What is the difference between resistance and resistor?

What is the difference between resistance and resistor?
by

1 Answer

Answer :

Resistance is the property of a conductor, which determines thequantity of current that passes through it when a potentialdifference is applied across it.A resistor is a electrical componet with a predeterminedelectrical resistance, like 1 ohm, 10 ohms 100 ohms 10000 ohmsetc..depending on how much current you want to pass through acircuit, you would design the circuit with the requiredresistors
by

Related questions

While performing an experiment to study the dependence of current on the potential difference across two ends of the resistor, a student keeps the circuit closed for a long time to measure the current and potential difference. State how the resistance of the resistor will be affected?

Description : While performing an experiment to study the dependence of current on the potential difference across two ends of the resistor, a student keeps the circuit closed for a long time to measure the current and potential difference. State how the resistance of the resistor will be affected?

Last Answer : Answer. When the circuit is closed for a long time, the flow of current will be in excess which causes unwanted heating in the resistor and changes the value of resistance.

A 20 V battery of internal resistance `1 Omega` is connected to three coils of `12 Omega, 6 Omega` and `4 Omega` in parallel, a resistor of `5Omega` a

Description : A 20 V battery of internal resistance `1 Omega` is connected to three coils of `12 Omega, 6 Omega` and `4 Omega` in parallel, a resistor of `5Omega` a

Last Answer : A 20 V battery of internal resistance `1 Omega` is connected to three coils of `12 ... and the terminal potential difference across each battery.

Three identical cells each of emf 2 V and unknown internal resistance are connected in parallel. This combination is connected to a `5 Omega` resistor

Description : Three identical cells each of emf 2 V and unknown internal resistance are connected in parallel. This combination is connected to a `5 Omega` resistor

Last Answer : Three identical cells each of emf 2 V and unknown internal resistance are connected in parallel. ... what is the internal resistance of each cell ?

Three identical, each of emf 2 V and internal resistance `0.2 Omega` are connected in series to an external resistor of `7.4 Omega`. Calculate the cur

Description : Three identical, each of emf 2 V and internal resistance `0.2 Omega` are connected in series to an external resistor of `7.4 Omega`. Calculate the cur

Last Answer : Three identical, each of emf 2 V and internal resistance `0.2 Omega` are connected in series to ... 7.4 Omega`. Calculate the current in the circuit.

Find the equivealent resistance of the circuit shown in Fig. 4.61 between the points P and Q. Each resistor has a resistance r.

Description : Find the equivealent resistance of the circuit shown in Fig. 4.61 between the points P and Q. Each resistor has a resistance r.

Last Answer : Find the equivealent resistance of the circuit shown in Fig. 4.61 between the points P and Q. Each resistor has a resistance r.

Find the equivalent resistance of the circuit shown in Fig.4.60 between the points A and B. Each resistor has a resistance r.

Description : Find the equivalent resistance of the circuit shown in Fig.4.60 between the points A and B. Each resistor has a resistance r.

Last Answer : Find the equivalent resistance of the circuit shown in Fig.4.60 between the points A and B. Each resistor has a resistance r.

A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega` each. The equivalent resistance is `7 Omega`. Find

Description : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega` each. The equivalent resistance is `7 Omega`. Find

Last Answer : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega ... The equivalent resistance is `7 Omega`. Find n.

The sequence of bands marked on a carbon resistor is yellow , red orange and silver. What is its (a) resistance and (b) tolerance ?

Description : The sequence of bands marked on a carbon resistor is yellow , red orange and silver. What is its (a) resistance and (b) tolerance ?

Last Answer : The sequence of bands marked on a carbon resistor is yellow , red orange and silver. What is its (a) resistance and (b) tolerance ?

Copper and carbon wires are connected in series and the combined resistor is kept at `0^(@)C`. Assuming the combined resistance does not vary with tem

Description : Copper and carbon wires are connected in series and the combined resistor is kept at `0^(@)C`. Assuming the combined resistance does not vary with tem

Last Answer : Copper and carbon wires are connected in series and the combined resistor is kept at `0^(@)C`. Assuming the combined ... C)` A. 4 B. 8 C. 6 D. 2

The equivalent resistance of two resistor connected in series is `6 Omega` and their equivalent resistance is `(4)/(3)Omega`. What are the values of r

Description : The equivalent resistance of two resistor connected in series is `6 Omega` and their equivalent resistance is `(4)/(3)Omega`. What are the values of r

Last Answer : The equivalent resistance of two resistor connected in series is `6 Omega` and their equivalent resistance is `(4 ... , 2 Omega` D. `6 Omega, 2 Omega`

The temperature coefficient of resistance of an alloy used for making resistor is

Description : The temperature coefficient of resistance of an alloy used for making resistor is

Last Answer : The temperature coefficient of resistance of an alloy used for making resistor is A. small and ... C. large and positive D. large and negative

Consider the combination of resistor, The equivalent resistance between a and b is

Description : Consider the combination of resistor, The equivalent resistance between a and b is

Last Answer : Consider the combination of resistor, The equivalent resistance between a and b is A. `(R )/(6)` B. `(2R)/(3)` C. `(R )/(3)` D. `3R`

Each resistor shown in the figure has a resistance of `10 Omega` and the battery has the emf 6 V. What will be the current supplied by the battery ?

Description : Each resistor shown in the figure has a resistance of `10 Omega` and the battery has the emf 6 V. What will be the current supplied by the battery ?

Last Answer : Each resistor shown in the figure has a resistance of `10 Omega` and the battery has the emf 6 V. What will be the ... 2 A` C. `1.8 A` D. `0.3 A`

The resistance of a carbon resistor of colour code Red-Red Green Silver is (in `k Omega`)

Description : The resistance of a carbon resistor of colour code Red-Red Green Silver is (in `k Omega`)

Last Answer : The resistance of a carbon resistor of colour code Red-Red Green Silver is (in `k Omega`) A. `22 00 pm 5%` ... pm 10%` C. `220 pm 10%` D. `220 pm 5%`

Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and if no resistance value is fraction

Description : Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and if no resistance value is fraction

Last Answer : Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and ... in ohm is A. 4 B. 6 C. 8 D. 12

In the circuit shown here, what is the value of the unknown resistor R so that the total resistance of the circuit between points P and Q is also equa

Description : In the circuit shown here, what is the value of the unknown resistor R so that the total resistance of the circuit between points P and Q is also equa

Last Answer : In the circuit shown here, what is the value of the unknown resistor R so that the total resistance of the ... ` C. `sqrt(69)Omega` D. `10 Omega`

A 2 V battery, a `990Omega` resistor and a potentiometer of 2 m length, all are connected in series of the resistance of potentiometer wire is `10Omeg

Description : A 2 V battery, a `990Omega` resistor and a potentiometer of 2 m length, all are connected in series of the resistance of potentiometer wire is `10Omeg

Last Answer : A 2 V battery, a `990Omega` resistor and a potentiometer of 2 m length, all are connected in series of the resistance ... 0.01Vm^(-1)` D. `0.1Vm^(-1)`

What will happen to resistance if you increase the area of the resistor?

Description : What will happen to resistance if you increase the area of the resistor?

Last Answer : I don’t know

What will happen to resistance if you increase the length of the resistor?

Description : What will happen to resistance if you increase the length of the resistor?

Last Answer : It won’t work

In the resistance colour code, the fourth band signifies – (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Description : In the resistance colour code, the fourth band signifies – (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Last Answer : (1) tolerance level Explanation: The first and second band represent the numerical value of the resistor, and the color of the third band specify the power-often multiplier. Reading the resistor from left to right, the fourth band represents the tolerance.

Which of the listed electrical devices is represented by the symbol shown in the illustration? EL-0055 A. Fixed resistance resistor B. Coil with magnetic core C. DC motor or generator shunt field D. Transformer

Description : Which of the listed electrical devices is represented by the symbol shown in the illustration? EL-0055 A. Fixed resistance resistor B. Coil with magnetic core C. DC motor or generator shunt field D. Transformer

Last Answer : Answer: D

When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above

Description : When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above

Last Answer : Answer: C

What power would be consumed by the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Description : What power would be consumed by the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Last Answer : Answer: D

What would be the voltage drop across the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Description : What would be the voltage drop across the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Last Answer : Answer: C

For practical purposes, in a simple series circuit, the source voltage will be dropped across one resistor if it has ______________. A. half the resistance of the other resistor B. a resistance equal to the other C. at least ten times the resistance of the other D. a partial short circuit

Description : For practical purposes, in a simple series circuit, the source voltage will be dropped across one resistor if it has ______________. A. half the resistance of the other resistor B. a resistance equal to the other C. at least ten times the resistance of the other D. a partial short circuit

Last Answer : Answer: C

The resistance value of a resistor in a circuit can best be determined by the _____________. A. single solid body color of the resistor B. band markings on the resistor C. amperage value written on the resistor D. physical size of the resistor

Description : The resistance value of a resistor in a circuit can best be determined by the _____________. A. single solid body color of the resistor B. band markings on the resistor C. amperage value written on the resistor D. physical size of the resistor

Last Answer : Answer: B

Which of the following statements concerning a simple parallel resistance circuit is correct? A. The voltage drop across each resistor is the same. B. The total current flow equals the reciprocal of the sum of the individual currents. C. The total resistance equals the sum of the individual resistances. D. The total voltage equals the sum of the individual voltages across each resistance.

Description : Which of the following statements concerning a simple parallel resistance circuit is correct? A. The voltage drop across each resistor is the same. B. The total current flow equals the reciprocal ... resistances. D. The total voltage equals the sum of the individual voltages across each resistance.

Last Answer : Answer: A

The third color band on a resistor is used to indicate the ______________. A. tolerance of the resistor B. number of zeros following the first two significant figures in the resistance value C. first significant figure of the resistance D. second significant figure of the resistance

Description : The third color band on a resistor is used to indicate the ______________. A. tolerance of the resistor B. number of zeros following the first two significant figures in the resistance value C. first significant figure of the resistance D. second significant figure of the resistance

Last Answer : Answer: B

To carry out an insulation resistance test, one terminal of the megohmmeter should be connected to the winding, with the other terminal being connected to the ____________________. A. power supply B. variable resistor C. frame of the machine D. armature

Description : To carry out an insulation resistance test, one terminal of the megohmmeter should be connected to the winding, with the other terminal being connected to the ____________________. A. power supply B. variable resistor C. frame of the machine D. armature

Last Answer : Answer: C

The arrow drawn through the resistor shown in the illustration indicates that it is _____________. EL-0086 A. for use in low power applications B. a carbon composition type C. a wire-wound type D. one whose resistance is variable

Description : The arrow drawn through the resistor shown in the illustration indicates that it is _____________. EL-0086 A. for use in low power applications B. a carbon composition type C. a wire-wound type D. one whose resistance is variable

Last Answer : Answer: D

An adjustable resistor, whose resistance can be changed without opening the circuit in which it is connected, is called a _____________. A. bleeder resistor B. rheostat C. bridge D. variable shunt strip

Description : An adjustable resistor, whose resistance can be changed without opening the circuit in which it is connected, is called a _____________. A. bleeder resistor B. rheostat C. bridge D. variable shunt strip

Last Answer : Answer: B

Motor controllers are seldom troubled with grounds because _____________. A. the auxiliary contacts have a high resistance connection B. the contactors and relays are mounted on a nonconducting panel C. the resistor banks are composed of individual series-connected units D. there are separate switches for the motor and the control

Description : Motor controllers are seldom troubled with grounds because _____________. A. the auxiliary contacts have a high resistance connection B. the contactors and relays are mounted on a nonconducting panel ... individual series-connected units D. there are separate switches for the motor and the control

Last Answer : Answer: B

A semiconductor that decreases in resistance with an increase in temperature is known as a _____________. A. resistor B. thermistor C. diode D. thermopile

Description : A semiconductor that decreases in resistance with an increase in temperature is known as a _____________. A. resistor B. thermistor C. diode D. thermopile

Last Answer : Answer: B

The square of the thermal noise voltage generated by a resistor is proportional to A. its resistance B. its temperature C. the bandwidth over which it is measured D. All of the above

Description : The square of the thermal noise voltage generated by a resistor is proportional to A. its resistance B. its temperature C. the bandwidth over which it is measured D. All of the above

Last Answer : D. All of the above

The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, respectively. Calculate the equivalent input-noise resistance of this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Description : The first stage of a two-stage amplifier has a voltage gain of 10, a 600 Ω input resistor, a 1600Ω equivalent noise resistance and 27kΩ output resistor. For the second stage, these values are 25, 81kΩ, 19kΩ, and 1MΩ, ... this two stage amplifier. A. 2,518 kΩ B. 2,518 Ω C. 251.8 Ω D. 12,518 Ω

Last Answer : B. 2,518 Ω

Indicate the false statement A. The noise generated in a resistance or the resistive component of any impedance is random. B. Random noise power is proportional to the bandwidth over which is measured C. A random voltage across the resistor does not exist D. All formula referring to random noise are applicable only to the value of such noise.

Description : Indicate the false statement A. The noise generated in a resistance or the resistive component of any impedance is random. B. Random noise power is proportional to the bandwidth over which is measured ... exist D. All formula referring to random noise are applicable only to the value of such noise.

Last Answer : C. A random voltage across the resistor does not exist

What would happen if the base resistor has zero resistance?

Description : What would happen if the base resistor has zero resistance?

Last Answer : If the base resistance is zero, then the base current is very high. Since, we know that the base current is directly proportional to the collector current with the multiplying factor of current ... high. In this time, the transistor operates in saturation region and finally it is being destroyed.

What would happen if the base resistor has zero resistance?

Description : What would happen if the base resistor has zero resistance?

Last Answer : If the base resistance is zero, then the base current is very high. Since, we know that the base current is directly proportional to the collector current with the multiplying factor of current ... high. In this time, the transistor operates in saturation region and finally it is being destroyed.

If current of 20 mA is passing through op-amp and voltage drop across series resistor is 10 V then value of resistance is A. 500Ω B. 400Ω C. 300Ω D. 200Ω

Description : If current of 20 mA is passing through op-amp and voltage drop across series resistor is 10 V then value of resistance is A. 500Ω B. 400Ω C. 300Ω D. 200Ω

Last Answer : 500Ω

A light dependent resistor is made up of A. low resistance semiconductor B. low resistance metaC. high resistance semiconductor D. high resistance metall

Description : A light dependent resistor is made up of A. low resistance semiconductor B. low resistance metal C. high resistance semiconductor D. high resistance metal

Last Answer :  high resistance semiconductor

Why not high resistance for earth fault than using grounding transformer & resistor 0.45 ohms?

Description : Why not high resistance for earth fault than using grounding transformer & resistor 0.45 ohms?

Last Answer : It is mechanically unwide. Difficult to manufacture.  

A carbon resistor has a resistance of 50 ohms, and a tolerance of 5 percent. What are the colors of bands one, two, three, and four, respectively?

Description : A carbon resistor has a resistance of 50 ohms, and a tolerance of 5 percent. What are the colors of bands one, two, three, and four, respectively?

Last Answer : The bands are green, black, black, and gold.

What term identifies a single resistor that represents total resistance of a complex circuit?

Description : What term identifies a single resistor that represents total resistance of a complex circuit?

Last Answer : Equivalent resistor or Req.

Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Description : Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Last Answer : 25 ohms

A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Description : A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Last Answer : 0.1 microfarads 40% from the graph = 0.5

An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Description : An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Last Answer : 50/(50+1k)*100 = 4.76%

Internal resistance is the resistance offered by a. source of e m f b. Conductor c. Resistor d. Capacitor

Description : Internal resistance is the resistance offered by a. source of e m f b. Conductor c. Resistor d. Capacitor

Last Answer : a. source of e m f

When 2,4 and 6 ohms resistor are connected in parallel their resultant equivalent resistance will be A. 12ohm b. 11/12ohm C. 12/11ohm d. None

Description : When 2,4 and 6 ohms resistor are connected in parallel their resultant equivalent resistance will be A. 12ohm b. 11/12ohm C. 12/11ohm d. None

Last Answer : C. 12/11ohm

A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination?

Description : A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination? 

Last Answer : ANSWER: 3 AND 1/3 OHM