What does the simplest diode detector use to reproduce the modulating frequency?

What does the simplest diode detector use to reproduce  the modulating frequency?
by

1 Answer

Answer :

The modulation envelope.
by

Related questions

What happens to an fm signal as you increase the frequency of the modulating signal?

Description : What happens to an fm signal as you increase the frequency of the modulating signal?

Last Answer : Both the bandwidth and the number of significant sidebands increase.

which components act as the filter network in the diode detector?

Description : which components act as the filter network in the diode detector?

Last Answer : C1 and R1.

How does the current-diode detector differ from the voltage-diode detector?

Description : How does the current-diode detector differ from the voltage-diode detector?

Last Answer : The current-diode detector is in parallel with the input and load.

What is the function of the diode in a series-diode detector?

Description : What is the function of the diode in a series-diode detector?

Last Answer : Rectifies the rf pulses in the received signal.

In its simplest form, what functions must a radar detector be capable of performing?

Description : In its simplest form, what functions must a radar detector be capable of performing?

Last Answer : Detecting the presence of rf energy.

What is the simplest form of fm detector?

Description : What is the simplest form of fm detector?

Last Answer : Slope detector.

What is the name of the simplest type of rectifier which uses one diode?

Description : What is the name of the simplest type of rectifier which uses one diode?

Last Answer : The half-wave rectifier.

What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Description : What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Last Answer : a. Size of the headgap. b. Speed of the magnetic tape.

. What is the function of the modulating circuit?

Description : . What is the function of the modulating circuit?

Last Answer : To produce an af (or video) signal that can be superimposed on the rf signal produced by the oscillator.

If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Description : If a modulating wave is sampled 10 times per cycle with a 5-element binary code, how many bits of information are required to transmit the signal?

Last Answer : 28. 50.

To ensure the accuracy of a transmission, what is the minimum number of times a modulating wave should be sampled in pulse modulation?

Description : To ensure the accuracy of a transmission, what is the minimum number of times a modulating wave should be sampled in pulse modulation?

Last Answer : 2.5 times the highest modulating frequency.

With a single modulating tone, what is the amplitude of the sideband frequencies at 100-percent modulation?

Description : With a single modulating tone, what is the amplitude of the sideband frequencies at 100-percent modulation?

Last Answer : One-half the amplitude of the carrier.

What limits the usefulness of high-gain, tunnel-diode frequency converters?

Description : What limits the usefulness of high-gain, tunnel-diode frequency converters?

Last Answer : Stability problems.

What determines the frequency of a tunnel-diode oscillator?

Description : What determines the frequency of a tunnel-diode oscillator?

Last Answer : The tuned circuit or cavity frequency.

Transformers are used onboard ships with AC generators to _____________. A. change frequency B. increase power output to modulating frequency controllers C. decrease power output to modulating frequency controllers D. permit higher voltage for electric motor operation and low voltage for lighting circuits

Description : Transformers are used onboard ships with AC generators to _____________. A. change frequency B. increase power output to modulating frequency controllers C. decrease power output to modulating frequency ... D. permit higher voltage for electric motor operation and low voltage for lighting circuits

Last Answer : Answer: D

Deemphasis in the receiver in effect attenuates modulating signal components and noise in what frequency range? A. dc B. low C. intermediate D. high

Description : Deemphasis in the receiver in effect attenuates modulating signal components and noise in what frequency range? A. dc B. low C. intermediate D. high

Last Answer : D. high

What is the approximate bandwidth of an FM system with 10 kHz of modulating frequency and a 150 kHz of frequency deviation? A. 300 kHz B. 320 kHz C. 150 kHz D. 200 kHz

Description : What is the approximate bandwidth of an FM system with 10 kHz of modulating frequency and a 150 kHz of frequency deviation? A. 300 kHz B. 320 kHz C. 150 kHz D. 200 kHz

Last Answer : B. 320 kHz

What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Description : What is meant by the term modulation index? A. The processor index. B. The ratio between the deviation of a frequency modulated signal and the modulating frequency. C. The FM signal-to-noise ratio. D. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

Last Answer : B. The ratio between the deviation of a frequency modulated signal and the modulating frequency.

What is meant by the term deviation ratio? A. The ratio of the audio modulating frequency to the center carrier frequency. B. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency. C. The ratio of the carrier center frequency to the audio modulating frequency. D. The ratio of the highest audio modulating frequency to the average audio modulating frequency.

Description : What is meant by the term deviation ratio? A. The ratio of the audio modulating frequency to the center carrier frequency. B. The ratio of the maximum carrier frequency deviation to the highest ... . D. The ratio of the highest audio modulating frequency to the average audio modulating frequency.

Last Answer : B. The ratio of the maximum carrier frequency deviation to the highest audio modulating frequency.

What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the average audio modulating frequency C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency

Description : What is meant by the term deviation ratio? A. The ratio of the carrier center frequency to the audio modulating frequency B. The ratio of the highest audio modulating frequency to the ... audio modulation frequency D. The ratio of the audio modulating frequency to the center carrier frequency

Last Answer : C. The ratio of the maximum carrier frequency deviation to the highest audio modulation frequency

In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as the amplitudeof the information signal changes, thefrequency of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Last Answer : FM

In a FM system, the maximum deviation is 75KHz. Find bandwidth for modulating frequency i. fm=500Hz ii. fm=5KHz iii. fm=10KHz Draw conclusion for bandwidth of FM from answer.

Description : In a FM system, the maximum deviation is 75KHz. Find bandwidth for modulating frequency i. fm=500Hz ii. fm=5KHz iii. fm=10KHz Draw conclusion for bandwidth of FM from answer.

Last Answer : Given deviation∆=75kHz i) fm=500Hz bandwidth B.W=2(∆+fm)  =2(75k+500)=151kHz  ii). fm=5KHz bandwidth B.W=2(∆+fm)  =2(75k+5k)=160KHz iii) fm=10KHz bandwidth B.W=2(∆+fm)  =2(75k+10k)=170KHz As the modulating frequency increases bandwidth also increases.

Compare narrow band FM with wide-band FM w.r.t. following points. (i) Modulation index (ii) Maximum deviation (iii)Range of modulating frequency (iv)Application

Description : Compare narrow band FM with wide-band FM w.r.t. following points. (i) Modulation index (ii) Maximum deviation (iii)Range of modulating frequency (iv)Application

Last Answer : Sr. No Parameters Narrow band FM Wide band FM 1 Modulation index Less than or slightly greater than 1 Greater than 1  2 Maximum deviation ... like police wireless, ambulance etc. Entertainment broadcasting can be used for high quality music transmission 

The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: -

Description : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: -  a) 2 b) 5 c) 3 d) 4

Last Answer : The modulation index of a FM Signal having modulating frequency 2 KHz and Max deviation is 10 KHz, is: - 5

The most common device used as a light detector in fiber optic communications system. A. LED B. Darlington phototransistor C. APDs D. PIN diode

Description : The most common device used as a light detector in fiber optic communications system. A. LED B. Darlington phototransistor C. APDs D. PIN diode

Last Answer : C. APDs

A ____________________ diode is the usual light detector for single-mode

Description : A ____________________ diode is the usual light detector for single-mode

Last Answer : PIN

The term responsivity as it applies to a light detector is best described as ∙ A. the time required for the signal to go from 10 to 90 percent of maximum amplitude ∙ B. the ratio of the diode output current to the input optical power ∙ C. the ratio of the input power to output power ∙ D. the ratio of output current to input current

Description : The term responsivity as it applies to a light detector is best described as ∙ A. the time required for the signal to go from 10 to 90 percent of maximum amplitude ∙ B. the ratio of the diode ... . the ratio of the input power to output power ∙ D. the ratio of output current to input current

Last Answer : the ratio of the diode output current to the input optical power

Which of the following is NOT a common light detector ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Photodiode ∙ d. Avalanche photodiode

Description : Which of the following is NOT a common light detector ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Photodiode ∙ d. Avalanche photodiode

Last Answer : ∙ b. Photovoltaic diode

Draw the circuit diagram of practical diode detector and explain its working.

Description : Draw the circuit diagram of practical diode detector and explain its working. 

Last Answer : Circuit diagram of practical diode detector:  Explanation- The circuit operates in the following manner- The diode has been reversed so that now the negative envelope is demodulated. Due to this ... to produce AGC voltage. The DC AGC voltage is proportional to the amplitude of AM signal. 

Explain the demodulation of AM signal using diode detector.

Description : Explain the demodulation of AM signal using diode detector.

Last Answer : Simple diode detector:- Explanation:- This is essentially just a half wave rectifier which charges a capacitor to a voltage nearly to the peak voltage of the incoming AM waveform s(t). ... detector output is proportional to the signal strength. Stronger Am signal higher is the dc AGC voltage.

Draw the practical AM diode detector circuit. Sketch its input and output waveforms.

Description : Draw the practical AM diode detector circuit. Sketch its input and output waveforms. 

Last Answer : Practical AM diode detector 1. Skip distance:-Skip distance is defined as the shortest distance from a transmitter, measured along the surface of earth at which a sky wave of fixed frequency ... had taken place from a surface located at a greater height, called Virtual height of this layer.

The vertical-deflection plates are used to reproduce what function?

Description : The vertical-deflection plates are used to reproduce what function?

Last Answer : Amplitude.

The vertical-deflection plates are used to reproduce what function?

Description : The vertical-deflection plates are used to reproduce what function?

Last Answer : Amplitude.

How should a tape recorder with good phase response reproduce a complex waveform, such as a square wave?

Description : How should a tape recorder with good phase response reproduce a complex waveform, such as a square wave?

Last Answer : With no distortion

Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Description : Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Last Answer : 35-dB RMS because the highest SNR can always record and reproduce the widest range of input signals.

What is the major difference between direct reproduce electronics and FM reproduce electronics?

Description : What is the major difference between direct reproduce electronics and FM reproduce electronics?

Last Answer : FM record electronics must use a limiter and demodulator circuit (figure 5-5) to demodulate the signal intelligence from the carrier frequency.

The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Description : The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Last Answer : It generates an equalization signal which corrects any frequency response problems in the input signal from the pre-amplifier circuit.

What two types of record and reproduce electronics are used by magnetic tape recorders?

Description : What two types of record and reproduce electronics are used by magnetic tape recorders?

Last Answer : . a. Direct record (AM). b. Frequency modulation (FM).

A recorder's erase head is always placed in what sequence on the record/reproduce track?

Description : A recorder's erase head is always placed in what sequence on the record/reproduce track?

Last Answer : . First, before the record and reproduce heads.

Why are record heads always placed before reproduce heads on recorders?

Description : Why are record heads always placed before reproduce heads on recorders?

Last Answer : Allow you to monitor the signals you're recording.

Most record and reproduce heads are in one of what three bandwidth categories?

Description : Most record and reproduce heads are in one of what three bandwidth categories?

Last Answer : a. Narrowband—100 Hz to 100 kHz. b. Intermediate band—100 Hz to 500 kHz. c. Wideband—400 Hz to 2 mHz.

Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Description : Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Last Answer : An amplifier.

In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Description : In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Last Answer : (a) Phase. (b) Amplitude.

An error signal is the difference between what two quantities fed to the CT (error detector)?

Description : An error signal is the difference between what two quantities fed to the CT (error detector)?

Last Answer : Input signal and feedback.

Why is detector saturation not generally a problem in fiber optic communications systems?

Description : Why is detector saturation not generally a problem in fiber optic communications systems?

Last Answer : Because fiber optic communications systems operate at low optical power levels.

What are the four most common materials used in semiconductor detector fabrication?

Description : What are the four most common materials used in semiconductor detector fabrication?

Last Answer : Silicon, gallium arsenide, germanium, and indium phosphide.

For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Description : For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Last Answer : High.

Describe the operation of an optical detector

Description : Describe the operation of an optical detector

Last Answer : It is a transducer that converts an optical signal into an electrical signal. It does this by generating an electrical current proportional to the intensity of incident optical radiation.

What is the function of the detector?

Description : What is the function of the detector?

Last Answer : To extract the modulating audio signal.

How can a peak detector for pam be modified to detect pdm?

Description : How can a peak detector for pam be modified to detect pdm?

Last Answer : By making the time constant for charging the capacitor at least 10 times the maximum received pulse width.