1. Diameter of the base of a cone is 10.5 cm and its slant height is 10 cm. Find its curved surface area. 2.Find the total surface area of a cone, if its slant height is 21 m and diameter of its base is 24 m. 3. Curved surface area of a cone is 308 cm2 and its slant height is 14 cm. Find: (i) radius of the base and (ii) total surface area of the cone. 4. A conical tent is 10 m high and the radius of its base is 24 m. Find: (i) slant height of the tent. (ii) cost of the canvas required to make the tent, if the cost of 1 m2 canvas is 40 . 5. What length of tarpaulin 3 m wide will be required to make conical tent of height 8 m and base radius 6 m? Assume that the extra length of material that will be required for stitching margins and wastage in cutting is approximately 20 cm (Use π = 3.14). 6. The slant height and base diameter of a conical tomb are 25 m and 14 m respectively. Find the cost of white washing its curved surface at the rate of 210 per 100 m2 7. A joker’s cap is in the form of a right circular cone of base radius 7 cm and height 24 cm. Find the area of the sheet required to make 10 such caps. 8. A bus stop is barricaded from the remaining part of the road, by using 50 hollow cones made of recycled cardboard. Each cone has a base diameter of 40 cm and height 1 m. If the outer side of each of the cones is to be painted and the cost of painting is ₹12 per m2, what will be the cost of painting all these cones? (Use π = 3.14 and take √1.04= 1.02)