(i) Name an iron and steel plant which was established with British collaboration. -Geography

1 Answer

Answer :

(i) Products made from petrochemicals are growing in popularity because they are cost effective, economically stable and do not depend on agricultural raw material.  (ii) A heavy engineering industry requires huge capital investment because it requires enormous amount of power, good transport facility and heavy bulky raw material which is costly. (iii) The electronics industry contributes to the development of the country because it has largely contributed to space technology, communication, information technology, software industry, medical sciences and defence to develop with electronic apparatus.

Related questions

Description : Name the steel plants that were set up with Russian collaboration. -Geography

Last Answer : Steel plants which were setup with Russian collaboration are : (i) Bokaro Steel Plant in Jharkhand. (ii) Bhilai Steel Plant in Chhattisgarh.

Description : Which of the following is/are wrong? 1. Bhadravati steel plant - not located near coal deposits 2. First modern steel plant in India - Burnpur 3. Bokaro and Bhilai steel plants - German collaboration 4. Durgapur steel plant - British help (a) 1 and 2 (b) 2, 3 and 4 (c) 1, 2 and 3 (d) 2 and 3

Last Answer : Ans: (d)

Description : Where is Visvesvaraya Iron and Steel Limited located ? How has this steel plant overcome the -Geography

Last Answer : Visvesvaraya Iron and Steel Ltd. is located at Bhadrawati on the banks of river Bhadrawati in Shimoga district of Karnataka. This steel plant has overcome the disadvantage of not being located ... and using it for smelting. Now, it uses hydroelectric power obtained from Sharavati Power Project.

Description : (a) 1. Name the private sector iron and steel plant of India. [2] 2. From where does it get its supply of: 1. Iron ore 2. Manganese 3. Coal? -Geography

Last Answer : 1. Tata Iron and Steel Industry, Jamshedpur. 2. 1. Iron Ore: Singhbhum, Mayurbhanj. 2. Manganese: Noamundi. 3. Coal: Jharia.

Description : Mention two advantages that a mini steel plant has over an integrated iron and steel plant. -Geography

Last Answer : Advantages of Mini steel plants are: 1. They use the electric arc furnace and thus conserve coal. 2. They require small capital investment. 3. They cater to the local need of the market and the cost of transport is reduced.

Description : Name one integrated iron and steel plant in the private sector. Where does it obtain its iron and coal from ? -Geography

Last Answer : Integrated steel plant in private sector is Tata Iron and Steel Company (TISCO). It obtains its iron from Singhbhum and Mayurbhanj and coal from Jharia.

Description : With reference to the Bokaro Steel Plant, from where does it get its (i) coal (ii) iron ore (iii) water supply ? -Geography

Last Answer : (i) Coal from Bokaro and Jharia coal fields. (ii) Iron ore from Bonaigarh, Kiriburu and Noamundi in Orissa. (iii) Water supply from River Damodar.

Description : (i) Mention two characteristics of a mini steel plant. (ii) From where does the integrated steel plant at Jamshedpur get its iron ore and coal ? -Geography

Last Answer : (i) Two characteristics of a mini steel plant are : 1. They use cheaply available scrap iron. 2. They use electric furnaces therefore cause no pollution. (ii) Jamshedpur plant get its iron ore from Singhbhum and Mayurbhanj. It get its coal from Jharia and Raniganj.

Description : Name an iron and steel plant of Tamil Nadu. -Geography

Last Answer : India is the fourth largest producer of crude steel. The steel plants are mainly concentrated in Jharkhand and West Bengal region. Salem Steel Plant is in Tamil Nadu.

Description : The Iron & Steel Industry at which of the following places was developed with German technical collaboration? (1) Durgapur (2) Bhilai (3) Rourkela (4) Bhadravati

Last Answer : (3) Rourkela Explanation: Rourkela Steel Plant (RSP), the first integrated steel plant in the public sector in India, was set up with German collaboration with an installed capacity of 1 ... where 100% of slabs are produced through the cost-effective and quality-centeric continuous casting route.

Description : Name two centres of integrated iron and steel industry in India. -Geography

Last Answer : The integrated iron and steel industries are: (a) Tata Iron and Steel Company, Jamshedpur. (b) The Hindustan Steel Limited, Bhilai.

Description : Explain how the following have played a part in the location of the Tata Iron and Steel Company: (i) Raw materials. (ii) Transport. -Geography

Last Answer : The Tata Iron and Steel Co. The Iron and Steel Industry is primarily a rawmaterial oriented industry using cheap and weight loosing raw materials. (i) Raw Materials : High grade haematite ... enjoys good transport facilities. Kolkata located at a distance of 240 kms, provides port facilities.

Description : Where do the following iron and steel plants get their supply of iron ore from? -Geography

Last Answer : 1. Durg district of Chhattisgarh 2. Bailadila

Description : ‘The Iron and Steel industry constitutes the backbone of modem industrial economy.’ Give two reasons to justify the statement. -Geography

Last Answer : Iron and steel industry is called the basic industry because : • It is the industry which lays the foundation of rapid development of other industries such as heavy engineering, defence equipment, automobiles, aeroplanes, etc. • It is also helpful in providing employment.

Description : Explain three reasons as to why there is a large concentration of iron and steel plants in the Chota Nagpur region. -Geography

Last Answer : Three reasons for large concentration of iron and steel plant in Chota Nagpur Region : (i) Availability of raw iron ore (ii) Availability of coal (iii) Availability of cheap labour

Description : Which iron and steel industry of India is located away from the main coal areas ? What is the main source of energy in the absence of coal ? -Geography

Last Answer : Visveswaraya Iron and Steel Limited is located away from the main coal areas. Its main source of energy earlier was charcoal but now it uses Hydroelectric Power from Mahatma Gandhi and Sharavati Hydroelectric power station.

Description : “Iron and steel industry is called a basic industry”. Examine the statement -Geography

Last Answer : (i) The iron and steel industry forms the base of all other industries, so it is called a basic industry. It provides raw material for other industries such as machine tools used for ... easily brought near ports. In mini steel plants/mills access to markets is more important than inputs.

Description : Explain responsible factors for the development of Iron and steel industry in Eastern India. -Geography

Last Answer : (i) Location of industries is influenced by several factors like access to raw materials, power, market, capital, transport and labour. There is strong relationship between raw material and type of ... in high grade iron ore and coking coal and other supplementing raw material, power and water.

Description : ‘’India is important to iron and steel producing country in the world yet, we are not able to perform our full potential. Comment on this statement. -Geography

Last Answer : India is the 4th largest producer of crude steel in the world. The challenges faced by this industry are : 1. Coking coal has limited availability and also is costly. 2. The labour has ... need of Steel policy similar to that of National Jute policy and work accordingly to increase the yield.

Description : Why does the north-eastern part of the Peninsular Plateau region have the maximum concentration of iron and steel industries? -Geography

Last Answer : The most basic industry is the Iron and steel industry as all the industries are depended on this industry for their machinery. Iron and Steel is an important metal because it is used for ... of energy and poor infrastructure. But the availability of steel is enough to meet the domestic demand.

Description : Bhilai Steel Plant was built with collaboration of – (1) Germany (2) Soviet Union (3) United Kingdom (4) Japan

Last Answer : (2) Soviet Union Explanation: Bhilai Steel Plant, located in Bhilai, Chhattisgarh, is India's first and main producer of steel rails, as well as a major producer of wide steel plates and a variety of ... Ovens and Coal Chemical Plants. This steel plant was set up with the help of the USSR in 1955.

Description : Explain the following : (i) Weight losing raw material. (ii) Integrated steel plant. -Geography

Last Answer : (i) Raw materials which lose their weight in the process of manufacture are known as weight losing raw materials, e.g., sugar industry, iron and steel industry, aluminum industry. (ii) ... furnace to steel making followed by shaping of the metal by rolling is carried out under one complex.

Description : Enumerate three factors favouring the location and growth of Hindustan Steel Plant at Durgapur. -Geography

Last Answer : Three factors favouring location and growth of Hindustan Steel Plant are : (i) The Hydroelectricity required for the plant is readily available from DVC. (ii) Iron ore is available from Bolani and Mayurbhanj mines. (iii) Water is available from Durgapur Barrage across the Damodar river.

Description : Mention three advantages that a mini steel plant has over an integrated steel plant. -Geography

Last Answer : Advantages of Mini steel plants are : 1. They use the electric arc furnace and thus conserve coal. 2. They require smart capital investment. 3. They cater to the local need of the market and the cost of transport is reduced.

Description : (i) How is it advantageous for a mini steel plant— (1) to use electric furnaces (2) not to be located close to the location of the raw material ? -Geography

Last Answer : (i) (1) Mini Steel Plants use electric furnaces as it becomes easy for these plants scatter all over the country, and coal is also conserved. (2) These steel plants are not located close to the ... Bhilai gets its Iron from Dalli-Rajhare Mines and Coal from Kargati of M.P., Bokaro and Jharia also.

Description : What is the raw material in a steel plant? -Geography

Last Answer : The raw materials used in a steel plant are Iron Ore, Coking coal and limestone in the ratio of 4:2:1. A small quantity of manganese is also used.

Description : How are integrated steel plant different from mini steel plants? What problem does the industry face? -Geography

Last Answer : Manganese is mainly used in the manufacturing of Steel. The Iron and steel industries are the basic industry as rest all other industries are dependent on them. Steel is used in the manufacturing of goods, ... it. 3. As steel products are needed in every other sector too, its demand has increased.

Description : Border road organisation (BRO) was established in which year? -Geography

Last Answer : Border Roads Organisation is an undertaking of Government of India which constructs and maintains the roads in the bordering areas of the country. It was established in 1960 for the development of roads in terms of strategic importance.

Description : What happens when industries are established in backward regions? -Geography

Last Answer : Manufacturing industries are pivotal in boosting the economy of a nation, rather could be said that industries form the backbone of the nation. These manufacturing industries produce products that are ... public services like roads, schools, hospitals are built which prove useful to the people.

Description : Name the Steel projects in the public sector which were not set up with foreign collaboration. -SST 10th

Last Answer : The Visvesvaraya Iron and Steel Plant at Bhadravati in Karnataka and the Indian Iron and Steel Company at Burnpur and Kulti in West Bengal.

Description : Name the steel plants that were set up with Russian collaboration. -SST 10th

Last Answer : Two steel plants are: (i) Bokaro (ii) Bhilai

Description : State two advantages that mini steel plants have over large integrated steel plants. -Geography

Last Answer : Mini steel plants have the following advantages over large integrated steel plants : 1. These are easy to construct and operate. 2. Mini steel plants have shorter gestation period than large ... are located far away from the integrated steel plants to meet the local demands in that area.

Description : State any three advantages of setting up Mini steel plants. -Geography

Last Answer : The three advantages are : 1. It is easy to construct such a plant as its gestation period is short. 2. It needs less capital investment. 3. It uses electric furnace for processing which is eco-friendly.

Description : Mention two reasons for the concentration of steel plants in the Chota-Nagpur Plateau region -Geography

Last Answer : Two reasons for the concentration of steel plants in the Chota Nagpur plateau region are : – (i) Availability of iron ore and coal. (ii) Cheap labour available from Bihar and Jharkhand.

Description : How many new integrated steel plants were set up in India during second five year plan 1956-61? -Geography

Last Answer : Three new integrated steel plants were set up in second five year plant. (i) Rourkela (ii) Bhilai and Durgapur Steel plants.

Description : Which rank does India hold in terms of production of steel, chemical, jute, and sugar? -Geography

Last Answer : India is the largest producer of jute, but it is the second largest exporter of jute after Bangladesh. India is the second largest producer of Sugar in the world. India is the 4th largest producer of crude steel. India is the 12th largest producer of Chemicals in the world and ranks third in Asia.

Description : Why is the Steel Authority of India said to be a Public Sector Undertaking? -Geography

Last Answer : The most basic industry is the Iron and steel industry as all the industries are depended on this industry for their machinery. Steel is an important metal because it is used for manufacturing ... markets, also known as Tata Iron and Steel Company Limited sell their produce through Tata steel.

Description : What are the major iron ore belts in India? -Geography

Last Answer : Orissa Jharkhand Belt: Badampahar mines in the Mayurbhanj and Kendujhar districts of Orissa have high grade hematite ore. Additionally, hematite iron ore is mined in Gua and Noamundi in Singhbhum district ... ores in these mines are not of very high quality. They are exported through Marmagao port.

Description : (i) What is the significance of the coal deposits of Chhattisgarh ? (ii) Which country import the iron ore deposits of Chhattisgarh ? -Geography

Last Answer : (i) They are used in the iron and steel industries of Eastern India and also a major item of export. (ii) China.

Description : Give the names of four important types of iron ore found in India -Geography

Last Answer : Magnetite, Hematite, Limonite and Siderite.

Description : State the most important use of the following : (i) Iron ore (ii) Bauxite -Geography

Last Answer : Most important use of: (i) Iron ore : In the production of steel. (ii) Bauxite: In the production of aluminium.

Description : (i) Name two varieties of iron ore used in industry. -Geography

Last Answer : (i) Haematite and Magnetite (ii) Low grade iron ore is used in mini steel plants.

Description : (a) What grade of iron-ore is mostly mined in India ? Name two leading iron-ore producing states. -Geography

Last Answer : (a) Hematite and Magnetite states grade of iron ore is mostly found in India. Two leading iron ore producing states are Orissa and Jharkhand. (b) Lignite is a poor quality coal which has 60% of carbon ... . It is used as raw material in cement industry and 2. As flux in iron and steel industry.

Description : Name one centre in each of the following states where iron is mined : -Geography

Last Answer : (i) Orissa: Iron is mined at Keonjhar. (ii) Jharkhand: Iron is mined at Singhbhum.

Description : Name the different types of iron ore found in India. Which is the best quality iron ore ? -Geography

Last Answer : Different types of iron ore found in India are: (i) Hematite (ii) Magnetite (iii) Limonite Magnetite is the best quality of iron as it contains more than 70% of iron.

Description : (a) (i) Name the different types of iron ore found in India. -Geography

Last Answer : (a) (i) Different types of iron ore found in India are: 1. Anthracite 2. Bituminous 3. Lignite 4. Peat (b) An important coal producing state is Jharkhand. Coalmine—Bokaro (c) Answer has not given due to out of present syllabus. (d) Two uses of Limestone: Cement and Iron and Steel.

Description : Name any two iron-ore exporting ports of India. -Geography

Last Answer : The two ports exporting iron in India are the Marmagao port (Goa) and New Mangalore port. Marmagao port exports about fifty per cent of iron ore export goods. New Mangalore Port in Karnataka caters to the export of iron ore concentrates from Kudremukh mines.

Description : What are the main qualities of iron ore deposit in India? -Geography

Last Answer : The rocks and minerals from which metallic iron can be economically extracted is called iron ore. This mineral is used to make pig iron which in turn is used to make steel making it the ... and time required in the formation of minerals have led to this uneven distribution of minerals in India.

Description : Processing of which minerals release huge amount of dust in the atmosphere? 1 a) Sandstone b) Iron ore c) Limestone d) Bauxite 15. -Geography

Last Answer : C) Limestone

Description : Where was the first iron and steel industry of India established? -General Knowledge

Last Answer : answer: