Name two industrial products of the Gujarat Industrial Region. -Geography

Name two industrial products of the Gujarat Industrial Region. -Geography
by

1 Answer

Answer :

Textiles (cotton, silk and synthetic fibres) and petrochemicals are the most important industrial products of the Gujarat industrial region.
by

Related questions

Describe the maki features of Gujarat Industrial Region. -Geography

Description : Describe the maki features of Gujarat Industrial Region. -Geography

Last Answer : (i) The nucleus of this region lies between Ahmedabad and Vadodara, it extends upto Valsad and Surat. (ii) The development of this industrial region is mainly due to the cotton textile ... Jamnagar. (v) Petroleum refinery at Koyali provided raw materials to a host of petrochemical industries.

Mention two reasons for the development of the Bengaluru-Tamil Nadu Industrial Region. -Geography

Description : Mention two reasons for the development of the Bengaluru-Tamil Nadu Industrial Region. -Geography

Last Answer : Bengaluru - Tamil Nadu Industrial Region has experienced the fastest industrial growth in the post-independence era as : 1. This region is dominated by the cotton textile industry but, over ... climate and proximity to vast local markets have favored the concentration of industries in this region.

The Chhota Nagpur Industrial Region is also known as the ‘Ruhr of India’. Give two reasons to explain why ? -Geography

Description : The Chhota Nagpur Industrial Region is also known as the ‘Ruhr of India’. Give two reasons to explain why ? -Geography

Last Answer : The Chota Nagpur industrial region is also known as the Ruhr of India' because : Different types of minerals like coal, iron ore, bauxite, mica, etc., are available in this region ... helped in the development of different types of mineral-based industries like iron and steel industry, etc.

Name a major industrial region of India and state any three factors that are responsible for the growth of this region. -Geography

Description : Name a major industrial region of India and state any three factors that are responsible for the growth of this region. -Geography

Last Answer : Mumbai-Pune Industrial region is a major industrial hub of India. Three factors responsible for the growth of this industrial region are : (i) The region is well ... engineering goods, oil refineries, petrochemicals, fertilizers, shipbuilding and automobile industries are also developed.

Distinguish between a major industrial region and a minor industrial region. -Geography

Description : Distinguish between a major industrial region and a minor industrial region. -Geography

Last Answer : Major Industrial Region Minor Industrial Region 1. It is the region with a minimum daily factory working force of 1-5 lakh. It is the region with a minimum daily factory working ... example - Gujrat Industrial Region, Mumbai Pune Industrial Region. For example - Jaipur-Ajmer Industrial Region.

Name any two industrial products for which limestone is used as a source of raw material. -Geography

Description : Name any two industrial products for which limestone is used as a source of raw material. -Geography

Last Answer : Two industrial products for which limestone is used: 1. Iron and steel industry 2. Cement industry

Discuss any two factors which have influenced Ahmedabad to develop as the largest centre of cotton textile industry in Gujarat. -Geography

Description : Discuss any two factors which have influenced Ahmedabad to develop as the largest centre of cotton textile industry in Gujarat. -Geography

Last Answer : Ahmedabad is the largest centre of cotton textile in Gujarat and the second-largest centre after Mumbai. 1. Ahmedabad lies near the main cotton-growing region of India and there is no problem of ... Even the mills produce cheap cloth. This cloth finds ready market amongst the poor masses of India.

which river project faced the public agitation in Gujarat? -Geography

Description : which river project faced the public agitation in Gujarat? -Geography

Last Answer : Sabarmati -basin The Sabarmati-basin farmers had agitated because the water supply was provided to urban areas even at the time of drought and it became difficult for them to irrigate.

Name any two minor industrial regions of India. -Geography

Description : Name any two minor industrial regions of India. -Geography

Last Answer : Mumbai – Pune Industrial Region. Bengaluru – Tamil Nadu Industrial Region.

(a) Define industrial clusters. (b) State any two indices used to identify industrial clusters. -Geography

Description : (a) Define industrial clusters. (b) State any two indices used to identify industrial clusters. -Geography

Last Answer : (a) Industrial clusters are groups of interrelated industries that drive wealth creation in a region, primarily through export of goods and services. (b) The two indices are : 1. Quantum of power used for 2. Total Industrial Output.

What are industrial clusters ? State any two indices used to identify industrial clusters. -Geography

Description : What are industrial clusters ? State any two indices used to identify industrial clusters. -Geography

Last Answer : Industrial Cluster: Industries are unevenly distributed in India because the factors affecting industrial location are not same everywhere. Industries tend to be concentrated in a few pockets because of ... factory employment/No. of workers. 2. Quantum of power used for industrial purposes.

Explain how industrial inertia is a factor affecting the location of industries. Give two examples. -Geography

Description : Explain how industrial inertia is a factor affecting the location of industries. Give two examples. -Geography

Last Answer : Industries tend to develop at the place of their original establishment though the original cause has already disappeared. A good example the Lock industry at Aligarh and Bidi industry at Jabalpur.

‘The Iron and Steel industry constitutes the backbone of modem industrial economy.’ Give two reasons to justify the statement. -Geography

Description : ‘The Iron and Steel industry constitutes the backbone of modem industrial economy.’ Give two reasons to justify the statement. -Geography

Last Answer : Iron and steel industry is called the basic industry because : • It is the industry which lays the foundation of rapid development of other industries such as heavy engineering, defence equipment, automobiles, aeroplanes, etc. • It is also helpful in providing employment.

Why do Mexico and other countries in Central America lag behind in industrial development? -Geography

Description : Why do Mexico and other countries in Central America lag behind in industrial development? -Geography

Last Answer : They lag behind in industrial development because most of these countries are small and do not have adequate power resources and raw materials needed for industrial development.

Mention any three major industrial regions of Japan. -Geography

Description : Mention any three major industrial regions of Japan. -Geography

Last Answer : There are four major industrial regions in Japan. 1. The Keihin Region is the greatest industrial region of Japan. It includes by Tokyo, Kawasaki and Yokohama cities. The important industries ... Yawata, Kokura and Mji. The industries are steel, ship-building, machinery, chemicals and textiles.

Explain the relationship between transport and industrial development. -Geography

Description : Explain the relationship between transport and industrial development. -Geography

Last Answer : Transport and Industry are closely related to each other. Cheap and efficient transport is essential for localization and growth of industries. Transporting facilities are required for carrying raw ... ports were connected with their surrounding areas by a close network of roads and railways,

(i) What is the importance of transport as an infrastructural resource to industrial economy ? -Geography

Description : (i) What is the importance of transport as an infrastructural resource to industrial economy ? -Geography

Last Answer : (i) The importance of transport as an infrastructural resource to industrial economy are : 1. It is the basic economic arteries and provides an important link between production and consumption. It plays a key ... of roads in India are : 1. Flat level land. 2. High density of population.

Give a reason for each of the following 1. Trees must be planted in the industrial area. -Geography

Description : Give a reason for each of the following 1. Trees must be planted in the industrial area. -Geography

Last Answer : 1. Trees absorb carbon dioxide and releases oxygen. 2. The organic fertilizer can be used instead of chemical fertilizers and is better specially when used for vegetables. It increases the ... non-biodegradable waste that contain the material which does not breakdown or decompose in the soil.

State an important industrial use of :1. Manganese 2. Coal 3. Aluminum -Geography

Description : State an important industrial use of :1. Manganese 2. Coal 3. Aluminum -Geography

Last Answer : 1. Iron and Steel manufacturing 2. Iron and Steel manufacturing 3. Use to making pots and pans because good conductor of heat.

Name an agro-based industry based in the following industrial centres: -Geography

Description : Name an agro-based industry based in the following industrial centres: -Geography

Last Answer : Agro based industries are : Ahmedabad—Cotton industry Mysore—Silk industry

What industrial product are the following centres noted for ? -Geography

Description : What industrial product are the following centres noted for ? -Geography

Last Answer : (i) Gurgaon—Maruti Car (ii) Perambur—The Integral Coach Factory (iii) Chittaranjan—Chittaranjan Locomotive Works.

What is the importance of the Heavy Engineering industry for the industrial development of India ? -Geography

Description : What is the importance of the Heavy Engineering industry for the industrial development of India ? -Geography

Last Answer : Heavy Engineering industry is important for industrial development of India because it not only provides machinery for industries but also equipments for transport, agriculture, mining, construction etc. Two ... industrial units : (1) Ship building industries. (2) Railway locomotive industries.

What are the ways of treating industrial effluents? -Geography

Description : What are the ways of treating industrial effluents? -Geography

Last Answer : To minimize the effects of pollution The hot waters and effluents could be treated before releasing it into the rivers. This treatment could be done in 3 phases: 1. Primary treatment: By ... indigenous, water-borne micro-organisms. 3. Tertiary: The wastewater is recycled in the tertiary stage.

The twin aim of industrial development along with conservation of the environment is not an impossible task. Comment on this statement. -Geography

Description : The twin aim of industrial development along with conservation of the environment is not an impossible task. Comment on this statement. -Geography

Last Answer : Though Industrialisation is part of globalization we cannot ignore the harmful effect of it upon the environment is possible. The effects of Industrialisation: 1. The pollutions namely air, water ... into practice in order to save the atmosphere from depleting and the environment from degradation.

Explain three phases by which treatment of industrial effluents can be done. -Geography

Description : Explain three phases by which treatment of industrial effluents can be done. -Geography

Last Answer : To reduce the use of water by using it more than two times by reusing and recycling it. To meet the water requirements, make use of rainwater harvesting. Before releasing wastewater and industrial effluents ... air. By using oil or gas rather than coal, smoke could be reduced to a certain extent.

(i) What is a Planning Region? (ii) Mention any two characteristics of a planning region. -Geography

Description : (i) What is a Planning Region? (ii) Mention any two characteristics of a planning region. -Geography

Last Answer : (i) A planning region is a self-created living organism, having a lifetime which not only supports the life in the region but also radiates unifying forces that enable the region to be a unified ... should be flexible. 3. There should be natural cohesion. 4. It should have economic harmony

(i) What is a planning region ? (ii) Mention two characteristics of a planning region. -Geography

Description : (i) What is a planning region ? (ii) Mention two characteristics of a planning region. -Geography

Last Answer : (i) A planning region is a self-created living, having a lifetime which not only supports the life in the region but also radiates unifying forces that enable the region to be a unified ... Single-level Planning done at the national level. 2. Process is is divided into small territorial unit

Name any two narrow gauge railway lines present in the Himalayan region. -Geography

Description : Name any two narrow gauge railway lines present in the Himalayan region. -Geography

Last Answer : Two narrow-gauge railway lines present in the Himalayan region are : 1. Kalka to Simla 2. Siliguri to Darjeeling.

What are the two main causes for an increase in the number of high population density areas in the Indian region ? -Geography

Description : What are the two main causes for an increase in the number of high population density areas in the Indian region ? -Geography

Last Answer : The two main causes for an increase in the number of high population density areas in the Indian region are : 1. The large scale migration of people from the surrounding ... People migrate to urban areas because of availability of better educational facilities especially that higher education.

(i) What is a planning region ? (ii) Mention any two characteristics of a planning region. -Geography

Description : (i) What is a planning region ? (ii) Mention any two characteristics of a planning region. -Geography

Last Answer : (i) A planning region refers to an area which is the main focus of efficient placement of infrastructure and zoning for sustainable growth. (ii) Two characteristics of a planning region are: 1 ... , social and economic issues of a region. 2. It aims at optimum utilisation of resources.

(i) Name two important minerals forming the resource base of the Chhattisgarh region. -Geography

Description : (i) Name two important minerals forming the resource base of the Chhattisgarh region. -Geography

Last Answer : (i) . Iron ore, bauxite, limestone and dolomite, (ii) The technique of silk production is called sericulture. Sericulture is a labour intensive industry and provides employment to a large number ... sericulture has become an important industry to this region. (iii) Tussar silk and Mulberry silk.

Give two reasons for the importance of the jute industry in the GangaBrahmaputra delta region. -Geography

Description : Give two reasons for the importance of the jute industry in the GangaBrahmaputra delta region. -Geography

Last Answer : Two reasons for the importance of the jute industry in the Ganga-Brahmaptra delta region are : (i) Raw material is easily available, as jute is grown in Ganga delta. (ii) The hot and humid climate is favourable for spinning and weaving.

Name a region which has natural gas deposits. Mention two uses of natural gas. -Geography

Description : Name a region which has natural gas deposits. Mention two uses of natural gas. -Geography

Last Answer : Assam, Mumbai High are some gas producing regions. Two uses of Natural Gas : 1. Natural Gas is used as the most important fuel (as cooking gas and also as fuel for vehicles). 2. It is used in the chemical fertilizers.

Mention two reasons for the concentration of steel plants in the Chota-Nagpur Plateau region -Geography

Description : Mention two reasons for the concentration of steel plants in the Chota-Nagpur Plateau region -Geography

Last Answer : Two reasons for the concentration of steel plants in the Chota Nagpur plateau region are : – (i) Availability of iron ore and coal. (ii) Cheap labour available from Bihar and Jharkhand.

Give two reason for variation of the degree of commercialisation of agriculture from region to region. -Geography

Description : Give two reason for variation of the degree of commercialisation of agriculture from region to region. -Geography

Last Answer : India is predominantly an agricultural country. Different forms of agriculture are practiced in the country which depends upon a variety of physical, environmental and socio-economic conditions. The ... for a variety of plantations like rubber, bamboo etc.. which have commercial purposes.

Why is the Thundra region (Arctic coastal areas) have very sparse vegetation. -Geography

Description : Why is the Thundra region (Arctic coastal areas) have very sparse vegetation. -Geography

Last Answer : Because this belt is mostly covered by snow and ice. Only Mosses and Lichens grow in this belt.

Explain the meaning of a planning region. -Geography

Description : Explain the meaning of a planning region. -Geography

Last Answer : A planning region is a self-created living organism having a lifetime which not only supports the life in the region but also radiates unifying forces that enable the region to be a unified regional space so as to facilitate the practice of regional planning.

What is a micro region ? Give an example of it. -Geography

Description : What is a micro region ? Give an example of it. -Geography

Last Answer : The micro-regions are the smallest of all planning regions and have the potential for development of at least one specialization of production cycle of great significance. Example: agriculture in Punjab, tourism in Jammu and Kashmir.

Why does the need for the development of a region arise ? Give any three points in support of your answer. -Geography

Description : Why does the need for the development of a region arise ? Give any three points in support of your answer. -Geography

Last Answer : The development of a region is required to improve economic, social, political and environmental conditions of the society present in the region. The development helps to increase general productivity ... income, efficiency of a worker, elimination of poverty and improvement in quality of life.

Which river drains into the Chhattisgarh basin ? What is the predominant crop of this region ? -Geography

Description : Which river drains into the Chhattisgarh basin ? What is the predominant crop of this region ? -Geography

Last Answer : Mahanadi, Godavari and Indrawati. The predominant crop is rice.

Define the term micro-region. Name any one micro-region in India. -Geography

Description : Define the term micro-region. Name any one micro-region in India. -Geography

Last Answer : A micro-region is defined as a territorial area smaller than the state to which it belongs but larger than a municipality and also has the potential for developing at least one specialisation of production of cycle. Agriculture in Punjab and the Hilly region in U.P. is an example of a micro-region.

What is an economist’s contribution to the development of a region ? -Geography

Description : What is an economist’s contribution to the development of a region ? -Geography

Last Answer : The largest contribution to the study of development has been made by economists. An economist looks at development in terms of economic progress, which is expressed in terms of enhancement ... in the formulation of theories and models and have earned greater acceptability in policy formulation.

(i) Name the agro-based industry located near the Deccan Trap region. -Geography

Description : (i) Name the agro-based industry located near the Deccan Trap region. -Geography

Last Answer : (i) Cotton textile industry. (ii) 1. Cheap HEP is readily available from the region of western ghats. 2. Humid climate helps prevent the breaking of the yarn/thread.

Discuss the importance of the Haldia Planning Region under the following headings : (i) Location of the main centre. -Geography

Description : Discuss the importance of the Haldia Planning Region under the following headings : (i) Location of the main centre. -Geography

Last Answer : (i) Haldia is located at the confluence of rivers Hooghly and Haldia about 105 kms downstream from Kolkata. (ii) Haldia port has been developed to release congestion at the Kolkata ... , Assam, Arunachal Pradesh, Nagaland, Manipur, Mizoram, Meghalaya, Tripura and Northern parts of Chhattisgarh.

What is the difference between a micro-planning region and a meso-planning region? -Geography

Description : What is the difference between a micro-planning region and a meso-planning region? -Geography

Last Answer : Micro-planning regions are the smallest of all planning regions and have the potential for developing at least one specialization of production cycle of great significance. A region that possesses ... bond. Unlike micro-regions, mesoregions are multipurpose regions, e.g., Damodar Valley Basin.

What is soil conservation? State a method of soil conservation in the: 1. Arid and Semi-Arid region. -Geography

Description : What is soil conservation? State a method of soil conservation in the: 1. Arid and Semi-Arid region. -Geography

Last Answer : Soil erosion is the removal of soil by the forces of nature, particularly wind and water. Soil erosion mainly takes place due to man’s activities such as deforestation, overgrazing of cattle, faulty methods of cultivation. 1. Aforestation, Restricting grazing of animals 2. Constructing dams

How do forests— (i) have a favourable effect on the climate of the region ? (ii) act as a flood control measure ? -Geography

Description : How do forests— (i) have a favourable effect on the climate of the region ? (ii) act as a flood control measure ? -Geography

Last Answer : (i) Forests temper’s down the temperature and helps in bringing rain. (ii) Forests bind the soil particles by their roots and absorbs water.

How do forests— (i) have a favourable effect on the climate of the region ? -Geography

Description : How do forests— (i) have a favourable effect on the climate of the region ? -Geography

Last Answer : (i) Forests temper’s down the temperature and helps in bringing rain. (ii) Forests bind the soil particles by their roots and absorbs water.

Mention three factors that have helped the sugar industry flourish in the peninsular region rather than in the northern regions of India. -Geography

Description : Mention three factors that have helped the sugar industry flourish in the peninsular region rather than in the northern regions of India. -Geography

Last Answer : Three factors that have helped sugar industry flourish in peninsular region are : (i) Peninsular region has tropical climate which is ideal for growing sugarcane. (ii) Soil is well drained and consists of black regur soil. (iii) Mills are close to the farms so there is no loss of sucrose.

(i) Name one region in India for each of the following: -Geography

Description : (i) Name one region in India for each of the following: -Geography

Last Answer : (i) (1) Tidal forests—Deltas of the Ganga, Mahanadi, Godavari, Krishna and Kaveri. (2) Thorn and Scrub forest—Rajasthan and Gujarat. (ii) Thorn and scrub forest are found in the above region because these areas get less than 25 cm of rainfall and average temperature of 25°C-27°C.