Write the stages involved in sterilization of surgical dressing.

Write the stages involved in sterilization of surgical dressing. 
by

1 Answer

Answer :

Stages of sterilisation are:

1) Pack or wrap the unsterilized surgical dressing into a suitable device/perforated container or any packaging material i.e parchment paper.

2) Load this container into sterilizer. Loading ang packaging should be done properly to ensure the uniform steam penetration and movement.

3) Close the sterilizer and expose the surgical dressing at 121°C for 30-45 min.

4) Switch off the sterilizer and condense the steam in it, allow to cool and unload the sterilizer.

5) Containers are labelled with date of sterilization to prevent overload storage.
by

Related questions

Write in detail about moist heat method of sterilization

Description : Write in detail about moist heat method of sterilization

Last Answer : Principle: The steam has more penetration power than dry heat and thermal capacity of steam is more than thermal capacity of dry heat. The method is useful for killing of bacterial spores. ... for powder or oils. It is not suitable for sterilization of plastic which melt at 1150C.

Write the disadvantages of formaldehyde gas when used for sterilization.

Description : Write the disadvantages of formaldehyde gas when used for sterilization.

Last Answer : i. Weak penetration power. ii. Difficult to maintain high conc. iii. Require high humidity for effectiveness. iv. Readily inactivated. v. Irritant to respiratory tract. vi. Difficult to remove adsorbed gas. 

Define: i) Sterilization ii) Disinfection Classify different methods of sterilization.

Description : Define: i) Sterilization ii) Disinfection Classify different methods of sterilization.

Last Answer : i) Sterilization: Sterilization is a process of complete destruction of all micro-organisms & their spores present in a system. ii) Disinfection: A process that removes the infection potential by ... ) Seitz filters 3) Sintered glass filters 4) Sintered metal filters 5) Membrane filters

Describe construction and working of equipment used for moist heat sterilization.

Description : Describe construction and working of equipment used for moist heat sterilization. 

Last Answer : Moist heat sterilizer or Autoclave:  Diagram:  Construction:  It consists of a string metallic chamber usually made of stainless steel. It has a cover fitted with a steam vent, pressure gauze ... whole of the steam is removed, the lid is opened and the sterilized material is taken out.

Discuss in brief gaseous sterilization using ethylene oxide.

Description : Discuss in brief gaseous sterilization using ethylene oxide. 

Last Answer : Gaseous sterilization using Ethylene oxide:  It is gas at room temperature, highly inflammable & forms explosive mixture with air. This disadvantage can be overcome by using mixture of 10% ethylene ... toxic & inflammable gas. Sophisticated instruments are required & skilled persons are needed.

Differentiate between sterilization and Disinfection. Enlist the different methods of sterilization.

Description : Differentiate between sterilization and Disinfection. Enlist the different methods of sterilization.

Last Answer : Sterilization Disinfection It is the process of complete destruction of microorganisms present in the system It is process that removes infection potential by microorganisms In case of ... Seitz filters 3. Sintered glass filters 4. Sintered metal filters 5. Membrane filters

Discuss in brief about gaseous sterilization.

Description : Discuss in brief about gaseous sterilization.

Last Answer : Gaseous sterilization using Ethylene oxide: Ethylene oxide: It is colourless gas at room temperature. It can be liquefied easily and boil at 10.80C. It is highly ... contamination & penetrability of material . Others gases used are formaldehyde and Beta-propiolactone.

Describe dry heat method of sterilization in detail.

Description : Describe dry heat method of sterilization in detail.

Last Answer : Principle: All the microorganism including spores are destroyed. Principle of killing is by dehydration and oxidation of essential metabolites. In hot air oven heating is done at 1600 C for 2 hours. ... off the oven. Allow to cool. Take out the material.  Diagram:

Give principle, method and application of sterilization using UV radiation.

Description : Give principle, method and application of sterilization using UV radiation.

Last Answer : Principle:   Direct sunlight can destroy the microorganism on account of its ultra-violet rays of longer wave length. UV light of shorter wavelength kills or inactivates microorganisms by ... . Sterilization of thermolabile material. Sterilization of surface of working table.

Give the significance of sterilization using bactericidal solution, explain the method and name the bactericidal agents.

Description : Give the significance of sterilization using bactericidal solution, explain the method and name the bactericidal agents.

Last Answer : Significance: The lethal effect of bactericide increases with the rise of temperature. This method is used for sterilizing aqueous preparation, which is unstable at the higher temperature, hence moist heat ... minutes in boiling water. IP 1985 permitted the use of following bactericides

Give advantages, disadvantages and applications of sterilization by ionising radiation.

Description : Give advantages, disadvantages and applications of sterilization by ionising radiation.

Last Answer : Advantages: The method is reliable and can be accurately controlled No degradation of media during sterilization, thus it can be used for thermally labile media Gamma rays have ... Bones and tissue transplant, plastic tubing, catheters and sutures. Sterilization of thermolabile medicaments. 

Define sterilization. Classify different methods used for sterilization.

Description : Define sterilization. Classify different methods used for sterilization.

Last Answer : Sterilization: It is the process of complete destruction of microorganisms present in the system Different methods of Sterilization : I. Physical methods 1. Dry heat sterilization 2. Moist heat ... filters 3. Sintered glass filters 4. Sintered metal filters 5. Membrane filters

State and explain the stages of simple Percolation

Description : State and explain the stages of simple Percolation

Last Answer : Stages of Percolation:- a) Imbibition b) Maceration c) Percolation a) Imbibition :-   1) Powders drug is moistened with a sufficient quantity of menstruum & allowed to stand for 4 hrs in ... constituents present in the drug by the slow passage of the menstruum through the column of the drug.

Describe the stages of percolations

Description : Describe the stages of percolations 

Last Answer : a. Imbibition: Drug is kept is moistened with sufficient quantity of menstruum. Allow to stand for 4 hr. Significance: i. It allow the swelling of tissue of drug before packing. ii. It ... and extraction. After collecting 3/4th volume of product then marc is pressed. Mix the liquids.

Describe various stages of sugar coating.

Description : Describe various stages of sugar coating. 

Last Answer : Steps of sugar coating of tablet:-  i) Sieving ii) Sealing iii) Sub-coating iv) Syrup coating v) Finishing vi) Polishing i) Sieving :- The tablets to be coated are shaken in a suitable ... so the wax coated tablets are rubbed on the canvas cloth. This gives a proper shining to the tablets

What surgical practice was established by Lister? a. antisepsis b. chemotherapy c. variolation d. sterilization

Description : What surgical practice was established by Lister? a. antisepsis b. chemotherapy c. variolation d. sterilization

Last Answer : a. antisepsis

Give steps involved in moist granulation.

Description : Give steps involved in moist granulation.

Last Answer : Steps: i. Moisten of Medicament with excipients with granulating agent. ii. Sieving of moist mass through sieve number 8 or 10. iii. Drying of wet granules in hot air oven at ... sieve number 20 to collect granules of uniform size v. Lubrication of sifted granules with lubricating agent

State and explain the steps involved in sugar coating of tablet.

Description : State and explain the steps involved in sugar coating of tablet.

Last Answer : Steps of sugar coating of tablet: Sieving Sealing Sub-coating Syrup coating Finishing Polishing i) Sieving :- The tablets to be coated are shaken in a suitable sieve to remove the fine ... on the canvas cloth. This gives a proper shining to the tablets Sugar coating is an art 

What are the different mechanisms involved in the method of size reduction.

Description : What are the different mechanisms involved in the method of size reduction.

Last Answer : Cutting. Compression. Impact Attrition Combined impact and attrition 

Define microencapsulation.What are its advantages and different techniques involved in it?

Description : Define microencapsulation.What are its advantages and different techniques involved in it?

Last Answer : Microencapsulation : it is the technique in which a thin coating is applied on the particles of solids, liquids, resulting in the formation of micro-capsules ranging from micron to ... 4) Electrostatic Deposition 5) Vacuum deposition 6) Polymerization 7) Multiorific Centrifugal Process.

Explain the different steps involved in sugar coating of tablet.

Description : Explain the different steps involved in sugar coating of tablet.

Last Answer : Steps of sugar coating of tablet:-  Sieving Sealing Sub-coating Syrup coating Finishing Polishing i) Sieving :- The tablets to be coated are shaken in a suitable sieve to remove the ... the wax coated tablets are rubbed on the canvas cloth. This gives a proper shining to the tablets

What do you mean by reserved percolation? Enlist different steps involved in it.

Description : What do you mean by reserved percolation? Enlist different steps involved in it.

Last Answer : Reserve percolation:   In this process a part of percolate, generally 3/4th volume of the finished preparation is reserved.(contains high solute concentration) Then the percolation process is continued ... :  a. Imbibition, b. Maceration, c. Percolation, d. Distillation or evaporation.

List the steps involved in slugging process

Description : List the steps involved in slugging process

Last Answer : i) Sieving ii) Weighing iii) Blending iv) Slugging v) Screening vi) Blending vii) Compression Or. Drug + Excipients → Blending → Slugging(formation of big size tablet) → Screening → Blending → Compression.

There are a multitude of various dressings available. Which of the following statement(s) is/are true concerning options for surgical dressings? a. Hydrocolloids, such as karaya compounds, offer the primary advantage of increased absorptive ability b. Films, such as Op-site, provide a water impermeable environment to achieve a dry wound c. Impregnates are fine gauze impregnated with a variety of substances such as antibiotics or moisturizing agents that adhere tightly to the wound and do not require a secondary dressing d. Absorptive powders and paste are highly useful in debriding necrotic and fibrous material from wounds and absorbing wound serum

Description : There are a multitude of various dressings available. Which of the following statement(s) is/are true concerning options for surgical dressings? a. Hydrocolloids, such as karaya compounds, offer ... are highly useful in debriding necrotic and fibrous material from wounds and absorbing wound serum

Last Answer : Answer: a, d Although the simplest dressing of gauze and tape combined with the use of antibacterial ointment can achieve moist wound healing in most patients. A multitude of other ... agents have high absorbency for tissue wound fluid and debride necrotic and fibrous material from the wound

Which of the following statement(s) is/are correct concerning the management of an open wound? a. Frequent surgical debridement is usually necessary b. Water irrigation can effectively debride most wounds c. Hydrogen peroxide is particularly useful in the management of open wounds d. A number of the newer dressing products have clearly been shown to promote wound healing compared to simple moist occlusive dressing

Description : Which of the following statement(s) is/are correct concerning the management of an open wound? a. Frequent surgical debridement is usually necessary b. Water irrigation can effectively debride ... products have clearly been shown to promote wound healing compared to simple moist occlusive dressing

Last Answer : Answer: b Although there are numerous dressing products commercially available at present, no treatment has been demonstrated to improve healing beyond that of standard treatment which adheres to basic ... healing is achieved, there has been no evidence that one product is better than another

Which of the following actions is most appropriate for the nurse to take when the patient demonstrates subcutaneous emphysema along the suture line or chest dressing 2 hours after chest surgery? a) Record the observation. Subcutaneous emphysema occurs after chest surgery as the air that is located within the pleural cavity is expelled through the tissue opening created by the surgical procedure.

Description : Which of the following actions is most appropriate for the nurse to take when the patient demonstrates subcutaneous emphysema along the suture line or chest dressing 2 hours after chest ... finding to the physician immediately. Subcutaneous emphysema results from air entering the tissue planes.

Last Answer : a) Record the observation. Subcutaneous emphysema occurs after chest surgery as the air that is located within the pleural cavity is expelled through the tissue opening created by the surgical procedure.

A persistent oroantral fistula for a 12 weeks period following the extraction of a maxillary first permanent molar is best treated by, a. Further review and reassurance since it will most probably heal spontaneously. b.Antibiotic therapy and nasal decongestants. c. Curettage and dressing of the defect. d. Excision of the fistula and surgical closure. e. Maxillary antral wash out and nasal antrostomy.

Description : A persistent oroantral fistula for a 12 weeks period following the extraction of a maxillary first permanent molar is best treated by, a. Further review and reassurance since it will most ... Excision of the fistula and surgical closure. e. Maxillary antral wash out and nasal antrostomy.

Last Answer : d. Excision of the fistula and surgical closure.

A persistent oroantral fistula for a 12 weeks period following the extraction of a maxillary first permanent molar is best treated by,** A. Further review and reassurance since it will most probably heal spontaneously B. Antibiotic therapy and nasal decongestants C. Curettage and dressing of the defect D. Excision of the fistula and surgical closure E. Maxillary antral wash out and nasal antrostomy.

Description : A persistent oroantral fistula for a 12 weeks period following the extraction of a maxillary first permanent molar is best treated by,** A. Further review and reassurance since it will most ... . Excision of the fistula and surgical closure E. Maxillary antral wash out and nasal antrostomy.

Last Answer : D. Excision of the fistula and surgical closure

Write the official standards of powder.

Description : Write the official standards of powder.

Last Answer : i. Coarse powder: A powder of which all particles pass through sieve no 10 with nominal aperture size 1.7mm and not more than 40% pass through sieve no 44 with nominal aperture size 355um.  ii. ... powder: A powder of which all particles pass through sieve no 120 with nominal aperture size 125 um.

Write special application of capsule.

Description : Write special application of capsule. 

Last Answer : Applications of capsule:  1. Enteric coated capsule: These capsules do not disintegrate in stomach (Acidic Medium) but break up in intestine (Alkaline medium). On commercial scale, a coating ... gelatine commonly used Capsule punctured by using sterile needle and then instilled into the eye.

Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Description : Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Last Answer : Economical. Available in variety of sizes and shapes.  Chemically inert, impermeable, strong and rigid. Does not deteriorate with age. Easy to label. Excellent barrier against light. ... easy to break. Heavy, Bulky to carry. Leaching and absorption of alkalis. Flak formation

Write the working of filter press with well labelled diagram.

Description : Write the working of filter press with well labelled diagram.

Last Answer : Working:  1. The slurry is pumped in under positive pressure up to 20 bar and fill each frame. 2. The filtrate passes through the cloths on opposite sides of the frame and runs down between the ... 6. Thickness of cake can be varied by using frame of different thickness. Diagram: 

Write the main objectives of mixing.

Description : Write the main objectives of mixing.

Last Answer : Objectives of mixing:  i. To form uniform mixture.  ii. To promote chemical reaction.  iii. Dispersion of solid particles in liquid.  iv. Dispersion of two immiscible liquids.

Write advantages and disadvantages of plastic as a material for container and state its type.

Description : Write advantages and disadvantages of plastic as a material for container and state its type.

Last Answer : Advantages: 1. Light in weight and can be handled easily. 2. Poor conductor of heat. 3. Sufficient mechanical strength. 4. Transported easily. 5. Unbreakable. 6. Available in various shapes ... (PVC) Low-density polyethylene (LDPE) Polypropylene (PP) Polystyrene (PS) Polyester (PES) etc.

Write reasons and remedies for “ Capping”

Description : Write reasons and remedies for “ Capping” 

Last Answer : Reasons:   Excessive fine. Defective punch and die. High speed of machine. Granules too dried. Remedies:  Setting the die and punch properly. Reduce % of fine. Punches ... Maintain the desire moisture in granules. Maintain the speed at optimum. Regulate the pressure of punches.

Define The term Clarification. Write the working of filter candle with neat diagram.

Description : Define The term Clarification. Write the working of filter candle with neat diagram.

Last Answer : Clarification:-  When solids are present in a very small proportion i.e. not exceeding 1.0 % the process of its separation from liquid, is called clarification. Working :-   1) These are ... the candle & gets collected inside the candle from where it is removed. Diagram :

Write short note on any one i. BCG Vaccine : ii. Silverson mixer homogenizer:

Description : Write short note on any one i. BCG Vaccine : ii. Silverson mixer homogenizer:

Last Answer : 1. BCG vaccine: It is freeze- dried preparation containing live culture of the bacillus Calmette and Guerin strain of Mycobacterium tuberculosis. Method of preparation : The bacilli are grown on a ... Use: Useful for the preparation of fine emulsion and suspension. Diagram:

Write the principle, construction, working and uses of the disintegrator.

Description : Write the principle, construction, working and uses of the disintegrator.

Last Answer : Principle: The Disintegrator works on the principle of impact.  Construction:  The Disintegrator consists of steel drum having a shaft in the centre. The shaft contains a disc, on which four beaters are ... Use:   This mill is used to powder all types of drugs including very hard drugs.

Define ‘Homogenisation’. Write the principle of homogenisation. Write in detail about ‘Colloidal Mill’.

Description : Define ‘Homogenisation’. Write the principle of homogenisation. Write in detail about ‘Colloidal Mill’.

Last Answer : Homogenization is the process of preparing fine emulsion from a coarse emulsion by converting the large globules in to small globules. Principle: These work on the principal of braking large ... thus reduced to fine particle size The material is thrown outward due to centrifugal action

Why plastic containers are more commonly used now a days? Write its demerits.

Description : Why plastic containers are more commonly used now a days? Write its demerits.

Last Answer : Plastic containers are more commonly used now a days for following advantages: 1.They are light in weight and can be handled easily 2.They are poor conductor of heat . 3.They have sufficient ... solution. 5.They are relatively expensive. 6.Special type of gum or adhesive required for labelling.

Write in brief about Mantous test.

Description : Write in brief about Mantous test.

Last Answer : A dose of 5 tuberculin units of old tuberculin or an equivalent dose of PPD is injected intradermally. After 48 to 72 hours the reaction of the test is observed at the site of the injection. ... than 5 mm is interpreted as a negative. The presence of erythema without induration is not significant.

Write the advantages & disadvantages of an evaporating pan

Description : Write the advantages & disadvantages of an evaporating pan

Last Answer : Advantages:   It is simple and cheap to construction.   Easy to clean and maintain.   Economical.  Disadvantages:   Poor coefficient of heat transfer.   Heating surface is ... concentration of thermolabile material.   Evaporating pan is open so vapour cause discomfort to the worker.

Write advantages and disadvantages of tablets.

Description : Write advantages and disadvantages of tablets.

Last Answer : Advantages of tablets: 1. Easy to administered. 2. Easy to dispense. 3. More stable. 4. Accuracy in dose. 5. Bitter and nauseous substance can be easily dispensed. 6. ... remove bitter and unpleasant taste. v) Swallowing is difficult especially for children and ill (unconscious) patients.

Write the applications of spray drier.

Description : Write the applications of spray drier.

Last Answer : Spray drier can be used for drying of: 1) Any substance in solution or suspension 2) Thermolabile substances, 3) Extracts, gelatin citric acid, 4) Soaps and detergents also can be dried using spray drier.

Write the importance of particle size reduction in pharmacy.

Description : Write the importance of particle size reduction in pharmacy.

Last Answer : Can be listed as follows: i) Increase the rate of solution. ii) Increase the rate of penetration of solvent. iii) It helps in uniform mixing of drugs. iv) It increases the rate of absorption. v) Smaller the particles slower the rate of sedimentation. Thus stable the suspension.

Define the term ‘Closures’. Write in detail about different types of closures commonly used in pharmaceutical industry.

Description : Define the term ‘Closures’. Write in detail about different types of closures commonly used in pharmaceutical industry.

Last Answer : CLOSURES are devices by means of which containers can be opened and closed. TYPES OF CLOSURES WITH EXAMPLES: 1. Plug type - It is a push-fit into the neck of the container. E.g. cork ... and paper impregnated with a suitable resin, wax or plastic. E.g. Caps of pharmaceutical liquid dosage forms.

Write the salient features of third edition of Indian Pharmacopoeia

Description : Write the salient features of third edition of Indian Pharmacopoeia

Last Answer : Salient Features III Edition 1985: i. New analytical techniques such as flame photometry, Flurometry, have been introduced as official method for certain chemical analysis. ii. Dissolution test has ... the new drug which came into use after the publication of first addendum to third edition.

Write importance of dosage form.

Description : Write importance of dosage form.

Last Answer : Transformation of drug into dosage forms is done for the following reasons: 1. To protect the drug substance from oxidation, hydrolysis and reduction. Eg. Coated tablets and sealed ampoules. ... . Many dosage forms can be easily identified from their distinct colour, shape or identifying markings.

What are different types of vaccines? Write method of preparation of small pox vaccine.

Description : What are different types of vaccines? Write method of preparation of small pox vaccine.

Last Answer : There are 4 main types of vaccines: Live-attenuated vaccines Inactivated vaccines Subunit, recombinant, polysaccharide, and conjugate vaccines Toxoid vaccines Small pox vaccine ... to produce homogenized suspension. ↓ Transfer to suitable sterile container and freeze dried

Write the advantages and disadvantages of fluidised bed dryer.

Description : Write the advantages and disadvantages of fluidised bed dryer. 

Last Answer : Advantages: i. It give high drying rate. ii. Suitable for thermolabile material. iii. Drying takes place of individual particles. iv. Temperature can be controlled. v. Prevent the ... : i. Turbulence produces cause attrition of particles. ii. Movement can generate electrical charges.