To ensure the accuracy of a transmission, what is the minimum number of times a modulating wave should be sampled in pulse modulation?

To ensure the accuracy of a transmission, what is the  minimum number of times a modulating wave should be sampled in pulse modulation?
by

1 Answer

Answer :

2.5 times the highest modulating frequency.
by

Related questions

If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Description : If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Last Answer : 28. 50.

A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Description : A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Last Answer : PWM, PLM, PDM

With a single modulating tone, what is the amplitude of the sideband frequencies at 100-percent modulation?

Description : With a single modulating tone, what is the amplitude of the sideband frequencies at 100-percent modulation?

Last Answer : One-half the amplitude of the carrier.

What is the primary advantage of pulse-modulation systems?

Description : What is the primary advantage of pulse-modulation systems?

Last Answer : . Low susceptibility to noise.

Pulse-code modulation requires the use of approximations of value that are obtained by what process?

Description : Pulse-code modulation requires the use of approximations of value that are obtained by what process?

Last Answer : Quantization.

What is pulse-frequency modulation?

Description : What is pulse-frequency modulation?

Last Answer : A method of pulse modulation in which a modulating wave is used to frequency modulate a pulse-generating circuit

What is the main disadvantage of pulse-position modulation?

Description : What is the main disadvantage of pulse-position modulation?

Last Answer : It requires synchronization between the transmitter and receiver.

Which edges of the pulse can be modulated in pulse duration modulation?

Description : Which edges of the pulse can be modulated in pulse duration modulation?

Last Answer : Either, or both at the same time.

What characteristics of a pulse can be changed in pulse time modulation?

Description : What characteristics of a pulse can be changed in pulse time modulation?

Last Answer : The time duration of the pulses or the time of occurrence of the pulses.

What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Description : What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Last Answer : Both are susceptible to noise and interference

What action is necessary to impress intelligence on the pulse train in pulse modulation?

Description : What action is necessary to impress intelligence on the pulse train in pulse modulation?

Last Answer : Some characteristic of the pulses has to be varied.

What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.

What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the average audio modulating frequency C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency

Description : What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the ... audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency

Last Answer : C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency

The third symbol in the designation of radio emission under the ITU rules refers to A. Type of the modulation of the main carrier B. Bandwidth C. Nature of the signals modulating the main carrier D. Type of information to be transmitted

Description : The third symbol in the designation of radio emission under the ITU rules refers to A. Type of the modulation of the main carrier B. Bandwidth C. Nature of the signals modulating the main carrier D. Type of information to be transmitted

Last Answer : D. Type of information to be transmitted

The first symbol in the designation of radio emission under the ITU rules to A. Nature of signals modulating the main carrier B. Type of information to be transmitted C. Bandwidth D. Type of modulation of the main carrier

Description : The first symbol in the designation of radio emission under the ITU rules to A. Nature of signals modulating the main carrier B. Type of information to be transmitted C. Bandwidth D. Type of modulation of the main carrier

Last Answer : D. Type of modulation of the main carrier

If the percentage modulation of an AM amplifier is 88% and the modulating signal is 1 volt, the carrier has an amplitude of _______________. A. 1.14 volts B. 0.88 volt C. 1.88 volts D. 0.12 volt

Description : If the percentage modulation of an AM amplifier is 88% and the modulating signal is 1 volt, the carrier has an amplitude of _______________. A. 1.14 volts B. 0.88 volt C. 1.88 volts D. 0.12 volt

Last Answer : A. 1.14 volts

Compare narrow band FM with wide-band FM w.r.t. following points. (i) Modulation index (ii) Maximum deviation (iii)Range of modulating frequency (iv)Application

Description : Compare narrow band FM with wide-band FM w.r.t. following points. (i) Modulation index (ii) Maximum deviation (iii)Range of modulating frequency (iv)Application

Last Answer : Sr. No Parameters Narrow band FM Wide band FM 1 Modulation index Less than or slightly greater than 1 Greater than 1  2 Maximum deviation ... like police wireless, ambulance etc. Entertainment broadcasting can be used for high quality music transmission 

The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: -

Description : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: -  a) 2 b) 5 c) 3 d) 4

Last Answer : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: - 5

What type of modulation depends on the carrier-wave phase shift?

Description : What type of modulation depends on the carrier-wave phase shift?

Last Answer : Phase.

What characteristic of a carrier wave is varied in frequency modulation?

Description : What characteristic of a carrier wave is varied in frequency modulation?

Last Answer : Instantaneous frequency.

What happens to an fm signal as you increase the frequency of the modulating signal?

Description : What happens to an fm signal as you increase the frequency of the modulating signal?

Last Answer : Both the bandwidth and the number of significant sidebands increase.

What does the simplest diode detector use to reproduce the modulating frequency?

Description : What does the simplest diode detector use to reproduce the modulating frequency?

Last Answer : The modulation envelope.

. What is the function of the modulating circuit?

Description : . What is the function of the modulating circuit?

Last Answer : To produce an af (or video) signal that can be superimposed on the rf signal produced by the oscillator.

i) State the significance of modulation index in AM transmission. ii) Explain the effect of modulation index on AM wave with waveforms.

Description : i) State the significance of modulation index in AM transmission. ii) Explain the effect of modulation index on AM wave with waveforms.

Last Answer : Significance of modulation index in AM transmission  It is used to determine the strength and quality of transmitted signal. If the modulation index is small, then the amount of variation in ... amplitude part of its information is lost in the process of modulation which is undesirable.

What minimum/maximum voltage level can be attained in the pulse generator section by adjusting the LEVEL control?

Description : What minimum/maximum voltage level can be attained in the pulse generator section by adjusting the LEVEL control?

Last Answer : 0 to 5 volts.

What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Description : What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave

Last Answer : D. A frequency modulated continuous wave

In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : PM

In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as the amplitudeof the information signal changes, thefrequency of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Last Answer : FM

In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : AM

The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Description : The analog signal needs to be sampled at a minimum sampling rate of: (A) 2fs (B) 1/(2fs) (C) fs/2 (D) 2/fs

Last Answer : (A) 2fs

It is the ratio of the transmission bit rate to the minimum bandwidth required for a particular modulation scheme

Description : It is the ratio of the transmission bit rate to the minimum bandwidth required for a particular modulation scheme

Last Answer : Bandwidth efficiency, Information density, or Spectral efficiency

Which of the following antennas is used for testing and adjusting a transmitter for proper modulation, amplifier operation and frequency accuracy? A. Elementary B. Real C. Isotropic D. Dummy

Description : Which of the following antennas is used for testing and adjusting a transmitter for proper modulation, amplifier operation and frequency accuracy? A. Elementary B. Real C. Isotropic D. Dummy

Last Answer : D. Dummy

ECE Board Exam March 1996 One type of pulse communications system uses pulse that appear as a group, and which vary in number according to the loudness of the voice. This type of pulse modulation is called A. pulse duration modulation B. pulse amplitude modulation C. pulse code modulation D. pulse position modulation

Description : ECE Board Exam March 1996 One type of pulse communications system uses pulse that appear as a group, and which vary in number according to the loudness of the voice. This type of ... A. pulse duration modulation B. pulse amplitude modulation C. pulse code modulation D. pulse position modulation

Last Answer : A. pulse duration modulation

What Blank Integrity refers to a set of Access rules that govern data entry and helps to ensure data accuracy?

Description : What Blank Integrity refers to a set of Access rules that govern data entry and helps to ensure data accuracy?

Last Answer : Data integrity.

Which of the following is considered a primary reason for creating an internal audit department? a. To safeguard resources entrusted to the organization. b. To evaluate and improve the effectiveness of control processes. c. To ensure the accuracy, reliability, and timeliness of financial and operating data used in management's decision making. d. To relieve management of the responsibility for establishing effective controls

Description : Which of the following is considered a primary reason for creating an internal audit department? a. To safeguard resources entrusted to the organization. b. To evaluate and improve the ... 's decision making. d. To relieve management of the responsibility for establishing effective controls

Last Answer : To evaluate and improve the effectiveness of control processes.

What is pulse-width modulation (PWM) in Arduino?

Description : What is pulse-width modulation (PWM) in Arduino?

Last Answer : Pulse-width modulation (PWM) in Arduino is a technique used to control the brightness of an LED or the speed of a motor by varying the duty cycle of a digital signal.

What is a pulse-width modulation (PWM) signal in Arduino?

Description : What is a pulse-width modulation (PWM) signal in Arduino?

Last Answer : A PWM signal in Arduino is a digital signal that varies the width of the pulse to simulate an analog signal.

A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Last Answer : Answer : A

Type of modulation used in TV broadcast visual transmitter. A. Pulse modulation B. DSBFC C. Vestigial sideband D. SSBFC

Description : Type of modulation used in TV broadcast visual transmitter. A. Pulse modulation B. DSBFC C. Vestigial sideband D. SSBFC

Last Answer : C. Vestigial sideband

Which of the following systems is not used in radio detection and ranging? A. Frequency shift B. Frequency modulation C. Pulse radar D. Amplitude modulation

Description : Which of the following systems is not used in radio detection and ranging? A. Frequency shift B. Frequency modulation C. Pulse radar D. Amplitude modulation

Last Answer : D. Amplitude modulation

Modulation in which no signal is present between pulses A. Pulse modulation B. QAM C. PSK D. FSK

Description : Modulation in which no signal is present between pulses A. Pulse modulation B. QAM C. PSK D. FSK

Last Answer : A. Pulse modulation

ECE Board Exam March 1996 Which of the following pulse modulation systems is analog? A. Delta B. Differential PCM C. PWM D. PCM

Description : ECE Board Exam March 1996 Which of the following pulse modulation systems is analog? A. Delta B. Differential PCM C. PWM D. PCM

Last Answer : C. PWM

ECE Board Exam March 1996 The modulation system used for telegraphy is A. frequency-shift keying B. two-tone modulation C. pulse-code modulation D. single-tone modulation

Description : ECE Board Exam March 1996 The modulation system used for telegraphy is A. frequency-shift keying B. two-tone modulation C. pulse-code modulation D. single-tone modulation

Last Answer : A. frequency-shift keying

What is Pulse Width Modulation?

Description : What is Pulse Width Modulation?

Last Answer : Ans-Pulse width modulation is a modulation technique in which the width of the pulse is varied in accordance with the message signal. Pulse width Modulation is abbreviated as PWM. PWM can be used ... the pulse train and recover an average analog waveform. PWM is used in sound synthesis circuits.

Pulse width modulation may be generated:

Description : Pulse width modulation may be generated:

Last Answer : with a monostable multivibrator

Pulse – amplitude modulation signals are multiplexed by using

Description : Pulse – amplitude modulation signals are multiplexed by using

Last Answer : FET switches

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

Define pulse modulation. State its types.

Description : Define pulse modulation. State its types. 

Last Answer : Pulse Modulation - consists essentially of sampling analog information signals and then converting those samples into discrete pulses. OR It consists essentially of sampling analog information signals and then converting those ... PAM - PWM - PPM  ii) Digital Pulse Modulation - PCM - DM - ADM