Description : Zeolite used in water softening process (cation exchange) is regenerated by washing with (A) Brine (B) Chloramines (C) Sodium bisulphite (D) Liquid chlorines
Last Answer : (A) Brine
Description : Cooking liquor in case of sulphite process is (A) Sodium sulphite and sodium bisulphite (B) Magnesium sulphite and free SO2 in acid medium (C) Magnesium sulphate and magnesium bicarbonate (D) None of these
Last Answer : (A) Sodium sulphite and sodium bisulphite
Description : The most commonly used substance to speed up the sedimentation of sewage is (A) Lime (B) Sulphuric acid (C) Chlorine (D) Sodium bisulphite
Last Answer : (A) Lime
Description : Corrosion in boilers can be prevented by (A) Deaeration of feed water (B) Enhancing pH of feed water by adding alkali (C) Feeding sodium sulphite or hydrazine phosphate to the boilers, which combines with oxygen and prevents corrosion (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : . Dechlorination of treated water is necessary to (A) Remove residual turbidity (B) Reduce the bacterial load on filter (C) Control taste and odour (D) Remove chlorinous taste
Last Answer : (D) Remove chlorinous taste
Description : In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (B) Gas
Description : In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B
Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B
Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Use of baffles in agitators help in minimising the __________ tendency. (A) Swirling (B) Vortexing (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (A) Ultra
Description : Corrosion involves exchange of electrons in __________ corrosion. (A) Chemical (B) Electrochemical (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (A) Abrasive
Description : Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b
Last Answer : (C) Both 'a' & 'b
Description : Diffusion in concentrated solutions differs from that in dilute solutions, because of the change in the __________ with the concentration of the solution. (A) Degree of ideality (B) Viscosity (C) Both 'a '& 'b' (D) Neither 'a' nor 'b'
Last Answer : (C) Both 'a '& 'b
Description : In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (B) Liquid
Description : The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (A) Plug
Description : The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (B) Perfectly mixed
Description : Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : In case of constant underflow extraction operation, the __________ atall solute concentration. (A) Solids are drained to the same extent (B) Ratio of the insoluble to solution is constant (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Nusselt number (for forced convection heat transfer) is a function of the __________ number. (A) Prandtl (B) Reynolds (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Kirchoff’s law applies to __________ radiation. (A) Total (B) Monochromatic (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : . A perfect black body is a perfect __________ of radiation. (A) Absorber (B) Emitter (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Very __________ coals are completely devoid of cokability i.e., it is non-coking. (A) Young (B) Mature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b
Last Answer : (C) Both 'a' & 'b'
Description : Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : The rate of shear versus the shear stress curves are time dependent for __________ fluid. (A) Thixotropic (B) Rheopectic (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : . A Rotameter works on the principle of __________ pressure drop. (A) Constant (B) Variable (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (A) Constant
Description : Velocity head on sudden enlargement in a horizontal pipe is converted into __________ head. (A) Elevation (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (B) Pressure
Description : With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (B) Conversion
Description : Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : The single parameter model proposed for describing non-ideal flow is the __________ model. (A) Tank in series (B) Dispersion (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Chemical kinetics can predict the __________ of a chemical reaction. (A) Rate (B) Feasibility (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (A) Rate
Description : In a CSTR __________ varies with time. (A) Reaction rate (B) Concentration (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (D) Neither (A) nor (B)
Description : If an ideal solution is formed by mixing two pure liquids in any proportion, then the __________ of mixing is zero (A) Enthalpy (B) Volume (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'
Description : In any spontaneous process, the __________ free energy decreases. (A) Helmholtz (B) Gibbs (C) Both ‘a’ & ‘b’ (D) Neither 'a' nor 'b'
Last Answer : (C) Both ‘a’ & ‘b’
Description : For a constant volume process __________ by the system is used only to increase the internal energy. (A) Heat absorbed (B) Work done (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (B) Work done
Description : he gas law (PV = RT) is true for an __________ change. (A) Isothermal (B) Adiabatic (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Trouton's ratio of __________ liquids is calculated using Kistyakowsky equation. (A) Polar (B) Non-polar (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (B) Non-polar
Description : Optical activity is a/an __________ property. (A) Additive (B) Constitutive (C) Both (A) & (B) (D) Neither (A) nor (B)
Description : Work study deals with the __________ study. (A) Time (B) Motion (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : C) Both (A) & (B)
Description : The effect of friction on the flow of steam through a nozzle is to decrease the __________ of steam. (A) Wetness (B) Mass flow rate (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'
Description : The 'shanks system' of leaching (i.e., counter-current multiple contact leaching) is used for (A) Recovery of tannis from the tree barks and woods (B) Leaching sodium nitrate from Chilean nitrate bearing rock (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)
Description : Visco-elastic behaviour exhibited by plastics is a __________ like behaviour. (A) Solid (B) Liquid (C) Combination of solid & liquid (D) Neither solid nor liquid
Last Answer : (C) Combination of solid & liquid
Description : Deaeration (removal of O2 ) of water is done by (A) Rectification (B) Absorption (C) Ion-exchange (D) Adsorption
Last Answer : (C) Ion-exchange
Description : Deaeration of high pressure boiler feed water is done to reduce (A) Foaming from boilers (B) Its dissolved oxygen content (C) Its silica content (D) Caustic embrittlement
Last Answer : (B) Its dissolved oxygen content
Description : Deaeration of water in its treatment is necessary, as it (A) Minimises its turbidity (B) Helps in controlling its taste and odour (C) Minimises its corrosiveness (D) None of these
Last Answer : (C) Minimises its corrosiveness