Out of carbon(diamond)and carbon (graphite) whose enthalpy of formation is taken as zero?

1 Answer

Answer :

Ans. Enthalpy of formation of carbon in the form of graphite is taken as zero because it is a more commonly found in stable form of carbon.

Related questions

Description : What is the sign of enthalpy of formation of highly stable compound?

Last Answer : Ans. Negative.

Description : Write an expression in the form of chemical equation for the standard enthalpy of formation (∆Hf) of CO (g).

Last Answer : Ans. C(s) +1/2 O2(g) → CO (g)

Description : What is meant by entropy driven reaction? How can the reaction with positive change of enthalpy and entropy be made entropy driven?

Last Answer : Ans.The free energy change of a reaction is given by ΔG = ΔH - TΔS For a reaction to be spontaneous, ΔG should be -ve. If both ΔH and ΔS are positive ΔG can be -ve if TΔS>ΔH in magnitude. Thus, entropy ... is low, TΔS should be greater than ΔH (ii) If ΔS is small, T should be so large that TΔS>ΔH.

Description : Give enthalpy (H) of all elements in their standard state.

Last Answer : Ans. In standard state enthalpies of all elements is zero.

Description : Classify the following properties as extensive and intensive properties: Molar heat capacity, temperature, enthalpy and volume.

Last Answer : Ans. Extensive properties : Enthalpy and volume. Intensive properties: Molar heat capacity, temperature.

Description : (i)What happens to the internal energy of the system. (a) if work is done by the system. (b)Work is done on the system. (ii) Why enthalpy of neutralization of strong acid and base is consant?

Last Answer : Ans. (i).(a)ΔU Decreases. (ΔU = q - w) (b)ΔU increases. (ΔU = q + w) (ii) Strong acids and bases dissociate completely into ions in aqueous solution and form 1 mole of water.

Description : (i)State why heat changes in physical and chemical processes are indicated by enthalpy changes and not by entropy changes? (ii)What are the limitations of First Law of thermodynamics?

Last Answer : (i) Most of the processes are carried out in an open system i.e, at constant pressure. (ii)(a) Can’t explain the feasibility of the reaction. (b)It poses no restriction on the direction of flow of heat. (c)Practically it is not possible to convert the heat energy into an equivalent amount of work.

Description : Explain the absolute zero (in terms of volume) with the help of isobar.

Last Answer : Ans: At absolute zero ,volume approach to zero and below this temperature, the volume will be negative, which is meaningless. Hence absolute zero is the lowest possible temperature .

Description : Why the Equilibrium constant is taken as dimensionless?

Last Answer : Ans. Activities are used in place of molar Conc. These represent the concentration or pressure with respect to standard state.

Description : Assertion (A): Enthalpy of graphite is lower than that of diamond. Reason (R ) : Entropy of graphite is lower than that of diamond.

Last Answer : Assertion (A): Enthalpy of graphite is lower than that of diamond. Reason (R ) : Entropy of ... False. D. If both Assertion & Reason are false.

Description : Given standard enthalpy of formation of `CO(-110 "KJ mol"^(-1))` and `CO_(2)(-394 "KJ mol"^(-1))`. The heat of combustion when one mole of graphite bu

Last Answer : Given standard enthalpy of formation of `CO(-110 "KJ mol"^(-1))` and `CO_(2)(-394 "KJ mol"^(-1))`. The heat ... B. `-284` KJ C. `-394` KJ D. `-504` KJ

Description : Carbon occurs in nature in the purest form as - (1) Diamond (2) Graphite (3) Carbon black (4) Coal

Last Answer : (1) Diamond Explanation: There are three forms of pure carbon: Graphite, Coal and Diamond. All three are made up of elemental carbon, caol is the least pure when found in nature. Diamond is the purest form of Carbon.

Description : As which one of the following, does carbon occur in its purest form in nature? (1) Carbon black (2) Graphite (3) Diamond (4) Coal

Last Answer : (3) Diamond Explanation: The purest form of carbon is neither diamond nor graphene or graphite . It is 'Fullerene' , the purest form of carbon.

Description : Which of the following is the purest form of Carbon? (1) Charcoal (2) Granite (3) Diamond (4) Graphite

Last Answer : (3) Diamond Explanation: Because the carbon atoms in diamond are more tightly bound than in graphite (as diamond is the hardest material known), it is more difficult for impurities to get into the diamond lattice and as a result diamonds are often more pure than graphite.

Description : _____is not an allotrope of carbon. (1) Buckminsterfullerene (2) Carbon Doxide (3) Diamond (4) Graphite

Last Answer : (2) Carbon Doxide Explanation: Carbon is capable of forming many allotropes due to its valency. Well-known forms of carbon include diamond and graphite. Other allotropes in clude: include buckyballs (fullerenes), amorphous carbon, glassy carbon, carbon nanofoam, nanotubes,and others.

Description : Hardest allotrope of carbon is - (1) diamond (2) graphite (3) coke (4) lamp black

Last Answer : (1) diamond Explanation: Diamond is one well known allotrope of carbon. The hardness and high dispersion of light of diamond make it useful for both industrial applications and jewellery. Diamond is ... mineral. This makes it an excellent abrasive and makes it hold polish and luster extremely well.

Description : Hardest allotrope of carbon is (1) diamond (2) graphite (3) coke (4) lamp black

Last Answer : diamond

Description : In which of the following substances all carbon atoms are quaternary in nature ? (1) Graphite (2) Diamond (3) Teflon (4) Napthalene

Last Answer : Diamond

Description : Since the enthalpy of elements in their natural state is taken to be zero, the heat of formation `(Delta_(f)H)` of compounds

Last Answer : Since the enthalpy of elements in their natural state is taken to be zero, the heat of formation `( ... C. is zero D. May be positive or negative

Description : Explain why the gas fizzes out when soda water bottle is opened?

Last Answer : Ans. In soda water bottle carbon dioxide gas is dissolved under pressure. As soon as the bottle is opened, the pressure inside the bottle tends to decrease, so the solubility decreases and gas escapes out.

Description : Out of NH3 and N2 which will have a) larger value of ‘a’ b)larger value of ‘ b’ .Explain.

Last Answer : Ans. a) NH3 will have larger value of a because of H – bonding. b) NH3 will have larger value of b due to larger molecular size.

Description : Use the information and data given below to answer the questions Stronger intermolecular forces result in higher boiling point Strength of London forces increases with the number of electrons in the molecule ... here? (c) Why is the boiling point of HF highest while that of HCl lowest?

Last Answer : Ans :( a) In the molecules HCl, HBr and HI, dipole-dipole interaction and London forces are present. (b) Dipole moment of HCl > HBr > HI but boiling point of HCl < HBr

Description : Why is the PH of blood remains almost constant?

Last Answer : Ans: Blood is a buffer solution and resist the change in PH

Description : How much is the percentage ionization of an electrolyte to classified is as 'weak electrolyte'?

Last Answer : Ans:

Description : What is the molarity of pure water?

Last Answer : Ans: 55.5M

Description : What type of substances are generally called 'electrolyte'?

Last Answer : Ans: Acid, bases and salts

Description : Write the effect of temperature on Equilibrium constant.

Last Answer : Ans. The value of Equilibrium constant changes with the temperature. The increase in rate depends upon activation energy .As the activation energy are different for forward & backward direction .So temperature will ... & backward direction. As K= Kf/ Kb ,so the state of equilibrium will be altered.

Description : What will be the effect on equilibrium if (i) a catalyst is added to it (ii) An inert gas is added at constant volume

Last Answer : Ans. (i) The state of equilibrium is not disturbed on adding catalyst rather it is attained quickly. (ii) No effect on state of equilibrium

Description : Applying Le- Chatelier's principle, predict the effect of temperature and pressure on evaporation of water.

Last Answer : Ans Evaporation of water can be represented as water + heat water vapours: i) With increase in pressure- the equilibrium tend to shift in direction where there is decrease in the vol. i.e. ... left. ii) with increase in temperature- the equilibrium shifts to right as it is an endothermic reaction.

Description : Write the significance of equilibrium constant?

Last Answer : Ans.The numerical value of equilibrium constant is a measure of the extent to which the reactants have been converted into products. A large value of K indicates large amount of ... its low value indicates less amount of reactants converted into products before achieving the equilibrium state.

Description : What are the conditions for getting maximum yield of NH3 by Haber’s process?

Last Answer : Ans. High conc. Of N2 &H2, Low Temp. & High Pressure.

Description : What happens to the dissociation of PCl5 in a closed vessel if He gas is introduced into it at the same temperature?

Last Answer : Ans. No effect.

Description : if the equilibrium constant for the reaction is 4.0, what will be the equilibrium constant for the reverse reaction.

Last Answer : Ans. Kc=1/4

Description : Which measurable property become constant in Water Water vapors equilibrium at constant temperature

Last Answer : Ans. Vapour pressure.

Description : what do you mean by homogenous and heterogeneous equilibrium?

Last Answer : Ans. Homogenous;-It is that equilibrium reaction in which all the reactants and the products are in the same phase. Heterogeneous equilibrium: - It is that equilibrium reaction in which all the reactants and the products are in two or more phases

Description : Write Application of Equilibrium constant?

Last Answer : Ans. (i) To predict the extent of the reaction. (ii) To predict the direction of the reaction. (iii) To calculate the equilibrium concentration.

Description : Write characteristics of Chemical equilibrium.

Last Answer : Ans. (i) At equilibrium the rate of forward reaction becomes equal to rate of backward reaction. (ii) A chemical equilibrium established only if none of the products are allowed to escape out ... can be attained from either direction. (iv) Catalyst does not alter the state of equilibrium.

Description : What will be the value of K ,If reaction is reversed?

Last Answer : Ans. The value of K will get inversed.

Description : what is Equilibrium?

Last Answer : Ans : Equilibrium represents the state of process in which properties such as temperature, pressure ,concentration of the system do not show any change with the passage of time. OR The state in which rate of forward reaction becomes equal to the rate of backward reaction.

Description : Explain Hess’s law.

Last Answer : Ans. It states that the enthalpy change of the reaction remains the same whether the reaction is carried out in one step or several steps, i.e., ∆H = ∆H1 + ∆H2 + ∆H3 +…………

Description : We are consuming a lot of electrical energy, solar energy etc Do you, therefore, conclude that energy of the universe is continuously decreasing? Explain. Which other thermodynamic quantity is continuously increasing or decreasing?

Last Answer : Ans. No, energy of the universe remains constant (law of conservation of energy). Entropy of the universe is continuously increasing.

Description : Water can be lifted into the water tanks at the top of the house with the help of a pump. Then why is not considered to be spontaneous?

Last Answer : Ans. A spontaneous process should continue taking place by itself after initiation . But this is not so in the given case because water will go up so long as the pump is working.

Description : Is the bond energy of all the four C-H bonds in CH4 molecule equal? If not then why ? How is C-H bond energy then reported?

Last Answer : Ans. No because after breaking of C-H bonds one by one, the electronic environments change. The reported value is the average of of the bond dissociation energies of the four C-H bonds.

Description : What is the value of ∆G where ice and water are in equilibrium?

Last Answer : Ans. ∆G=0

Description : Which have more entropy real crystal or ideal crystal and why?

Last Answer : Ans. Real crystal has more entropy because it has more disorderness.

Description : Predict the sign of ∆S for (a) the process of evaporation (b) the process of freezing.

Last Answer : Ans. (a) ∆S =+ve (b) ∆S=-ve

Description : Two ideal gases under same pressure and temperature are allowed to mix in an isolated system. What will be the sign of entropy change?

Last Answer : Ans. Entropy change (∆S) is positive. It is because disorder or degree of freedom increases on mixing.

Description : When ΔH>0 and ΔS< 0, reaction is never spontaneous. Explain.

Last Answer : Ans. When ΔH > 0 , energy factor opposes the reaction . When ΔS< 0, i.e. randomness decreases, this factor also opposes the process. As both factors oppose the process, reaction is never spontaneous.

Description : Under what condition, the heat evolved or absorbed in a reaction is equal to its free energy change?

Last Answer : Ans. As ΔG = ΔH – TΔS. Thus, ΔG = ΔH only when either the reaction is carried out at 0^0 K or the reaction is not accompanied by any entropy change, i.e., ΔS = 0

Description : Predict the entropy change in- (i) A liquid crystallizes into solid (ii) Temperature of a crystalline solid raised from 0K to 115K.

Last Answer : Ans. (i) Entropy decreases because molecules attain an ordered state. (ii) Entropy increases because from 0K to 115K average kinetic of moleculesincreases.