What is preferred location for pressure instrument nozzle on drum?

What is preferred location for pressure instrument nozzle on drum?
by

1 Answer

Answer :

Answer: Must be anywhere in the vapor space, preferable at the top section of drum
by

Related questions

What is preferred location for steam out nozzle on drum?

Description : What is preferred location for steam out nozzle on drum?

Last Answer : Answer: At the end opposite to the maintenance access.

What is preferred location for process nozzles on drum?

Description : What is preferred location for process nozzles on drum?

Last Answer : Answer: Minimum from the tangent line.

What is preferred location for temperature instrument?

Description : What is preferred location for temperature instrument?

Last Answer : Answer: Must be in liquid space, preferably on the bottom section of drum.

What is preferred location for level instrument nozzles?

Description : What is preferred location for level instrument nozzles?

Last Answer : Answer: Away from the turbulence at the liquid outlet nozzle, although the vessel is provided with a vortex breaker, instrument should be set in the quiet zone of the vessel for example on the opposite side of the weir or baffle or near the vapor outlet end.

What is preferred location for vent?

Description : What is preferred location for vent?

Last Answer : Answer: AT the top section of drum at the end opposite the steam out connection.

What is preferred location for drain?

Description : What is preferred location for drain?

Last Answer : Answer: Must be located at the bottom section of drum.

How to located feed nozzle?

Description : How to located feed nozzle?

Last Answer : Answer: Must be oriented in specific area of tray by means of internal piping.

What is the standard to check nozzle allowables for

Description : What is the standard to check nozzle allowables for

Last Answer : (i) Centrifugal pump (ii) Turbine (iii) Centrifugal compressor (iv) Air cooler (i) API 610 (ii) NEMA SM 23 (iii) API 617 (iv) API 661

What are drum supports?

Description : What are drum supports?

Last Answer : Answer: Skirt for large drums, legs, lugs, saddles for horizontal drums.

What are drum elevation requirements?

Description : What are drum elevation requirements?

Last Answer : Answer: NPSH, minimum clearance, common platforming, maintenance, operator access.

What are drum internals?

Description : What are drum internals?

Last Answer : Answer: Demister pads, Baffles, Vortex breakers, Distribution piping.

What is pressure balanced plug valve?

Description : What is pressure balanced plug valve?

Last Answer : Answer: With holes in port top and bottom connecting two chambers on top and bottom of plug, to reduce turning effort.

What pressure tests are carried out on valves?

Description : What pressure tests are carried out on valves?

Last Answer : Answer: Shell-hydrostatic, seat-hydrostatic, seat-pneumatic

What is the difference between Stress and Pressure?

Description : What is the difference between Stress and Pressure?

Last Answer : Answer: Stress is generated because of internal resistance force. Pressure is generated because of external force. Pressure can be a cause to generate stress.

What are necessary nozzles for pressure vessel?

Description : What are necessary nozzles for pressure vessel?

Last Answer : Answer: Inlet, outlet, manhole, drain, pressure relief, agitator, level gauge, pressure gauge, temperature element, vent and for steam-out.

What are necessary nozzles for non-pressure vessel?

Description : What are necessary nozzles for non-pressure vessel?

Last Answer : Answer: Inlet, outlet, vent, manhole, drain, overflow, agitator, temperature element, level instrument, and steam-out connection.

How to located temperature and pressure instruments?

Description : How to located temperature and pressure instruments?

Last Answer : Answer: Temperature in liquid space, at down-comer side and pressure in vapour space, in area except down-comer sector.

What pressure tests are carried out on valves?

Description : What pressure tests are carried out on valves?

Last Answer : Answer: Shell-hydrostatic, seat-hydrostatic, seat-pneumatic

What are the types of bonnets?

Description : What are the types of bonnets?

Last Answer : Answer: Bolted bonnet, bellow sealed bonnet, screwed on bonnet, union bonnets, A U-bolt and clamp type bonnet, breech-lock bonnet, pressure seal bonnet

What are types of gate valves?

Description : What are types of gate valves?

Last Answer : Answer: Solid plane wedge, solid flexible wedge, split wedge, double disc parallels seats, double disc wedge, single disc single seat gate or slide, single disc parallel seats, plug gate valve.

What is lantern ring?

Description : What is lantern ring?

Last Answer : Answer: It’s a collection point to drain off any hazardous seepage or as a point where lubricant can be injected; it is in the middle of packing rings.

How to close a gate valve?

Description : How to close a gate valve?

Last Answer : Answer: Turn the hand-wheel in clockwise direction.

What are port types for gate valves?

Description : What are port types for gate valves?

Last Answer : Answer: Full port and reduced port. Default is reduced bore. Full port has to be specified in bom.

What is double disc globe valve?

Description : What is double disc globe valve?

Last Answer : Answer: Has two discs bearing on separate seats spaced apart, on a single shaft, for low torque, used for control valves.

Where WYE body globe valve is used?

Description : Where WYE body globe valve is used?

Last Answer : Answer: In line ports with stem emerging at 45 degree, for erosive fluids due to smoother flow pattern.

Where plug type disc globe valve is used?

Description : Where plug type disc globe valve is used?

Last Answer : Answer: For severe regulating service with gritty liquids such as boiler feedwater and for blow off service.

What are types of globe valve?

Description : What are types of globe valve?

Last Answer : Answer: Angle globe valve, plug type disc globe valve, WYE-body globe valve, composite disc globe valve, double disc globe valve.

What are characteristics of globe valve stem?

Description : What are characteristics of globe valve stem?

Last Answer : Answer: Always rising design, with disk nut at the lower end and handwheel at upper end.

What are globe valve disk types?

Description : What are globe valve disk types?

Last Answer : Answer: Flat faced type for positive shutoff, loose plug type for plug renewal or needle type for finer control.

What are globe valve port types?

Description : What are globe valve port types?

Last Answer : Answer: Full port: More than 85% of bore size, Reducer port: One size less than the connected pipe.

How to install a globe valve?

Description : How to install a globe valve?

Last Answer : Answer: Globe valve should be installed such that the flow is from the underside of the disk, Usually flow direction is marked on the globe valve.

What is needle valve?

Description : What is needle valve?

Last Answer : Answer: Full pyramid disc, same design as globe valve, smaller sizes, sw or threaded, flow control, disc can be integral with stem, inside screw, borged or barstock body and bonnet, manufacturers standard.

What is pinch valve?

Description : What is pinch valve?

Last Answer : Answer: Similar to diaphragm valve, with sleeves of rubber or PTFE, which get squeezed to control or stop the flow, Cast iron body, for very low service pressures like isolation of hose connections, manufacture standard.

What is dimensional standard for plug valve?

Description : What is dimensional standard for plug valve?

Last Answer : Answer: API 599.

What are eccentric plug valve?

Description : What are eccentric plug valve?

Last Answer : Answer: Off center plug, corrosive and abrasive service, on off action, moves into and away from seat eliminating abrasive wear.

What are permasil plug valve?

Description : What are permasil plug valve?

Last Answer : Answer: Plug valves with Teflon seat instead of sleeves, for on-off applications, can handle clean viscous and corrosive liquids, Graphite seat for high temperature applications. Drip tight shut off not possible.

What are Teflon sleeved plug valve?

Description : What are Teflon sleeved plug valve?

Last Answer : Answer: PTFE sleeve between plug and body of valve, low turning effort, minimum friction, temperature limitation, anti static design possible.

What are inverted plug design valve?

Description : What are inverted plug design valve?

Last Answer : Answer: Plug valve with taper portion up of plug. For 8” and higher size.

What are ventury pattern plug valve?

Description : What are ventury pattern plug valve?

Last Answer : Answer: Change of section through the body throat so graded to have ventury effect, minimum pressure loss.

What are short pattern plug valve?

Description : What are short pattern plug valve?

Last Answer : Answer: Valves with face to face dimension of gate valve, as a alternative to gate valve.

What is regular pattern plug valve?

Description : What is regular pattern plug valve?

Last Answer : Answer: Rectangular port, area almost equal to pipe bore, smooth transition from round body to rectangular port, for minimum pressure loss.

What are three patterns of plug valve design?

Description : What are three patterns of plug valve design?

Last Answer : Answer: Regular pattern, short pattern and ventury pattern.

What is metal seated lubricated plug valve?

Description : What is metal seated lubricated plug valve?

Last Answer : Answer: A plug valve with no plastic material, where grease is applied to contacting surfaces for easy operation.

What are uses of four way valve?

Description : What are uses of four way valve?

Last Answer : Answer: Reversal of pump suction and delivery, By pass of strainer or meter, reversal of flow through filter, heat exchanger or dryer.

What are the uses of three-way valve?

Description : What are the uses of three-way valve?

Last Answer : Answer: Alternate connection of the two supply lines to a common delivery vise versa, isolating one safety valve, division of flow with isolation facility.

What are types of flush bottom valves?

Description : What are types of flush bottom valves?

Last Answer : Answer: Valves with discs opening into the tank and valves with disks into the valve.

What are flush bottom valves?

Description : What are flush bottom valves?

Last Answer : Answer: Special type of valves used to drain out the piping, reactors and vessels, attached on pad type nozzles.

What is float valve?

Description : What is float valve?

Last Answer : Answer: Used to control liquid level in tanks, operated by float, which rises with liquid level and opens the valve to control water level. It can also remove air from system, in which case, air flows ... valve, float inside valve raises to close the valve and stop flow of water. Used in drip legs.

What is foot valve?

Description : What is foot valve?

Last Answer : Answer: Valve used to maintain a head of water on the suction side of sump pump, basically a lift check valve with integrated strainer.

What is safety valve?

Description : What is safety valve?

Last Answer : Answer: Rapid opening (popping action) full flow valve for air and other gases.