One of the responsibilities of the transport  layer protocol is to create a ______  communication.

1 Answer

Answer :

process to process

Related questions

Description : One of the responsibilities of the transport layer protocol is to create a ______ communication. A. host-to-host B. process-to-process C. node-to-node D. none of the above

Last Answer : B. process-to-process

Description : ____ is a process-to-process protocol that adds only port addresses, checksum error control, and length information to the data from the upper layer.

Last Answer : UDP

Description : Classification of protocol that interprets a frame of data as a group of successive bit combined into predetermined pattern of fixed length, usually 8 bits each.

Last Answer : Character and Byte-oriented protocols

Description : ____ is a dynamic mapping protocol in which a physical address is found for a given logical address

Last Answer : ARP

Description : _________ is the protocol suite for the Internet.

Last Answer : TCP/IP

Description : _______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T.

Last Answer : ATM

Description : Which of the following is NOT true about User Datagram Protocol in transport layer? a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way ... File System d. The lack of retransmission delays makes it suitable for real-time applications

Last Answer : b. It does three way handshake before sending datagrams

Description : A ________ is a set of rules that governs data communication

Last Answer : protocol

Description : In communication systems the frequency range used for voice is:

Last Answer : 300 Hz to 3800 Hz

Description : They proposed a new communication medium using cladded fiber cables.

Last Answer : Kao and Bockham

Description : ______ are special-interest groups that quickly test, evaluate, and standardize new technologies

Last Answer : Forums

Description : A class A FM station is limited in antenna height of ______ feet above average terrain.

Last Answer : 2000

Description : The vertical field-scanning frequency is ______ Hz

Last Answer : 60

Description : The service are in standard AM broadcast is described as ______ if there is no fading of signal.

Last Answer : Primary

Description : The service are in standard AM broadcast is described as ______ if there is no fading of signal.

Last Answer : Primary

Description : The final power amplifier in an FM transmitter usually operates class ______.

Last Answer : C

Description : The time it takes to transmit one TDM frame is called ______

Last Answer : Frame time

Description : In a ______ handoff, a mobile station can communicate with two base stations at the same time

Last Answer : . soft

Description : In a ______ handoff, a mobile station only communicates with one base station

Last Answer : hard

Description : The OSI layer that provides the control functions necessary to establish, manage and terminated the connections as required to satisfy the user reques

Last Answer : Session layer

Description : A _______ is a three-layer device that handles packets based on their logical addresses

Last Answer : router

Description : A repeater is a connecting device that operates in the _______ layer of the Internet model.

Last Answer : physical

Description : ________ is actually a multiport repeater. It is normally used to create connections between stations in a physical star topology

Last Answer : An active hub

Description : ____ is a data-centric middleware standard for device-to-device and machine-to-machine communication. A. Data Distribution Serviced (DDS) B. Advance Message Queuing Protocol (AMQP) C. Extensible Messaging and Presence Protocol (XMPP) D. Message Queue Telemetry Transport (MQTT)

Last Answer : A. Data Distribution Serviced (DDS) 

Description : ICMP is a _________ layer protocol. A) datalink B) transport C) network D) noneof the above

Last Answer : network

Description : Which of the following is not the layer of TCP/IP protocol? a. Application Layer b. Session Layer c. Transport Layer d. Internetwork layer

Last Answer : b. Session Layer

Description : Which of the following protocols is an application layer protocol that establishes, manages and terminates multimedia sessions ? a. Session Maintenance Protocol b. Real - time Streaming Protocol c. Real - time Transport Control Protocol d. Session Initiation Protocol

Last Answer : d. Session Initiation Protocol

Description : A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP traffic c. stop ... address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Last Answer : d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Description : Which of the following is a transport layer protocol? a. stream control transmission protocol b. internet control message protocol c. neighbor discovery protocol d. dynamic host configuration protocol

Last Answer : a. stream control transmission protocol

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Last Answer : a. all UDP packets are treated independently by transport layer

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received ... order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Last Answer : a. all UDP packets are treated independently by transport layer

Description : Which protocol does HTTP (Hyper Text Transfer Protocol) - use for transferring web pages at the Transport layer a. IP b. UDP c. TCP d. ARP

Last Answer : c. TCP

Description : SMTP is a protocol used in which layer? a. Application b. Network c. Physical d. Transport

Last Answer : a. Application

Description : State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and ... , 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : D. 1.false, 2. true, 3. true

Description : Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Last Answer : A. receive sliding window.

Description : The protocol data unit PDU for the Transport layer in the Internet stack is A. Segment B. Datagram C. Message/Data D. Frame

Last Answer : A. Segment

Description : Which of the following is a transport layer protocol? A. stream control transmission protocol B. internet control message protocol C. neighbor discovery protocol D. dynamic host configuration protocol

Last Answer : A. stream control transmission protocol

Description : User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Last Answer : A. all UDP packets are treated independently by transport layer

Description : HTTP is ________ protocol. a) application layer b) transport layer c) network layer d) data link layer

Last Answer : a) application layer

Description : User datagram protocol is called connectionless because _____________ a) all UDP packets are treated independently by transport layer b) it sends data as a stream of related packets c) it is received in the same order as sent order d) it sends data very quickly

Last Answer : all UDP packets are treated independently by transport layer

Description : Which of the following is not the layer of TCP/IP protocol? A) Application Layer B) Session Layer C) Transport Layer D) Internetwork layer

Last Answer : B) Session Layer

Description : Which of the following is not the layer of TCP/IP protocol? A) Application Layer B) Session Layer C) Transport Layer D) Internetwork layer

Last Answer : B) Session Layer

Description : The ___ protocols define how the applications interface with the lower layer protocol to send the data over the network. A. Application layer B. Transport layer C. Network layer D. Link layer

Last Answer : A. Application layer 

Description : Which of the following protocols is an application layer protocol that establishes, manages and terminates multimedia sessions? (A) Session Maintenance Protocol (B) Real - time Streaming Protocol (C) Real - time Transport Control Protocol (D) Session Initiation Protocol

Last Answer : (D) Session Initiation Protocol

Description : The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___

Last Answer : is horizontal

Description : It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power

Last Answer : directive gain

Description : The property of interchangeability for the transmitting and receiving operations is known as ____

Last Answer : reciprocity

Description : The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space

Last Answer : radiation field

Description : It is the ratio of the radiated to the reflected energy:

Last Answer : Radiation efficiency

Description : It is the resistance that, if it replaced the antenna, would dissipate exactly the same amount of power that the antenna radiates

Last Answer : . Radiation resistance