Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Which junction of the transistor in the common-emitter  detector detects the modulation envelope?
by

1 Answer

Answer :

Emitter-base junction
by

Related questions

How is the output signal developed in the common-emitter detector?

Description : How is the output signal developed in the common-emitter detector?

Last Answer : By the collector current flow through R4.

Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. C. Shift the 'Q' point to increase collector current. D. Increase the potential difference between the emitter and the base.

Description : Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. ... point to increase collector current. D. Increase the potential difference between the emitter and the base.

Last Answer : Answer: B

Which junction acts as the detector in a common-base detector?

Description : Which junction acts as the detector in a common-base detector?

Last Answer : Emitter-base junction.

What three functions does the transistor in a regenerative detector serve?

Description : What three functions does the transistor in a regenerative detector serve?

Last Answer : Oscillator, mixer, and detector.

What simple, one-transistor detector circuit uses the heterodyne principle?

Description : What simple, one-transistor detector circuit uses the heterodyne principle?

Last Answer : Regenerative detector.

Indian Railways detects the rail flow by A. Mitsubish Rail flow dector B. Soni Rail flow dector C. Audi-gauge Rail flow detector D. Kraut Kramer Rail flow detector.

Description : Indian Railways detects the rail flow by A. Mitsubish Rail flow dector B. Soni Rail flow dector C. Audi-gauge Rail flow detector D. Kraut Kramer Rail flow detector.

Last Answer : D [Kraut Kramer Rail flow detector.]

What is a device that detects both vertically and horizontally polarized signals simultaneously? A. Orthomode transducer B. Crystal detector C. Optoisolator D. Isomode detector

Description : What is a device that detects both vertically and horizontally polarized signals simultaneously? A. Orthomode transducer B. Crystal detector C. Optoisolator D. Isomode detector

Last Answer : A. Orthomode transducer

The common-emitter transistor circuit can amplify a small current signal because a small change in the signal current produces one of the following. Does the change in signal produce a large change in the: w) emitter-base voltage x) base current y) collector current z) collector voltage

Description : The common-emitter transistor circuit can amplify a small current signal because a small change in the signal current produces one of the following. Does the change in signal produce a large change in the: w) emitter-base voltage x) base current y) collector current z) collector voltage

Last Answer : ANSWER: Y -- COLLECTOR CURRENT

In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the

Description : In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the base current is: (1) 10 µA (2) 100 µA (3) 1 A (4) 10 A 

Last Answer : In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the base current is: 100 µA

When a transistor is connected in common emitter mode, it with have

Last Answer : When a transistor is connected in common emitter mode, it with have medium input resistance and high output resistance.

What is the input current in the common-emitter circuit?

Description : What is the input current in the common-emitter circuit?

Last Answer : Base current (IB).

For the active mode BJT operation (A) Emitter Base Junction is Forward Biased and Collector

Description : For the active mode BJT operation (A) Emitter Base Junction is Forward Biased and Collector Base Junction is Forward Biased (B) Emitter Base Junction is Reverse Biased and Collector Base Junction ... Biased (D) Emitter Base Junction is Reverse Biased and Collector Base Junction is Forward Biased

Last Answer : For the active mode BJT operation Emitter Base Junction is Forward Biased and Collector Base Junction is Reverse Biased.

What type of radar detects range, bearing, and height?

Description : What type of radar detects range, bearing, and height?

Last Answer : Three-dimensional.

As shown in the illustration, which of the elements listed does the line 'B' represent in the basic schematic symbol of a PNP transistor? EL-0068 A. Base B. Emitter C. Cathode D. Collector

Description : As shown in the illustration, which of the elements listed does the line 'B' represent in the basic schematic symbol of a PNP transistor? EL-0068 A. Base B. Emitter C. Cathode D. Collector

Last Answer : Answer: D

Which of the listed components does line 'C' represent for the transistor illustrated? EL-0068 A. Grid B. Plate C. Emitter D. Collector

Description : Which of the listed components does line 'C' represent for the transistor illustrated? EL-0068 A. Grid B. Plate C. Emitter D. Collector

Last Answer : Answer: C

In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Description : In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Last Answer : (a) NPN

The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Description : The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Last Answer : (a) Acts as a supplier of charge carriers

A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Description : A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Last Answer : (a) Emitter

In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Description : In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Last Answer : a) located on emitter

The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Description : The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Last Answer : (d) none of above

In p-n-p transistor, collector current is (a) Equal to emitter current (b) slightly less than emitter current (c) greater than emitter current (d) any of above

Description : In p-n-p transistor, collector current is (a) Equal to emitter current (b) slightly less than emitter current (c) greater than emitter current (d) any of above

Last Answer : (c) greater than emitter current

In n-p-n transistor, p works as ________ (a) Collector (b) emitter (c) base (d) any of above

Description : In n-p-n transistor, p works as ________ (a) Collector (b) emitter (c) base (d) any of above

Last Answer : c) base

The central region of transistor is called (a) Base (b) emitter (c) collector (d) neutral

Description : The central region of transistor is called (a) Base (b) emitter (c) collector (d) neutral

Last Answer : (b) emitter

What are the three elements of a bipolar transistor? Are they the: w) grid, plate, cathode x) suppressor, deflector, target y) energizer, controller, terminus z) emitter, base, collector

Description : What are the three elements of a bipolar transistor? Are they the: w) grid, plate, cathode x) suppressor, deflector, target y) energizer, controller, terminus z) emitter, base, collector

Last Answer : ANSWER: Z -- EMITTER, BASE, COLLECTOR

When an NPN transistor is properly biased then most of the electrons from the emitter

Description : When an NPN transistor is properly biased then most of the electrons from the emitter   (A) recombine with holes in the base (B) recombine in the emitter itself (C) pass through the base to the collector (D) are stopped by the junction barrier

Last Answer : a

If a transistor were operated with emitter and collector interchanged, then

Description : If a transistor were operated with emitter and collector interchanged, then  1 .emitter current will increase  2. Collector current will increase  3. Base current will decrease  4. No current flow will take place 

Last Answer : If a transistor were operated with emitter and collector interchanged, then Collector current will increase 

Explain working of envelope detector with suitable diagram and waveform.

Description : Explain working of envelope detector with suitable diagram and waveform.

Last Answer : Envelope Detector: An Envelope Detector is an electronic circuit that takes a high frequency signal as input and provides an output which is as envelopes of the original signal. The capacitor ... decreases the responsiveness thus, real-world designs must be optimized for the application.

What are the four most common materials used in semiconductor detector fabrication?

Description : What are the four most common materials used in semiconductor detector fabrication?

Last Answer : Silicon, gallium arsenide, germanium, and indium phosphide.

To what circuit arrangement is a common-base detector equivalent?

Description : To what circuit arrangement is a common-base detector equivalent?

Last Answer : A diode detector followed by a stage of audio amplification.

Cross modulation on a receiver is eliminated at the A. RF stage B. mixer stage C. IF stage D. detector stage

Description : Cross modulation on a receiver is eliminated at the A. RF stage B. mixer stage C. IF stage D. detector stage

Last Answer : D. detector stage

What is junction transistor ?

Description : What is junction transistor ?

Last Answer : The origin of the word transistor is from the two words Transfer Resistor . It is so named because the transistor transmits the signal from the low-voltage circuit to the high-voltage circuit. ... transistor. The invention of the transistor is one of the best inventions of the twentieth century.

In the illustrated amplifier, the base of the transistor is what type of material? EL-0022 A. N type B. P type C. metal oxide insulator D. alloy junction material

Description : In the illustrated amplifier, the base of the transistor is what type of material? EL-0022 A. N type B. P type C. metal oxide insulator D. alloy junction material

Last Answer : Answer: A

Figure 'B' shown in the illustration represents a/an ____________. EL-0067 A. silicon controlled rectifier B. junction field effect transistor C. diac thyristor D. IG MOS field effect transistor

Description : Figure 'B' shown in the illustration represents a/an ____________. EL-0067 A. silicon controlled rectifier B. junction field effect transistor C. diac thyristor D. IG MOS field effect transistor

Last Answer : Answer: A

Figure 'A' of the diagram shown in the illustration represents a/an ____________. EL-0078 A. silicon controlled rectifier B. IG or MOS field effect transistor C. triac thyristor D. junction field effect transistor

Description : Figure 'A' of the diagram shown in the illustration represents a/an ____________. EL-0078 A. silicon controlled rectifier B. IG or MOS field effect transistor C. triac thyristor D. junction field effect transistor

Last Answer : Answer: B

Figure 'B' of the diagram shown in the illustration represents a/an ____________. EL-0065 A. silicon controlled rectifier B. junction field effect transistor C. diac thyristor D. IG or MOS field effect transistor

Description : Figure 'B' of the diagram shown in the illustration represents a/an ____________. EL-0065 A. silicon controlled rectifier B. junction field effect transistor C. diac thyristor D. IG or MOS field effect transistor

Last Answer : Answer: B

For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Description : For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Last Answer : (c) reverse biased

Which is the most important building block of electronic devices? (a) Diode (b) p-n junction (c) transistor (d) rectifier

Description : Which is the most important building block of electronic devices? (a) Diode (b) p-n junction (c) transistor (d) rectifier

Last Answer : b) p-n junction

A transistor has (A) One p-n junction. (B) Two p-n junction. (C) Four p-n junction. (D) Five p-n junction.

Description : A transistor has (A) One p-n junction. (B) Two p-n junction. (C) Four p-n junction. (D) Five p-n junction.

Last Answer : (B) Two p-n junction.

A semiconductor device made up of a single p-n Junction is called a: w) transistor x) diode y) Fet z) integrated circuit

Description : A semiconductor device made up of a single p-n Junction is called a: w) transistor x) diode y) Fet z) integrated circuit

Last Answer : ANSWER: X -- DIODE

State reason BJT is called as bipolar junction transistor.

Description : State reason BJT is called as bipolar junction transistor.

Last Answer : BJT is called bipolar junction transistor because in BJT current conduction takes place due to majority as well as minority charge carriers.

Define junction field effect transistor (JFET) and give an example.

Description : Define junction field effect transistor (JFET) and give an example.

Last Answer : Junction Field-Effect Transistor: It is a semiconductor device having three terminals, namely Gate, Drain and Source, in which the current flow is controlled by an electric field set up by an external voltage applied ... : i) n-channel JFET and ii) p-channel JFET Examples of JFET: BFW 10, BFW 11 

A bipolar junction transistor (BJT) is used as a power control switch by biasing it in the cut-off region

Description : A bipolar junction transistor (BJT) is used as a power control switch by biasing it in the cut-off region (OFF state) or in the saturation region (ON state). In the ON state, for ... base-collector junction is reverse biased (D) both the base-emitter and base-collector junctions are forward biased

Last Answer : A BJT is as a power control switch by biasing it in cut-off region (OFF state) or in the saturation region (ON state). In  ON state, for BJT both the base-emitter and base- collector junctions are forward biased

The 'h' parameter equivalent circuit of a junction transistor is valid for

Description : The 'h' parameter equivalent circuit of a junction transistor is valid for   (A) High frequency, large signal operation (B) High frequency, small signal operation (C) Low frequency, large signal operation.

Last Answer : The 'h' parameter equivalent circuit of a junction transistor is valid for Low frequency, large signal operation.

In a junction transistor, the doping level of collector region is:

Description : In a junction transistor, the doping level of collector region is:  (1) Higher than emitter region (2) Lower than base region (3) Is higher than base region but lower than emitter region  (4) Independent of the doping of base and emitter regions.

Last Answer : In a junction transistor, the doping level of collector region is: Is higher than base region but lower than emitter region.

Besides eliminating the emitter-base battery, what other advantages can different biasing methods offer?

Description : Besides eliminating the emitter-base battery, what other advantages can different biasing methods offer?

Last Answer : Compensation for slight variations in transistor characteristics and changes in transistor conduction because of temperature variations.

the voltage drop across RS and R1 determines the amount of base-emitter ____ for Q1.

Description : the voltage drop across RS and R1 determines the amount of base-emitter ____ for Q1.

Last Answer : Bias.

What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Description : What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Last Answer : Negative

What causes the change in collector current in an emitter injection modulator?

Description : What causes the change in collector current in an emitter injection modulator?

Last Answer : Gain is varied by changing the voltage on the emitter.

Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Description : Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Last Answer : An amplifier.