What is the primary advantage of pulse-modulation  systems?

1 Answer

Answer :

. Low susceptibility to noise.

Related questions

Description : What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?

Last Answer : Both are susceptible to noise and interference

Description : Pulse-code modulation requires the use of approximations of value that are obtained by what process?

Last Answer : Quantization.

Description : What is pulse-frequency modulation?

Last Answer : A method of pulse modulation in which a modulating wave is used to frequency modulate a pulse-generating circuit

Description : What is the main disadvantage of pulse-position modulation?

Last Answer : It requires synchronization between the transmitter and receiver.

Description : Which edges of the pulse can be modulated in pulse duration modulation?

Last Answer : Either, or both at the same time.

Description : What characteristics of a pulse can be changed in pulse time modulation?

Last Answer : The time duration of the pulses or the time of occurrence of the pulses.

Description : To ensure the accuracy of a transmission, what is the minimum number of times a modulating wave should be sampled in pulse modulation?

Last Answer : 2.5 times the highest modulating frequency.

Description : What action is necessary to impress intelligence on the pulse train in pulse modulation?

Last Answer : Some characteristic of the pulses has to be varied.

Description : Which of the following systems is not used in radio detection and ranging? A. Frequency shift B. Frequency modulation C. Pulse radar D. Amplitude modulation

Last Answer : D. Amplitude modulation

Description : ECE Board Exam March 1996 Which of the following pulse modulation systems is analog? A. Delta B. Differential PCM C. PWM D. PCM

Last Answer : C. PWM

Description : What type of modulation do most analog fiber optic communications systems use?

Last Answer : Intensity modulation.

Description : What is pulse-width modulation (PWM) in Arduino?

Last Answer : Pulse-width modulation (PWM) in Arduino is a technique used to control the brightness of an LED or the speed of a motor by varying the duty cycle of a digital signal.

Description : What is a pulse-width modulation (PWM) signal in Arduino?

Last Answer : A PWM signal in Arduino is a digital signal that varies the width of the pulse to simulate an analog signal.

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as A) Pulse code modulation B) Pulse stretcher C) Query processing D) Queue management

Last Answer : Answer : A

Description : Type of modulation used in TV broadcast visual transmitter. A. Pulse modulation B. DSBFC C. Vestigial sideband D. SSBFC

Last Answer : C. Vestigial sideband

Description : Modulation in which no signal is present between pulses A. Pulse modulation B. QAM C. PSK D. FSK

Last Answer : A. Pulse modulation

Description : ECE Board Exam March 1996 One type of pulse communications system uses pulse that appear as a group, and which vary in number according to the loudness of the voice. This type of ... A. pulse duration modulation B. pulse amplitude modulation C. pulse code modulation D. pulse position modulation

Last Answer : A. pulse duration modulation

Description : ECE Board Exam March 1996 The modulation system used for telegraphy is A. frequency-shift keying B. two-tone modulation C. pulse-code modulation D. single-tone modulation

Last Answer : A. frequency-shift keying

Description : What is Pulse Width Modulation?

Last Answer : Ans-Pulse width modulation is a modulation technique in which the width of the pulse is varied in accordance with the message signal. Pulse width Modulation is abbreviated as PWM. PWM can be used ... the pulse train and recover an average analog waveform. PWM is used in sound synthesis circuits.

Description : Pulse width modulation may be generated:

Last Answer : with a monostable multivibrator

Description : A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Last Answer : PWM, PLM, PDM

Description : Pulse – amplitude modulation signals are multiplexed by using

Last Answer : FET switches

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

Description : A technique used by codes to convert an analog signal into a digital bit stream is known as a. Pulse code modulation b. Pulse stretcher c. Query processing d. Queue management

Last Answer : a. Pulse code modulation

Description : Define pulse modulation. State its types. 

Last Answer : Pulse Modulation - consists essentially of sampling analog information signals and then converting those samples into discrete pulses. OR It consists essentially of sampling analog information signals and then converting those ... PAM - PWM - PPM  ii) Digital Pulse Modulation - PCM - DM - ADM 

Description : Indicate which of the following pulse modulation is analog  a) PCM b) DPCM c) PWM d) Delta

Last Answer : Indicate which of the following pulse modulation is analog  a) PCM b) DPCM c) PWM d) Delta

Description : In single pulse modulation of PWM inverters, third harmonic can be eliminated if pulse width is equal to   (a) 30o (b) 60o (c) 120o (d) 150o

Last Answer : In single pulse modulation of PWM inverters, third harmonic can be eliminated if pulse width is equal to 120o

Last Answer : PWM means the width of pulse signal can be varied by varying ton & tOFF.

Description : What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Last Answer : Frequency stability.

Description : What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Last Answer : Frequency stability.

Description : What is the primary advantage of the shielded pair?

Last Answer : The conductors are balanced to ground.

Description : What is the primary advantage of bulk-effect devices over normal pn-junction semiconductors?

Last Answer : Larger microwave power outputs.

Description : What is the primary advantage of hybrid circuits?

Last Answer : Circuit flexibility

Description : What is the primary advantage of a ratio detector?

Last Answer : Suppresses amplitude noise without limiter stages.

Description : What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Last Answer : The electrodynamometer-type meter can be used to measure both ac and dc currents.

Description : What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Last Answer : The electrodynamometer-type meter can be used to measure both ac and dc currents.

Description : What is the primary advantage of using a current probe?

Last Answer : Current probes enable you to perform current measurements without disconnecting wires. Current probes are clamped around the insulated wire.

Description : . What is the primary advantage of an fsk transmission system?

Last Answer : Resistance to noise interference.

Description : Which cavity of a three-cavity klystron causes most of the velocity modulation?

Last Answer : The middle cavity.

Description : What can be added to the basic two-cavity klystron to increase the amount of velocity modulation and the power output?

Last Answer : Intermediate cavities between the input and output cavities.

Description : What types of modulation are shipboard receive-only equipment designed to receive?

Last Answer : Fm or psk.

Description : Define modulation.

Last Answer : The process of varying one or more characteristics of an optical signal to encode and convey information.

Description : Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Last Answer : Emitter-base junction

Description : Phase-shift keying is similar to what other two types of modulation?

Last Answer : Cw and frequency-shift keying.

Description : What type of modulation depends on the carrier-wave phase shift?

Last Answer : Phase.

Description : How is the degree of modulation expressed in an fm system?

Last Answer : As the ratio of the frequency deviation to the maximum frequency deviation allowable.

Description : What characteristic of a carrier wave is varied in frequency modulation?

Last Answer : Instantaneous frequency.

Description : Name the modulation system in which the frequency alternates between two discrete values in response to the opening and closing of a key?

Last Answer : . Frequency-shift keying.

Description : What are the two types of angle modulation?

Last Answer : Frequency and phase.