 71 and deg and angle G measures 37 and deg. What is the measurement of angle A?

Last Answer : Feel Free to Answer

______ is the measurement of a unilateral antenna properties of directivity A. Phase angle B. Antenna gain C. Beamwidth D. Bandwidth

Description : ______ is the measurement of a unilateral antenna properties of directivity A. Phase angle B. Antenna gain C. Beamwidth D. Bandwidth

Last Answer : C. Beamwidth

If a gauge is installed perpendicular to the slope, its measurement is reduced by multiplying (A) Sine of the angle of inclination with vertical (B) Cosine of the angle of inclination with vertical (C) Tangent of the angle of inclination with vertical (D) Calibration coefficient of the gauge

Description : If a gauge is installed perpendicular to the slope, its measurement is reduced by multiplying (A) Sine of the angle of inclination with vertical (B) Cosine of the angle of inclination with vertical (C) Tangent of the angle of inclination with vertical (D) Calibration coefficient of the gauge

Last Answer : Answer: Option B

These are main components of Electronic Stability control system a) Speed Sensor b) Steering angle measurement angle c) Yaw-rate sensor d) All of the above

Description : These are main components of Electronic Stability control system a) Speed Sensor b) Steering angle measurement angle c) Yaw-rate sensor d) All of the above

Last Answer : d) All of the above

Describe the use of digital theodolite for measurement of horizontal and vertical angle.

Description : Describe the use of digital theodolite for measurement of horizontal and vertical angle.

Last Answer : I) Procedure for measurement of horizontal angle with digital theodolite: 1) Taking out digital theodolite for box and fix it on tripod over required station. 2) Approximate leveling by leg adjustment and ... and take the reading at B. 9) Difference of two angle gives required vertical angle AOB

State the procedure of measurement of horizontal angle by repetition method.

Description : State the procedure of measurement of horizontal angle by repetition method. 

Last Answer : The horizontal angle is measured very precisely using method of repetition as follows : 1) Set-up the theodolite over station O and level it properly. 2) Set the vernier A and vernier B at 0°0'0 ... repeat the same procedure. 9) The mean of both angles gives the horizontal angle AOB. 

State the procedure for measurement of deflection angle by transit theodolite

Description : State the procedure for measurement of deflection angle by transit theodolite

Last Answer : Procedure: 1. Set up the theodolite at Q and level it accurately. 2. With both plate clamped, the vernier A reading 360o take back sight on P (i.e bisect ranging rod at ... angle is doubled and hence, one half of this average value gives the accurate value of deflection angle at Q. 

Explain the procedure for measurement of vertical angle using digital theodolite

Description : Explain the procedure for measurement of vertical angle using digital theodolite

Last Answer : Digital Theodolite for measurement of vertical angle. 1)Taking out digital theodolite for box and fix it on tripod over required station. 2) Accurate centering and aapproximate leveling by leg ... required vertical angle from zenith point or horizantal plane as per setting of the instrument. 

Explain the procedure of measurement of deflection angle.

Description : Explain the procedure of measurement of deflection angle.

Last Answer : Procedure: 1. The theodolite is set up at B and centered and leveled properly . Vernier A is set at 0 0.and B at 1800 .The lower one is loosened. By turning the telescope the ranging rod at A ... The average angle of two faces is calulated. One half of this angle will be the deflection angle.

Why do lobsters usually walk at an angle and not straight forward?

Description : Why do lobsters usually walk at an angle and not straight forward?

Last Answer : My guess (and it is just that) is that it has to do with the fact that their eyes are placed on the side of their head. By walking sideways they can see where they are going as well as “watch their back” at the same time.

What is the acute angle between the two straight lines y = ( ) 2– 3 x + 5 and y = ( ) 2 3 + x – 7 ? -Maths 9th

Description : What is the acute angle between the two straight lines y = ( ) 2– 3 x + 5 and y = ( ) 2 3 + x – 7 ? -Maths 9th

Last Answer : (a) 60ºThe two lines are: y = \((2-\sqrt3)\) \(x\) + 5 ...(i) y = \((2-\sqrt3)\) \(x\) - 7 ...(ii) Slope of line (i), m1 = \(2-\sqrt3\)Slope of line (ii), m2 = \(2 ... \sqrt3)}{1+(2-\sqrt3)(2+\sqrt3)}\bigg|\)= \(\bigg|rac{-2\sqrt3}{1+1}\bigg|=\sqrt3\)∴ θ = -1 tan ( 3) = 60º.

If adjacent equal sized angles are needed to form a straight angle how big is each angle?

Description : If adjacent equal sized angles are needed to form a straight angle how big is each angle?

Last Answer : Each angle is 180/5 = 36 degrees

If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum deflection angle to locate its junction point, is (A) 1°43' 08" (B) 1°43' 18" (C) 1°43' 28" (D) 1°43' 38"

Description : If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum deflection angle to locate its junction point, is (A) 1°43' 08" (B) 1°43' 18" (C) 1°43' 28" (D) 1°43' 38"

Last Answer : (C) 1°43' 28"

In a lemniscate curve the ratio of the angle between the tangent at the end of the polar ray and the straight, and the angle between the polar ray and the straight, is (A) 2 (B) 3 (C) 4/3 (D) 3/2

Description : In a lemniscate curve the ratio of the angle between the tangent at the end of the polar ray and the straight, and the angle between the polar ray and the straight, is (A) 2 (B) 3 (C) 4/3 (D) 3/2

Last Answer : (D) 3/2

The greatest induced EMF will occur in a straight wire moving at constant speed through a uniform magnetic field when the angle between the direction of the wire's motion and the direction of the magnetic field is w) 0 degrees x) 30 degrees y) 60 degrees z) 90 degrees

Description : The greatest induced EMF will occur in a straight wire moving at constant speed through a uniform magnetic field when the angle between the direction of the wire's motion and the direction of the magnetic field is w) 0 degrees x) 30 degrees y) 60 degrees z) 90 degrees

Last Answer : ANSWER: Z -- 90 DEGREES

A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Description : A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Last Answer : Inductance is expressed in micro henrys per unit length, capacitance is expressed in picofarads per unit length, and resistance is expressed in ohms per unit length.

The length of line measured by 20 m chain was found to be 751 m. The chain was tested before start of measurement and was found correct. The chain was again tested after measurement and was found 6 cm too short. What shall be the correct length of line ?

Description : The length of line measured by 20 m chain was found to be 751 m. The chain was tested before start of measurement and was found correct. The chain was again tested after measurement and was found 6 cm too short. What shall be the correct length of line ?

Last Answer : Given Data: Standard length of chain (L)= 20m Measured Length (M.L.) = 751 m Error before start of measurement = 0.0 Error after measurement = 6 cm = 0.06 m To Find: Actual length or Correct length Solution: ... (L'/L)  = (751) x (19.97/20)  = 749.87 Correct length of line is 749.87 m