When a transmitter uses a high-power oscillator to produce the output pulse, what switches the oscillator on and off?

When a transmitter uses a high-power oscillator to produce  the output pulse, what switches the oscillator on and off?
by

1 Answer

Answer :

High-voltage pulse from the modulator.
by

Related questions

What transmission method uses a stable cw reference oscillator, which is locked in phase with the transmitter frequency?

Description : What transmission method uses a stable cw reference oscillator, which is locked in phase with the transmitter frequency?

Last Answer : Pulse-Doppler.

The spectrum of a radar transmitter describes what characteristic of the output pulse?

Description : The spectrum of a radar transmitter describes what characteristic of the output pulse?

Last Answer : Frequency distribution

One of the following is a high powered RF ac basic transmitter that has two or more stages, the oscillator stage which determines the frequency opereation and RF amplifier stage orstages that develop the high power output. The purpose of which is to develop a good frequency stability. A. Goldsmith B. MOPA C. Alexanderson D. Hartley

Description : One of the following is a high powered RF ac basic transmitter that has two or more stages, the oscillator stage which determines the frequency opereation and RF amplifier stage orstages that develop the ... to develop a good frequency stability. A. Goldsmith B. MOPA C. Alexanderson D. Hartley

Last Answer : B. MOPA

In an fm transmitter, when does an oscillator generate only a steady frequency?

Description : In an fm transmitter, when does an oscillator generate only a steady frequency?

Last Answer : When no modulation is present.

What is the function of the oscillator in a cw transmitter?

Description : What is the function of the oscillator in a cw transmitter?

Last Answer : It generates an rf carrier at a given frequency within required limits.

What component in a blocking oscillator controls pulse width?

Description : What component in a blocking oscillator controls pulse width?

Last Answer : Transformer.

What signal is used to synchronize the coherent oscillator to a fixed phase relationship with the transmitted pulse?

Description : What signal is used to synchronize the coherent oscillator to a fixed phase relationship with the transmitted pulse?

Last Answer : Coho lock pulse.

What controls transmitter pulse width?

Description : What controls transmitter pulse width?

Last Answer : The modulator.

What controls transmitter pulse width?

Description : What controls transmitter pulse width?

Last Answer : The modulator.

How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Description : How do you eliminate radio frequency variation of an oscillator transmitter caused by its supply voltage? A. Use new power supply B. Lossen power supply shielding C. Use of regulated power supply D. Use of high capacitor in the supply circuit

Last Answer : C. Use of regulated power supply

What is the range of earth terminal transmitter output power?

Description : What is the range of earth terminal transmitter output power?

Last Answer : Up to 20 kilowatts.

Which oscillator uses tapped capacitors for feedback?

Description : Which oscillator uses tapped capacitors for feedback?

Last Answer : Colpitts.

Which oscillator uses a tapped inductor for feedback?

Description : Which oscillator uses a tapped inductor for feedback?

Last Answer : Hartley.

Which oscillator uses a tickler coil for feedback?

Description : Which oscillator uses a tickler coil for feedback?

Last Answer : Armstrong.

Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections B. Power supply voltage changes C. Loose connections in the oscillator, amplifier, or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Description : Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections ... , or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Last Answer : D. DC and RF heating of resistors, causing then to change values.

One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. Heating of capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Description : One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. ... capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Last Answer : B. Heating of capacitor in the oscillator

Type of emission produced by one of the early radio transmitter in trains of damped RF ac waves where its oscillator is coupled to a long wire antenna, normally used in radio telegraph and having sidebands on its carrier. A. Digital emission B. Key emission C. Cycle emission D. Spark emission

Description : Type of emission produced by one of the early radio transmitter in trains of damped RF ac waves where its oscillator is coupled to a long wire antenna, normally used in radio telegraph and having sidebands on its carrier. A. Digital emission B. Key emission C. Cycle emission D. Spark emission

Last Answer : D. Spark emission

The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Description : The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Last Answer : B. Closer coupling between the oscillator and the antenna.

One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency oscillation. A. Heating and expansion of oscillator coil B. DC and RF ac heating of resistors which cause change in values C. Heating of capacitor in the oscillatorD. Loose connections in the oscillator, amplifier, or antenna circuits.

Description : One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency ... capacitor in the oscillator D. Loose connections in the oscillator, amplifier, or antenna circuits.

Last Answer : D. Loose connections in the oscillator, amplifier, or antenna circuits.

In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor

Description : In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor of the crystal resonator is  (a) > 100 (b) > 500 (c) > 1000 (d) > 20000

Last Answer : In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor of the crystal resonator is  > 1000

What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Description : What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Last Answer : Frequency stability.

What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Description : What is the primary advantage of power-amplifier transmitters over keyed-oscillator transmitters?

Last Answer : Frequency stability.

For an earth station transmitter, with an antenna output power of 40dBW 10,000W, a back-off loss of 3dB, a

Description : For an earth station transmitter, with an antenna output power of 40dBW 10,000W, a back-off loss of 3dB, a total branching and feeder loss of 3dB, a total branching and feeder loss of 3dB and transmit ... effective isotropic radiated power (EIRP will be  a) 38dBW b) 40 dBW c 36 dBW d) 47 dBW

Last Answer : For an earth station transmitter, with an antenna output power of 40dBW 10,000W, a back-off loss of 3dB, a total branching and feeder loss of 3dB, a total branching and feeder loss of 3dB and transmit antenna gain of 4dB, the effective isotropic radiated power (EIRP will be 38dBW

Why is a high-gain transistor used in the phase-shift oscillator?

Description : Why is a high-gain transistor used in the phase-shift oscillator?

Last Answer : Because of the losses encountered in the RC networks.

In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal? In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal?

Description : In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal?

Last Answer : Local oscillator and coherent oscillator.

Ships’ generators produce 450-volt, three-phase, ac power; however, most equipment uses 117-volt, single-phase power What transformers and connections are used to convert 450- volt, threephase power to 117-volt, single-phase power?

Description : Ships’ generators produce 450-volt, three-phase, ac power; however, most equipment uses 117-volt, single-phase power What transformers and connections are used to convert 450- volt, threephase power to 117-volt, single-phase power?

Last Answer : A method of generating oscillations, a method of turning the oscillations on and off (keying), and an antenna to radiate the energy.

A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Description : A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Last Answer : . One or the other of the inputs must be HIGH, but not both at the same time.

A NAND gate has inputs labeled as A, B, and C. If A and B are HIGH, C must be at what logic level to produce a HIGH output?

Description : A NAND gate has inputs labeled as A, B, and C. If A and B are HIGH, C must be at what logic level to produce a HIGH output?

Last Answer : . Low.

How many of those combinations will produce a HIGH output?

Description : How many of those combinations will produce a HIGH output?

Last Answer : Seven.

Type of modulation used in TV broadcast visual transmitter. A. Pulse modulation B. DSBFC C. Vestigial sideband D. SSBFC

Description : Type of modulation used in TV broadcast visual transmitter. A. Pulse modulation B. DSBFC C. Vestigial sideband D. SSBFC

Last Answer : C. Vestigial sideband

Motors, switches, voltage regulators, generators, etc., are a few examples of emi sources. What type of emi comes from these sources?

Description : Motors, switches, voltage regulators, generators, etc., are a few examples of emi sources. What type of emi comes from these sources?

Last Answer : Man-made.

What type of switches are used as duplexers?

Description : What type of switches are used as duplexers?

Last Answer : . Electronic.

Why are multicontact switches used?

Description : Why are multicontact switches used?

Last Answer : Multicontact switches make possible the control of more than one circuit or the selection of one of several possible circuits with a single switch.

Load regulation is a measure of a power supplies ability keep a constant output under conditions of changing A) Line voltage B) Current demand C) Temperature D) Oscillator frequency.

Description : Load regulation is a measure of a power supplies ability keep a constant output under conditions of changing A) Line voltage B) Current demand C) Temperature D) Oscillator frequency.

Last Answer : A) Line voltage

Transmitter power readings are most often referenced to what power level?

Description : Transmitter power readings are most often referenced to what power level?

Last Answer : 1 milliwatt.

What type of klystron is used as the final stage of a power- amplifier transmitter?

Description : What type of klystron is used as the final stage of a power- amplifier transmitter?

Last Answer : Multicavity klystron.

What type of klystron is used as the final stage of a power- amplifier transmitter?

Description : What type of klystron is used as the final stage of a power- amplifier transmitter?

Last Answer : Multicavity klystron.

What type of radar transmitter power is measured over a period of time?

Description : What type of radar transmitter power is measured over a period of time?

Last Answer : Average power.

All the power sent down a transmission line from a transmitter can be transferred to an antenna under what optimum conditions?

Description : All the power sent down a transmission line from a transmitter can be transferred to an antenna under what optimum conditions?

Last Answer : When the characteristic impedance of the transmission line and the load impedance are equal.

Name a disadvantage of sine-wave oscillator synchronizers.

Description : Name a disadvantage of sine-wave oscillator synchronizers.

Last Answer : It requires additional shaping circuits.

What basic circuits meet the requirements of an externally synchronized master oscillator?

Description : What basic circuits meet the requirements of an externally synchronized master oscillator?

Last Answer : Sine-wave oscillator, single-swing blocking oscillator, and master trigger (astable) multivibrator.

Name a disadvantage of sine-wave oscillator synchronizers.

Description : Name a disadvantage of sine-wave oscillator synchronizers.

Last Answer : . It requires additional shaping circuits.

What basic circuits meet the requirements of an externally synchronized master oscillator?

Description : What basic circuits meet the requirements of an externally synchronized master oscillator?

Last Answer : Sine-wave oscillator, single-swing blocking oscillator, and master trigger (astable) multivibrator.

What type of multivibrator can be used as a radar master oscillator?

Description : What type of multivibrator can be used as a radar master oscillator?

Last Answer : Free-running.

What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Description : What is the polarity of the first alternation of the tank circuit in an emitter-loaded npn pulsed oscillator?

Last Answer : Negative

Which components provide the regenerative feedback signal in the phase-shift oscillator?

Description : Which components provide the regenerative feedback signal in the phase-shift oscillator?

Last Answer : Resistor-capacitor networks.

What is the identifying feature of a Colpitts oscillator?

Description : What is the identifying feature of a Colpitts oscillator?

Last Answer : Split capacitors.

What is the difference between the series-fed and the shunt-fed Hartley oscillator?

Description : What is the difference between the series-fed and the shunt-fed Hartley oscillator?

Last Answer : In the series-fed Hartley oscillator, dc flows through the tank circuit.

What is the main difference between the Armstrong oscillator and the Hartley oscillator?

Description : What is the main difference between the Armstrong oscillator and the Hartley oscillator?

Last Answer : Feedback coil. Armstrong uses a separate coil. Hartley uses a tapped coil.

In a heterodyne-type frequency meter, what is the difference between the oscillator frequency and the unknown frequency?

Description : In a heterodyne-type frequency meter, what is the difference between the oscillator frequency and the unknown frequency?

Last Answer : Beat frequency.