What is the result of the expression (1&2)+(3/4) ? (A) 1 (B) 2 (C) 3 (D) 0

What is the result of the expression (1&2)+(3/4) ? (A) 1 (B) 2 (C) 3 (D) 0
by

1 Answer

Answer :

(D) 0
by

Related questions

If m and n are int type variables, what will be the result of the expression m% n when m=5 and n=2 ? A) 0 B) 1 C) 2 D) None of the above

Description : If m and n are int type variables, what will be the result of the expression m% n when m=5 and n=2 ? A) 0 B) 1 C) 2 D) None of the above

Last Answer : B) 1

Please solve Figure 1&2 just by KVL and also requesting to solve Fig-3 & 4 also.

Description : I am a new student of electrical and electronic engineering, and facing some problems on sign related, kvl as well as mesh current analysis. By getting solution of these problems, I may get rid of these ... For figure 4, please just write the seven mesh equations only, solution is not needed.

Last Answer : u can assume the direction of current either in clockwise or anticlockwise...but the solution will remain same in both cases

A Boolean operator Ө is defined as follows: 1Ө1=1, 1Ө0=0, 0Ө1=0 and 0Ө0=1 What will be the truth value of the expression (xӨy)Өz = xӨ(yӨz)? (A) Always false (B) Always true (C) Sometimes true (D) True when x, y, z are all true

Description : A Boolean operator Ө is defined as follows: 1Ө1=1, 1Ө0=0, 0Ө1=0 and 0Ө0=1 What will be the truth value of the expression (xӨy)Өz = xӨ(yӨz)? (A) Always false (B) Always true (C) Sometimes true (D) True when x, y, z are all true

Last Answer : (B) Always true

The regular expression corresponding to the language L where L={x∈{0,1}* | x ends with 1 and does not contain substring 00 } is: (A) (1 + 01)* (10 + 01) (B) (1 + 01)* 01 (C) (1 + 01)* (1 + 01) (D) (10 + 01)* 01

Description : The regular expression corresponding to the language L where L={x∈{0,1}* | x ends with 1 and does not contain substring 00 } is: (A) (1 + 01)* (10 + 01) (B) (1 + 01)* 01 (C) (1 + 01)* (1 + 01) (D) (10 + 01)* 01

Last Answer : (C) (1 + 01)* (1 + 01) 

Let L be the language generated by regular expression 0*10* and accepted by the deterministic finite automata M. Consider the relation RM defined by M. As all states are reachable from the start state, RM has ................ equivalence classes. (A) 2 (B) 4 (C) 5 (D) 6

Description : Let L be the language generated by regular expression 0*10* and accepted by the deterministic finite automata M. Consider the relation RM defined by M. As all states are reachable from the start state, RM has ................ equivalence classes. (A) 2 (B) 4 (C) 5 (D) 6

Last Answer : (D) 6

The number of strings of length 4 that are generated by the regular expression (0|∈) 1+2* (3|∈), where | is an alternation character, {+, *} are quantification characters, and ∈ is the null string, is: (A) 08 (B) 10 (C) 11 (D) 12

Description : The number of strings of length 4 that are generated by the regular expression (0|∈) 1+2* (3|∈), where | is an alternation character, {+, *} are quantification characters, and ∈ is the null string, is: (A) 08 (B) 10 (C) 11 (D) 12

Last Answer : (D) 12

The number of strings of length 4 that are generated by the regular expression (0+1 +|2+3 + )*, where | is an alternation character and {+, *} are quantification characters, is: (A) 08 (B) 09 (C) 10 (D) 12

Description : The number of strings of length 4 that are generated by the regular expression (0+1 +|2+3 + )*, where | is an alternation character and {+, *} are quantification characters, is: (A) 08 (B) 09 (C) 10 (D) 12

Last Answer : (C) 10

A computer program selects an integer in the set {k : 1 ≤ k ≤ 10,00,000} at random and prints out the result. This process is repeated 1 million times. What is the probability that the value k = 1 appears in the printout atleast once ? (A) 0.5 (B) 0.704 (C) 0.632121 (D) 0.68

Description : A computer program selects an integer in the set {k : 1 ≤ k ≤ 10,00,000} at random and prints out the result. This process is repeated 1 million times. What is the probability that the value k = 1 appears in the printout atleast once ? (A) 0.5 (B) 0.704 (C) 0.632121 (D) 0.68

Last Answer : (C) 0.632121

Which of the following control expressions are valid for an if statement? A) An integer expression B) A Boolean expression C) Either A or B D) Neither A nor B

Description : Which of the following control expressions are valid for an if statement? A) An integer expression B) A Boolean expression C) Either A or B D) Neither A nor B

Last Answer : B) A Boolean expression

Which of the following control expressions are valid for an if statement? A) An integer expression B) A Boolean expression C) Either A or B D) Neither A nor B

Description : Which of the following control expressions are valid for an if statement? A) An integer expression B) A Boolean expression C) Either A or B D) Neither A nor B

Last Answer : B) A Boolean expression

By using ................... you can force immediate termination of a loop, by passing the conditional expression and any remaining code in the body of the loop. A) Break B) Continue C) Terminate D) Loop Close

Description : By using ................... you can force immediate termination of a loop, by passing the conditional expression and any remaining code in the body of the loop. A) Break B) Continue C) Terminate D) Loop Close

Last Answer : A) Break

The ....................... looks only for a match between the value of the expression and one of its case constants. A) if B) match C) switch D) None of the above

Description : The ....................... looks only for a match between the value of the expression and one of its case constants. A) if B) match C) switch D) None of the above

Last Answer : C) switch

In java, ............. can only test for equality, where as ............ can evaluate any type of the Boolean expression. A) switch, if B) if, switch C) if, break D) continue, if

Description : In java, ............. can only test for equality, where as ............ can evaluate any type of the Boolean expression. A) switch, if B) if, switch C) if, break D) continue, if

Last Answer : A) switch, if

When the operators are having the same priority, they are evaluated from ................. ............. in the order they appear in the expression. A) right to left B) left to right C) any of the order D) depends on compiler

Description : When the operators are having the same priority, they are evaluated from ................. ............. in the order they appear in the expression. A) right to left B) left to right C) any of the order D) depends on compiler

Last Answer : B) left to right

Which of the following control expressions are valid for an if statement? A) an integer expression B) a Boolean expression C) either A or B D) Neither A nor B

Description : Which of the following control expressions are valid for an if statement? A) an integer expression B) a Boolean expression C) either A or B D) Neither A nor B

Last Answer : B) a Boolean expression

The expression x=4+2 % -8 evaluates to A) -6 B) 6 C) 4 D) None of the above

Description : The expression x=4+2 % -8 evaluates to A) -6 B) 6 C) 4 D) None of the above

Last Answer : B) 6

Which of the following is a legal expression in SQL? (A) SELECT NULL FROM EMPLOYEE; (B) SELECT NAME FROM EMPLOYEE; (C) SELECT NAME FROM EMPLOYEE WHERE SALARY = NULL; (D) None of the above

Description : Which of the following is a legal expression in SQL? (A) SELECT NULL FROM EMPLOYEE; (B) SELECT NAME FROM EMPLOYEE; (C) SELECT NAME FROM EMPLOYEE WHERE SALARY = NULL; (D) None of the above

Last Answer : B) SELECT NAME FROM EMPLOYEE;

Suppose d = {“john”:40, “peter”:45}, what happens when we try to retrieve a value using the expression d[“susan”]? a) Since “susan” is not a value in the set, Python raises a KeyError exception b) It is executed fine and no exception is raised, and it returns None c) Since “susan” is not a key in the set, Python raises a KeyError exception d) Since “susan” is not a key in the set, Python raises a syntax error

Description : Suppose d = { john :40, peter :45}, what happens when we try to retrieve a value using the expression d[ susan ]? a) Since susan is not a value in the set, Python raises a KeyError ... Python raises a KeyError exception d) Since susan is not a key in the set, Python raises a syntax error

Last Answer : c) Since “susan” is not a key in the set, Python raises a KeyError exception

The value of postfix expression: 8 3 4 + - 3 8 2 / + * 2 $ 3+ is (A) 17 (B) 131 (C) 64 (D) 52

Description : The value of postfix expression: 8 3 4 + - 3 8 2 / + * 2 $ 3+ is (A) 17 (B) 131 (C) 64 (D) 52

Last Answer : (D) 52

Given L1 = L(a*baa*) and L2 = L(ab*) The regular expression corresponding to language L3 = L1/L2 (right quotient) is given by (A) a*b (B) a*baa* (C) a*ba* (D) None of the above

Description : Given L1 = L(a*baa*) and L2 = L(ab*) The regular expression corresponding to language L3 = L1/L2 (right quotient) is given by (A) a*b (B) a*baa* (C) a*ba* (D) None of the above

Last Answer : (C) a*ba* 

The dual of a Boolean expression is obtained by interchanging (A) Boolean sums and Boolean products (B) Boolean sums and Boolean products or interchanging 0's and 1's (C) Boolean sums and Boolean products and interchanging 0's & 1's (D) Interchanging 0's and 1's

Description : The dual of a Boolean expression is obtained by interchanging (A) Boolean sums and Boolean products (B) Boolean sums and Boolean products or interchanging 0's and 1's (C) Boolean sums and Boolean products and interchanging 0's & 1's (D) Interchanging 0's and 1's

Last Answer : (C) Boolean sums and Boolean products and interchanging 0's & 1's

What is the value of the postfix expression ? a b c d + - * (where a = 8, b = 4, c = 2 and d = 5) (A) -3/8 (B) -8/3 (C) 24 (D) -24

Description : What is the value of the postfix expression ? a b c d + - * (where a = 8, b = 4, c = 2 and d = 5) (A) -3/8 (B) -8/3 (C) 24 (D) -24

Last Answer : (D) -24

The reverse polish notation equivalent to the infix expression ((A + B) * C + D)/(E + F + G) (A) A B + C * D + EF + G + / (B) A B + C D * + E F + G + / (C) A B + C * D + E F G + +/ (D) A B + C * D + E + F G + /

Description : The reverse polish notation equivalent to the infix expression ((A + B) * C + D)/(E + F + G) (A) A B + C * D + EF + G + / (B) A B + C D * + E F + G + / (C) A B + C * D + E F G + +/ (D) A B + C * D + E + F G + /

Last Answer : (A) A B + C * D + EF + G + /

Convert the following infix expression into its equivalent post fix expression (A + B^ D) / (E – F) + G (A) ABD^ + EF – / G+ (B) ABD + ^EF – / G+ (C) ABD + ^EF / – G+ (D) ABD^ + EF / – G+

Description : Convert the following infix expression into its equivalent post fix expression (A + B^ D) / (E – F) + G (A) ABD^ + EF – / G+ (B) ABD + ^EF – / G+ (C) ABD + ^EF / – G+ (D) ABD^ + EF / – G+

Last Answer : (A + B^ D) / (E – F) + G

What does the following expression means ? char *(*(* a[N]) ( )) ( ); (A) a pointer to a function returning array of n pointers to function returning character pointers. (B) a function return array of N pointers to functions returning pointers to characters (C) an array of n pointers to function returning pointers to characters (D) an array of n pointers to function returning pointers to functions returning pointers to characters.

Description : What does the following expression means ? char *(*(* a[N]) ( )) ( ); (A) a pointer to a function returning array of n pointers to function returning character pointers. (B) a ... to characters (D) an array of n pointers to function returning pointers to functions returning pointers to characters.

Last Answer : Answer: A,B,C,D

Consider the following statements : (a) Boolean expressions and logic networks correspond to labelled acyclic digraphs. (b) Optimal Boolean expressions may not correspond to simplest networks. (c) Choosing essential blocks first in a Karnaugh map and then greedily choosing the largest remaining blocks to cover may not give an optimal expression. Which of these statement(s) is/ are correct? (A) (a) only (B) (b) only (C) (a) and (b) (D) (a), (b) and (c)

Description : Consider the following statements : (a) Boolean expressions and logic networks correspond to labelled acyclic digraphs. (b) Optimal Boolean expressions may not correspond to simplest networks. (c) Choosing essential blocks first in a Karnaugh map ... (b) only (C) (a) and (b) (D) (a), (b) and (c)

Last Answer : (D) (a), (b) and (c) 

A horn clause is ...................... (A) A clause in which no variables occur in the expression (B) A clause that has at least one negative literal (C) A disjunction of a number of literals (D) A clause that has at most one positive literal

Description : A horn clause is ...................... (A) A clause in which no variables occur in the expression (B) A clause that has at least one negative literal (C) A disjunction of a number of literals (D) A clause that has at most one positive literal

Last Answer : (D) A clause that has at most one positive literal 

The regular expression for the complement of the language L = {anbm|n≥4, m≤3} is: (A) (λ + a + aa + aaa)b* + a*bbbb* + (a + b)*ba(a + b)* (B) (λ + a + aa + aaa)b* + a*bbbbb* + (a + b)*ab(a + b)* (C) (λ + a + aa + aaa) + a*bbbbb* + (a + b)*ab(a + b)* (D) (λ + a + aa + aaa)b* + a*bbbbb* + (a + b)*ba(a + b)*

Description : The regular expression for the complement of the language L = {anbm|n≥4, m≤3} is: (A) (λ + a + aa + aaa)b* + a*bbbb* + (a + b)*ba(a + b)* (B) (λ + a + aa + aaa)b* + a*bbbbb* + (a + b)*ab(a + b)* (C) (λ + a ... *bbbbb* + (a + b)*ab(a + b)* (D) (λ + a + aa + aaa)b* + a*bbbbb* + (a + b)*ba(a + b)*

Last Answer : (D) (λ + a + aa + aaa)b* + a*bbbbb* + (a + b)*ba(a + b)*

In how many ways can the string A ∩ B - A ∩ B - A be fully parenthesized to yield an infix expression? (A) 15 (B) 14 (C) 13 (D) 12

Description : In how many ways can the string A ∩ B - A ∩ B - A be fully parenthesized to yield an infix expression? (A) 15 (B) 14 (C) 13 (D) 12

Last Answer : (B) 14

Which of the following is not an inherent application of stack? (A) Implementation of Stack (B) Evaluation of a postfix expression (C) Job Scheduling (D) Reverse a string

Description : Which of the following is not an inherent application of stack? (A) Implementation of Stack (B) Evaluation of a postfix expression (C) Job Scheduling (D) Reverse a string

Last Answer : (C) Job Scheduling

Given the following prefix expression: * + 3 + 3 ↑ 3 + 3 3 3 What is the value of the prefix expression? (A) 2178 (B) 2199 (C) 2205 (D) 2232

Description : Given the following prefix expression: * + 3 + 3 ↑ 3 + 3 3 3 What is the value of the prefix expression? (A) 2178 (B) 2199 (C) 2205 (D) 2232

Last Answer : (C) 2205

Let us assume that you construct ordered tree to represent the compound proposition (~(p˄q))↔(~p˅~q). Then, the prefix expression and post-fix expression determined using this ordered tree are given as ........... and ............. respectively. (A) ↔~˄pq˅ ~~pq, pq˄~p~q~˅↔ (B) ↔~˄pq˅ ~p~q, pq˄~p~q~˅↔ (C) ↔~˄pq˅ ~~pq, pq˄~p~ ~q˅↔ (D) ↔~˄pq˅ ~p~q, pq˄~p~~q˅↔

Description : Let us assume that you construct ordered tree to represent the compound proposition (~(p˄q))↔(~p˅~q). Then, the prefix expression and post-fix expression determined using this ordered tree are given as ........... and .......... ... ~p~q~˅↔ (C) ↔~˄pq˅ ~~pq, pq˄~p~ ~q˅↔ (D) ↔~˄pq˅ ~p~q, pq˄~p~~q˅↔

Last Answer : (B) ↔~˄pq˅ ~p~q, pq˄~p~q~˅↔

Which of the following strings would match the regular expression: p+[3-5]*[xyz]? I. p443y Il. p6y III. 3xyz IV. p35z V. p353535x Vl. ppp5 (1) I, III and Vl only (2) IV, V and VI only (3) II, IV and V only (4) I, IV and V only

Description : Which of the following strings would match the regular expression: p+[3-5]*[xyz]? I. p443y Il. p6y III. 3xyz IV. p35z V. p353535x Vl. ppp5 (1) I, III and Vl only (2) IV, V and VI only (3) II, IV and V only (4) I, IV and V only

Last Answer : Answer: 4

................ allows individual row operation to be performed on a given result set or on the generated by a selected by a selected statement. A) Procedure B) Trigger C) Curser D) None of above

Description : ................ allows individual row operation to be performed on a given result set or on the generated by a selected by a selected statement. A) Procedure B) Trigger C) Curser D) None of above

Last Answer : C) Curser

Which of the following is not the function of client? A) Compile queries B) Query optimization C) Receive queries D) Result formatting and presentation

Description : Which of the following is not the function of client? A) Compile queries B) Query optimization C) Receive queries D) Result formatting and presentation

Last Answer : B) Query optimization

……………… clause is an additional filter that is applied to the result. A) Select B) Group-by C) Having D) Order by

Description : ……………… clause is an additional filter that is applied to the result. A) Select B) Group-by C) Having D) Order by

Last Answer : C) Having

Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue may be complex structures that are ordered on one or several fields. Which of the following is correct? (A) Both S1 and S2 are incorrect. (B) S1 is correct and S2 is incorrect. (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Description : Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue ... . (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Last Answer : (D) Both S1 and S2 are correct.

Consider the following three SQL queries (Assume the data in the people table) : (a) Select Name from people where Age>21; (b) Select Name from people where Height>180; (c) Select Name from people where (Age>21) or (Height>180); If the SQL queries (a) and (b) above, return 10 rows and 7 rows in the result set respectively, then what is one possible number of rows returned by the SQL query (c) ? (A) 3 (B) 7 (C) 10 (D) 21

Description : Consider the following three SQL queries (Assume the data in the people table) : (a) Select Name from people where Age>21; (b) Select Name from people where Height>180; (c) Select Name from people where (Age>21) or (Height ... number of rows returned by the SQL query (c) ? (A) 3 (B) 7 (C) 10 (D) 21

Last Answer : (C) 10

Suppose ORACLE relation R(A, B) currently has tuples {(1, 2), (1, 3), (3, 4)} and relation S(B, C) currently has {(2, 5), (4, 6), (7, 8)}. Consider the following two SQL queries SQ1 and SQ2 : SQ1 : Select * From R Full Join S On R.B=S.B; SQ2 : Select * From R Inner Join S On R.B=S.B; The numbers of tuples in the result of the SQL query SQ1 and the SQL query SQ2 are given by : (A) 2 and 6 respectively (B) 6 and 2 respectively (C) 2 and 4 respectively (D) 4 and 2 respectively

Description : Suppose ORACLE relation R(A, B) currently has tuples {(1, 2), (1, 3), (3, 4)} and relation S(B, C) currently has {(2, 5), (4, 6), (7, 8)}. Consider the following two SQL queries SQ1 and SQ2 ... (A) 2 and 6 respectively (B) 6 and 2 respectively (C) 2 and 4 respectively (D) 4 and 2 respectively

Last Answer : (D) 4 and 2 respectively

What is the function of following UNIX command? WC – l<a >b& (A) It runs the word count program to count the number of lines in its input, a, writing the result to b, as a foreground process. (B) It runs the word count program to count the number of lines in its input, a, writing the result to b, but does it in the background. (C) It counts the errors during the execution of a process, a, and puts the result in process b. (D) It copies the ‘ l ’ numbers of lines of program from file, a, and stores in file b.

Description : What is the function of following UNIX command? WC - lb& (A) It runs the word count program to count the number of lines in its input, a, writing the result to b, as a foreground process. (B) It runs ... (D) It copies the l ' numbers of lines of program from file, a, and stores in file b.

Last Answer : (B) It runs the word count program to count the number of lines in its input, a, writing the result to b, but does it in the background.

Software safety is quality assurance activity that focuses on hazards that (A) affect the reliability of a software component (B) may cause an entire system to fail. (C) may result from user input errors. (D) prevent profitable marketing of the final product

Description : Software safety is quality assurance activity that focuses on hazards that (A) affect the reliability of a software component (B) may cause an entire system to fail. (C) may result from user input errors. (D) prevent profitable marketing of the final product

Last Answer : (B) may cause an entire system to fail.

How do you write this expression Raise 2 to the 4th power then subtract v from the result?

Description : How do you write this expression Raise 2 to the 4th power then subtract v from the result?

Last Answer : It is 24 - v

Which command is used to concatenate all files beginning with the string 'emp' and followed by a non-numeric characters? A. cat emp[!0-9] B. more [emp][!0-9] C. cat emp[x-z]

Description : Which command is used to concatenate all files beginning with the string 'emp' and followed by a non-numeric characters? A. cat emp[!0-9] B. more [emp][!0-9] C. cat emp[x-z]

Last Answer : A. cat emp[!0-9]

Unspecified address......................of IPV6 address is equivalent to the IPV4 unspecified address 0.0.0.0. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Description : Unspecified address......................of IPV6 address is equivalent to the IPV4 unspecified address 0.0.0.0. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Last Answer : B) (: : )

Loopback address ....................... of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Description : Loopback address ....................... of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Last Answer : A) (: : 1)

In Java servlet method init( ) is called ..................... times. A) 1 B) 2 C) 0 D) multiple

Description : In Java servlet method init( ) is called ..................... times. A) 1 B) 2 C) 0 D) multiple

Last Answer : A) 1

If a is an integer variable, a=7/3; will return a value A) 2.5 B) 3 C) 0 D) 2

Description : If a is an integer variable, a=7/3; will return a value A) 2.5 B) 3 C) 0 D) 2

Last Answer : D) 2

In a queue, the initial values of front pointer f rare pointer r should be ….. and …….. respectively. A) 0 and 1 B) 0 and -1 C) -1 and 0 D) 1 and 0

Description : In a queue, the initial values of front pointer f rare pointer r should be ….. and …….. respectively. A) 0 and 1 B) 0 and -1 C) -1 and 0 D) 1 and 0

Last Answer : B) 0 and -1

A …………… is an acyclic digraph, which has only one node with indegree 0, and other nodes have indegree 1. A) Directed tree B) Undirected tree C) Dis-joint tree D) Direction oriented tree

Description : A …………… is an acyclic digraph, which has only one node with indegree 0, and other nodes have indegree 1. A) Directed tree B) Undirected tree C) Dis-joint tree D) Direction oriented tree

Last Answer : A) Directed tree