Explain in brief stability of a converter:

Explain in brief stability of a converter:
by

1 Answer

Answer :

The performance of converter changes with temperature age & power supply variation . So all the relevant parameters such as offset, gain, linearity error & monotonicity must be specified over the full temperature & power supply ranges to have better stability performances.
by

Related questions

Explain in brief the principle of operation of successive Approximation ADC.

Description : Explain in brief the principle of operation of successive Approximation ADC.

Last Answer : The circuit of successive approximation ADC consists of a successive approximation register (SAR), to find the required value of each bit by trial & error.With the arrival of START command, SAR sets the MSB ... /P signal. This O/P is low or High. This process continues until all bits are checked.

What is the common up-converter and down-converter IF? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz

Description : What is the common up-converter and down-converter IF? A. 36 MHz B. 40 MHz C. 70 MHz D. 500 MHz

Last Answer : C. 70 MHz

What is the common up-converter and down-converter IF for microwave communications? A. 60 MHz B. 80 MHz C. 120 MHz D. 70 MHz

Description : What is the common up-converter and down-converter IF for microwave communications? A. 60 MHz B. 80 MHz C. 120 MHz D. 70 MHz

Last Answer : D. 70 MHz

One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. Heating of capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Description : One of the following is a possible cause for a slow drift of frequency in a self-exited transmitter oscillator circuits resulting to a poor frequency stability. A. Loose shielding B. ... capacitor in the oscillator C. Poor soldered connections D. Faulty capacitor, resistor, tubes or resistors

Last Answer : B. Heating of capacitor in the oscillator

One of the following is a high powered RF ac basic transmitter that has two or more stages, the oscillator stage which determines the frequency opereation and RF amplifier stage orstages that develop the high power output. The purpose of which is to develop a good frequency stability. A. Goldsmith B. MOPA C. Alexanderson D. Hartley

Description : One of the following is a high powered RF ac basic transmitter that has two or more stages, the oscillator stage which determines the frequency opereation and RF amplifier stage orstages that develop the ... to develop a good frequency stability. A. Goldsmith B. MOPA C. Alexanderson D. Hartley

Last Answer : B. MOPA

The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Description : The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Last Answer : B. Closer coupling between the oscillator and the antenna.

One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency oscillation. A. Heating and expansion of oscillator coil B. DC and RF ac heating of resistors which cause change in values C. Heating of capacitor in the oscillatorD. Loose connections in the oscillator, amplifier, or antenna circuits.

Description : One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency ... capacitor in the oscillator D. Loose connections in the oscillator, amplifier, or antenna circuits.

Last Answer : D. Loose connections in the oscillator, amplifier, or antenna circuits.

Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections B. Power supply voltage changes C. Loose connections in the oscillator, amplifier, or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Description : Which of the following is one of the possible causes for a slow drift of frequency in a self exited transmitter oscillator circuits resulting to a poor frequency stability? A. Poor soldered connections ... , or antenna circuits D. DC and RF heating of resistors, causing then to change values.

Last Answer : D. DC and RF heating of resistors, causing then to change values.

What do you call a circuit that controls the magnetron output?A. Inverter B. Impeller C. Modulator D. Converter

Description : What do you call a circuit that controls the magnetron output? A. Inverter B. Impeller C. Modulator D. Converter

Last Answer : C. Modulator

A device that connects two dissimilar networks and performs the protocol conversion. A. Gateway B. Coupler C. Transformer D. Converter

Description : A device that connects two dissimilar networks and performs the protocol conversion. A. Gateway B. Coupler C. Transformer D. Converter

Last Answer : A. Gateway

What is stability factor?

Description : What is stability factor?

Last Answer : Stability factor is defined as the rate of change of collector current with respect to the rate of change of reverse saturation current.

Give the disadvantages of flash type A/D converter.

Description : Give the disadvantages of flash type A/D converter.

Last Answer : The simultaneous type A/D converter is not suitable for A/D conversion with more than 3 or 4 digital output bits. Then (2n-1)comparators are required for an n-bit A/D converter and the number of comparators required doubles for each added bit.

What are the specifications of D/A converter?

Description : What are the specifications of D/A converter?

Last Answer : The specifications are accuracy, offset voltage, monotonicity, resolution, and settling time.

Define accuracy of converter.

Description : Define accuracy of converter.

Last Answer : Absolute accuracy: It is the maximum deviation between the actual converter output & the ideal converter output.  Relative accuracy: It is the maximum deviation after gain & offset errors have been removed. ... of a converter is also specified in form of LSB increments or % of full scale voltage.

Define resolution of a data converter.

Description : Define resolution of a data converter.

Last Answer : The resolution of a converter is the smallest change in voltage which may be produced at the output or input of the converter. Resolution (in volts)= VFS/2n-1=1 LSB increment. The resolution of an ADC is defined as the smallest change in analog input for a one bit change at the output.

What is integrating type converter?

Description : What is integrating type converter?

Last Answer : An ADC converter that perform conversion in an indirect manner by first changing the analog I/P signal to a linear function of time or frequency and then to a digital code is known as integrating type A/D converter.

Write down the drawback of weighted D/A converter.

Description : Write down the drawback of weighted D/A converter.

Last Answer : The main disadvantage of binary weighted D/A converter is the requirement of wide range of resister values.As the length of the binary word is increased .the range of resister values needed also increases.

What are the applications of V-I converter?

Description : What are the applications of V-I converter?

Last Answer : 1.Low voltage dc and ac voltmeter 2.L E D 3.Zener diode tester

‘Fraternity leads to social stability’ – Explain the statement.

Description : ‘Fraternity leads to social stability’ – Explain the statement.

Last Answer : ‘Fraternity leads to social stability’ – Explain the statement.

What One theme that connect all information in biology is stability and change describe both of the other them that connect all the information in biology use an example to help explain the theme?

Description : What One theme that connect all information in biology is stability and change describe both of the other them that connect all the information in biology use an example to help explain the theme?

Last Answer : 2

Explain why half-filled orbitals have extra stability.

Description : Explain why half-filled orbitals have extra stability.

Last Answer : Ans. It has symmetrical electron density as well as greater exchange energy.

Explain the concept of ‘stability of vehicle on turn and slopes’ with sketch.

Description : Explain the concept of ‘stability of vehicle on turn and slopes’ with sketch.

Last Answer : Stability of vehicle on Slope: Let the vehicle rest on a slope of inclination Q to the horizontal. This alters the distribution of the weight between the front and back axle and gives rise to reaction ... center of gravity of the vehicle should be lower; speed during turning should be lower.  

Explain the stability of carbonates & bicarbonates of alkali metals .

Description : Explain the stability of carbonates & bicarbonates of alkali metals . 

Last Answer : The alkali metals form salts with all the oxo-acids. They are generally soluble in water and thermally stable. Their carbonates (M2CO3) and in most cases the hydrogencarbonates (MHCO3) also are highly ... the formation of more stable Li2O and CO2. Its hydrogencarbonate does not exist as a solid.  

What is the significance of signal conditioner? Explain the need of following in mechatronics system. i) Isolator ii) Filter iii) Amplifier iv) Data converter

Description : What is the significance of signal conditioner? Explain the need of following in mechatronics system. i) Isolator ii) Filter iii) Amplifier iv) Data converter

Last Answer : Significance: Signal conditioning means manipulating an analog signal in such a way that it meets the requirements of the next stage for further processing. Signal inputs accepted by signal ... -frequency converters, current-to-voltage converters, current loop converters, and charge converters.  

Explain buck converter.

Description : Explain buck or step down converter and draw its waveforms.

Last Answer : Buck converter or Step down converter: Buck converter is a step-down converter. The buck converter step-down the output voltage and step up the output current. Buck converter is a DC to DC converter. ... load. The output voltage is controlled by controlling on period and off period.

Explain full bridge converter.

Description : Explain the operation of full bridge converters with their different operating modes. State its advantages and disadvantages.

Last Answer : Full bridge converter: Full bridge converter provides isolation between input and output. Full bridge converter is used for step up or step down the input voltage. Full bridge converter consists of four power semiconductor ... Require filter on both input and output.

Explain flyback converter.

Description : Explain flyback converter and draw its waveforms.

Last Answer : Flyback converter: A flyback converter is used for getting DC output and for isolating input mains and output voltage. A flyback converter is like a buck-boost converter with input and output isolated. There ... during the off time transformer transfer the energy to load.

Explain buck boost converter.

Description : Explain buck boost converter and draw its waveforms.

Last Answer : Buck-Boost converter: The buck-boost converter consists of a transistor for switching purpose, diode, inductor, and capacitor. Buck-boost converter is the combination of the buck converter and boost ... In buck-boost converter both input current and diode current are discontinuous.

What is Miller crystal oscillator? Explain its operation.

Description : What is Miller crystal oscillator? Explain its operation.

Last Answer : It is nothing but a Hartley oscillator its feedback Network is replaced by a crystal. Crystal normally generate higher frequency reactance due to the miller capacitance are in effect between the transistor terminal.

Explain how MOSFET functions?

Description : Explain how MOSFET functions?

Last Answer : Ans:There are two ways in which a MOSFET can function. The first is known as depletion mode . When there is no voltage on the gate, the channel exhibits its maximum conductance . As the voltage ... application of a voltage to the gate. The greater the gate voltage, the better the device conducts.

Explain working of MOSFET.

Description : Explain working of MOSFET.

Last Answer : MOSFET is a special type of field-effect transistor ( FET ) that works by electronically varying the width of a channel along which charge carriers flow. The wider the channel, the better the ... source and the drain and is insulated from the channel by an extremely thin layer of metal oxide.

Explain about the characteristics of a transistor?

Description : Explain about the characteristics of a transistor?

Last Answer : Input characteristics: it is drawn between input voltage & input current while keeping output voltage as constant. Output characteristics: It is drawn between the output voltage &output current while keeping input current as constant.

Explain about the various regions in a transistor?

Description : Explain about the various regions in a transistor?

Last Answer : The three regions are active region saturation region cutoff region.

Explain Clipping using Zener Diode?

Description : Explain Clipping using Zener Diode?

Last Answer : one or two zener diodes are used to clip the voltage VIN. In the first circuit, the voltage is clipped to the reverse breakdown voltage of the zener diode. In the second, it is limited to the reverse breakdown voltage plus the voltage drop across one zener diode.

Can you explain clipping circuit?

Description : Can you explain clipping circuit?

Last Answer : A clipping circuit consists of linear elements like resistors and non-linear elements like junction diodes or transistors. Thus a clipper circuit can remove certain portions of an arbitrary waveform ... or two levels Clipping Circuits are also called as Slicers, amplitude selectors or limiters.

Explain the process of oxidation.

Description : Explain the process of oxidation.

Last Answer : The silicon wafers are stacked up in a quartz boat & then inserted into quartz furnace tube. The Si wafers are raised to a high temperature in the range of 950 to 1150oC & at the same time, exposed to a gas containing O2 or H2O or both.The chemical action is Si + 2H2O > Si O2+ 2H2

Explain in brief the following: (i) Retting (ii) Ginning (iii) Broadcasting -Geography

Description : Explain in brief the following: (i) Retting (ii) Ginning (iii) Broadcasting -Geography

Last Answer : (i) Retting-It is the soaking of the stalk and the removal of the fibre from the bark after plants are submerged in a pool of gently flowing clear water to separate the long stands of ... (iii) Broadcasting-The scattering of seeds by hand over the soil is called Broad casting method of sowing.

Explain in brief the history of land reclamation in Mumbai. -SST 10th

Description : Explain in brief the history of land reclamation in Mumbai. -SST 10th

Last Answer : Originally Bombay was a city of several islands which were joined into one land mass over a period of time. The first project began in 1784, when the Governor of Bombay, William Hornby, ... miles. As the population continued to increase rapidly, more and more area was reclaimed from the sea.

Explain in brief the ‘Dandi March’. -SST 10th

Description : Explain in brief the ‘Dandi March’. -SST 10th

Last Answer : (i) Mahatma Gandhi started his famous Salt March' or Dandi March' on 11th March, 1930 accompanied by 78 of his trusted volunteers. (ii) The march was to cover 240 miles from Gandhi ... law by manufacturing salt by boiling sea water. (iv) This marked the beginning of Civil Disobedience Movement.

Explain in brief any three of the consumer rights. -SST 10th

Description : Explain in brief any three of the consumer rights. -SST 10th

Last Answer : The consumer has following rights : (i) Right to be informed : A consumer has right to know the important information about the goods and services they purchase. (ii) Right to choose ... to seek redressal : A consumer has right to seek redressal against unfair trade practices and exploitation.

List the stages in the evolution of the earth and explain each stage in brief. -Geography

Description : List the stages in the evolution of the earth and explain each stage in brief. -Geography

Last Answer : The earth was mostly in a volatile state during its primordial stage. Due to gradual increase in density the temperature inside has increased. As a result the material inside started getting separated ... years. It can be assumed that life began to evolve sometime 3,800 million years ago,

Explain the mechanism of sex determination in humans. Or With the help of a flow chart explain in brief how the sex of a newborn is genetically determined in human beings. Which of the two parents, the mother or the father, is responsible for determination of sex of a child? -Biology

Description : Explain the mechanism of sex determination in humans. Or With the help of a flow chart explain in brief how the sex of a newborn is genetically determined in human beings. Which of the two parents, the mother or the father, is responsible for determination of sex of a child? -Biology

Last Answer : Mechanism of Sex Determination in Human Beings: In human beings, the sex of the individual is genetically determined.Sex determination is the process by which sex of a new born individual can be ... happens at fertilisation. Thus, father is responsible for the determination of the sex of a child.

What does an antivirus software do? Explain in brief with any two points. -Technology

Description : What does an antivirus software do? Explain in brief with any two points. -Technology

Last Answer : 1. Antivirus software is a computer program that detects, prevents and takes action to disarm or remove malicious software programs, such as viruses and worms.2. Displays health of your computer system.

Explain in brief any 2 security threats to computer networks. -Technology

Description : Explain in brief any 2 security threats to computer networks. -Technology

Last Answer : Two security threats to computer networks are as follows :1. Computer worm It is a standalone malware computer program that replicates itself in order to spread to other computers.2. Spam It is flooding the Internet with many copies of the same message.

Explain Electrophoresis in brief with the help of diagram. What are its applications?

Description : Explain Electrophoresis in brief with the help of diagram. What are its applications?

Last Answer : Explain Electrophoresis in brief with the help of diagram. What are its applications?

Explain in brief the characteristic features of Phylum Hemichordata.

Description : Explain in brief the characteristic features of Phylum Hemichordata.

Last Answer : Explain in brief the characteristic features of Phylum Hemichordata.

Explain in brief the divisions of sub-phylum Vertebrata.

Description : Explain in brief the divisions of sub-phylum Vertebrata.

Last Answer : Explain in brief the divisions of sub-phylum Vertebrata.

Explain in brief about electrostatic bonds in antigen-antibody interaction ?

Description : Explain in brief about electrostatic bonds in antigen-antibody interaction ?

Last Answer : These are formed due to the attraction between opposite charged protein side chains.

Explain in brief about hydrogen bonds antigen-antibody interaction ?

Description : Explain in brief about hydrogen bonds antigen-antibody interaction ?

Last Answer : Reversible hydrogen bonds are formed between hydrophilic groups such as hydroxyl, amino and carboxylic group. Although hydrogen bonds are relatively weak, they play an important role in interaction of antigen-antibody.

Explain in brief about hydrophobic interactions in antigen-antibody interaction ?

Description : Explain in brief about hydrophobic interactions in antigen-antibody interaction ?

Last Answer : Contribute up to 50% of the total strength of antigen- antibody interactions. These reactions are found when ever the side chains of non-polar amino acids of antigen-antibody come together.