Which unit converts user data into machine readable form? A) Input unit B) Output unit C) ALU D) Control Unit

1 Answer

Answer :

Answer : A

Related questions

Description : Which converts the user data into machine readable form? A) input unit, output unit, control unit B) central processing unit C) output unit D) decoder unit

Last Answer : Answer : A

Description : Which unit converts computer data into human readable form? A) Input unit B) Output unit C) ALU D) Control Unit

Last Answer : Answer : B

Description : Which of the following is not a function of the Input Unit? a) It reads instructions and data from the outside world. b) It converts the data into computer acceptable format. c) It ... into user understandable format. d) It supplies the data and instructions to the computer for further processing.

Last Answer : Answer: c Explanation: The input unit converts the data into computer understandable format i.e. binary format and not the user understandable format. It is the duty of the output unit to make the data into user understandable format

Description : Label the parts 1 and 2: a) 1.ALU 2. MU b) 1.Output unit 2.Input Unit c) 1.MU 2. ALU d) 1.Input Unit 2.Output Unit

Last Answer : Answer: d Explanation: The above diagram is a simple explanation which describes how the instruction is given to the CPU, how it is processed, and then how the result is obtained. So here ... to the user This set of Computer Fundamentals Interview Questions and Answers focuses on The Output Unit

Description : Which unit is responsible for converting the data received from the user into computer understandable format? a) Memory Unit b) Arithmetic & Logic Unit c) Input Unit d) Output Unit

Last Answer : Answer: c Explanation: The Input Unit converts the data, which the user enters into a language which the computer understands, i.e. it converts the data into binary format. The ... after immediate results of processing whereas; the ALU is responsible for various arithmetic and bitwise operations

Description : Which are contains one or more register that may be referenced by machine instruction: a. Input b. Output c. CPU d. ALU

Last Answer : c. CPU

Description : A micropocessor consists of: a) Arithmetic Logic Unit (ALU) b) Memories c) Input / Output devices d) All the above

Last Answer : Ans: A

Description : The main function of the ALU is: a) Store Data and Information for Future Use b) Perform arithmetic and logical operations c) Control Computer Output, such as Printing d) None of These

Last Answer : b) Perform arithmetic and logical operations

Description : The main function of the ALU is to a) perform arithmetic and logical operations b) store data and information for future use c) control computer output, such as printing d) monitor all computer activities e) None of these

Last Answer : a) perform arithmetic and logical operations

Description : The part of the CPU that accesses and decodes programme instructions, and coordinates the flow of data among various system components is the a) ALU b) Control unit c) Megabertz d) Motherboard e) None of these

Last Answer : b) Control unit

Description : The output unit coverts the data entered by the user into computer understandable form. a) True b) False

Last Answer : Answer: b Explanation: The Output unit is responsible for converting the computer obtained data into user understandable format. The Input Unit is responsible for converting the data in computer understandable format

Description : The ALU gives the output of the operations and the output is stored in the ________ a) Memory Devices b) Registers c) Flags d) Output Unit

Last Answer : Answer: b Explanation: Any output generated by the ALU gets stored in the registers. The registers are the temporary memory locations within the processor that are connected by signal paths to the CPU

Description : Hardware includes a) all devices used to input data into a computer b) sets of instructions that a computer runs or executes c) the computer and all the devices connected to it that ... involved in processing information including the central processing unit, memory and storage e) None of these

Last Answer : c) the computer and all the devices connected to it that are used to input and output data

Description : Which of the following is not a function of the Output Unit? a) It produces results that can be easily understood by the user b) It accepts the results produced by the computer c) It ... instructions to the outside world d) It supplies the data and instructions to the computer for further processing

Last Answer : Answer: d Explanation: The output unit is responsible for giving the results to the user in the form of printed report or visual display. It is not responsible for giving the instructions back to the CPU for processing

Description : We use the output of the requirement analysis, the requirement specification as the input for writing :- a) User Acceptance Test Cases b) Integration Level Test Cases c) Unit Level Test Cases d) Program specifications

Last Answer : a) User Acceptance Test Cases

Description : Central Processing Unit is combination of A) Control and storage B) Control and output unit C) Arithmetic logic and input unit D) Arithmetic logic and control unit

Last Answer : Answer : D

Description : Computer system comprises of major units A) input unit, output unit, control unit B) input unit, output unit, control unit and storage C) input unit, output unit, central processing unit and storage unit D) input, output and storage units

Last Answer : Answer : C

Description : Memory unit is one part of A) Input device B) Control unit C) Output device D) Central Processing Unit

Last Answer : Answer : D

Description : The central processing unit (CPU) consists of A) Input, output and processing B) Control unit, primary storage, and secondary storage C) Control unit, arithmetic-logic unit and primary storage D) Control unit, processing, and primary storage

Last Answer : Answer : C

Description : Memory Unit is a part of _______: a) Input Device b) Control Unit c) Output Device d) Processing Unit e) None of The Above

Last Answer : b) Control Unit

Description : Memory Unit is one part of- 1) Control Unit 2) Central Processing Unit 3) Output Device 4) Input device

Last Answer : 2) Central Processing Unit

Description : Which of the following are the two main components of the CPU? A) Control Unit and Registers B) Registers and Main Memory C) Control unit and ALU D) ALU and bus

Last Answer : Answer : C

Description : Which part of the computer is used for calculating and comparing? A) Disk unit B) Control unit C) ALU D) Modem

Last Answer : Answer : C

Description : A set of information that defines the status of resources allocated to a process is A) Process control B) ALU C) Register Unit D) Process description

Last Answer : Answer : D

Description : The brain of any computer system is A) ALU B) Memory C) CPU D) Control unit

Last Answer : Answer : C

Description : ALU and Control Unit have special purpose locations called _______ (A) Registers (B) Mother Board (C) Sockets (D) None of the Above

Last Answer : (A) Registers

Description : Which of the following is correct: a) ALU - Arithmetic Logic Unit b) CU - Control Unit c) CPU - Central Processing Unit d) All of Above e) None of These

Last Answer : d) All of Above

Description : Which part of the computer is used for calculating and comparing? a) ALU b) Control unit c) Disk unit d) Modem e) None of these

Last Answer : a) ALU

Description : Processors contain a control unit and a/an: (1) Expansion slot (2) Port (3) Arithmetic logic unit (ALU) (4) CD drive

Last Answer : Arithmetic logic unit (ALU)

Description : The section of the CPU that selects, interprects and monitors the execution of program instructions is (1) Memory (2) Register (3) Control unit (4) ALU

Last Answer : Control unit

Description : Which unit holds data permanently? A) Input unit B) Secondary storage unit C) Output Unit D) Primary Memory Unit

Last Answer : Answer : B

Description : Which unit holds data temporarily? A) Input unit B) Secondary storage unit C) Output Unit D) Primary Memory Unit

Last Answer : Answer : D

Description : Saving data and instructions to make them readily available is the job of __________ a) Storage Unit b) Cache Unit c) Input Unit d) Output Unit

Last Answer : Answer: a Explanation: The storage unit is responsible for storing the data. It makes the instructions readily available for additional or initial processing whenever required. The cache is a software ... to serve the data requests in future. It can contain the result of some earlier computations

Description : The computer or system peripherals that receives data from processing unit are called ___________ A. Input Devices B. Output Devices C. Both (A) and (B) D. None of the Above

Last Answer : B. Output Devices

Description : where are programs and data to be used by the computer available? 1) Output 2) Processing unit 3) Input 4) Storage

Last Answer : 4) Storage

Description : Where are programs and data to be used by the computer available? (1) Processing Unit (2) Output (3) Storage (4) Input

Last Answer : Storage

Description : How many ALU(s) is/are control by one control unit is SIMD (single instruction stream, multiple data stream) architecture? a) one or more ALUs b) One ALU c) Only two ALU d) Impossible to say

Last Answer : a) one or more ALUs

Description : _______ is an input device that converts analog information into digital form. A. Plotter B. Track Ball C. Light Pen D. Digitizer

Last Answer : D. Digitizer

Description : Which device can produce the final product of machine processing into a form usable by humans: a) Storage b) Input Device c) Output Device d) None of The Above

Last Answer : c) Output Device

Description : Transformation of input into output is performed by? 1) Peripherals 2) Memory 3) Storage 4) The Input-Output unit 5) The CPU

Last Answer : Answer :5

Description : The control unit of a microprocessor A) Stores data in the memory B) Accepts input data from keyboard C) Performs arithmetic/logic function D) None of above

Last Answer : Answer : D

Description : What do you call the translator which takes assembly language program as input & produce machine language code as output? A) Compiler B) Interpreter C) Debugger D) Assembler

Last Answer : Answer : D

Description : 11. _________ devices convert human understandable data and programs into a form that the computer can process. a) Printing b) Output c) Solid state d) Input e) None of these

Last Answer : d) Input

Description : The full form of ALU is A) Arithmetic Logic Unit B) Array Logic Unit C) Application Logic Unit D) None of above

Last Answer : Answer : A

Description : What is the full form of ALU ? (1) Alternative Logic Unit (2) Arithmetic Logic Unit (3) Arithmetic Least Unit (4) Arithmetic Local Unit

Last Answer : Arithmetic Logic Unit

Description : Codes consisting of lines of varying widths or lengths that are computer - readable are known as _______: a) an ASCII code b) a magnetic tape c) an OCR scanner d) a bar code e) None of The Above

Last Answer : d) a bar code

Description : Computer programs are written in a high level programming language, however, the human readable version of a program is called a) cache b) instruction set c) source code d) word size

Last Answer : c) source code

Description : Codes consisting or Bars or lines of varying widths or lengths that are computer-readable are known as- 1) A bar code 2) An ASCII Code 3) A Magnetic Tape 4) A Light Pen

Last Answer : 1) A bar code

Description : . IRC stands for a. Internet Rules Chat b. Internet Relay Chat c. Internet Ready Chat d. Internet Readable chat

Last Answer : b. Internet Relay Chat

Description : A computer program that converts an entire program into machine language is called a/an A) Interpreter B) Simulator C) Compiler D) Commander

Last Answer : Answer : C